🚨 CVE-2025-48044
Incorrect Authorization vulnerability in ash-project ash allows Authentication Bypass. This vulnerability is associated with program files lib/ash/policy/policy.ex and program routines 'Elixir.Ash.Policy.Policy':expression/2.

This issue affects ash: from 3.6.3 before 3.7.1.

🎖@cveNotify

🚨 CVE-2025-40196
In the Linux kernel, the following vulnerability has been resolved:

fs: quota: create dedicated workqueue for quota_release_work

There is a kernel panic due to WARN_ONCE when panic_on_warn is set.

This issue occurs when writeback is triggered due to sync call for an
opened file(ie, writeback reason is WB_REASON_SYNC). When f2fs balance
is needed at sync path, flush for quota_release_work is triggered.
By default quota_release_work is queued to "events_unbound" queue which
does not have WQ_MEM_RECLAIM flag. During f2fs balance "writeback"
workqueue tries to flush quota_release_work causing kernel panic due to
MEM_RECLAIM flag mismatch errors.

This patch creates dedicated workqueue with WQ_MEM_RECLAIM flag
for work quota_release_work.

------------[ cut here ]------------
WARNING: CPU: 4 PID: 14867 at kernel/workqueue.c:3721 check_flush_dependency+0x13c/0x148
Call trace:
check_flush_dependency+0x13c/0x148
__flush_work+0xd0/0x398
flush_delayed_work+0x44/0x5c
dquot_writeback_dquots+0x54/0x318
f2fs_do_quota_sync+0xb8/0x1a8
f2fs_write_checkpoint+0x3cc/0x99c
f2fs_gc+0x190/0x750
f2fs_balance_fs+0x110/0x168
f2fs_write_single_data_page+0x474/0x7dc
f2fs_write_data_pages+0x7d0/0xd0c
do_writepages+0xe0/0x2f4
__writeback_single_inode+0x44/0x4ac
writeback_sb_inodes+0x30c/0x538
wb_writeback+0xf4/0x440
wb_workfn+0x128/0x5d4
process_scheduled_works+0x1c4/0x45c
worker_thread+0x32c/0x3e8
kthread+0x11c/0x1b0
ret_from_fork+0x10/0x20
Kernel panic - not syncing: kernel: panic_on_warn set ...

🎖@cveNotify

🚨 CVE-2026-21618
Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in hexpm hexpm/hexpm ('Elixir.HexpmWeb.SharedAuthorizationView' modules) allows Cross-Site Scripting (XSS). This vulnerability is associated with program files lib/hexpm_web/views/shared_authorization_view.ex and program routines 'Elixir.HexpmWeb.SharedAuthorizationView':render_grouped_scopes/3.

This issue affects hexpm: from 617e44c71f1dd9043870205f371d375c5c4d886d before c692438684ead90c3bcbfb9ccf4e63c768c668a8; hex.pm: from 2025-10-01 before 2026-01-19.

🎖@cveNotify

🚨 CVE-2026-21620
Relative Path Traversal, Improper Isolation or Compartmentalization vulnerability in erlang otp erlang/otp (tftp_file modules), erlang otp inets (tftp_file modules), erlang otp tftp (tftp_file modules) allows Relative Path Traversal. This vulnerability is associated with program files lib/tftp/src/tftp_file.erl, src/tftp_file.erl.

This issue affects OTP from OTP 17.0 before OTP 28.3.2, OTP 27.3.4.8 and OTP 26.2.5.17, corresponding to tftp from 1.0 before 1.2.4, 1.2.2.1 and 1.1.1.1; also inets from 5.10 before 7.0.

🎖@cveNotify

🚨 CVE-2026-23940
Uncontrolled Resource Consumption vulnerability in hexpm hexpm/hexpm allows Excessive Allocation. Publishing an oversized package can cause Hex.pm to run out of memory while extracting the uploaded package tarball. This can terminate the affected application instance and result in a denial of service for package publishing and potentially other package-processing functionality.

This issue affects hexpm: before 495f01607d3eae4aed7ad09b2f54f31ec7a7df01; hex.pm: before 2026-03-10.

🎖@cveNotify

🚨 CVE-2026-23941
Inconsistent Interpretation of HTTP Requests ('HTTP Request Smuggling') vulnerability in Erlang OTP (inets httpd module) allows HTTP Request Smuggling.

This vulnerability is associated with program files lib/inets/src/http_server/httpd_request.erl and program routines httpd_request:parse_headers/7.

The server does not reject or normalize duplicate Content-Length headers. The earliest Content-Length in the request is used for body parsing while common reverse proxies (nginx, Apache httpd, Envoy) honor the last Content-Length value. This violates RFC 9112 Section 6.3 and allows front-end/back-end desynchronization, leaving attacker-controlled bytes queued as the start of the next request.

This issue affects OTP from OTP 17.0 before OTP 28.4.1, OTP 27.3.4.9 and OTP 26.2.5.18, corresponding to inets from 5.10 before 9.6.1, 9.3.2.3 and 9.1.0.5.

🎖@cveNotify

🚨 CVE-2026-23942
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Erlang OTP (ssh_sftpd module) allows Path Traversal.

This vulnerability is associated with program files lib/ssh/src/ssh_sftpd.erl and program routines ssh_sftpd:is_within_root/2.

The SFTP server uses string prefix matching via lists:prefix/2 rather than proper path component validation when checking if a path is within the configured root directory. This allows authenticated users to access sibling directories that share a common name prefix with the configured root directory. For example, if root is set to /home/user1, paths like /home/user10 or /home/user1_backup would incorrectly be considered within the root.

This issue affects OTP from OTP 17.0 before OTP 28.4.1, OTP 27.3.4.9 and OTP 26.2.5.18, corresponding to ssh from 3.0.1 before 5.5.1, 5.2.11.6 and 5.1.4.14.

🎖@cveNotify

🚨 CVE-2026-23943
Improper Handling of Highly Compressed Data (Compression Bomb) vulnerability in Erlang OTP ssh (ssh_transport modules) allows Denial of Service via Resource Depletion.

The SSH transport layer advertises legacy zlib compression by default and inflates attacker-controlled payloads pre-authentication without any size limit, enabling reliable memory exhaustion DoS.

Two compression algorithms are affected:

* zlib: Activates immediately after key exchange, enabling unauthenticated attacks
* zlib@openssh.com: Activates post-authentication, enabling authenticated attacks

Each SSH packet can decompress ~255 MB from 256 KB of wire data (1029:1 amplification ratio). Multiple packets can rapidly exhaust available memory, causing OOM kills in memory-constrained environments.

This vulnerability is associated with program files lib/ssh/src/ssh_transport.erl and program routines ssh_transport:decompress/2, ssh_transport:handle_packet_part/4.

This issue affects OTP from OTP 17.0 before OTP 28.4.1, OTP 27.3.4.9 and OTP 26.2.5.18, corresponding to ssh from 3.0.1 before 5.5.1, 5.2.11.6 and 5.1.4.14.

🎖@cveNotify

🚨 CVE-2026-28809
XML External Entity (XXE) vulnerability in esaml (and its forks) allows an attacker to cause the system to read local files and incorporate their contents into processed SAML documents, and potentially perform SSRF via crafted SAML messages.

esaml parses attacker-controlled SAML messages using xmerl_scan:string/2 before signature verification without disabling XML entity expansion. On Erlang/OTP versions before 27, Xmerl allows entities by default, enabling pre-signature XXE attacks. An attacker can cause the host to read local files (e.g., Kubernetes-mounted secrets) into the SAML document. If the attacker is not a trusted SAML SP, signature verification will fail and the document is discarded, but file contents may still be exposed through logs or error messages.

This issue affects all versions of esaml, including forks by arekinath, handnot2, and dropbox. Users running on Erlang/OTP 27 or later are not affected due to Xmerl defaulting to entities disabled.

🎖@cveNotify

🚨 CVE-2026-23451
In the Linux kernel, the following vulnerability has been resolved:

bonding: prevent potential infinite loop in bond_header_parse()

bond_header_parse() can loop if a stack of two bonding devices is setup,
because skb->dev always points to the hierarchy top.

Add new "const struct net_device *dev" parameter to
(struct header_ops)->parse() method to make sure the recursion
is bounded, and that the final leaf parse method is called.

🎖@cveNotify

🚨 CVE-2026-28810
Generation of Predictable Numbers or Identifiers vulnerability in Erlang/OTP kernel (inet_res, inet_db modules) allows DNS Cache Poisoning.

The built-in DNS resolver (inet_res) uses a sequential, process-global 16-bit transaction ID for UDP queries and does not implement source port randomization. Response validation relies almost entirely on this ID, making DNS cache poisoning practical for an attacker who can observe one query or predict the next ID. This conflicts with RFC 5452 recommendations for mitigating forged DNS answers.

inet_res is intended for use in trusted network environments and with trusted recursive resolvers. Earlier documentation did not clearly state this deployment assumption, which could lead users to deploy the resolver in environments where spoofed DNS responses are possible.

This vulnerability is associated with program files lib/kernel/src/inet_db.erl and lib/kernel/src/inet_res.erl.

This issue affects OTP from OTP 17.0 before OTP 28.4.2, OTP 27.3.4.10 and OTP 26.2.5.19, corresponding to kernel from 3.0 before 10.6.2, 10.2.7.4 and 9.2.4.11.

🎖@cveNotify

🚨 CVE-2026-28808
Incorrect Authorization vulnerability in Erlang OTP (inets modules) allows unauthenticated access to CGI scripts protected by directory rules when served via script_alias.

When script_alias maps a URL prefix to a directory outside DocumentRoot, mod_auth evaluates directory-based access controls against the DocumentRoot-relative path while mod_cgi executes the script at the ScriptAlias-resolved path. This path mismatch allows unauthenticated access to CGI scripts that directory rules were meant to protect.

This vulnerability is associated with program files lib/inets/src/http_server/mod_alias.erl, lib/inets/src/http_server/mod_auth.erl, and lib/inets/src/http_server/mod_cgi.erl.

This issue affects OTP from OTP 17.0 before OTP 28.4.2, OTP 27.3.4.10 and OTP 26.2.5.19, corresponding to inets from 5.10 before 9.6.2, 9.3.2.4 and 9.1.0.6.

🎖@cveNotify

🚨 CVE-2026-32144
Improper Certificate Validation vulnerability in Erlang OTP public_key (pubkey_ocsp module) allows OCSP designated-responder authorization bypass via missing signature verification.

The OCSP response validation in public_key:pkix_ocsp_validate/5 does not verify that a CA-designated responder certificate was cryptographically signed by the issuing CA. Instead, it only checks that the responder certificate's issuer name matches the CA's subject name and that the certificate has the OCSPSigning extended key usage. An attacker who can intercept or control OCSP responses can create a self-signed certificate with a matching issuer name and the OCSPSigning EKU, and use it to forge OCSP responses that mark revoked certificates as valid.

This affects SSL/TLS clients using OCSP stapling, which may accept connections to servers with revoked certificates, potentially transmitting sensitive data to compromised servers. Applications using the public_key:pkix_ocsp_validate/5 API directly are also affected, with impact depending on usage context.

This vulnerability is associated with program files lib/public_key/src/pubkey_ocsp.erl and program routines pubkey_ocsp:is_authorized_responder/3.

This issue affects OTP from OTP 27.0 before OTP 28.4.2 and OTP 27.3.4.10, corresponding to public_key from 1.16 before 1.20.3 and 1.17.1.2, and ssl from 11.2 before 11.5.4 and 11.2.12.7.

🎖@cveNotify

🚨 CVE-2026-32147
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Erlang OTP ssh (ssh_sftpd module) allows an authenticated SFTP user to modify file attributes outside the configured chroot directory.

The SFTP daemon (ssh_sftpd) stores the raw, user-supplied path in file handles instead of the chroot-resolved path. When SSH_FXP_FSETSTAT is issued on such a handle, file attributes (permissions, ownership, timestamps) are modified on the real filesystem path, bypassing the root directory boundary entirely.

Any authenticated SFTP user on a server configured with the root option can modify file attributes of files outside the intended chroot boundary. The prerequisite is that a target file must exist on the real filesystem at the same relative path. Note that this vulnerability only allows modification of file attributes; file contents cannot be read or altered through this attack vector.

If the SSH daemon runs as root, this enables direct privilege escalation: an attacker can set the setuid bit on any binary, change ownership of sensitive files, or make system configuration world-writable.

This vulnerability is associated with program files lib/ssh/src/ssh_sftpd.erl and program routines ssh_sftpd:do_open/4 and ssh_sftpd:handle_op/4.

This issue affects OTP from OTP 17.0 before OTP 28.4.3, OTP 27.3.4.11 and OTP 26.2.5.20, corresponding to ssh from 3.0.1 before 5.5.3, 5.2.11.7 and 5.1.4.15.

🎖@cveNotify

🚨 CVE-2026-31502
In the Linux kernel, the following vulnerability has been resolved:

team: fix header_ops type confusion with non-Ethernet ports

Similar to commit 950803f72547 ("bonding: fix type confusion in
bond_setup_by_slave()") team has the same class of header_ops type
confusion.

For non-Ethernet ports, team_setup_by_port() copies port_dev->header_ops
directly. When the team device later calls dev_hard_header() or
dev_parse_header(), these callbacks can run with the team net_device
instead of the real lower device, so netdev_priv(dev) is interpreted as
the wrong private type and can crash.

The syzbot report shows a crash in bond_header_create(), but the root
cause is in team: the topology is gre -> bond -> team, and team calls
the inherited header_ops with its own net_device instead of the lower
device, so bond_header_create() receives a team device and interprets
netdev_priv() as bonding private data, causing a type confusion crash.

Fix this by introducing team header_ops wrappers for create/parse,
selecting a team port under RCU, and calling the lower device callbacks
with port->dev, so each callback always sees the correct net_device
context.

Also pass the selected lower device to the lower parse callback, so
recursion is bounded in stacked non-Ethernet topologies and parse
callbacks always run with the correct device context.

🎖@cveNotify

🚨 CVE-2026-31610
In the Linux kernel, the following vulnerability has been resolved:

ksmbd: fix mechToken leak when SPNEGO decode fails after token alloc

The kernel ASN.1 BER decoder calls action callbacks incrementally as it
walks the input. When ksmbd_decode_negTokenInit() reaches the mechToken
[2] OCTET STRING element, ksmbd_neg_token_alloc() allocates
conn->mechToken immediately via kmemdup_nul(). If a later element in
the same blob is malformed, then the decoder will return nonzero after
the allocation is already live. This could happen if mechListMIC [3]
overrunse the enclosing SEQUENCE.

decode_negotiation_token() then sets conn->use_spnego = false because
both the negTokenInit and negTokenTarg grammars failed. The cleanup at
the bottom of smb2_sess_setup() is gated on use_spnego:

if (conn->use_spnego && conn->mechToken) {
kfree(conn->mechToken);
conn->mechToken = NULL;
}

so the kfree is skipped, causing the mechToken to never be freed.

This codepath is reachable pre-authentication, so untrusted clients can
cause slow memory leaks on a server without even being properly
authenticated.

Fix this up by not checking check for use_spnego, as it's not required,
so the memory will always be properly freed. At the same time, always
free the memory in ksmbd_conn_free() incase some other failure path
forgot to free it.

🎖@cveNotify

🚨 CVE-2026-31703
In the Linux kernel, the following vulnerability has been resolved:

writeback: Fix use after free in inode_switch_wbs_work_fn()

inode_switch_wbs_work_fn() has a loop like:

wb_get(new_wb);
while (1) {
list = llist_del_all(&new_wb->switch_wbs_ctxs);
/* Nothing to do? */
if (!list)
break;
... process the items ...
}

Now adding of items to the list looks like:

wb_queue_isw()
if (llist_add(&isw->list, &wb->switch_wbs_ctxs))
queue_work(isw_wq, &wb->switch_work);

Because inode_switch_wbs_work_fn() loops when processing isw items, it
can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is
empty. This is a problem because in that case wb can get freed (no isw
items -> no wb reference) while the work is still pending causing
use-after-free issues.

We cannot just fix this by cancelling work when freeing wb because that
could still trigger problematic 0 -> 1 transitions on wb refcount due to
wb_get() in inode_switch_wbs_work_fn(). It could be all handled with
more careful code but that seems unnecessarily complex so let's avoid
that until it is proven that the looping actually brings practical
benefit. Just remove the loop from inode_switch_wbs_work_fn() instead.
That way when wb_queue_isw() queues work, we are guaranteed we have
added the first item to wb->switch_wbs_ctxs and nobody is going to
remove it (and drop the wb reference it holds) until the queued work
runs.

🎖@cveNotify

🚨 CVE-2026-39805
Inconsistent Interpretation of HTTP Requests vulnerability in mtrudel bandit allows HTTP request smuggling via duplicate Content-Length headers.

'Elixir.Bandit.Headers':get_content_length/1 in lib/bandit/headers.ex uses List.keyfind/3, which returns only the first matching header. When a request contains two Content-Length headers with different values, Bandit silently accepts it, uses the first value to read the body, and dispatches the remaining bytes as a second pipelined request on the same keep-alive connection. RFC 9112 §6.3 requires recipients to treat this as an unrecoverable framing error.

When Bandit sits behind a proxy that picks the last Content-Length value and forwards the request rather than rejecting it, an unauthenticated attacker can smuggle requests past edge WAF rules, path-based ACLs, rate limiting, and audit logging.

This issue affects bandit: before 1.11.0.

🎖@cveNotify

🚨 CVE-2026-43119
In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: hci_sync: annotate data-races around hdev->req_status

__hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock:

hdev->req_status = HCI_REQ_PEND;

However, several other functions read or write hdev->req_status without
holding any lock:

- hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue)
- hci_cmd_sync_complete() reads/writes from HCI event completion
- hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write
- hci_abort_conn() reads in connection abort path

Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while
hci_send_cmd_sync() runs on hdev->workqueue, these are different
workqueues that can execute concurrently on different CPUs. The plain
C accesses constitute a data race.

Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses
to hdev->req_status to prevent potential compiler optimizations that
could affect correctness (e.g., load fusing in the wait_event
condition or store reordering).

🎖@cveNotify

🚨 CVE-2025-71289
In the Linux kernel, the following vulnerability has been resolved:

fs/ntfs3: handle attr_set_size() errors when truncating files

If attr_set_size() fails while truncating down, the error is silently
ignored and the inode may be left in an inconsistent state.

🎖@cveNotify

🚨 CVE-2026-43456
In the Linux kernel, the following vulnerability has been resolved:

bonding: fix type confusion in bond_setup_by_slave()

kernel BUG at net/core/skbuff.c:2306!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:pskb_expand_head+0xa08/0xfe0 net/core/skbuff.c:2306
RSP: 0018:ffffc90004aff760 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88807e3c8780 RCX: ffffffff89593e0e
RDX: ffff88807b7c4900 RSI: ffffffff89594747 RDI: ffff88807b7c4900
RBP: 0000000000000820 R08: 0000000000000005 R09: 0000000000000000
R10: 00000000961a63e0 R11: 0000000000000000 R12: ffff88807e3c8780
R13: 00000000961a6560 R14: dffffc0000000000 R15: 00000000961a63e0
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe1a0ed8df0 CR3: 000000002d816000 CR4: 00000000003526f0
Call Trace:
<TASK>
ipgre_header+0xdd/0x540 net/ipv4/ip_gre.c:900
dev_hard_header include/linux/netdevice.h:3439 [inline]
packet_snd net/packet/af_packet.c:3028 [inline]
packet_sendmsg+0x3ae5/0x53c0 net/packet/af_packet.c:3108
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa54/0xc30 net/socket.c:2592
___sys_sendmsg+0x190/0x1e0 net/socket.c:2646
__sys_sendmsg+0x170/0x220 net/socket.c:2678
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x106/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe1a0e6c1a9

When a non-Ethernet device (e.g. GRE tunnel) is enslaved to a bond,
bond_setup_by_slave() directly copies the slave's header_ops to the
bond device:

bond_dev->header_ops = slave_dev->header_ops;

This causes a type confusion when dev_hard_header() is later called
on the bond device. Functions like ipgre_header(), ip6gre_header(),all use
netdev_priv(dev) to access their device-specific private data. When
called with the bond device, netdev_priv() returns the bond's private
data (struct bonding) instead of the expected type (e.g. struct
ip_tunnel), leading to garbage values being read and kernel crashes.

Fix this by introducing bond_header_ops with wrapper functions that
delegate to the active slave's header_ops using the slave's own
device. This ensures netdev_priv() in the slave's header functions
always receives the correct device.

The fix is placed in the bonding driver rather than individual device
drivers, as the root cause is bond blindly inheriting header_ops from
the slave without considering that these callbacks expect a specific
netdev_priv() layout.

The type confusion can be observed by adding a printk in
ipgre_header() and running the following commands:

ip link add dummy0 type dummy
ip addr add 10.0.0.1/24 dev dummy0
ip link set dummy0 up
ip link add gre1 type gre local 10.0.0.1
ip link add bond1 type bond mode active-backup
ip link set gre1 master bond1
ip link set gre1 up
ip link set bond1 up
ip addr add fe80::1/64 dev bond1

🎖@cveNotify