🚨 CVE-2026-42789
Improper Following of a Certificate's Chain of Trust vulnerability in Erlang OTP public_key (pubkey_cert module) allows a non-CA certificate to be accepted as an intermediate issuer, enabling certificate chain forgery.

In lib/public_key/src/pubkey_cert.erl, pubkey_cert:validate_extensions/7 contains two flaws that together allow a certificate with basicConstraints cA:false and no keyUsage extension to be used as an intermediate issuer in a chain passed to public_key:pkix_path_validation/3: the cA:false clause recurses into the remaining extensions without rejecting the certificate when it is in issuer position, and the keyUsage check only fires when the extension is present, so a certificate lacking keyUsage entirely bypasses the keyCertSign enforcement.

Any party holding an end-entity certificate with basicConstraints cA:false and no keyUsage extension, issued by any CA in the victim's trust store, can use that certificate's private key to sign forged leaf certificates for arbitrary identities. public_key:pkix_path_validation/3 accepts the resulting chain, and by extension every TLS or mTLS endpoint built on the OTP ssl application that relies on the default verifier is affected, including server identity verification on the client side and client certificate verification on mTLS servers.

This issue affects OTP from OTP 17.0 before OTP 29.0.1, OTP 28.5.0.1, OTP 27.3.4.12 and OTP 26.2.5.21, corresponding to public_key from 0.22 before 1.21.1, 1.20.3.1, 1.17.1.3 and 1.15.1.7.

🎖@cveNotify

🚨 CVE-2026-42791
Improper Certificate Validation vulnerability in Erlang OTP public_key (pubkey_ocsp module) allows forged OCSP responses signed with an expired responder certificate to be accepted as valid.

OCSP response verification in pubkey_ocsp:verify_response/5 and pubkey_ocsp:is_authorized_responder/3 in lib/public_key/src/pubkey_ocsp.erl does not check the validity period (notBefore/notAfter) of the OCSP responder certificate. An attacker who has obtained the private key of an expired CA-designated OCSP responder certificate can forge OCSP responses that Erlang/OTP accepts as valid.

This affects TLS clients using OCSP stapling via the ssl application: a malicious or compromised server can present a revoked TLS certificate together with a forged OCSP response signed by an expired responder key, and the client will accept the revoked certificate as valid. It also affects applications calling public_key:pkix_ocsp_validate/5 directly, where the impact depends on the use case — server-side client certificate validation using this API may allow authentication bypass with a revoked client certificate.

This issue affects OTP from OTP 27.0 before OTP 29.0.1, OTP 28.5.0.1 and OTP 27.3.4.12, corresponding to public_key from 1.16 before 1.21.1, 1.20.3.1 and 1.17.1.3.

🎖@cveNotify

🚨 CVE-2026-45944
In the Linux kernel, the following vulnerability has been resolved:

iommu/vt-d: Clear Present bit before tearing down context entry

When tearing down a context entry, the current implementation zeros the
entire 128-bit entry using multiple 64-bit writes. This creates a window
where the hardware can fetch a "torn" entry — where some fields are
already zeroed while the 'Present' bit is still set — leading to
unpredictable behavior or spurious faults.

While x86 provides strong write ordering, the compiler may reorder writes
to the two 64-bit halves of the context entry. Even without compiler
reordering, the hardware fetch is not guaranteed to be atomic with
respect to multiple CPU writes.

Align with the "Guidance to Software for Invalidations" in the VT-d spec
(Section 6.5.3.3) by implementing the recommended ownership handshake:

1. Clear only the 'Present' (P) bit of the context entry first to
signal the transition of ownership from hardware to software.
2. Use dma_wmb() to ensure the cleared bit is visible to the IOMMU.
3. Perform the required cache and context-cache invalidation to ensure
hardware no longer has cached references to the entry.
4. Fully zero out the entry only after the invalidation is complete.

Also, add a dma_wmb() to context_set_present() to ensure the entry
is fully initialized before the 'Present' bit becomes visible.

🎖@cveNotify

🚨 CVE-2026-42790
Improper Certificate Validation vulnerability in Erlang OTP public_key (pubkey_cert and public_key modules) allows a DNS nameConstraints bypass via subject CommonName fallback in TLS hostname verification.

Two flaws combine to allow a subordinate CA whose DNS nameConstraints are restricted (e.g. permitted;DNS:allowed.example.com) to issue a leaf certificate that an OTP TLS client accepts as a valid identity for an out-of-scope hostname (e.g. victim.example.com):

First, pubkey_cert:validate_names/6 in lib/public_key/src/pubkey_cert.erl only checks SAN DNS entries against nameConstraints. Per RFC 5280, a permitted DNS subtree only restricts certificates that contain a DNS-typed name. A leaf with no subjectAltName therefore trivially satisfies any permitted;DNS:... constraint regardless of its subject commonName.

Second, public_key:pkix_verify_hostname/3 in lib/public_key/src/public_key.erl falls back to the subject commonName when no subjectAltName is present, extracting id-at-commonName attributes as presented IDs and matching them against the reference hostname. The strict pkix_verify_hostname_match_fun(https) matcher does not suppress this fallback.

The result is that path validation accepts a CN-only leaf under a DNS-constrained intermediate (no SAN means the nameConstraints are not triggered), and hostname verification then accepts it via the CN fallback. The bypass is reachable from stock ssl:connect with verify_peer, a trusted CA, SNI, and the canonical strict https hostname matcher.

This issue affects OTP from OTP 19.3 before OTP 29.0.1, OTP 28.5.0.1, OTP 27.3.4.12 and OTP 26.2.5.21, corresponding to public_key from 1.4 before 1.21.1, 1.20.3.1, 1.17.1.3 and 1.15.1.7.

🎖@cveNotify

🚨 CVE-2026-46116
In the Linux kernel, the following vulnerability has been resolved:

xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete

KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s
hlist_del_rcu calls under syzkaller load on linux-6.12.y stable
(reproduced on 6.12.47, also reachable via the same code path on
torvalds/master and on the ipsec tree). Nine unique signatures cluster
in the xfrm_state lifecycle, the load-bearing one being:

BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline]
BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline]
BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c
Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435

Workqueue: netns cleanup_net
Call Trace:
__hlist_del / hlist_del_rcu
__xfrm_state_delete
xfrm_state_delete
xfrm_state_flush
xfrm_state_fini
ops_exit_list
cleanup_net

The other observed signatures hit the same slab object from
__xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB
write variant of __xfrm_state_delete, all on the byseq/byspi
hash chains.

__xfrm_state_delete() guards its byseq and byspi unhashes with
value-based predicates:

if (x->km.seq)
hlist_del_rcu(&x->byseq);
if (x->id.spi)
hlist_del_rcu(&x->byspi);

while everywhere else in the file (e.g. state_cache, state_cache_input)
the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets
x->id.spi = newspi inside xfrm_state_lock and then immediately inserts
into byspi, but a path that observes x->id.spi != 0 outside of
xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently
with whether x is actually on the list. The same holds for x->km.seq
versus byseq, and the bydst/bysrc unhashes have no predicate at all,
so a second __xfrm_state_delete() on the same object writes through
LIST_POISON pprev.

The defensive change here:

- Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst,
bysrc, byseq and byspi so a second deletion is a no-op rather
than a write through LIST_POISON pprev. The byseq/byspi nodes
are already initialised in xfrm_state_alloc().
- Test hlist_unhashed() rather than the value predicate for
byseq/byspi, so the unhash decision tracks list state rather than
mutable scalar fields.

Empirical verification: applied this patch on top of v6.12.47, rebuilt,
and re-ran the same syzkaller harness for 1h16m on a previously-crashy
configuration that produced ~100 hits each of slab-use-after-free
Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in
__xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at
~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo
confirms the xfrm_state slab is actively allocated and freed during
the run (~143 KiB resident), so the fuzzer is still exercising those
code paths -- they just no longer crash.

Reproduction:

- Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV
- syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db
- 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal
- 9 unique signatures collected in ~9h, all within xfrm_state
lifecycle

🎖@cveNotify

🚨 CVE-2026-46135
In the Linux kernel, the following vulnerability has been resolved:

nvmet-tcp: fix race between ICReq handling and queue teardown

nvmet_tcp_handle_icreq() updates queue->state after sending an
Initialization Connection Response (ICResp), but it does so without
serializing against target-side queue teardown.

If an NVMe/TCP host sends an Initialization Connection Request
(ICReq) and immediately closes the connection, target-side teardown
may start in softirq context before io_work drains the already
buffered ICReq. In that case, nvmet_tcp_schedule_release_queue()
sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue
reference under state_lock.

If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can
still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the
DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and
allows a later socket state change to re-enter teardown and issue a
second kref_put() on an already released queue.

The ICResp send failure path has the same problem. If teardown has
already moved the queue to DISCONNECTING, a send error can still
overwrite the state with NVMET_TCP_Q_FAILED, again reopening the
window for a second teardown path to drop the queue reference.

Fix this by serializing both post-send state transitions with
state_lock and bailing out if teardown has already started.

Use -ESHUTDOWN as an internal sentinel for that bail-out path rather
than propagating it as a transport error like -ECONNRESET. Keep
nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before
honoring that sentinel so receive-side parsing stays quiesced until the
existing release path completes.

🎖@cveNotify

🚨 CVE-2026-46242
In the Linux kernel, the following vulnerability has been resolved:

eventpoll: fix ep_remove struct eventpoll / struct file UAF

ep_remove() (via ep_remove_file()) cleared file->f_ep under
file->f_lock but then kept using @file inside the critical section
(is_file_epoll(), hlist_del_rcu() through the head, spin_unlock).
A concurrent __fput() taking the eventpoll_release() fastpath in
that window observed the transient NULL, skipped
eventpoll_release_file() and ran to f_op->release / file_free().

For the epoll-watches-epoll case, f_op->release is
ep_eventpoll_release() -> ep_clear_and_put() -> ep_free(), which
kfree()s the watched struct eventpoll. Its embedded ->refs
hlist_head is exactly where epi->fllink.pprev points, so the
subsequent hlist_del_rcu()'s "*pprev = next" scribbles into freed
kmalloc-192 memory.

In addition, struct file is SLAB_TYPESAFE_BY_RCU, so the slot
backing @file could be recycled by alloc_empty_file() --
reinitializing f_lock and f_ep -- while ep_remove() is still
nominally inside that lock. The upshot is an attacker-controllable
kmem_cache_free() against the wrong slab cache.

Pin @file via epi_fget() at the top of ep_remove() and gate the
critical section on the pin succeeding. With the pin held @file
cannot reach refcount zero, which holds __fput() off and
transitively keeps the watched struct eventpoll alive across the
hlist_del_rcu() and the f_lock use, closing both UAFs.

If the pin fails @file has already reached refcount zero and its
__fput() is in flight. Because we bailed before clearing f_ep,
that path takes the eventpoll_release() slow path into
eventpoll_release_file() and blocks on ep->mtx until the waiter
side's ep_clear_and_put() drops it. The bailed epi's share of
ep->refcount stays intact, so the trailing ep_refcount_dec_and_test()
in ep_clear_and_put() cannot free the eventpoll out from under
eventpoll_release_file(); the orphaned epi is then cleaned up
there.

A successful pin also proves we are not racing
eventpoll_release_file() on this epi, so drop the now-redundant
re-check of epi->dying under f_lock. The cheap lockless
READ_ONCE(epi->dying) fast-path bailout stays.

🎖@cveNotify

🚨 CVE-2026-11332
A flaw was found in ansible-core. The ansible-galaxy role install command processes dependency specifications from a role's meta/requirements.yml file. Due to improper neutralization of argument delimiters, a malicious role author can inject arbitrary git configuration flags through the src field. This allows arbitrary code execution on the machine of a user who installs the role via ansible-galaxy role install.

🎖@cveNotify

🚨 CVE-2026-48855
Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Erlang OTP ssh (ssh_sftpd module) allows File Discovery.

The SSH_FXP_READLINK handler in ssh_sftpd sends the raw result of file:read_link/2 to the client without calling chroot_filename/2 to strip the backend root prefix. An authenticated SFTP client can create a symlink inside the chroot pointing to /; ssh_sftpd resolves the target to the absolute backend root and stores it on disk. Reading the symlink back via SSH_FXP_READLINK returns that absolute path, for example /data/sftp, instead of the chrooted value /.

The information disclosed is the absolute filesystem path of the SFTP root directory and of any symlink targets within it. No file contents, credentials, or access to paths outside the root directory are obtainable through this issue alone.

This vulnerability is associated with program files lib/ssh/src/ssh_sftpd.erl.

This issue affects OTP from OTP 17.0 before OTP 29.0.2, OTP 28.5.0.2 and OTP 27.3.4.13, corresponding to ssh from 3.0.1 before 6.0.1, 5.5.2.1 and 5.2.11.8.

🎖@cveNotify

🚨 CVE-2026-48856
Sensitive Data Exposure vulnerability in Erlang OTP inets (httpc_response module) allows Retrieve Embedded Sensitive Data.

The httpc client forwards the Authorization and Proxy-Authorization request headers to redirect targets without checking whether the redirect crosses an origin boundary. httpc_response:redirect/2 constructs the redirected request by updating only the host field of the header record; all other fields (including authorization and proxy_authorization) are copied verbatim. The redirect target host is never compared against the original host.

autoredirect defaults to true, so this affects all httpc callers that do not explicitly disable automatic redirects.

An attacker who controls a server that the victim contacts via httpc can issue a cross-origin 3xx redirect to a server they also control. The Authorization header (including Basic credentials derived from URL userinfo via httpc_request:handle_user_info/2) is forwarded to the redirect target, allowing credential theft. The same applies to the Proxy-Authorization header.

This vulnerability is associated with program files lib/inets/src/http_client/httpc_response.erl.

This issue affects OTP from OTP 17.0 before OTP 29.0.2, OTP 28.5.0.2 and OTP 27.3.4.13, corresponding to inets from 5.10 before 9.7.1, 9.6.2.2 and 9.3.2.6.

🎖@cveNotify

🚨 CVE-2026-48858
Server-Side Request Forgery (SSRF) vulnerability in Erlang/OTP ftp (ftp_internal module) allows FTP bounce attacks and SSRF via an unvalidated PASV response IP address.

The ftp_internal:handle_ctrl_result/2 PASV handler (mode=passive, ipfamily=inet, ftp_extension=false) extracts the IP address from the server's 227 response and passes it directly to gen_tcp:connect/4 without validating it against the control connection peer address. The adjacent EPSV handlers correctly call peername(CSock) to derive the IP from the control connection, but the PASV handler does not. A malicious or compromised FTP server can redirect the client's data connection to an arbitrary internal host and port. On read operations (ftp:ls/1,2, ftp:nlist/1,2, ftp:recv/2,3), data from the redirected target is returned to the caller. On write operations (ftp:send/2,3, ftp:append/2,3), file content is sent to the redirected target. This enables SSRF against internal hosts, cloud metadata endpoints, and FTP bounce attacks against third-party hosts.

The vulnerable path is the default configuration (mode=passive, ipfamily=inet, ftp_extension=false). RFC 2577 section 3 explicitly recommends validating the PASV response IP against the control connection peer.

The ftp application is deprecated and scheduled for removal in OTP-30.

This vulnerability is associated with program files lib/inets/src/ftp/ftp_internal.erl (inets 5.10.4 through 6.5, OTP 17.4 through 20.3) and lib/ftp/src/ftp_internal.erl (ftp 1.0 and later, OTP 21.0 and later).

This issue affects OTP from OTP 17.4 before OTP 29.0.2, OTP 28.5.0.2 and OTP 27.3.4.13, corresponding to inets from 5.10.4 before 7.0 and ftp from 1.0 before 1.2.6, 1.2.4.1 and 1.2.3.1.

🎖@cveNotify

🚨 CVE-2026-48859
Observable Timing Discrepancy vulnerability in Erlang/OTP ssh (ssh_auth, ssh_options modules) allows unauthenticated remote username enumeration via timing side-channel in password authentication.

When the SSH daemon is configured with the user_passwords or password option, ssh_auth:check_password/3 performs a PBKDF2-SHA256 computation with 600,000 iterations (~300ms) for valid usernames, but returns immediately (~0ms) for invalid usernames via the ssh_options:get_password_option/2 path. This timing difference is detectable in a single authentication attempt and allows an unauthenticated attacker to distinguish valid from invalid usernames.

The user_passwords and password options are documented as intended for test purposes; the recommended alternative is pwdfun, which is not affected by this vulnerability.

This vulnerability is associated with program files lib/ssh/src/ssh_auth.erl and lib/ssh/src/ssh_options.erl.

This issue affects OTP from OTP 29.0 before OTP 29.0.2, corresponding to ssh from 6.0 before 6.0.1.

🎖@cveNotify

🚨 CVE-2026-48860
Reliance on IP Address for Authentication vulnerability in Erlang/OTP ssl (inet_tls_dist module) allows unauthenticated bypass of the distribution-over-TLS LAN allowlist.

The inet_tls_dist:check_ip/1 function, which enforces a LAN allowlist for Erlang distribution over TLS, calls inet:sockname/1 instead of inet:peername/1 to obtain the peer's IP address. Because inet:sockname/1 returns the local socket address, both the local IP and the supposed peer IP resolve to the same value, causing the subnet mask comparison to always succeed regardless of the actual remote address. Any holder of a CA-signed TLS certificate can therefore bypass the LAN restriction and gain full Erlang distribution access to the node, including rpc:call/4 and code:load_binary/3.

This vulnerability is associated with program file lib/ssl/src/inet_tls_dist.erl.

This issue affects OTP from OTP 26.0 before OTP 29.0.2, OTP 28.5.0.2 and OTP 27.3.4.13, corresponding to ssl from 11.0 before 11.7.2, 11.6.0.2 and 11.2.12.9.

🎖@cveNotify

🚨 CVE-2026-49759
Stack-based Buffer Overflow vulnerability in Erlang OTP erts (inet_drv) allows an unauthenticated remote attacker to crash the BEAM VM by sending a crafted SCTP ERROR chunk.

The sctp_parse_error_chunk function in erts/emulator/drivers/common/inet_drv.c parses SCTP ERROR chunks and writes cause codes into a fixed-size stack-allocated ErlDrvTermData spec[] array without checking bounds. A remote attacker who has established an SCTP association to a listening port can send a single crafted SCTP ERROR chunk containing enough cause codes to overflow the stack buffer, crashing the VM. The attacker can only write 16-bit values interleaved with a fixed tag, so the overflow does not provide a controlled return address, limiting exploitation to Denial of Service.

A crafted SCTP ERROR chunk may also leak bits and pieces of Erlang VM memory into the received error packet observed by the Erlang process. Such data is already readable by the user running the Erlang VM, so the disclosure scope is limited.

This issue affects OTP from OTP 17.0 before OTP 29.0.2, OTP 28.5.0.2 and OTP 27.3.4.13, corresponding to erts from 6.0 before 17.0.2, 16.4.0.2 and 15.2.7.9.

🎖@cveNotify

🚨 CVE-2026-49760
Stack-based Buffer Overflow vulnerability in Erlang OTP (erl_interface) allows Stack-based Buffer Overflow.

This vulnerability is associated with program file lib/erl_interface/src/misc/ei_printterm.c and program routine ei_s_print_term.

The C function ei_s_print_term uses an internal 2000-character stack buffer to format terms. When called with an encoded Erlang term containing a very large integer (encoded representation exceeding 2000 characters), the buffer overflows. The overflow bytes are restricted to the ASCII values of 0-9 and A-F, which limits exploitation to Denial of Service.

The companion function ei_print_term, which prints directly to a FILE instead of a memory buffer, does not contain this bug.

This issue affects OTP from OTP 17.0 before OTP 29.0.2, OTP 28.5.0.2 and OTP 27.3.4.13, corresponding to erl_interface from 3.7.16 before 5.8.1, 5.7.0.1 and 5.5.2.1.

🎖@cveNotify

🚨 CVE-2026-52942
In the Linux kernel, the following vulnerability has been resolved:

netfilter: nf_log: validate MAC header was set before dumping it

The fallback path of dump_mac_header() guards the MAC header access
only with "skb->mac_header != skb->network_header", without checking
skb_mac_header_was_set(). When the MAC header is unset, mac_header is
0xffff, so the test passes and skb_mac_header(skb) returns
skb->head + 0xffff, ~64 KiB past the buffer; the loop then reads
dev->hard_header_len bytes out of bounds into the kernel log.

This is reachable via the netdev logger: nf_log_unknown_packet() calls
dump_mac_header() unconditionally, and an skb sent through AF_PACKET
with PACKET_QDISC_BYPASS reaches the egress hook with mac_header still
unset (__dev_queue_xmit(), which would reset it, is bypassed).

Add the skb_mac_header_was_set() check the ARPHRD_ETHER path already
uses, and replace the open-coded MAC header length test with
skb_mac_header_len(). Only skbs with an unset MAC header are affected;
valid ones are dumped as before.

BUG: KASAN: slab-out-of-bounds in dump_mac_header (net/netfilter/nf_log_syslog.c:831)
Read of size 1 at addr ffff88800ea49d3f by task exploit/148
Call Trace:
kasan_report (mm/kasan/report.c:595)
dump_mac_header (net/netfilter/nf_log_syslog.c:831)
nf_log_netdev_packet (net/netfilter/nf_log_syslog.c:938 net/netfilter/nf_log_syslog.c:963)
nf_log_packet (net/netfilter/nf_log.c:260)
nft_log_eval (net/netfilter/nft_log.c:60)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_netdev (net/netfilter/nft_chain_filter.c:307)
nf_hook_slow (net/netfilter/core.c:619)
nf_hook_direct_egress (net/packet/af_packet.c:257)
packet_xmit (net/packet/af_packet.c:280)
packet_sendmsg (net/packet/af_packet.c:3114)
__sys_sendto (net/socket.c:2265)

🎖@cveNotify

🚨 CVE-2026-53005
In the Linux kernel, the following vulnerability has been resolved:

af_unix: Drop all SCM attributes for SOCKMAP.

SOCKMAP can hide inflight fd from AF_UNIX GC.

When a socket in SOCKMAP receives skb with inflight fd,
sk_psock_verdict_data_ready() looks up the mapped socket and
enqueue skb to its psock->ingress_skb.

Since neither the old nor the new GC can inspect the psock
queue, the hidden skb leaks the inflight sockets. Note that
this cannot be detected via kmemleak because inflight sockets
are linked to a global list.

In addition, SOCKMAP redirect breaks the Tarjan-based GC's
assumption that unix_edge.successor is always alive, which
is no longer true once skb is redirected, resulting in
use-after-free below. [0]

Moreover, SOCKMAP does not call scm_stat_del() properly,
so unix_show_fdinfo() could report an incorrect fd count.

sk_msg_recvmsg() does not support any SCM attributes in the
first place.

Let's drop all SCM attributes before passing skb to the
SOCKMAP layer.

[0]:
BUG: KASAN: slab-use-after-free in unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251)
Read of size 8 at addr ffff888125362670 by task kworker/56:1/496

CPU: 56 UID: 0 PID: 496 Comm: kworker/56:1 Not tainted 7.0.0-rc7-00263-gb9d8b856689d #3 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
Workqueue: events sk_psock_backlog
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:122)
print_report (mm/kasan/report.c:379)
kasan_report (mm/kasan/report.c:597)
unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251)
unix_destroy_fpl (net/unix/garbage.c:317)
unix_destruct_scm (./include/net/scm.h:80 ./include/net/scm.h:86 net/unix/af_unix.c:1976)
sk_psock_backlog (./include/linux/skbuff.h:?)
process_scheduled_works (kernel/workqueue.c:?)
worker_thread (kernel/workqueue.c:?)
kthread (kernel/kthread.c:438)
ret_from_fork (arch/x86/kernel/process.c:164)
ret_from_fork_asm (arch/x86/entry/entry_64.S:258)
</TASK>

Allocated by task 955:
kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78)
__kasan_slab_alloc (mm/kasan/common.c:369)
kmem_cache_alloc_noprof (mm/slub.c:4539)
sk_prot_alloc (net/core/sock.c:2240)
sk_alloc (net/core/sock.c:2301)
unix_create1 (net/unix/af_unix.c:1099)
unix_create (net/unix/af_unix.c:1169)
__sock_create (net/socket.c:1606)
__sys_socketpair (net/socket.c:1811)
__x64_sys_socketpair (net/socket.c:1863 net/socket.c:1860 net/socket.c:1860)
do_syscall_64 (arch/x86/entry/syscall_64.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)

Freed by task 496:
kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78)
kasan_save_free_info (mm/kasan/generic.c:587)
__kasan_slab_free (mm/kasan/common.c:287)
kmem_cache_free (mm/slub.c:6165)
__sk_destruct (net/core/sock.c:2282 net/core/sock.c:2384)
sk_psock_destroy (./include/net/sock.h:?)
process_scheduled_works (kernel/workqueue.c:?)
worker_thread (kernel/workqueue.c:?)
kthread (kernel/kthread.c:438)
ret_from_fork (arch/x86/kernel/process.c:164)
ret_from_fork_asm (arch/x86/entry/entry_64.S:258)

🎖@cveNotify

🚨 CVE-2026-53027
In the Linux kernel, the following vulnerability has been resolved:

fs/ntfs3: fix missing run load for vcn0 in attr_data_get_block_locked()

When a compressed or sparse attribute has its clusters frame-aligned,
vcn is rounded down to the frame start using cmask, which can result
in vcn != vcn0. In this case, vcn and vcn0 may reside in different
attribute segments.

The code already handles the case where vcn is in a different segment
by loading its runs before allocation. However, it fails to load runs
for vcn0 when vcn0 resides in a different segment than vcn. This causes
run_lookup_entry() to return SPARSE_LCN for vcn0 since its segment was
never loaded into the in-memory run list, triggering the WARN_ON(1).

Fix this by adding a missing check for vcn0 after the existing vcn
segment check. If vcn0 falls outside the current segment range
[svcn, evcn1), find and load the attribute segment containing vcn0
before performing the run lookup.

The following scenario triggers the bug:
attr_data_get_block_locked()
vcn = vcn0 & cmask <- vcn != vcn0 after frame alignment
load runs for vcn segment <- vcn0 segment not loaded!
attr_allocate_clusters() <- allocation succeeds
run_lookup_entry(vcn0) <- vcn0 not in run -> SPARSE_LCN
WARN_ON(1) <- bug fires here!

🎖@cveNotify

🚨 CVE-2026-53163
In the Linux kernel, the following vulnerability has been resolved:

locking/rtmutex: Skip remove_waiter() when waiter is not enqueued

syzbot triggered the following splat in remove_waiter() via
FUTEX_CMP_REQUEUE_PI:

KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f]
class_raw_spinlock_constructor
remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561
rt_mutex_start_proxy_lock+0x103/0x120
futex_requeue+0x10e4/0x20d0
__x64_sys_futex+0x34f/0x4d0

task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection,
leaving waiter->task nil, where 3bfdc63936dd ("rtmutex: Use waiter::task instead
of current in remove_waiter()") made this fatal.

Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter()
upon a successfully grabbing the rtmutex. 1a1fb985f2e2 ("futex: Handle early deadlock
return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock()
(where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check to
account for try_to_take_rt_mutex().

🎖@cveNotify

🚨 CVE-2026-53260
In the Linux kernel, the following vulnerability has been resolved:

tcp: Add preempt_{disable,enable}_nested() in reqsk_queue_hash_req().

syzbot reported a weird reqsk->rsk_refcnt underflow in
__inet_csk_reqsk_queue_drop().

The captured reqsk_put() in __inet_csk_reqsk_queue_drop()
is called only when it successfully removes reqsk from ehash.

Moreover, reqsk_timer_handler() calls another reqsk_put()
after that.

This indicates that the reqsk was missing both refcnts for
ehash and the timer itself.

Since all the syzbot reports had PREEMPT_RT enabled, the only
possible scenario is that reqsk_queue_hash_req() is preempted
after mod_timer() and before refcount_set(), and then the timer
triggered after 1s aborts the reqsk due to its listener's close().

Let's wrap mod_timer() and refcount_set() with
preempt_disable_nested() and preempt_enable_nested().

Note that inet_ehash_insert() holds the normal spin_lock()
(mutex in PREEMPT_RT), so it must be called outside of
preempt_disable_nested(), but this is fine.

The lookup path just ignores 0 sk_refcnt entries in ehash
and tries to create another reqsk, but this will fail at
inet_ehash_insert().

[0]:
refcount_t: underflow; use-after-free.
WARNING: lib/refcount.c:28 at refcount_warn_saturate+0xb2/0x110 lib/refcount.c:28, CPU#0: ktimers/0/16
Modules linked in:
CPU: 0 UID: 0 PID: 16 Comm: ktimers/0 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)}
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026
RIP: 0010:refcount_warn_saturate+0xb2/0x110 lib/refcount.c:28
Code: e4 7d d1 0a 67 48 0f b9 3a eb 4a e8 38 3d 23 fd 48 8d 3d e1 7d d1 0a 67 48 0f b9 3a eb 37 e8 25 3d 23 fd 48 8d 3d de 7d d1 0a <67> 48 0f b9 3a eb 24 e8 12 3d 23 fd 48 8d 3d db 7d d1 0a 67 48 0f
RSP: 0000:ffffc90000157948 EFLAGS: 00010246
RAX: ffffffff84a1301b RBX: 0000000000000003 RCX: ffff88801ca98000
RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffffffff8f72ae00
RBP: ffffffff99ae3b01 R08: ffff88801ca98000 R09: 0000000000000005
R10: 0000000000000100 R11: 0000000000000004 R12: ffff8880425ef568
R13: ffff8880425ef4f8 R14: ffff8880425ef578 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff888126386000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7b46710e9c CR3: 000000000dbb6000 CR4: 00000000003526f0
Call Trace:
<TASK>
__refcount_sub_and_test include/linux/refcount.h:400 [inline]
__refcount_dec_and_test include/linux/refcount.h:432 [inline]
refcount_dec_and_test include/linux/refcount.h:450 [inline]
reqsk_put include/net/request_sock.h:136 [inline]
__inet_csk_reqsk_queue_drop+0x3ce/0x440 net/ipv4/inet_connection_sock.c:1007
reqsk_timer_handler+0x651/0xdf0 net/ipv4/inet_connection_sock.c:1137
call_timer_fn+0x192/0x5e0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers kernel/time/timer.c:2374 [inline]
__run_timer_base+0x6a3/0x9f0 kernel/time/timer.c:2386
run_timer_base kernel/time/timer.c:2395 [inline]
run_timer_softirq+0x67/0x170 kernel/time/timer.c:2403
handle_softirqs+0x1de/0x6d0 kernel/softirq.c:622
__do_softirq kernel/softirq.c:656 [inline]
run_ktimerd+0x69/0x100 kernel/softirq.c:1151
smpboot_thread_fn+0x541/0xa50 kernel/smpboot.c:160
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>

🎖@cveNotify

🚨 CVE-2026-53332
In the Linux kernel, the following vulnerability has been resolved:

slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd

When the remoteproc starts in parallel with the NGD driver being probed,
or the remoteproc is already up when the PDR lookup is being registered,
or in the theoretical event that we get an interrupt from the hardware,
these callbacks will operate on uninitialized data. This result in
issues to boot the affected boards.

One such example can be seen in the following fault, where
qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work.

[ 21.858578] ------------[ cut here ]------------
[ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116
...
[ 21.859251] Call trace:
[ 21.859255] __queue_work+0x5e0/0x790 (P)
[ 21.859265] queue_work_on+0x6c/0xf0
[ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl]
[ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl]
[ 21.859318] notifier_call_chain+0xa4/0x230
[ 21.859329] srcu_notifier_call_chain+0x64/0xb8
[ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common]
[ 21.859355] rproc_start+0x130/0x230
[ 21.859367] rproc_boot+0x3d4/0x518
...

Move the enablement of interrupts, and the registration of SSR and PDR
until after the NGD device has been registered.

This could be further refined by moving initialization to the control
driver probe and by removing the platform driver model from the picture.

🎖@cveNotify