🚨 CVE-2026-62434
A guest started with Populated on Demand enabled (PoD) can attempt to
reclaim pages which aren't regular guest RAM. This can cause corruption
of memory management state in Xen.
🎖@cveNotify
A guest started with Populated on Demand enabled (PoD) can attempt to
reclaim pages which aren't regular guest RAM. This can cause corruption
of memory management state in Xen.
🎖@cveNotify
🚨 CVE-2026-59878
Improper Input Validation vulnerability in Apache ActiveMQ AMQP, Apache ActiveMQ, Apache ActiveMQ All.
A remote unauthenticated peer that can reach an exposed AMQP NIO connector can trigger denial-of-service behavior by sending a frame size value. This cause the NIO threads to die and if done rapidly enough can lead to exhaustion of the NIO thread pool denying service to other connections.
This issue affects Apache ActiveMQ AMQP: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ All: before 5.19.9, from 6.0.0 before 6.2.8.
Users are recommended to upgrade to version 5.19.9, 6.2.8, or 6.3.0 which fixes the issue.
🎖@cveNotify
Improper Input Validation vulnerability in Apache ActiveMQ AMQP, Apache ActiveMQ, Apache ActiveMQ All.
A remote unauthenticated peer that can reach an exposed AMQP NIO connector can trigger denial-of-service behavior by sending a frame size value. This cause the NIO threads to die and if done rapidly enough can lead to exhaustion of the NIO thread pool denying service to other connections.
This issue affects Apache ActiveMQ AMQP: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ All: before 5.19.9, from 6.0.0 before 6.2.8.
Users are recommended to upgrade to version 5.19.9, 6.2.8, or 6.3.0 which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-61487
Improper Authorization vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ All, Apache ActiveMQ.
An authenticated low-privilege user can bypass a per-destination
write ACL by sending to an ActiveMQ temporary composite destination whose physical name is a
comma-separated composite of real queues. This allows publishing messages to any of the destinations in the list without proper write ACL permissions because the authorization check is bypassed due to the composite destination being marked as temporary.
This issue affects Apache ActiveMQ Broker: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ All: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ: before 5.19.9, from 6.0.0 before 6.2.8.
Users are recommended to upgrade to version 5.19.9, 6.2.8 or 6.3.0, which fixes the issue.
🎖@cveNotify
Improper Authorization vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ All, Apache ActiveMQ.
An authenticated low-privilege user can bypass a per-destination
write ACL by sending to an ActiveMQ temporary composite destination whose physical name is a
comma-separated composite of real queues. This allows publishing messages to any of the destinations in the list without proper write ACL permissions because the authorization check is bypassed due to the composite destination being marked as temporary.
This issue affects Apache ActiveMQ Broker: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ All: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ: before 5.19.9, from 6.0.0 before 6.2.8.
Users are recommended to upgrade to version 5.19.9, 6.2.8 or 6.3.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-66922
Pivotick used plain JavaScript objects as lookup tables indexed by caller-controlled graph node identifiers in its tree-layout and cycle-detection components.
Node identifiers matching properties inherited from Object.prototype, such as constructor, toString, or __proto__, were not handled as ordinary identifiers. These values could be interpreted as existing inherited properties, resolve to values of an unexpected type, or—in the case of __proto__ assignments—modify the prototype of an internal lookup object.
An attacker who can supply graph data containing crafted node identifiers could consequently cause nodes or edges to be silently omitted, produce incorrect hierarchy levels, bypass or corrupt cycle-detection results, or trigger an exception that interrupts graph processing and rendering. This affects the integrity of graph visualisations and analytics and may cause a client-side denial-of-service condition.
The affected code also failed to safely handle edges whose source node was absent from the supplied node set. Furthermore, calculating the maximum tree depth by spreading all level values into Math.max() could exceed the JavaScript function-argument limit when processing a sufficiently large graph, resulting in an exception and denial of service.
The patch replaces identifier-keyed plain objects with Map instances, ignores invalid edges during tree construction, and calculates the maximum depth iteratively.
🎖@cveNotify
Pivotick used plain JavaScript objects as lookup tables indexed by caller-controlled graph node identifiers in its tree-layout and cycle-detection components.
Node identifiers matching properties inherited from Object.prototype, such as constructor, toString, or __proto__, were not handled as ordinary identifiers. These values could be interpreted as existing inherited properties, resolve to values of an unexpected type, or—in the case of __proto__ assignments—modify the prototype of an internal lookup object.
An attacker who can supply graph data containing crafted node identifiers could consequently cause nodes or edges to be silently omitted, produce incorrect hierarchy levels, bypass or corrupt cycle-detection results, or trigger an exception that interrupts graph processing and rendering. This affects the integrity of graph visualisations and analytics and may cause a client-side denial-of-service condition.
The affected code also failed to safely handle edges whose source node was absent from the supplied node set. Furthermore, calculating the maximum tree depth by spreading all level values into Math.max() could exceed the JavaScript function-argument limit when processing a sufficiently large graph, resulting in an exception and denial of service.
The patch replaces identifier-keyed plain objects with Map instances, ignores invalid edges during tree construction, and calculates the maximum depth iteratively.
🎖@cveNotify
GitHub
fix: [security] key node-id lookups by Map in the tree layout and cyc… · Pivotick/Pivotick@4e12922
…le check
Plain objects keyed by node id read prototype members as real entries, so a node
called __proto__ or constructor was silently dropped from the layout or resolved
to an inherited function...
Plain objects keyed by node id read prototype members as real entries, so a node
called __proto__ or constructor was silently dropped from the layout or resolved
to an inherited function...
🚨 CVE-2026-67173
Pivotick did not validate the URL scheme of node imagePath values derived from graph data before assigning them to SVG image resources. An attacker able to supply crafted graph data could set an image path to a malicious URI.
When a victim rendered the affected graph, the browser could resolve the attacker-controlled URI and initiate an unintended request or invoke scheme-specific handling in the victim’s context. Depending on the URI, browser behaviour, and installed protocol handlers, exploitation could disclose limited client or network metadata, facilitate rendering-based tracking, or attempt to access local or internal resources.
Exploitation requires a victim to load or render graph data containing the malicious imagePath. The patch normalizes ASCII whitespace and control characters in URI schemes and restricts image paths to relative URLs or the http, https, data, and blob schemes.
🎖@cveNotify
Pivotick did not validate the URL scheme of node imagePath values derived from graph data before assigning them to SVG image resources. An attacker able to supply crafted graph data could set an image path to a malicious URI.
When a victim rendered the affected graph, the browser could resolve the attacker-controlled URI and initiate an unintended request or invoke scheme-specific handling in the victim’s context. Depending on the URI, browser behaviour, and installed protocol handlers, exploitation could disclose limited client or network metadata, facilitate rendering-based tracking, or attempt to access local or internal resources.
Exploitation requires a victim to load or render graph data containing the malicious imagePath. The patch normalizes ASCII whitespace and control characters in URI schemes and restricts image paths to relative URLs or the http, https, data, and blob schemes.
🎖@cveNotify
GitHub
fix: [security] allowlist URL schemes for node image paths · Pivotick/Pivotick@2a6ad28
imagePath can come from graph data and rendering it fetches the URL, so a
hostile value turned a render into an outbound request. Reuses one scheme
checker for images and property links.
- As repo...
hostile value turned a render into an outbound request. Reuses one scheme
checker for images and property links.
- As repo...
🚨 CVE-2020-3973
The VeloCloud Orchestrator does not apply correct input validation which allows for blind SQL-injection. A malicious actor with tenant access to Velocloud Orchestrator could enter specially crafted SQL queries and obtain data to which they are not privileged.
🎖@cveNotify
The VeloCloud Orchestrator does not apply correct input validation which allows for blind SQL-injection. A malicious actor with tenant access to Velocloud Orchestrator could enter specially crafted SQL queries and obtain data to which they are not privileged.
🎖@cveNotify
🚨 CVE-2026-31431
In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly.
🎖@cveNotify
🚨 CVE-2026-55626
xrdp is an open source RDP server. In versions 0.10.6 and prior, when an authenticated user session is initialized using the Xvnc backend over UNIX domain sockets, the Xvnc process is launched with insufficient authentication mechanisms. A local authenticated attacker could exploit this vulnerability to bypass intended session isolation, allowing them to unauthorizedly view or control the active desktop sessions of other users on the same system. Users using other backends, such as xorgxrdp or Xvnc over TCP sockets, are not affected. This issue has been fixed in version 0.10.6.1.
🎖@cveNotify
xrdp is an open source RDP server. In versions 0.10.6 and prior, when an authenticated user session is initialized using the Xvnc backend over UNIX domain sockets, the Xvnc process is launched with insufficient authentication mechanisms. A local authenticated attacker could exploit this vulnerability to bypass intended session isolation, allowing them to unauthorizedly view or control the active desktop sessions of other users on the same system. Users using other backends, such as xorgxrdp or Xvnc over TCP sockets, are not affected. This issue has been fixed in version 0.10.6.1.
🎖@cveNotify
GitHub
Release xrdp v0.10.6.1 · neutrinolabs/xrdp
Release notes for xrdp v0.10.6.1 (2026/07/06)
General announcements
This release fixes 10 vulnerabilities and 1 regression introduced by a vulnerability fix in the previous release.
If you like xrd...
General announcements
This release fixes 10 vulnerabilities and 1 regression introduced by a vulnerability fix in the previous release.
If you like xrd...
🚨 CVE-2026-16812
VeloCloud Orchestrator (VCO) on-prem has a security issue where this issue may allow a remote attacker to access privileged internal functionality and impact the VCO host. Successful exploitation may compromise the confidentiality, integrity, and availability of the orchestrator and data managed by the orchestrator.
This functionality was intended to be for internal use only and is not intended to be remotely accessible.
Hosted and Dedicated versions of VCO have already been patched in advance of this notice going out.
This issue was discovered externally and is known to be actively exploited.
🎖@cveNotify
VeloCloud Orchestrator (VCO) on-prem has a security issue where this issue may allow a remote attacker to access privileged internal functionality and impact the VCO host. Successful exploitation may compromise the confidentiality, integrity, and availability of the orchestrator and data managed by the orchestrator.
This functionality was intended to be for internal use only and is not intended to be remotely accessible.
Hosted and Dedicated versions of VCO have already been patched in advance of this notice going out.
This issue was discovered externally and is known to be actively exploited.
🎖@cveNotify
Arista Networks
Security Advisory 0144 - Arista
July 27, 2026 VeloCloud Orchestrator (VCO) on-prem has a security issue where this issue may allow a remote attacker to access privileged internal functionality and impact the VCO host. Successful exploitation may compromise the confidentiality,
🚨 CVE-2026-49779
Path Traversal: '.../...//' vulnerability in Addify Tax Exempt for WooCommerce allows Path Traversal.
This issue affects Tax Exempt for WooCommerce: from n/a before 1.9.5.
🎖@cveNotify
Path Traversal: '.../...//' vulnerability in Addify Tax Exempt for WooCommerce allows Path Traversal.
This issue affects Tax Exempt for WooCommerce: from n/a before 1.9.5.
🎖@cveNotify
Patchstack
Path Traversal in WordPress Tax Exempt for WooCommerce Plugin
Patchstack is the leading open source vulnerability research organization. Find information and protection for all WordPress, Drupal and Joomla security issues.
🚨 CVE-2026-15631
Impact: @fastify/http-proxy versions from 9.4.0 up to and including 11.5.0 fail to validate the resolved WebSocket destination path against the configured rewrite prefix. The WebSocket routing path in WebSocketProxy.findUpstream resolves the destination via the WHATWG URL constructor, which collapses dot segments, so a crafted upgrade request with path traversal sequences can escape the rewrite prefix and reach upstream endpoints that were not meant to be exposed by the proxy. This is a variant of CVE-2021-21322 in a code path that never went through the HTTP fix in fastify/reply-from. Exploitation requires a non-normalizing WebSocket client, since browsers and the ws package normalize the request path before sending, but raw HTTP clients or downstream proxies that forward the request target unchanged make the attack reachable in production topologies.
Patches: upgrade to @fastify/http-proxy 11.6.0.
Workarounds: none.
🎖@cveNotify
Impact: @fastify/http-proxy versions from 9.4.0 up to and including 11.5.0 fail to validate the resolved WebSocket destination path against the configured rewrite prefix. The WebSocket routing path in WebSocketProxy.findUpstream resolves the destination via the WHATWG URL constructor, which collapses dot segments, so a crafted upgrade request with path traversal sequences can escape the rewrite prefix and reach upstream endpoints that were not meant to be exposed by the proxy. This is a variant of CVE-2021-21322 in a code path that never went through the HTTP fix in fastify/reply-from. Exploitation requires a non-normalizing WebSocket client, since browsers and the ws package normalize the request path before sending, but raw HTTP clients or downstream proxies that forward the request target unchanged make the attack reachable in production topologies.
Patches: upgrade to @fastify/http-proxy 11.6.0.
Workarounds: none.
🎖@cveNotify
OpenJS Foundation CVE Numbering Authority
Security Advisories
The OpenJS Foundation’s CVE Numbering Authority (CNA)
🚨 CVE-2026-16117
Impact: @fastify/http-proxy versions up to and including 11.5.0 fail to rewrite the request prefix when the prefix segment is URL-encoded. Fastify's router URL-decodes paths for route matching, but request.url retains the original encoded form, and the prefix-rewrite step uses a literal string replace against the decoded prefix. A request that encodes one or more characters of the configured prefix therefore matches the route but skips the rewrite, so the raw encoded path is forwarded to the upstream unchanged. The upstream then decodes the path and serves it, letting an attacker reach upstream paths that the proxy was configured to hide via rewritePrefix, including internal or administrative endpoints.
Patches: upgrade to @fastify/http-proxy 11.6.0.
Workarounds: none.
🎖@cveNotify
Impact: @fastify/http-proxy versions up to and including 11.5.0 fail to rewrite the request prefix when the prefix segment is URL-encoded. Fastify's router URL-decodes paths for route matching, but request.url retains the original encoded form, and the prefix-rewrite step uses a literal string replace against the decoded prefix. A request that encodes one or more characters of the configured prefix therefore matches the route but skips the rewrite, so the raw encoded path is forwarded to the upstream unchanged. The upstream then decodes the path and serves it, letting an attacker reach upstream paths that the proxy was configured to hide via rewritePrefix, including internal or administrative endpoints.
Patches: upgrade to @fastify/http-proxy 11.6.0.
Workarounds: none.
🎖@cveNotify
OpenJS Foundation CVE Numbering Authority
Security Advisories
The OpenJS Foundation’s CVE Numbering Authority (CNA)
🚨 CVE-2026-64620
FreeRDP before 3.28.0 (affected <=3.27.1) contains a heap-based buffer overflow in crypto_rsa_common() (libfreerdp/crypto/crypto.c). The function writes the modular-exponentiation result into the caller's output buffer via BN_bn2bin() and only afterward checks output_length > out_length, so out-of-bounds bytes are written before the bounds check. On the server side, when a client selects RDP Standard Security, the encrypted client random is decrypted into a fixed 32-byte buffer. Because the server publishes its RSA public key, an unauthenticated attacker can forge a ciphertext whose decrypted value is up to the full modulus length (e.g. 256 bytes for RSA-2048), overflowing the 32-byte heap buffer by up to ~224 attacker-controlled bytes pre-authentication, resulting in denial of service.
🎖@cveNotify
FreeRDP before 3.28.0 (affected <=3.27.1) contains a heap-based buffer overflow in crypto_rsa_common() (libfreerdp/crypto/crypto.c). The function writes the modular-exponentiation result into the caller's output buffer via BN_bn2bin() and only afterward checks output_length > out_length, so out-of-bounds bytes are written before the bounds check. On the server side, when a client selects RDP Standard Security, the encrypted client random is decrypted into a fixed 32-byte buffer. Because the server publishes its RSA public key, an unauthenticated attacker can forge a ciphertext whose decrypted value is up to the full modulus length (e.g. 256 bytes for RSA-2048), overflowing the 32-byte heap buffer by up to ~224 attacker-controlled bytes pre-authentication, resulting in denial of service.
🎖@cveNotify
GitHub
Merge pull request #12992 from akallabeth/android-unify-build · FreeRDP/FreeRDP@1f7a716
[client,android] move external deps to own CMake file
🚨 CVE-2026-64621
FreeRDP before 3.28.0 (affected 3.x through 3.27.1) contains a double-free vulnerability in freerdp_client_rdp_file_apply_to_settings() (client/common/file.c) when parsing the selectedmonitors field of a .rdp connection file. The MonitorIds array is allocated through the settings object, and a raw non-owning pointer to it is freed on the strtoul error path without clearing settings->MonitorIds, leaving it dangling; at teardown freerdp_settings_free() frees the same buffer again. An attacker who convinces a victim to open a crafted .rdp file with oversized monitor tokens can trigger a size-controlled double-free in any FreeRDP CLI client (xfreerdp/sdl-freerdp/wlfreerdp) in the default configuration.
🎖@cveNotify
FreeRDP before 3.28.0 (affected 3.x through 3.27.1) contains a double-free vulnerability in freerdp_client_rdp_file_apply_to_settings() (client/common/file.c) when parsing the selectedmonitors field of a .rdp connection file. The MonitorIds array is allocated through the settings object, and a raw non-owning pointer to it is freed on the strtoul error path without clearing settings->MonitorIds, leaving it dangling; at teardown freerdp_settings_free() frees the same buffer again. An attacker who convinces a victim to open a crafted .rdp file with oversized monitor tokens can trigger a size-controlled double-free in any FreeRDP CLI client (xfreerdp/sdl-freerdp/wlfreerdp) in the default configuration.
🎖@cveNotify
GitHub
Merge pull request #12992 from akallabeth/android-unify-build · FreeRDP/FreeRDP@1f7a716
[client,android] move external deps to own CMake file
🚨 CVE-2026-45709
Mailpit is an email testing tool and API for developers. The fix for GHSA-6jxm-fv7w-rw5j (CVE-2026-23845, "Server-Side Request Forgery (SSRF) via HTML Check API"), shipped in mailpit `v1.28.3`, hardened `internal/htmlcheck/css.go::downloadCSSToBytes` with a 5MB size cap, a `text/css` content-type check, login-info stripping in `isValidURL`, and an opt-in `--block-remote-css-and-fonts` config flag — but did not add the IP-filtering dialer that the same codebase already uses on the two sister SSRF endpoints (the proxy handler and link-check). Prior to version 1.30.0, `internal/htmlcheck/css.go::newSafeHTTPClient` is mis-named — it builds an `http.Client` whose `Transport.DialContext` calls `net.Dialer.DialContext` directly with no IP allowlisting. As a result, the SSRF originally reported by Bao Anh Phan still permits the server to dial loopback, private, link-local, and any other reserved/multicast range, provided the target replies with `HTTP/200` and a content-type beginning with `text/css`. With redirect-following (`CheckRedirect` allows redirects to any `isValidURL` URL with no IP filter), an attacker-controlled public site can redirect mailpit's request into the private network without ever appearing in the email's HTML. In the default mailpit deploy (no UI auth, no SMTP auth, port 1025/8025 exposed), this is an unauthenticated, network-reachable SSRF triggered by sending an HTML email and then issuing one HTTP `GET` to `/api/v1/message/{id}/html-check`. Version 1.30.0 contains an updated fix.
🎖@cveNotify
Mailpit is an email testing tool and API for developers. The fix for GHSA-6jxm-fv7w-rw5j (CVE-2026-23845, "Server-Side Request Forgery (SSRF) via HTML Check API"), shipped in mailpit `v1.28.3`, hardened `internal/htmlcheck/css.go::downloadCSSToBytes` with a 5MB size cap, a `text/css` content-type check, login-info stripping in `isValidURL`, and an opt-in `--block-remote-css-and-fonts` config flag — but did not add the IP-filtering dialer that the same codebase already uses on the two sister SSRF endpoints (the proxy handler and link-check). Prior to version 1.30.0, `internal/htmlcheck/css.go::newSafeHTTPClient` is mis-named — it builds an `http.Client` whose `Transport.DialContext` calls `net.Dialer.DialContext` directly with no IP allowlisting. As a result, the SSRF originally reported by Bao Anh Phan still permits the server to dial loopback, private, link-local, and any other reserved/multicast range, provided the target replies with `HTTP/200` and a content-type beginning with `text/css`. With redirect-following (`CheckRedirect` allows redirects to any `isValidURL` URL with no IP filter), an attacker-controlled public site can redirect mailpit's request into the private network without ever appearing in the email's HTML. In the default mailpit deploy (no UI auth, no SMTP auth, port 1025/8025 exposed), this is an unauthenticated, network-reachable SSRF triggered by sending an HTML email and then issuing one HTTP `GET` to `/api/v1/message/{id}/html-check`. Version 1.30.0 contains an updated fix.
🎖@cveNotify
GitHub
Release v1.30.0 · axllent/mailpit
This release includes an important security fixes, so upgrading is strongly recommended.
This release introduces a default message size limit for both SMTP and api/v1/send to prevent DoS attacks vi...
This release introduces a default message size limit for both SMTP and api/v1/send to prevent DoS attacks vi...
🚨 CVE-2026-45711
Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the mailpit dump --http <base-url> <out-dir> sub-command downloads every message from a remote Mailpit instance and writes each one as <id>.eml inside the user-supplied output directory. The message ID field is taken verbatim from the JSON response of the remote server and concatenated into the output path with path.Join, which silently normalizes `..` segments. A malicious HTTP server impersonating Mailpit can therefore make mailpit dump write attacker-controlled bytes to any path the running user can write, fully outside the intended output directory. Version 1.30.0 contains a patch.
🎖@cveNotify
Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the mailpit dump --http <base-url> <out-dir> sub-command downloads every message from a remote Mailpit instance and writes each one as <id>.eml inside the user-supplied output directory. The message ID field is taken verbatim from the JSON response of the remote server and concatenated into the output path with path.Join, which silently normalizes `..` segments. A malicious HTTP server impersonating Mailpit can therefore make mailpit dump write attacker-controlled bytes to any path the running user can write, fully outside the intended output directory. Version 1.30.0 contains a patch.
🎖@cveNotify
GitHub
Release v1.30.0 · axllent/mailpit
This release includes an important security fixes, so upgrading is strongly recommended.
This release introduces a default message size limit for both SMTP and api/v1/send to prevent DoS attacks vi...
This release introduces a default message size limit for both SMTP and api/v1/send to prevent DoS attacks vi...
🚨 CVE-2026-45712
Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the screenshot/print proxy (/proxy?data=…) maintains a package-level assets map[string]MessageAssets cache, but reads the map without holding assetsMutex while a long-running cleanup goroutine and (re-entrant) CSS-rewriting code path concurrently write to it under the lock. When the unsynchronized read coincides with a synchronized write, Go's runtime raises fatal error: concurrent map read and map write — a runtime.throw that is not recoverable by http.Server's handler-panic recover. The whole Mailpit process exits, taking the SMTP, POP3 and HTTP listeners down with it. Version 1.30.0 contains a patch.
🎖@cveNotify
Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the screenshot/print proxy (/proxy?data=…) maintains a package-level assets map[string]MessageAssets cache, but reads the map without holding assetsMutex while a long-running cleanup goroutine and (re-entrant) CSS-rewriting code path concurrently write to it under the lock. When the unsynchronized read coincides with a synchronized write, Go's runtime raises fatal error: concurrent map read and map write — a runtime.throw that is not recoverable by http.Server's handler-panic recover. The whole Mailpit process exits, taking the SMTP, POP3 and HTTP listeners down with it. Version 1.30.0 contains a patch.
🎖@cveNotify
GitHub
Release v1.30.0 · axllent/mailpit
This release includes an important security fixes, so upgrading is strongly recommended.
This release introduces a default message size limit for both SMTP and api/v1/send to prevent DoS attacks vi...
This release introduces a default message size limit for both SMTP and api/v1/send to prevent DoS attacks vi...
🚨 CVE-2026-45713
Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the Mailpit SMTP server has a Server.MaxSize int field that controls the maximum allowed DATA payload size, but the field is never assigned anywhere outside test code, leaving it at Go's zero value (0 ⇒ "no limit"). The same applies to the HTTP /api/v1/send endpoint, whose request body is decoded with json.NewDecoder(r.Body) and no http.MaxBytesReader. Because Mailpit's default listeners bind [::]:1025 (SMTP) and [::]:8025 (HTTP), with no authentication required on either, a single network-reachable attacker can push an arbitrarily large message into Mailpit and watch RAM consumption spike with a ~7-10× amplification factor (raw frame → enmime envelope tree → search-text index → zstd-encoded write to SQLite). Repeating the attack — or running it concurrently from multiple connections — drives the process to OOM-kill. Version 1.30.0 contains a patch.
🎖@cveNotify
Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the Mailpit SMTP server has a Server.MaxSize int field that controls the maximum allowed DATA payload size, but the field is never assigned anywhere outside test code, leaving it at Go's zero value (0 ⇒ "no limit"). The same applies to the HTTP /api/v1/send endpoint, whose request body is decoded with json.NewDecoder(r.Body) and no http.MaxBytesReader. Because Mailpit's default listeners bind [::]:1025 (SMTP) and [::]:8025 (HTTP), with no authentication required on either, a single network-reachable attacker can push an arbitrarily large message into Mailpit and watch RAM consumption spike with a ~7-10× amplification factor (raw frame → enmime envelope tree → search-text index → zstd-encoded write to SQLite). Repeating the attack — or running it concurrently from multiple connections — drives the process to OOM-kill. Version 1.30.0 contains a patch.
🎖@cveNotify
GitHub
Release v1.30.0 · axllent/mailpit
This release includes an important security fixes, so upgrading is strongly recommended.
This release introduces a default message size limit for both SMTP and api/v1/send to prevent DoS attacks vi...
This release introduces a default message size limit for both SMTP and api/v1/send to prevent DoS attacks vi...
🚨 CVE-2026-48824
Mailpit is an email testing tool and API for developers. Prior to version 1.30.1, the fix for GHSA-fpxj-m5q8-fphw (CVE-2026-45710, "Mailpit: Set a default 50MB p/m limit to prevent DoS via unlimited SMTP DATA and /api/v1/send body sizes") wrapped only `POST /api/v1/send` with `http.MaxBytesReader`. The four other Mailpit JSON-body API endpoints `PUT /api/v1/messages` (SetReadStatus), `DELETE /api/v1/messages` (DeleteMessages), `PUT /api/v1/tags` (SetMessageTags), and `POST /api/v1/message/{id}/release` (ReleaseMessage) still call `json.NewDecoder(r.Body)` directly with no body-size cap and remain reachable unauthenticated in the default `docker run axllent/mailpit:latest` deploy. An unauthenticated remote attacker can post a multi-million-element `IDs` slice and drive RSS from ~25 MiB baseline to ~450 MiB per 16 MB request body. Repeating across multiple connections accumulates the same per-request amplification per process. Version 1.30.1 contains a patch.
🎖@cveNotify
Mailpit is an email testing tool and API for developers. Prior to version 1.30.1, the fix for GHSA-fpxj-m5q8-fphw (CVE-2026-45710, "Mailpit: Set a default 50MB p/m limit to prevent DoS via unlimited SMTP DATA and /api/v1/send body sizes") wrapped only `POST /api/v1/send` with `http.MaxBytesReader`. The four other Mailpit JSON-body API endpoints `PUT /api/v1/messages` (SetReadStatus), `DELETE /api/v1/messages` (DeleteMessages), `PUT /api/v1/tags` (SetMessageTags), and `POST /api/v1/message/{id}/release` (ReleaseMessage) still call `json.NewDecoder(r.Body)` directly with no body-size cap and remain reachable unauthenticated in the default `docker run axllent/mailpit:latest` deploy. An unauthenticated remote attacker can post a multi-million-element `IDs` slice and drive RSS from ~25 MiB baseline to ~450 MiB per 16 MB request body. Repeating across multiple connections accumulates the same per-request amplification per process. Version 1.30.1 contains a patch.
🎖@cveNotify
GitHub
Release v1.30.1 · axllent/mailpit
Security
Extend request body size cap to all JSON API endpoints (GHSA-28pq-6qxg-wg5r)
Pin Github Actions workflow versions using full commit SHA
Do not use npm cache to prevent cache poisoning
Dis...
Extend request body size cap to all JSON API endpoints (GHSA-28pq-6qxg-wg5r)
Pin Github Actions workflow versions using full commit SHA
Do not use npm cache to prevent cache poisoning
Dis...
🚨 CVE-2026-16615
A flaw was found in librest. The PKCE implementation for OAuth authorization uses the GRand function from the GLib API, a cryptographically insecure pseudo-random number generator. Because the generated "code verifier" lacks sufficient cryptographic entropy, a malicious actor can reverse-engineer the pseudo-random number generator (PRNG) seed to predict or reconstruct the code verifier string, allowing an attacker to bypass PKCE protections and successfully impersonate the client during the OAuth 2.0 authorization flow.
🎖@cveNotify
A flaw was found in librest. The PKCE implementation for OAuth authorization uses the GRand function from the GLib API, a cryptographically insecure pseudo-random number generator. Because the generated "code verifier" lacks sufficient cryptographic entropy, a malicious actor can reverse-engineer the pseudo-random number generator (PRNG) seed to predict or reconstruct the code verifier string, allowing an attacker to bypass PKCE protections and successfully impersonate the client during the OAuth 2.0 authorization flow.
🎖@cveNotify
🚨 CVE-2026-51296
SQLite 3.41 has a use-after-free vulnerability in jsonRemoveFunc of SQLite JSON module. The parsed JSON object is freed at line 3555, while line 3575 still calls jsonLookupStep with the released pointer. Remote attackers can exploit this flaw to crash the service and leak heap memory information.
🎖@cveNotify
SQLite 3.41 has a use-after-free vulnerability in jsonRemoveFunc of SQLite JSON module. The parsed JSON object is freed at line 3555, while line 3575 still calls jsonLookupStep with the released pointer. Remote attackers can exploit this flaw to crash the service and leak heap memory information.
🎖@cveNotify
GitHub
Create CVE-2026-51296 · programmervuln/cveadvisory-@75a435c
details to cve applications. Contribute to programmervuln/cveadvisory- development by creating an account on GitHub.