🚨 CVE-2026-23942
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Erlang OTP (ssh_sftpd module) allows Path Traversal.

This vulnerability is associated with program files lib/ssh/src/ssh_sftpd.erl and program routines ssh_sftpd:is_within_root/2.

The SFTP server uses string prefix matching via lists:prefix/2 rather than proper path component validation when checking if a path is within the configured root directory. This allows authenticated users to access sibling directories that share a common name prefix with the configured root directory. For example, if root is set to /home/user1, paths like /home/user10 or /home/user1_backup would incorrectly be considered within the root.

This issue affects OTP from OTP 17.0 before OTP 28.4.1, OTP 27.3.4.9 and OTP 26.2.5.18, corresponding to ssh from 3.0.1 before 5.5.1, 5.2.11.6 and 5.1.4.14.

🎖@cveNotify

🚨 CVE-2026-23943
Improper Handling of Highly Compressed Data (Compression Bomb) vulnerability in Erlang OTP ssh (ssh_transport modules) allows Denial of Service via Resource Depletion.

The SSH transport layer advertises legacy zlib compression by default and inflates attacker-controlled payloads pre-authentication without any size limit, enabling reliable memory exhaustion DoS.

Two compression algorithms are affected:

* zlib: Activates immediately after key exchange, enabling unauthenticated attacks
* zlib@openssh.com: Activates post-authentication, enabling authenticated attacks

Each SSH packet can decompress ~255 MB from 256 KB of wire data (1029:1 amplification ratio). Multiple packets can rapidly exhaust available memory, causing OOM kills in memory-constrained environments.

This vulnerability is associated with program files lib/ssh/src/ssh_transport.erl and program routines ssh_transport:decompress/2, ssh_transport:handle_packet_part/4.

This issue affects OTP from OTP 17.0 before OTP 28.4.1, OTP 27.3.4.9 and OTP 26.2.5.18, corresponding to ssh from 3.0.1 before 5.5.1, 5.2.11.6 and 5.1.4.14.

🎖@cveNotify

🚨 CVE-2026-28809
XML External Entity (XXE) vulnerability in esaml (and its forks) allows an attacker to cause the system to read local files and incorporate their contents into processed SAML documents, and potentially perform SSRF via crafted SAML messages.

esaml parses attacker-controlled SAML messages using xmerl_scan:string/2 before signature verification without disabling XML entity expansion. On Erlang/OTP versions before 27, Xmerl allows entities by default, enabling pre-signature XXE attacks. An attacker can cause the host to read local files (e.g., Kubernetes-mounted secrets) into the SAML document. If the attacker is not a trusted SAML SP, signature verification will fail and the document is discarded, but file contents may still be exposed through logs or error messages.

This issue affects all versions of esaml, including forks by arekinath, handnot2, and dropbox. Users running on Erlang/OTP 27 or later are not affected due to Xmerl defaulting to entities disabled.

🎖@cveNotify

🚨 CVE-2026-23451
In the Linux kernel, the following vulnerability has been resolved:

bonding: prevent potential infinite loop in bond_header_parse()

bond_header_parse() can loop if a stack of two bonding devices is setup,
because skb->dev always points to the hierarchy top.

Add new "const struct net_device *dev" parameter to
(struct header_ops)->parse() method to make sure the recursion
is bounded, and that the final leaf parse method is called.

🎖@cveNotify

🚨 CVE-2026-28810
Generation of Predictable Numbers or Identifiers vulnerability in Erlang/OTP kernel (inet_res, inet_db modules) allows DNS Cache Poisoning.

The built-in DNS resolver (inet_res) uses a sequential, process-global 16-bit transaction ID for UDP queries and does not implement source port randomization. Response validation relies almost entirely on this ID, making DNS cache poisoning practical for an attacker who can observe one query or predict the next ID. This conflicts with RFC 5452 recommendations for mitigating forged DNS answers.

inet_res is intended for use in trusted network environments and with trusted recursive resolvers. Earlier documentation did not clearly state this deployment assumption, which could lead users to deploy the resolver in environments where spoofed DNS responses are possible.

This vulnerability is associated with program files lib/kernel/src/inet_db.erl and lib/kernel/src/inet_res.erl.

This issue affects OTP from OTP 17.0 before OTP 28.4.2, OTP 27.3.4.10 and OTP 26.2.5.19, corresponding to kernel from 3.0 before 10.6.2, 10.2.7.4 and 9.2.4.11.

🎖@cveNotify

🚨 CVE-2026-28808
Incorrect Authorization vulnerability in Erlang OTP (inets modules) allows unauthenticated access to CGI scripts protected by directory rules when served via script_alias.

When script_alias maps a URL prefix to a directory outside DocumentRoot, mod_auth evaluates directory-based access controls against the DocumentRoot-relative path while mod_cgi executes the script at the ScriptAlias-resolved path. This path mismatch allows unauthenticated access to CGI scripts that directory rules were meant to protect.

This vulnerability is associated with program files lib/inets/src/http_server/mod_alias.erl, lib/inets/src/http_server/mod_auth.erl, and lib/inets/src/http_server/mod_cgi.erl.

This issue affects OTP from OTP 17.0 before OTP 28.4.2, OTP 27.3.4.10 and OTP 26.2.5.19, corresponding to inets from 5.10 before 9.6.2, 9.3.2.4 and 9.1.0.6.

🎖@cveNotify

🚨 CVE-2026-32144
Improper Certificate Validation vulnerability in Erlang OTP public_key (pubkey_ocsp module) allows OCSP designated-responder authorization bypass via missing signature verification.

The OCSP response validation in public_key:pkix_ocsp_validate/5 does not verify that a CA-designated responder certificate was cryptographically signed by the issuing CA. Instead, it only checks that the responder certificate's issuer name matches the CA's subject name and that the certificate has the OCSPSigning extended key usage. An attacker who can intercept or control OCSP responses can create a self-signed certificate with a matching issuer name and the OCSPSigning EKU, and use it to forge OCSP responses that mark revoked certificates as valid.

This affects SSL/TLS clients using OCSP stapling, which may accept connections to servers with revoked certificates, potentially transmitting sensitive data to compromised servers. Applications using the public_key:pkix_ocsp_validate/5 API directly are also affected, with impact depending on usage context.

This vulnerability is associated with program files lib/public_key/src/pubkey_ocsp.erl and program routines pubkey_ocsp:is_authorized_responder/3.

This issue affects OTP from OTP 27.0 before OTP 28.4.2 and OTP 27.3.4.10, corresponding to public_key from 1.16 before 1.20.3 and 1.17.1.2, and ssl from 11.2 before 11.5.4 and 11.2.12.7.

🎖@cveNotify

🚨 CVE-2026-32147
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Erlang OTP ssh (ssh_sftpd module) allows an authenticated SFTP user to modify file attributes outside the configured chroot directory.

The SFTP daemon (ssh_sftpd) stores the raw, user-supplied path in file handles instead of the chroot-resolved path. When SSH_FXP_FSETSTAT is issued on such a handle, file attributes (permissions, ownership, timestamps) are modified on the real filesystem path, bypassing the root directory boundary entirely.

Any authenticated SFTP user on a server configured with the root option can modify file attributes of files outside the intended chroot boundary. The prerequisite is that a target file must exist on the real filesystem at the same relative path. Note that this vulnerability only allows modification of file attributes; file contents cannot be read or altered through this attack vector.

If the SSH daemon runs as root, this enables direct privilege escalation: an attacker can set the setuid bit on any binary, change ownership of sensitive files, or make system configuration world-writable.

This vulnerability is associated with program files lib/ssh/src/ssh_sftpd.erl and program routines ssh_sftpd:do_open/4 and ssh_sftpd:handle_op/4.

This issue affects OTP from OTP 17.0 before OTP 28.4.3, OTP 27.3.4.11 and OTP 26.2.5.20, corresponding to ssh from 3.0.1 before 5.5.3, 5.2.11.7 and 5.1.4.15.

🎖@cveNotify

🚨 CVE-2026-31502
In the Linux kernel, the following vulnerability has been resolved:

team: fix header_ops type confusion with non-Ethernet ports

Similar to commit 950803f72547 ("bonding: fix type confusion in
bond_setup_by_slave()") team has the same class of header_ops type
confusion.

For non-Ethernet ports, team_setup_by_port() copies port_dev->header_ops
directly. When the team device later calls dev_hard_header() or
dev_parse_header(), these callbacks can run with the team net_device
instead of the real lower device, so netdev_priv(dev) is interpreted as
the wrong private type and can crash.

The syzbot report shows a crash in bond_header_create(), but the root
cause is in team: the topology is gre -> bond -> team, and team calls
the inherited header_ops with its own net_device instead of the lower
device, so bond_header_create() receives a team device and interprets
netdev_priv() as bonding private data, causing a type confusion crash.

Fix this by introducing team header_ops wrappers for create/parse,
selecting a team port under RCU, and calling the lower device callbacks
with port->dev, so each callback always sees the correct net_device
context.

Also pass the selected lower device to the lower parse callback, so
recursion is bounded in stacked non-Ethernet topologies and parse
callbacks always run with the correct device context.

🎖@cveNotify

🚨 CVE-2026-31610
In the Linux kernel, the following vulnerability has been resolved:

ksmbd: fix mechToken leak when SPNEGO decode fails after token alloc

The kernel ASN.1 BER decoder calls action callbacks incrementally as it
walks the input. When ksmbd_decode_negTokenInit() reaches the mechToken
[2] OCTET STRING element, ksmbd_neg_token_alloc() allocates
conn->mechToken immediately via kmemdup_nul(). If a later element in
the same blob is malformed, then the decoder will return nonzero after
the allocation is already live. This could happen if mechListMIC [3]
overrunse the enclosing SEQUENCE.

decode_negotiation_token() then sets conn->use_spnego = false because
both the negTokenInit and negTokenTarg grammars failed. The cleanup at
the bottom of smb2_sess_setup() is gated on use_spnego:

if (conn->use_spnego && conn->mechToken) {
kfree(conn->mechToken);
conn->mechToken = NULL;
}

so the kfree is skipped, causing the mechToken to never be freed.

This codepath is reachable pre-authentication, so untrusted clients can
cause slow memory leaks on a server without even being properly
authenticated.

Fix this up by not checking check for use_spnego, as it's not required,
so the memory will always be properly freed. At the same time, always
free the memory in ksmbd_conn_free() incase some other failure path
forgot to free it.

🎖@cveNotify

🚨 CVE-2026-31703
In the Linux kernel, the following vulnerability has been resolved:

writeback: Fix use after free in inode_switch_wbs_work_fn()

inode_switch_wbs_work_fn() has a loop like:

wb_get(new_wb);
while (1) {
list = llist_del_all(&new_wb->switch_wbs_ctxs);
/* Nothing to do? */
if (!list)
break;
... process the items ...
}

Now adding of items to the list looks like:

wb_queue_isw()
if (llist_add(&isw->list, &wb->switch_wbs_ctxs))
queue_work(isw_wq, &wb->switch_work);

Because inode_switch_wbs_work_fn() loops when processing isw items, it
can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is
empty. This is a problem because in that case wb can get freed (no isw
items -> no wb reference) while the work is still pending causing
use-after-free issues.

We cannot just fix this by cancelling work when freeing wb because that
could still trigger problematic 0 -> 1 transitions on wb refcount due to
wb_get() in inode_switch_wbs_work_fn(). It could be all handled with
more careful code but that seems unnecessarily complex so let's avoid
that until it is proven that the looping actually brings practical
benefit. Just remove the loop from inode_switch_wbs_work_fn() instead.
That way when wb_queue_isw() queues work, we are guaranteed we have
added the first item to wb->switch_wbs_ctxs and nobody is going to
remove it (and drop the wb reference it holds) until the queued work
runs.

🎖@cveNotify

🚨 CVE-2026-39805
Inconsistent Interpretation of HTTP Requests vulnerability in mtrudel bandit allows HTTP request smuggling via duplicate Content-Length headers.

'Elixir.Bandit.Headers':get_content_length/1 in lib/bandit/headers.ex uses List.keyfind/3, which returns only the first matching header. When a request contains two Content-Length headers with different values, Bandit silently accepts it, uses the first value to read the body, and dispatches the remaining bytes as a second pipelined request on the same keep-alive connection. RFC 9112 §6.3 requires recipients to treat this as an unrecoverable framing error.

When Bandit sits behind a proxy that picks the last Content-Length value and forwards the request rather than rejecting it, an unauthenticated attacker can smuggle requests past edge WAF rules, path-based ACLs, rate limiting, and audit logging.

This issue affects bandit: before 1.11.0.

🎖@cveNotify

🚨 CVE-2026-43119
In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: hci_sync: annotate data-races around hdev->req_status

__hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock:

hdev->req_status = HCI_REQ_PEND;

However, several other functions read or write hdev->req_status without
holding any lock:

- hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue)
- hci_cmd_sync_complete() reads/writes from HCI event completion
- hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write
- hci_abort_conn() reads in connection abort path

Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while
hci_send_cmd_sync() runs on hdev->workqueue, these are different
workqueues that can execute concurrently on different CPUs. The plain
C accesses constitute a data race.

Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses
to hdev->req_status to prevent potential compiler optimizations that
could affect correctness (e.g., load fusing in the wait_event
condition or store reordering).

🎖@cveNotify

🚨 CVE-2025-71289
In the Linux kernel, the following vulnerability has been resolved:

fs/ntfs3: handle attr_set_size() errors when truncating files

If attr_set_size() fails while truncating down, the error is silently
ignored and the inode may be left in an inconsistent state.

🎖@cveNotify

🚨 CVE-2026-43456
In the Linux kernel, the following vulnerability has been resolved:

bonding: fix type confusion in bond_setup_by_slave()

kernel BUG at net/core/skbuff.c:2306!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:pskb_expand_head+0xa08/0xfe0 net/core/skbuff.c:2306
RSP: 0018:ffffc90004aff760 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88807e3c8780 RCX: ffffffff89593e0e
RDX: ffff88807b7c4900 RSI: ffffffff89594747 RDI: ffff88807b7c4900
RBP: 0000000000000820 R08: 0000000000000005 R09: 0000000000000000
R10: 00000000961a63e0 R11: 0000000000000000 R12: ffff88807e3c8780
R13: 00000000961a6560 R14: dffffc0000000000 R15: 00000000961a63e0
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe1a0ed8df0 CR3: 000000002d816000 CR4: 00000000003526f0
Call Trace:
<TASK>
ipgre_header+0xdd/0x540 net/ipv4/ip_gre.c:900
dev_hard_header include/linux/netdevice.h:3439 [inline]
packet_snd net/packet/af_packet.c:3028 [inline]
packet_sendmsg+0x3ae5/0x53c0 net/packet/af_packet.c:3108
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa54/0xc30 net/socket.c:2592
___sys_sendmsg+0x190/0x1e0 net/socket.c:2646
__sys_sendmsg+0x170/0x220 net/socket.c:2678
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x106/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe1a0e6c1a9

When a non-Ethernet device (e.g. GRE tunnel) is enslaved to a bond,
bond_setup_by_slave() directly copies the slave's header_ops to the
bond device:

bond_dev->header_ops = slave_dev->header_ops;

This causes a type confusion when dev_hard_header() is later called
on the bond device. Functions like ipgre_header(), ip6gre_header(),all use
netdev_priv(dev) to access their device-specific private data. When
called with the bond device, netdev_priv() returns the bond's private
data (struct bonding) instead of the expected type (e.g. struct
ip_tunnel), leading to garbage values being read and kernel crashes.

Fix this by introducing bond_header_ops with wrapper functions that
delegate to the active slave's header_ops using the slave's own
device. This ensures netdev_priv() in the slave's header functions
always receives the correct device.

The fix is placed in the bonding driver rather than individual device
drivers, as the root cause is bond blindly inheriting header_ops from
the slave without considering that these callbacks expect a specific
netdev_priv() layout.

The type confusion can be observed by adding a printk in
ipgre_header() and running the following commands:

ip link add dummy0 type dummy
ip addr add 10.0.0.1/24 dev dummy0
ip link set dummy0 up
ip link add gre1 type gre local 10.0.0.1
ip link add bond1 type bond mode active-backup
ip link set gre1 master bond1
ip link set gre1 up
ip link set bond1 up
ip addr add fe80::1/64 dev bond1

🎖@cveNotify

🚨 CVE-2026-32687
Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in elixir-ecto postgrex ('Elixir.Postgrex.Notifications' module) allows SQL Injection.

The channel argument passed to 'Elixir.Postgrex.Notifications':listen/3 and 'Elixir.Postgrex.Notifications':unlisten/3 is interpolated directly into LISTEN "..." / UNLISTEN "..." SQL statements without escaping the " character. An attacker who can influence the channel name can inject a " to break out of the quoted identifier and append arbitrary SQL. Because the notifications connection uses the PostgreSQL simple query protocol, multi-statement payloads are accepted, allowing DDL and DML commands to be chained (e.g. ; DROP TABLE ...; --). The same unsanitized interpolation also occurs in handle_connect/1 when replaying LISTEN commands after a reconnect.

This vulnerability is associated with program file lib/postgrex/notifications.ex and program routines 'Elixir.Postgrex.Notifications':listen/3, 'Elixir.Postgrex.Notifications':unlisten/3, 'Elixir.Postgrex.Notifications':handle_connect/1.

This issue affects postgrex: from 0.16.0 before 0.22.2.

🎖@cveNotify

🚨 CVE-2026-43499
In the Linux kernel, the following vulnerability has been resolved:

rtmutex: Use waiter::task instead of current in remove_waiter()

remove_waiter() is used by the slowlock paths, but it is also used for
proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from
futex_requeue().

In the latter case waiter::task is not current, but remove_waiter()
operates on current for the dequeue operation. That results in several
problems:

1) the rbtree dequeue happens without waiter::task::pi_lock being held

2) the waiter task's pi_blocked_on state is not cleared, which leaves a
dangling pointer primed for UAF around.

3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter
task

Use waiter::task instead of current in all related operations in
remove_waiter() to cure those problems.

[ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the
changelog ]

🎖@cveNotify

🚨 CVE-2026-47075
Improper Neutralization of CRLF Sequences vulnerability in benoitc hackney allows HTTP Request Splitting. hackney does not percent-encode carriage return (\r) or line feed (\n) characters in the URL query component before constructing the HTTP/1.1 request target. Characters outside the grammar defined in RFC 3986 Section 3.4 must be percent-encoded, but hackney_url:make_url/3 passes the query binary directly without validation or escaping. An attacker who can control all or part of a URL passed to hackney can inject raw CRLF sequences into the query string, which are then sent as HTTP line breaks in the request target. This enables injection of arbitrary HTTP headers or splitting of the HTTP request.

This issue affects hackney: from 0.13.1 before 4.0.1.

🎖@cveNotify

🚨 CVE-2026-42789
Improper Following of a Certificate's Chain of Trust vulnerability in Erlang OTP public_key (pubkey_cert module) allows a non-CA certificate to be accepted as an intermediate issuer, enabling certificate chain forgery.

In lib/public_key/src/pubkey_cert.erl, pubkey_cert:validate_extensions/7 contains two flaws that together allow a certificate with basicConstraints cA:false and no keyUsage extension to be used as an intermediate issuer in a chain passed to public_key:pkix_path_validation/3: the cA:false clause recurses into the remaining extensions without rejecting the certificate when it is in issuer position, and the keyUsage check only fires when the extension is present, so a certificate lacking keyUsage entirely bypasses the keyCertSign enforcement.

Any party holding an end-entity certificate with basicConstraints cA:false and no keyUsage extension, issued by any CA in the victim's trust store, can use that certificate's private key to sign forged leaf certificates for arbitrary identities. public_key:pkix_path_validation/3 accepts the resulting chain, and by extension every TLS or mTLS endpoint built on the OTP ssl application that relies on the default verifier is affected, including server identity verification on the client side and client certificate verification on mTLS servers.

This issue affects OTP from OTP 17.0 before OTP 29.0.1, OTP 28.5.0.1, OTP 27.3.4.12 and OTP 26.2.5.21, corresponding to public_key from 0.22 before 1.21.1, 1.20.3.1, 1.17.1.3 and 1.15.1.7.

🎖@cveNotify

🚨 CVE-2026-42791
Improper Certificate Validation vulnerability in Erlang OTP public_key (pubkey_ocsp module) allows forged OCSP responses signed with an expired responder certificate to be accepted as valid.

OCSP response verification in pubkey_ocsp:verify_response/5 and pubkey_ocsp:is_authorized_responder/3 in lib/public_key/src/pubkey_ocsp.erl does not check the validity period (notBefore/notAfter) of the OCSP responder certificate. An attacker who has obtained the private key of an expired CA-designated OCSP responder certificate can forge OCSP responses that Erlang/OTP accepts as valid.

This affects TLS clients using OCSP stapling via the ssl application: a malicious or compromised server can present a revoked TLS certificate together with a forged OCSP response signed by an expired responder key, and the client will accept the revoked certificate as valid. It also affects applications calling public_key:pkix_ocsp_validate/5 directly, where the impact depends on the use case — server-side client certificate validation using this API may allow authentication bypass with a revoked client certificate.

This issue affects OTP from OTP 27.0 before OTP 29.0.1, OTP 28.5.0.1 and OTP 27.3.4.12, corresponding to public_key from 1.16 before 1.21.1, 1.20.3.1 and 1.17.1.3.

🎖@cveNotify

🚨 CVE-2026-45944
In the Linux kernel, the following vulnerability has been resolved:

iommu/vt-d: Clear Present bit before tearing down context entry

When tearing down a context entry, the current implementation zeros the
entire 128-bit entry using multiple 64-bit writes. This creates a window
where the hardware can fetch a "torn" entry — where some fields are
already zeroed while the 'Present' bit is still set — leading to
unpredictable behavior or spurious faults.

While x86 provides strong write ordering, the compiler may reorder writes
to the two 64-bit halves of the context entry. Even without compiler
reordering, the hardware fetch is not guaranteed to be atomic with
respect to multiple CPU writes.

Align with the "Guidance to Software for Invalidations" in the VT-d spec
(Section 6.5.3.3) by implementing the recommended ownership handshake:

1. Clear only the 'Present' (P) bit of the context entry first to
signal the transition of ownership from hardware to software.
2. Use dma_wmb() to ensure the cleared bit is visible to the IOMMU.
3. Perform the required cache and context-cache invalidation to ensure
hardware no longer has cached references to the entry.
4. Fully zero out the entry only after the invalidation is complete.

Also, add a dma_wmb() to context_set_present() to ensure the entry
is fully initialized before the 'Present' bit becomes visible.

🎖@cveNotify