🚨 CVE-2025-7425
A flaw was found in libxslt where the attribute type, atype, flags are modified in a way that corrupts internal memory management. When XSLT functions, such as the key() process, result in tree fragments, this corruption prevents the proper cleanup of ID attributes. As a result, the system may access freed memory, causing crashes or enabling attackers to trigger heap corruption.

🎖@cveNotify

🚨 CVE-2026-2100
A flaw was found in p11-kit. A remote attacker could exploit this vulnerability by calling the C_DeriveKey function on a remote token with specific IBM kyber or IBM btc derive mechanism parameters set to NULL. This could lead to the RPC-client attempting to return an uninitialized value, potentially resulting in a NULL dereference or undefined behavior. This issue may cause an application level denial of service or other unpredictable system states.

🎖@cveNotify

🚨 CVE-2020-19909
Integer overflow vulnerability in tool_operate.c in curl 7.65.2 via a large value as the retry delay. NOTE: many parties report that this has no direct security impact on the curl user; however, it may (in theory) cause a denial of service to associated systems or networks if, for example, --retry-delay is misinterpreted as a value much smaller than what was intended. This is not especially plausible because the overflow only happens if the user was trying to specify that curl should wait weeks (or longer) before trying to recover from a transient error.

🎖@cveNotify

🚨 CVE-2026-17432
A vulnerability was detected in NousResearch hermes-agent 2026.6.5. Affected by this vulnerability is an unknown functionality of the file hermes-agent/plugins/platforms/simplex/adapter.py of the component SimpleX Gateway Authorization. The manipulation of the argument contactId results in improper access controls. The attack may be launched remotely. A high complexity level is associated with this attack. The exploitation appears to be difficult. The exploit is now public and may be used. The patch is identified as 490c486ff65b766d9de0fe0e6f26e1778aaa8fb3. Applying a patch is advised to resolve this issue.

🎖@cveNotify

🚨 CVE-2025-7195
Early versions of Operator-SDK provided an insecure method to allow operator containers to run in environments that used a random UID. Operator-SDK before 0.15.2 provided a script, user_setup, which modifies the permissions of the /etc/passwd file to 664 during build time. Developers who used Operator-SDK before 0.15.2 to scaffold their operator may still be impacted by this if the insecure user_setup script is still being used to build new container images.

In affected images, the /etc/passwd file is created during build time with group-writable permissions and a group ownership of root (gid=0). An attacker who can execute commands within an affected container, even as a non-root user, may be able to leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.

🎖@cveNotify

🚨 CVE-2026-15962
The Fluent Forms Pro Add On Pack plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 6.2.6 via deserialization of untrusted input. This makes it possible for authenticated attackers, with Subscriber-level access and above, to inject a PHP Object. The additional presence of a POP chain allows attackers to change user passwords and potentially take over administrator accounts. Note: This can only be exploited if user update integration is enabled and a user meta field is mapped.

🎖@cveNotify

🚨 CVE-2026-17433
A vulnerability was detected in nanocoai NanoClaw up to 2.0.64. This impacts the function createChatSdkBridge.setup of the file src/channels/chat-sdk-bridge.ts of the component MCP Server Approval. Performing a manipulation results in improper authorization. The attack needs to be approached locally. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

🎖@cveNotify

🚨 CVE-2026-17434
A flaw has been found in nanocoai NanoClaw up to 2.0.64. Affected is the function handleAddMcpServer of the file src/modules/self-mod/request.ts of the component add_mcp_server. Executing a manipulation can lead to improper authorization. The attack may be launched remotely. The exploit has been published and may be used. This patch is called e5b928783d5c485637565eb07d2967922dfbf8d8. A patch should be applied to remediate this issue.

🎖@cveNotify

🚨 CVE-2026-63720
datamodel-code-generator prior to version 0.70.0 contains a code injection vulnerability that allows attackers who control input schemas to achieve remote code execution by supplying a malicious customBasePath value containing embedded newlines and a dot-free Python expression. The crafted value is emitted verbatim into a generated 'from ... import ...' statement without identifier validation, causing arbitrary Python code to execute when the generated module is imported.

🎖@cveNotify

🚨 CVE-2026-46579
A flaw was found in the OpenShift Router. When a Route has `insecureEdgeTerminationPolicy` set to Allow, the HTTP frontend does not remove `X-SSL-Client-*` headers from incoming requests. This allows an unauthenticated attacker to send plain HTTP requests with crafted `X-SSL-Client-*` headers. As a result, backends relying on these headers for mutual TLS (Transport Layer Security) authentication can be bypassed, enabling the attacker to impersonate client certificate identities.

🎖@cveNotify

🚨 CVE-2026-1784
The Route OpenShift resource allows to define routes to make pods reachable at a subdomain through HAProxy. It was found that the checks performed on the spec.path YAML stanza in a Route document was insufficient and could allow a controlled injection of the HAProxy configuration.

🎖@cveNotify

🚨 CVE-2024-14040
In the Linux kernel, the following vulnerability has been resolved:

net: nexthop: Increase weight to u16

In CLOS networks, as link failures occur at various points in the network,
ECMP weights of the involved nodes are adjusted to compensate. With high
fan-out of the involved nodes, and overall high number of nodes,
a (non-)ECMP weight ratio that we would like to configure does not fit into
8 bits. Instead of, say, 255:254, we might like to configure something like
1000:999. For these deployments, the 8-bit weight may not be enough.

To that end, in this patch increase the next hop weight from u8 to u16.

Increasing the width of an integral type can be tricky, because while the
code still compiles, the types may not check out anymore, and numerical
errors come up. To prevent this, the conversion was done in two steps.
First the type was changed from u8 to a single-member structure, which
invalidated all uses of the field. This allowed going through them one by
one and audit for type correctness. Then the structure was replaced with a
vanilla u16 again. This should ensure that no place was missed.

The UAPI for configuring nexthop group members is that an attribute
NHA_GROUP carries an array of struct nexthop_grp entries:

struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 resvd1;
__u16 resvd2;
};

The field resvd1 is currently validated and required to be zero. We can
lift this requirement and carry high-order bits of the weight in the
reserved field:

struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 weight_high;
__u16 resvd2;
};

Keeping the fields split this way was chosen in case an existing userspace
makes assumptions about the width of the weight field, and to sidestep any
endianness issues.

The weight field is currently encoded as the weight value minus one,
because weight of 0 is invalid. This same trick is impossible for the new
weight_high field, because zero must mean actual zero. With this in place:

- Old userspace is guaranteed to carry weight_high of 0, therefore
configuring 8-bit weights as appropriate. When dumping nexthops with
16-bit weight, it would only show the lower 8 bits. But configuring such
nexthops implies existence of userspace aware of the extension in the
first place.

- New userspace talking to an old kernel will work as long as it only
attempts to configure 8-bit weights, where the high-order bits are zero.
Old kernel will bounce attempts at configuring >8-bit weights.

Renaming reserved fields as they are allocated for some purpose is commonly
done in Linux. Whoever touches a reserved field is doing so at their own
risk. nexthop_grp::resvd1 in particular is currently used by at least
strace, however they carry an own copy of UAPI headers, and the conversion
should be trivial. A helper is provided for decoding the weight out of the
two fields. Forcing a conversion seems preferable to bending backwards and
introducing anonymous unions or whatever.

🎖@cveNotify

🚨 CVE-2026-64530
In the Linux kernel, the following vulnerability has been resolved:

net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle

tcf_classify() can return TC_ACT_CONSUMED while the skb is held by the
defragmentation engine (e.g. act_ct on out-of-order fragments). When
that happens the skb is no longer owned by the caller and must not be
touched again.

tcf_qevent_handle() did not handle TC_ACT_CONSUMED: it fell through the
switch and returned the skb to the caller as if classification had
passed. The only qdisc that wires up qevents today is RED, via three call sites
(qe_mark on RED_PROB_MARK/HARD_MARK, qe_early_drop on congestion_drop)
red_enqueue() was continuing to operate on an skb it no longer owns in this
case -- enqueueing it, dropping it, or updating statistics. Resulting in a UAF.

tc qdisc add dev eth0 root handle 1: red ... qevent early_drop block 10
tc filter add block 10 ... action ct

(with ct defrag enabled and traffic that produces out-of-order
fragments, e.g. a fragmented UDP stream)

Handle TC_ACT_CONSUMED in tcf_qevent_handle() the same way the ingress
and egress fast paths do: treat it as stolen and return NULL without
touching the skb. Unlike the TC_ACT_STOLEN case, the skb must not be
dropped/freed here, as it is no longer owned by us.

🎖@cveNotify

🚨 CVE-2025-5914
A vulnerability has been identified in the libarchive library, specifically within the archive_read_format_rar_seek_data() function. This flaw involves an integer overflow that can ultimately lead to a double-free condition. Exploiting a double-free vulnerability can result in memory corruption, enabling an attacker to execute arbitrary code or cause a denial-of-service condition.

🎖@cveNotify

🚨 CVE-2025-7425
A flaw was found in libxslt where the attribute type, atype, flags are modified in a way that corrupts internal memory management. When XSLT functions, such as the key() process, result in tree fragments, this corruption prevents the proper cleanup of ID attributes. As a result, the system may access freed memory, causing crashes or enabling attackers to trigger heap corruption.

🎖@cveNotify

🚨 CVE-2026-4878
A flaw was found in libcap. A local unprivileged user can exploit a Time-of-check-to-time-of-use (TOCTOU) race condition in the `cap_set_file()` function. This allows an attacker with write access to a parent directory to redirect file capability updates to an attacker-controlled file. By doing so, capabilities can be injected into or stripped from unintended executables, leading to privilege escalation.

🎖@cveNotify

🚨 CVE-2026-7374
A flaw was found in KubeVirt's virt-handler component. This vulnerability allows an authenticated OpenShift user with edit permissions in a single namespace to exploit improper symlink validation when connecting to virtual machine console sockets. By replacing the console socket with a symlink to the host's container runtime (CRI-O) socket, an attacker can hijack virt-handler's privileged connection. This enables the attacker to access any Unix socket on the host, potentially leading to full control of the node and the entire cluster.

🎖@cveNotify

🚨 CVE-2026-17457
A vulnerability has been found in mf-yang openclaw-cn up to 0.2.1. Affected by this issue is the function assertBrowserNavigationAllowed of the file src/browser/navigation-guard.ts of the component Scheme Handler. Such manipulation of the argument url leads to information disclosure. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

🎖@cveNotify

🚨 CVE-2025-7195
Early versions of Operator-SDK provided an insecure method to allow operator containers to run in environments that used a random UID. Operator-SDK before 0.15.2 provided a script, user_setup, which modifies the permissions of the /etc/passwd file to 664 during build time. Developers who used Operator-SDK before 0.15.2 to scaffold their operator may still be impacted by this if the insecure user_setup script is still being used to build new container images.

In affected images, the /etc/passwd file is created during build time with group-writable permissions and a group ownership of root (gid=0). An attacker who can execute commands within an affected container, even as a non-root user, may be able to leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.

🎖@cveNotify

🚨 CVE-2026-9804
A flaw was found in KubeVirt's virt-exportserver component. An attacker with specific namespace-level access can exploit a path traversal vulnerability in the VMExport directory endpoint. By placing a symbolic link (symlink) within an exported filesystem Persistent Volume Claim (PVC) that points outside its designated mount root, the attacker can read arbitrary files from the exporter pod's filesystem. This leads to information disclosure, potentially exposing sensitive data.

🎖@cveNotify

🚨 CVE-2026-17458
A vulnerability was found in mf-yang openclaw-cn up to 0.2.1. This affects the function clickViaPlaywright of the file src/browser/routes/agent.act.ts of the component Browser Control HTTP API. Performing a manipulation results in server-side request forgery. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet.

🎖@cveNotify