🚨 CVE-2026-17072
A flaw was found in GStreamer's gst-plugins-good. A heap-based out-of-bounds read of 4 bytes can occur when parsing FLAC audio stream headers embedded in a Matroska or WebM container file. The vulnerability is triggered by a boundary check that does not account for the full size of the data being copied, allowing a small read past the end of the allocated buffer. An attacker could exploit this by crafting a malicious Matroska or WebM file and tricking a user into opening it, potentially leaking a small amount of adjacent heap memory.

🎖@cveNotify

🚨 CVE-2026-15444
The Tutor LMS – eLearning and online course solution plugin for WordPress is vulnerable to generic SQL Injection via the 'coupon_code' parameter in all versions up to, and including, 4.0.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

🎖@cveNotify

🚨 CVE-2026-59878
Improper Input Validation vulnerability in Apache ActiveMQ AMQP, Apache ActiveMQ, Apache ActiveMQ All.

A remote unauthenticated peer that can reach an exposed AMQP NIO connector can trigger denial-of-service behavior by sending a frame size value. This cause the NIO threads to die and if done rapidly enough can lead to exhaustion of the NIO thread pool denying service to other connections.
This issue affects Apache ActiveMQ AMQP: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ All: before 5.19.9, from 6.0.0 before 6.2.8.

Users are recommended to upgrade to version 5.19.9, 6.2.8, or 6.3.0 which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-61487
Improper Authorization vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ All, Apache ActiveMQ.

An authenticated low-privilege user can bypass a per-destination
write ACL by sending to an ActiveMQ temporary composite destination whose physical name is a
comma-separated composite of real queues. This allows publishing messages to any of the destinations in the list without proper write ACL permissions because the authorization check is bypassed due to the composite destination being marked as temporary.
This issue affects Apache ActiveMQ Broker: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ All: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ: before 5.19.9, from 6.0.0 before 6.2.8.

Users are recommended to upgrade to version 5.19.9, 6.2.8 or 6.3.0, which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-66921
Pivotick’s Markdown node-reference renderer failed to HTML-escape the attacker-controlled nodeName value before interpolating it into both the data-node-name attribute and the body of a generated <span> element.

Because the node-reference tokenizer rejected only square brackets, a crafted node name could still contain quotation marks, angle brackets, or other HTML metacharacters. An attacker could therefore terminate the quoted attribute or inject additional HTML elements and event-handler attributes.

When malicious node-reference content is rendered by a consumer that does not apply DOMPurify or equivalent sanitization, arbitrary JavaScript may execute in the victim’s browser in the security context of the application. Successful exploitation requires a victim to open or render a crafted graph or note and could allow the attacker to access same-origin information, modify displayed content, or perform actions using the victim’s session.

The patch resolves the issue by applying context-appropriate HTML escaping to node names before inserting them into either HTML text or quoted attribute values. The shared escaping function now encodes ampersands, angle brackets, and both types of quotation marks.

🎖@cveNotify

🚨 CVE-2026-66922
Pivotick used plain JavaScript objects as lookup tables indexed by caller-controlled graph node identifiers in its tree-layout and cycle-detection components.

Node identifiers matching properties inherited from Object.prototype, such as constructor, toString, or __proto__, were not handled as ordinary identifiers. These values could be interpreted as existing inherited properties, resolve to values of an unexpected type, or—in the case of __proto__ assignments—modify the prototype of an internal lookup object.

An attacker who can supply graph data containing crafted node identifiers could consequently cause nodes or edges to be silently omitted, produce incorrect hierarchy levels, bypass or corrupt cycle-detection results, or trigger an exception that interrupts graph processing and rendering. This affects the integrity of graph visualisations and analytics and may cause a client-side denial-of-service condition.

The affected code also failed to safely handle edges whose source node was absent from the supplied node set. Furthermore, calculating the maximum tree depth by spreading all level values into Math.max() could exceed the JavaScript function-argument limit when processing a sufficiently large graph, resulting in an exception and denial of service.

The patch replaces identifier-keyed plain objects with Map instances, ignores invalid edges during tree construction, and calculates the maximum depth iteratively.

🎖@cveNotify

🚨 CVE-2026-67173
Pivotick did not validate the URL scheme of node imagePath values derived from graph data before assigning them to SVG image resources. An attacker able to supply crafted graph data could set an image path to a malicious URI.

When a victim rendered the affected graph, the browser could resolve the attacker-controlled URI and initiate an unintended request or invoke scheme-specific handling in the victim’s context. Depending on the URI, browser behaviour, and installed protocol handlers, exploitation could disclose limited client or network metadata, facilitate rendering-based tracking, or attempt to access local or internal resources.

Exploitation requires a victim to load or render graph data containing the malicious imagePath. The patch normalizes ASCII whitespace and control characters in URI schemes and restricts image paths to relative URLs or the http, https, data, and blob schemes.

🎖@cveNotify

🚨 CVE-2026-51251
Schreibfaul1 ESP32-audioI2S 3.4.5 has a buffer overflow vulnerability in the MP3Decoder::decode() function of the MP3 decoder due to missing size validation on untrusted mainDataBegin and nSlots values.

🎖@cveNotify

🚨 CVE-2026-51252
schreibfaul1 ESP32-audioI2S 3.4.5 has a buffer overflow vulnerability in the MP3Decoder::UnpackSFMPEG1 function due to missing input validation on attacker-controlled MP3 metadata.

🎖@cveNotify

🚨 CVE-2026-51254
schreibfaul1 ESP32-audioI2S v3.4.5 has an integer underflow vulnerability in the MP3Decoder::GetBits() function of the MP3 decoder due to unchecked bit reading operations. The lack of validation on the nBits parameter causes the cachedBits counter to underflow to negative values, leading to invalid bit manipulation, incorrect bitstream parsing, application crash, or arbitrary code execution via a specially crafted MP3 file.

🎖@cveNotify

🚨 CVE-2026-51259
Unchecked unsigned integer overflow in buffer size calculation in schreibfaul1 ESP32-audioI2S 3.4.5 leads to undersized PSRAM buffer allocation. Subsequent normal audio buffer read and write operations cause heap out-of-bounds access, memory corruption, denial of service, and potential code execution.

🎖@cveNotify

🚨 CVE-2026-51260
Unsafe fixed-size memcpy operation in AudioBuffer::writeSpace() of schreibfaul1 ESP32-audioI2S 3.4.5 allows remote heap buffer overflow. The code copies a full UINT16_MAX bytes without validating destination available space, causing out-of-bounds memory write.

🎖@cveNotify

🚨 CVE-2026-51261
Missing mutex synchronization in AudioBuffer::freeSpace() in schreibfaul1 ESP32-audioI2S 3.4.5 creates a race condition between concurrent tasks. The function calculates available buffer space without protecting shared read/write pointers, returning an incorrectly large value. Trusting this value leads to heap out-of-bounds write, memory corruption, device crash, and arbitrary code execution.

🎖@cveNotify

🚨 CVE-2026-63727
Anchore Enterprise versions from 5.11.0 to 5.27.1 and 6.0.0 contain an improper privilege escalation vulnerability in the user management API. An authenticated attacker who is able to access the Anchore Enterprise API could issue an API call capable of modifying user permissions to gain access to additional resources and operations. It is not possible to grant the system-admin role, but a read only user could be granted write access. This issue is fixed in Anchore Enterprise 5.27.2 and 6.0.1.

🎖@cveNotify

🚨 CVE-2026-66299
Uncontrolled Resource Consumption vulnerability in Apache Tomcat's WebSocket chat example.

This issue affects Apache Tomcat: from 11.0.0-M20 through 11.0.24, from 10.1.24 through 10.1.57, from 9.0.89 through 9.0.120. Users who have followed the security guidance to remove the examples web application are not affected by this issue.

Users are recommended to remove the examples web application or to upgrade to version 11.0.25, 10.1.58 or 9.0.121 (when released), which fix the issue.

🎖@cveNotify

🚨 CVE-2026-66713
Deserialization of Untrusted Data (CWE-502) in the Tribes-based clustering component

 in Apache Software Foundation Apache Axis2/Java through 2.0.0 on Apache Tomcat

 (only when Tribes clustering is enabled, which is off by default) allows an

 unauthenticated remote attacker with network access to the clustering port to

 execute arbitrary code via a crafted serialized Java object delivered to the cluster

 channel and deserialized in

 org.apache.axis2.clustering.tribes.Axis2ChannelListener#messageReceived. Users are

 recommended to upgrade to version 2.0.1, which fixes this issue by removing the

 clustering feature entirely.

🎖@cveNotify

🚨 CVE-2026-67174
Pivotick contains a DOM-based cross-site scripting vulnerability in its generic UI element resolution and icon-rendering utilities.

The tryResolveHTMLElement function treated any resolved string as HTML markup by assigning it to a <template> element through innerHTML. Strings derived from untrusted graph properties or custom rendering callbacks could therefore introduce arbitrary HTML or SVG elements into the live document. The vulnerable function was used by multiple UI components, including headers, property panels, extra panels, and tooltips.

Additionally, createIcon inserted caller-supplied svgIcon markup into a template without sanitization. An application integrating Pivotick and deriving icon markup from untrusted data could therefore expose a second script-execution path.

An unauthenticated attacker able to provide a crafted graph, property value, rendering result, or SVG icon could execute JavaScript in another user's browser when the affected content is displayed or interacted with. Successful exploitation could allow the attacker to access information available to the victim, manipulate graph data or application state, and perform actions with the victim's privileges.

The patch changes string rendering to use textContent, requiring callers to explicitly return an Element when HTML rendering is intended. It also sanitizes SVG icon markup before inserting it into the DOM.

🎖@cveNotify

🚨 CVE-2026-67178
MISP installation scripts generated an Apache HTTP virtual-host configuration containing an incorrectly formatted HTTP-to-HTTPS redirect:

Redirect permanent / https://misp.example

Apache’s Redirect directive appends any portion of the requested path that follows the matched prefix to the configured destination URL. Because the destination did not end with /, attacker-controlled path content was appended directly to the hostname rather than to its URL path.

For example, a request resembling:

http://misp.example/@attacker.example/

could result in a redirect resembling:

https://misp.example@attacker.example/

Under standard URL parsing, misp.example is interpreted as user information and attacker.example as the destination host. An unauthenticated remote attacker could therefore construct a URL hosted under the legitimate MISP domain that redirects users to an attacker-controlled website.

The vulnerability could be used for phishing, credential collection, or potentially disclosing sensitive query-string information preserved during the redirect. Exploitation requires a user to follow the crafted HTTP URL.

The fix adds the missing trailing slash to the redirect destination, ensuring that appended request data remains part of the path on the configured MISP host.



Existing installationsExisting MISP installations should review their Apache HTTP virtual-host configuration and ensure that the HTTPS redirect destination ends with a trailing slash:

Redirect permanent / https://misp.example/

After updating the configuration, validate it with apachectl configtest and reload or restart Apache for the change to take effect

🎖@cveNotify

🚨 CVE-2026-6879
`Element.findall()` and fully-consumed `Element.iterfind()` exhibit `O(n^2)` time complexity when using XPath index predicates (e.g. `[1]`, `[last()]`, `[last()-N]`) on XML documents with many same-tag siblings. `Element.find()` is only affected when the first match is near the end  of the sibling list, such as with `[last()]` or `[last()-N]`;  `.//item[1]` short-circuits after the first match.

🎖@cveNotify

🚨 CVE-2026-8164
Uncontrolled Search Path Element vulnerability in ArkSigner Software and Hardware Industry and Trade Inc. ArkSigner Desktop Client allows Search Order Hijacking.

This issue affects ArkSigner Desktop Client: from v2.2.16.10 through 17062026.

🎖@cveNotify

🚨 CVE-2026-5433
Honeywell Control
Network Module (CNM) contains command injection vulnerability
in the web interface. An attacker could exploit this vulnerability via command
delimiters, potentially resulting in Remote Code Execution (RCE). 



Honeywell
recommends updating to the most recent version of this product, service or
offering [200.1]. The CNM versions affected are from [100.1, 101.1, 110.1, and 110.2].

🎖@cveNotify