CVE Notify
19.5K subscribers
4 photos
232K links
Alert on the latest CVEs

Partner channel: @malwr
Download Telegram
๐Ÿšจ CVE-2026-66752
tiny-http through 0.12.0 contains an HTTP request smuggling vulnerability that allows remote attackers to desynchronize request framing by sending a Transfer-Encoding header with any value, including non-chunked codings, which causes the library to unconditionally apply chunk-decoding and discard Content-Length. Attackers can exploit the discrepancy between tiny_http's improper Transfer-Encoding parsing and a correctly-implemented front-end proxy to produce two distinct interpretations of a single byte stream, enabling request smuggling, and can additionally send non-chunked bodies with non-chunked Transfer-Encoding values to cause failed body reads that tie up connections and consume worker threads without signaling errors to clients.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-66753
tiny-http through 0.12.0 contains an HTTP header injection vulnerability that allows attackers to inject carriage return (0x0D) and line feed (0x0A) bytes into HTTP header values on both request and response sides due to insufficient validation in header parsing and serialization. Attackers can exploit this injection primitive to perform response splitting, cache poisoning, session fixation via Set-Cookie injection, security header override, and request smuggling against line-feed-tolerant backends.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-66754
Rouille 0.1.6 through 3.6.2 contains a reachable assertion vulnerability in the Request::remove_prefix function that allows remote unauthenticated attackers to crash the server by sending a crafted percent-encoded URL. Attackers can send a request whose decoded path matches a configured prefix while the raw percent-encoded path does not, causing the assert! to fail and triggering either a 500 error or full process termination depending on the panic configuration.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-67181
Rouille 0.3.3 through 3.6.2 contains an HTTP request smuggling vulnerability that allows remote attackers to desynchronize HTTP message boundaries by exploiting improper header forwarding in the proxy implementation. The proxy in src/proxy.rs forwards the client's Transfer-Encoding header to upstream backends unchanged while transmitting a body already de-chunked by tiny_http, enabling CL.TE desynchronization attacks where attackers control where the backend believes the request body ends.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-7775
IBM Sterling B2B Integrator 6.2.0.0 through 6.2.0.6, 6.2.1.0 through 6.2.1.1_2, and 6.2.2.0 through 6.2.2.0_1 and IBM Sterling File Gateway 6.2.0.0 through 6.2.0.6, 6.2.1.0 through 6.2.1.1_2, and 6.2.2.0 through 6.2.2.0_1 is vulnerable to stored cross-site scripting. This vulnerability allows a privileged user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-16313
A flaw was found in sg3_utils. The sg_inq command, when invoked with the --export option, outputs device identification data without sanitizing control characters in SCSI name string fields. A newline character embedded in a device-supplied name string can inject arbitrary properties into the udev device database. This could allow an attacker who can present a crafted SCSI device to execute arbitrary commands as root when the device is disconnected.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-18084
Improper Neutralization of Input During Web Page Generation vulnerability in BlackBerry UEM Management Console of BlackBerry UEM allows Cross-Site Scripting (XSS).

This issue affects UEM: 12.23.0 QF8 or earlier.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-18085
An Improper Input Validation in the BlackBerry UEM Management Console of BlackBerry UEM 12.23.0 QF8 and earlier allows Arbitrary File Download and Potential Denial of Service.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-51273
In schreibfaul1 ESP32-audioI2S 3.4.5, a heap-based buffer overflow vulnerability exists in the ID3 tag parsing function showID3Tag() of the embedded audio streaming library. The program reads untrusted long ID3 tag value from malicious audio files and uses unbounded appendf() to write formatted strings into ps_ptr heap buffer without length validation. Successful exploitation allows attackers to execute arbitrary code, leak sensitive memory data, cause device crash, or escalate privileges via a crafted malicious audio file.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-51274
In schreibfaul1 ESP32-audioI2S 3.4.5, a heap-based buffer overflow in the ID3v2 SYLT synchronized lyrics parser in audiolib allows remote attackers to cause a denial of service (application crash), information disclosure, or potential arbitrary code execution via a crafted MP3 file. The vulnerability occurs due to missing bounds validation on attacker-controlled frame size and improper memory access during lyric parsing.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-51275
In schreibfaul1 ESP32-audioI2S 3.4.5, a heap-based buffer overflow in the ID3v2 APIC frame parsing function in audiolib allows remote attackers to execute arbitrary code or cause a denial of service (crash) via a crafted MP3 file. The vulnerability exists due to missing length validation when processing the APIC frame size field, leading to an out-of-bounds memory write.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-54332
gopacket provides packet processing capabilities for Go. In version 1.6.0 and earlier, the sFlow ExtendedGatewayFlow decoder in layers/sflow.go reads an attacker-controlled 32-bit community count and AS path member count and sizes a slice allocation from those counts without bounding them against the bytes remaining in the datagram, so a 104-byte UDP datagram can drive an allocation of up to 16 GiB and cause an unauthenticated remote denial of service. This issue is fixed in version 1.6.1.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-54345
gopacket provides packet processing capabilities for Go. In version 1.6.0 and earlier, the Diameter AVP decoder computes an AVP data length by subtracting a fixed header size from an attacker-controlled AVP Length field, so a vendor-flagged AVP whose Length is smaller than the 12-byte header underflows the unsigned 32-bit value and drives an unbounded allocation of roughly 4 GiB, and two such messages in succession OOM-kill a collector, causing an unauthenticated remote denial of service. This issue is fixed in version 1.6.1.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-54603
OAuth2 is a Ruby wrapper for the OAuth 2.0 and 2.1 authorization frameworks, including OpenID Connect (OIDC). From 0.4.0 to 2.0.21, a protocol-relative redirect Location returned to OAuth2::Client#request overrides the request authority, so the bearer Authorization header is sent to an attacker-controlled host, leaking the credential. This issue is fixed in version 2.0.22.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-54605
OAuth is a Ruby wrapper for the OAuth 1.0 and 1.0a protocols, providing clients and servers. From 0.5.5 to 1.1.5, OAuth::Consumer#token_request parses the raw Location header of a 300 to 399 redirect returned by the OAuth server and follows the redirect recursively, which can mutate the consumer's configuration and expose signed OAuth request metadata, including the Authorization header, to a cross-origin host. This issue is fixed in version 1.1.6.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-54619
sqlite3 provides Ruby bindings for the SQLite3 embedded database. In version 2.9.4 and earlier, redefining a SQLite function with a different arity frees the previously registered function handler while SQLite may still reference it, resulting in a use-after-free. This issue is fixed in version 2.9.5.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-54620
sqlite3 provides Ruby bindings for the SQLite3 embedded database. From 2.1.0 to 2.9.4, the callbacks used for SQLite aggregate functions can be freed while still referenced during aggregation, resulting in a use-after-free. This issue is fixed in version 2.9.5.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-67182
Rouille 0.3.3 through 3.6.2 contains an HTTP request smuggling vulnerability that allows remote attackers to bypass access controls by injecting bare line feed characters (0x0A) into client-supplied request header values that are copied verbatim to upstream connections without validation. Attackers can craft a header value containing a complete additional HTTP request that is interpreted as a separate request by backends such as Go net/http and Python http.server, causing the backend to process a smuggled request with attacker-chosen method, path, and headers that bypasses the rouille handler's access control logic.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-67183
TinyWeb through 0.0.8 contains a memory leak vulnerability that allows unauthenticated attackers to exhaust available memory by sending ordinary well-formed HTTP requests. Each request causes HttpParser::execute() to allocate Url objects, HttpHeaders objects, and HttpHeader instances via raw new expressions that are never freed due to missing destructors and unreachable delete calls, causing worker resident memory to grow monotonically by approximately 20 to 28 kB per request until the worker process is killed.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-67184
TinyWeb through 0.0.8 contains a null pointer dereference vulnerability that allows unauthenticated remote attackers to crash worker processes by sending a malformed HTTP request line with an invalid version string. The HttpParser::execute() function fails to allocate the Url object when version parsing fails, leaving the url pointer NULL, and buildResponse() subsequently dereferences this NULL pointer without checking the valid_requ flag, producing a SIGSEGV that terminates the worker process and, when repeated across all workers, takes the server permanently offline until manually restarted.

๐ŸŽ–@cveNotify
๐Ÿšจ CVE-2026-67185
TinyWeb through 0.0.8 contains a path traversal vulnerability that allows unauthenticated attackers to read arbitrary files by submitting ../ sequences in the URL path, which are concatenated directly to the configured web root in HttpBuilder::buildResponse() without normalization, dot-segment removal, or boundary checks. Attackers can craft a single request with ../ sequences that pass through the URL parser unchanged and reach the filesystem call via HttpFile::setFile(), exposing sensitive files such as credential stores and private keys when the server process runs as root.

๐ŸŽ–@cveNotify