🚨 CVE-2026-64536
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in is_ap_in_tkip() IE loop
The loop in is_ap_in_tkip() iterates over IEs without verifying that
enough bytes remain before dereferencing the IE header or its payload:
- pIE->element_id and pIE->length are read without checking that
i + sizeof(*pIE) <= ie_length, so a truncated IE at the end of the
buffer causes an OOB read.
- For WLAN_EID_VENDOR_SPECIFIC the code compares pIE->data + 12,
which requires pIE->length >= 16. For WLAN_EID_RSN it compares
pIE->data + 8, requiring pIE->length >= 12. Neither requirement
is checked.
Add the missing IE header and payload bounds checks and guard each
data access with an explicit pIE->length minimum, matching the
pattern established in update_beacon_info().
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in is_ap_in_tkip() IE loop
The loop in is_ap_in_tkip() iterates over IEs without verifying that
enough bytes remain before dereferencing the IE header or its payload:
- pIE->element_id and pIE->length are read without checking that
i + sizeof(*pIE) <= ie_length, so a truncated IE at the end of the
buffer causes an OOB read.
- For WLAN_EID_VENDOR_SPECIFIC the code compares pIE->data + 12,
which requires pIE->length >= 16. For WLAN_EID_RSN it compares
pIE->data + 8, requiring pIE->length >= 12. Neither requirement
is checked.
Add the missing IE header and payload bounds checks and guard each
data access with an explicit pIE->length minimum, matching the
pattern established in update_beacon_info().
🎖@cveNotify
🚨 CVE-2026-65893
This vulnerability exists in CP PLUS EZ-P21 IP Camera due to an insecure debug feature enabled in the firmware.
An attacker with physical access could exploit this vulnerability by placing arbitrary code on removable media and triggering their execution through the debug mechanism.
Successful exploitation of this vulnerability could allow an attacker to execute arbitrary code with elevated privileges on the targeted device.
🎖@cveNotify
This vulnerability exists in CP PLUS EZ-P21 IP Camera due to an insecure debug feature enabled in the firmware.
An attacker with physical access could exploit this vulnerability by placing arbitrary code on removable media and triggering their execution through the debug mechanism.
Successful exploitation of this vulnerability could allow an attacker to execute arbitrary code with elevated privileges on the targeted device.
🎖@cveNotify
🚨 CVE-2026-65894
This vulnerability exists in CP PLUS EZ-P21 IP Camera due to improper authentication of HTTP endpoints. A remote attacker could exploit this vulnerability by conducting brute-force attacks against HTTP endpoint on the targeted device.
Successful exploitation of this vulnerability could allow an attacker to gain unauthorized access to live video snapshots from the targeted device.
🎖@cveNotify
This vulnerability exists in CP PLUS EZ-P21 IP Camera due to improper authentication of HTTP endpoints. A remote attacker could exploit this vulnerability by conducting brute-force attacks against HTTP endpoint on the targeted device.
Successful exploitation of this vulnerability could allow an attacker to gain unauthorized access to live video snapshots from the targeted device.
🎖@cveNotify
🚨 CVE-2026-16554
cJSON library is vulnerable to an integer overflow in the print_string_ptr() function in cJSON.c on 32-bit platforms. The escape_characters counter, a 32-bit size_t, can wrap around when processing strings containing approximately 858,993,460 or more control characters, causing the output buffer to be allocated based on an underestimated length. When cJSON_PrintBuffered() is used with a pre-allocated buffer, the subsequent write loop overflows the heap allocation. An attacker supplying a crafted JSON string to an application using cJSON on a 32-bit platform can cause a heap buffer overflow, potentially leading to remote code execution, information disclosure, or denial of service.
Because project creator contact attempts were unsuccessful, the vulnerability has only been confirmed in version 1.7.19 but may also affect other versions.
🎖@cveNotify
cJSON library is vulnerable to an integer overflow in the print_string_ptr() function in cJSON.c on 32-bit platforms. The escape_characters counter, a 32-bit size_t, can wrap around when processing strings containing approximately 858,993,460 or more control characters, causing the output buffer to be allocated based on an underestimated length. When cJSON_PrintBuffered() is used with a pre-allocated buffer, the subsequent write loop overflows the heap allocation. An attacker supplying a crafted JSON string to an application using cJSON on a 32-bit platform can cause a heap buffer overflow, potentially leading to remote code execution, information disclosure, or denial of service.
Because project creator contact attempts were unsuccessful, the vulnerability has only been confirmed in version 1.7.19 but may also affect other versions.
🎖@cveNotify
cert.pl
Vulnerability in DaveGamble cJSON library
Integer overflow vulnerability (CVE-2026-16554) has been found in DaveGamble cJSON library.
🚨 CVE-2026-65764
Joomla Extension - phoca.cz - Reflected XSS vulnerability in Phoca Commander 5.0.0-6.1.1 - Improper validation of user inputs lead to a reflective XSS vulnerability.
🎖@cveNotify
Joomla Extension - phoca.cz - Reflected XSS vulnerability in Phoca Commander 5.0.0-6.1.1 - Improper validation of user inputs lead to a reflective XSS vulnerability.
🎖@cveNotify
Phoca
Phoca Commander
Phoca Commander is dual panel file manager for Joomla! CMS
🚨 CVE-2026-65765
Joomla Extension - phoca.cz - Path Traversal vulnerability in Phoca Commander 1.0.0-6.1.1 - Improper limitation of paths for save and download actions lead to path traversal vulnerabilities.
🎖@cveNotify
Joomla Extension - phoca.cz - Path Traversal vulnerability in Phoca Commander 1.0.0-6.1.1 - Improper limitation of paths for save and download actions lead to path traversal vulnerabilities.
🎖@cveNotify
Phoca
Phoca Commander
Phoca Commander is dual panel file manager for Joomla! CMS
🚨 CVE-2026-50256
A stack-based buffer overflow flaw was found in the X.Org X server and Xwayland. A mismatch between the X server and the libXfont2 library's maximum font name length can cause a stack buffer overflow during font alias resolution. The server allocates a 256 byte stack buffer but libXfont2's alias target name length is 1024 bytes. A font alias name between 257 and 1023 bytes causes the X server to copy that name into the undersized stack buffer without further checks. This may be used to crash the server, or for privilege escalation if the X server runs as root.
🎖@cveNotify
A stack-based buffer overflow flaw was found in the X.Org X server and Xwayland. A mismatch between the X server and the libXfont2 library's maximum font name length can cause a stack buffer overflow during font alias resolution. The server allocates a 256 byte stack buffer but libXfont2's alias target name length is 1024 bytes. A font alias name between 257 and 1023 bytes causes the X server to copy that name into the undersized stack buffer without further checks. This may be used to crash the server, or for privilege escalation if the X server runs as root.
🎖@cveNotify
🚨 CVE-2026-50257
A use-after-free flaw was found in the X.Org X server and Xwayland in miSyncDestroyFence(). A client that sets up multiple fence triggers can trigger a use-after-free function pointer call. An attacker would connect to the X server to set up a fence and await that fence, then a second X connection destroys the fence, causing the use-after-free. This may be used to crash the server, or for privilege escalation if the X server runs as root.
🎖@cveNotify
A use-after-free flaw was found in the X.Org X server and Xwayland in miSyncDestroyFence(). A client that sets up multiple fence triggers can trigger a use-after-free function pointer call. An attacker would connect to the X server to set up a fence and await that fence, then a second X connection destroys the fence, causing the use-after-free. This may be used to crash the server, or for privilege escalation if the X server runs as root.
🎖@cveNotify
🚨 CVE-2026-50258
A stack-based buffer overflow flaw was found in the X.Org X server and Xwayland. The X server has multiple stack buffers sized XkbMaxShiftLevel * XkbNumKbdGroups but CheckKeyTypes() does not verify or clamp non-canonical key types to XkbMaxShiftLevel. A client can change key types to excessive shift levels and trigger stack overflows. This is caused by an incomplete fix of CVE-2025-26597. This may be used to crash the server, or for privilege escalation if the X server runs as root.
🎖@cveNotify
A stack-based buffer overflow flaw was found in the X.Org X server and Xwayland. The X server has multiple stack buffers sized XkbMaxShiftLevel * XkbNumKbdGroups but CheckKeyTypes() does not verify or clamp non-canonical key types to XkbMaxShiftLevel. A client can change key types to excessive shift levels and trigger stack overflows. This is caused by an incomplete fix of CVE-2025-26597. This may be used to crash the server, or for privilege escalation if the X server runs as root.
🎖@cveNotify
🚨 CVE-2026-50259
A stack-based buffer overflow flaw was found in the X.Org X server and Xwayland. _XkbSetMapChecks() declares a fixed-size stack buffer mapWidths[256] indexed by key type index. The helper function CheckKeyTypes() writes to this buffer at a client-controlled offset, allowing a stack buffer overflow. This may be used to crash the server, or for privilege escalation if the X server runs as root.
🎖@cveNotify
A stack-based buffer overflow flaw was found in the X.Org X server and Xwayland. _XkbSetMapChecks() declares a fixed-size stack buffer mapWidths[256] indexed by key type index. The helper function CheckKeyTypes() writes to this buffer at a client-controlled offset, allowing a stack buffer overflow. This may be used to crash the server, or for privilege escalation if the X server runs as root.
🎖@cveNotify
🚨 CVE-2026-50260
A use-after-free flaw was found in the X.Org X server and Xwayland in FreeCounter(). A client that sets up multiple SyncCounters and awaits on those triggers can trigger a use-after-free when destroying those counters via a second client connection. This may be used to crash the server, or for privilege escalation if the X server runs as root.
🎖@cveNotify
A use-after-free flaw was found in the X.Org X server and Xwayland in FreeCounter(). A client that sets up multiple SyncCounters and awaits on those triggers can trigger a use-after-free when destroying those counters via a second client connection. This may be used to crash the server, or for privilege escalation if the X server runs as root.
🎖@cveNotify
🚨 CVE-2026-50261
A use-after-free flaw was found in the X.Org X server and Xwayland in SyncChangeCounter(). A client that sets up multiple SyncCounters can trigger a use-after-free when destroying those counters via a second client connection while changing those counters. This may be used to crash the server, or for privilege escalation if the X server runs as root.
🎖@cveNotify
A use-after-free flaw was found in the X.Org X server and Xwayland in SyncChangeCounter(). A client that sets up multiple SyncCounters can trigger a use-after-free when destroying those counters via a second client connection while changing those counters. This may be used to crash the server, or for privilege escalation if the X server runs as root.
🎖@cveNotify
🚨 CVE-2026-50262
An out-of-bounds read flaw was found in the X.Org X server and Xwayland in __glXDisp_ChangeDrawableAttributes(). A wrong size validation check can read a client-controlled number of bytes, exceeding the request buffer, leading to information disclosure. A write path also exists but requires byte-swapped clients which is disabled by default.
🎖@cveNotify
An out-of-bounds read flaw was found in the X.Org X server and Xwayland in __glXDisp_ChangeDrawableAttributes(). A wrong size validation check can read a client-controlled number of bytes, exceeding the request buffer, leading to information disclosure. A write path also exists but requires byte-swapped clients which is disabled by default.
🎖@cveNotify
🚨 CVE-2026-50263
A use-after-free flaw was found in the X.Org X server and Xwayland in CreateSaverWindow(). A client can trigger a use-after-free read after changing window attributes and forcing the screen saver, leading to information disclosure.
🎖@cveNotify
A use-after-free flaw was found in the X.Org X server and Xwayland in CreateSaverWindow(). A client can trigger a use-after-free read after changing window attributes and forcing the screen saver, leading to information disclosure.
🎖@cveNotify
🚨 CVE-2026-50264
An out-of-bounds write flaw was found in the X.Org X server and Xwayland in DRIGetBuffers/DRIGetBuffersWithFormat. A client that requests multiple DRI2BufferBackLeft attachments and one DRI2BufferFrontLeft can trigger an out-of-bounds heap write. This may be used to crash the server, or for privilege escalation if the X server runs as root.
🎖@cveNotify
An out-of-bounds write flaw was found in the X.Org X server and Xwayland in DRIGetBuffers/DRIGetBuffersWithFormat. A client that requests multiple DRI2BufferBackLeft attachments and one DRI2BufferFrontLeft can trigger an out-of-bounds heap write. This may be used to crash the server, or for privilege escalation if the X server runs as root.
🎖@cveNotify
🚨 CVE-2026-17523
A flaw was found in the kernel. An unprivileged local user can exploit this vulnerability to execute arbitrary code within the kernel, which leads to a local privilege escalation (LPE). This allows the attacker to gain root privileges and take full control of the affected system.
🎖@cveNotify
A flaw was found in the kernel. An unprivileged local user can exploit this vulnerability to execute arbitrary code within the kernel, which leads to a local privilege escalation (LPE). This allows the attacker to gain root privileges and take full control of the affected system.
🎖@cveNotify
🚨 CVE-2026-17527
In containerized-data-importer (CDI), the aggregated cdi.kubevirt.io:view ClusterRole, intended to provide read-only access to CDI resources, includes a rule granting create on the datavolumes/source subresource. CDI's DataVolume clone authorization accepts this permission as sufficient to authorize cloning the contents of any PVC the caller can name, without requiring write access to the source namespace. A user or service account bound to the view role, commonly granted cluster-wide via ClusterRoleBinding, who also has ordinary write access (edit/admin) to any single namespace, can use this to exfiltrate the contents of any PVC in the cluster into a namespace they control, bypassing namespace isolation and the read-only guarantee of the view role.
🎖@cveNotify
In containerized-data-importer (CDI), the aggregated cdi.kubevirt.io:view ClusterRole, intended to provide read-only access to CDI resources, includes a rule granting create on the datavolumes/source subresource. CDI's DataVolume clone authorization accepts this permission as sufficient to authorize cloning the contents of any PVC the caller can name, without requiring write access to the source namespace. A user or service account bound to the view role, commonly granted cluster-wide via ClusterRoleBinding, who also has ordinary write access (edit/admin) to any single namespace, can use this to exfiltrate the contents of any PVC in the cluster into a namespace they control, bypassing namespace isolation and the read-only guarantee of the view role.
🎖@cveNotify
🚨 CVE-2026-17534
Kimi Code (@moonshot-ai/kimi-code) before 0.27.0 implements FetchURL SSRF hardening as a static hostname and IP-literal denylist in assertSafeFetchTarget, without resolving DNS or re-validating hosts after HTTP redirects. An attacker who can influence a FetchURL call (for example via prompt injection) can supply a crafted public hostname that resolves to loopback or another internal address, or a public URL that redirects to such a target, and thereby reach internal network services that the denylist was intended to block. FetchURL is included in the default auto-approve tool set, so the call does not require interactive user confirmation in manual mode.
🎖@cveNotify
Kimi Code (@moonshot-ai/kimi-code) before 0.27.0 implements FetchURL SSRF hardening as a static hostname and IP-literal denylist in assertSafeFetchTarget, without resolving DNS or re-validating hosts after HTTP redirects. An attacker who can influence a FetchURL call (for example via prompt injection) can supply a crafted public hostname that resolves to loopback or another internal address, or a public URL that redirects to such a target, and thereby reach internal network services that the denylist was intended to block. FetchURL is included in the default auto-approve tool set, so the call does not require interactive user confirmation in manual mode.
🎖@cveNotify
GitHub
GitHub - MoonshotAI/kimi-code: Kimi Code CLI — The Starting Point for Next-Gen Agents
Kimi Code CLI — The Starting Point for Next-Gen Agents - MoonshotAI/kimi-code
🚨 CVE-2026-40000
The Activity zte.com.cn.filer/zte.com.cn.filer.FilePreViewActivity within ZTE File Manager is designed to preview compressed files. Third-party applications can launch this Activity and supply arbitrary file paths (e.g., content://zte.com.cn.filer.fileprovider/root_path), enabling file access with the privilege level of ZTE File Manager. This allows unrooted devices to read files under certain system directories such as /data/data and /data/local/tmp. If access restrictions do not block untrusted applications, additional directories may also be accessible.
🎖@cveNotify
The Activity zte.com.cn.filer/zte.com.cn.filer.FilePreViewActivity within ZTE File Manager is designed to preview compressed files. Third-party applications can launch this Activity and supply arbitrary file paths (e.g., content://zte.com.cn.filer.fileprovider/root_path), enabling file access with the privilege level of ZTE File Manager. This allows unrooted devices to read files under certain system directories such as /data/data and /data/local/tmp. If access restrictions do not block untrusted applications, additional directories may also be accessible.
🎖@cveNotify
🚨 CVE-2026-14474
A flaw was found in SSSD's LDAP sudo provider. When the ldap_sudo_search_base option is not explicitly configured, SSSD searches the entire LDAP directory tree for sudoRole objects. An authenticated attacker with write access to any subtree can inject a sudoRole object granting root-level sudo privileges on all SSSD-enrolled hosts.
🎖@cveNotify
A flaw was found in SSSD's LDAP sudo provider. When the ldap_sudo_search_base option is not explicitly configured, SSSD searches the entire LDAP directory tree for sudoRole objects. An authenticated attacker with write access to any subtree can inject a sudoRole object granting root-level sudo privileges on all SSSD-enrolled hosts.
🎖@cveNotify
🚨 CVE-2026-14476
A path traversal flaw was found in SSSD's AD GPO provider. The ad_gpo_extract_smb_components() function does not sanitize .. sequences in the gPCFileSysPath LDAP attribute, allowing an attacker with AD GPO management access to write files outside the GPO cache directory as root. On default RHEL configurations with SELinux enforcing, this can be used to inject Kerberos configuration leading to authentication bypass.
🎖@cveNotify
A path traversal flaw was found in SSSD's AD GPO provider. The ad_gpo_extract_smb_components() function does not sanitize .. sequences in the gPCFileSysPath LDAP attribute, allowing an attacker with AD GPO management access to write files outside the GPO cache directory as root. On default RHEL configurations with SELinux enforcing, this can be used to inject Kerberos configuration leading to authentication bypass.
🎖@cveNotify