🚨 CVE-2026-53333
In the Linux kernel, the following vulnerability has been resolved:
mm/mincore: handle non-swap entries before !CONFIG_SWAP guard
mincore_swap() also fields migration/hwpoison entries (and shmem
swapin-error entries), which can exist on !CONFIG_SWAP builds when
CONFIG_MIGRATION or CONFIG_MEMORY_FAILURE is enabled. The
!IS_ENABLED(CONFIG_SWAP) guard ran before the non-swap-entry early return,
so mincore_pte_range() can spuriously WARN and report these pages
nonresident on !CONFIG_SWAP kernels.
Move the guard below the non-swap-entry check so only true swap entries
trip the WARN, and migration/hwpoison entries take the existing "uptodate
/ non-shmem" path.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
mm/mincore: handle non-swap entries before !CONFIG_SWAP guard
mincore_swap() also fields migration/hwpoison entries (and shmem
swapin-error entries), which can exist on !CONFIG_SWAP builds when
CONFIG_MIGRATION or CONFIG_MEMORY_FAILURE is enabled. The
!IS_ENABLED(CONFIG_SWAP) guard ran before the non-swap-entry early return,
so mincore_pte_range() can spuriously WARN and report these pages
nonresident on !CONFIG_SWAP kernels.
Move the guard below the non-swap-entry check so only true swap entries
trip the WARN, and migration/hwpoison entries take the existing "uptodate
/ non-shmem" path.
🎖@cveNotify
🚨 CVE-2026-53335
In the Linux kernel, the following vulnerability has been resolved:
mm/damon/lru_sort: handle ctx allocation failure
DAMON_LRU_SORT allocates the damon_ctx object for its kdamond in its init
function. damon_lru_sort_enabled_store() wrongly assumes the allocation
will always succeed once tried. If the damon_ctx allocation was failed,
therefore, code execution reaches to damon_commit_ctx() while 'ctx' is
NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the
NULL dereference by returning -ENOMEM if 'ctx' is NULL.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
mm/damon/lru_sort: handle ctx allocation failure
DAMON_LRU_SORT allocates the damon_ctx object for its kdamond in its init
function. damon_lru_sort_enabled_store() wrongly assumes the allocation
will always succeed once tried. If the damon_ctx allocation was failed,
therefore, code execution reaches to damon_commit_ctx() while 'ctx' is
NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the
NULL dereference by returning -ENOMEM if 'ctx' is NULL.
🎖@cveNotify
🚨 CVE-2026-53336
In the Linux kernel, the following vulnerability has been resolved:
nvmem: layouts: onie-tlv: fix hang on unknown types
The EEPROM on my board has a vendor specific entry of type 0x41. When
stumbling upon that, this driver hangs in an endless loop.
Fix it by keep incrementing the offset on unknown entries, so the loop
will eventually stop.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
nvmem: layouts: onie-tlv: fix hang on unknown types
The EEPROM on my board has a vendor specific entry of type 0x41. When
stumbling upon that, this driver hangs in an endless loop.
Fix it by keep incrementing the offset on unknown entries, so the loop
will eventually stop.
🎖@cveNotify
🚨 CVE-2026-53337
In the Linux kernel, the following vulnerability has been resolved:
net: bonding: fix NULL pointer dereference in bond_do_ioctl()
In bond_do_ioctl(), slave_dev is obtained via __dev_get_by_name() which
can return NULL if the requested interface name does not exist. However,
the subsequent slave_dbg() call is placed before the NULL check:
slave_dev = __dev_get_by_name(net, ifr->ifr_slave);
slave_dbg(bond_dev, slave_dev, "slave_dev=%p:\n", slave_dev); //here
if (!slave_dev)
return -ENODEV;
The slave_dbg() macro expands to netdev_dbg(bond_dev, "(slave %s): " fmt,
(slave_dev)->name, ...) which unconditionally dereferences slave_dev->name
before the NULL check is performed. This results in a NULL pointer
dereference kernel oops when a user calls bonding ioctl (e.g.
SIOCBONDENSLAVE, SIOCBONDRELEASE, etc.) with a non-existent slave
interface name.
This is reachable from userspace via the bonding ioctl interface with
CAP_NET_ADMIN capability, making it a potential local denial-of-service
vector.
Fix by moving the slave_dbg() call after the NULL check.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net: bonding: fix NULL pointer dereference in bond_do_ioctl()
In bond_do_ioctl(), slave_dev is obtained via __dev_get_by_name() which
can return NULL if the requested interface name does not exist. However,
the subsequent slave_dbg() call is placed before the NULL check:
slave_dev = __dev_get_by_name(net, ifr->ifr_slave);
slave_dbg(bond_dev, slave_dev, "slave_dev=%p:\n", slave_dev); //here
if (!slave_dev)
return -ENODEV;
The slave_dbg() macro expands to netdev_dbg(bond_dev, "(slave %s): " fmt,
(slave_dev)->name, ...) which unconditionally dereferences slave_dev->name
before the NULL check is performed. This results in a NULL pointer
dereference kernel oops when a user calls bonding ioctl (e.g.
SIOCBONDENSLAVE, SIOCBONDRELEASE, etc.) with a non-existent slave
interface name.
This is reachable from userspace via the bonding ioctl interface with
CAP_NET_ADMIN capability, making it a potential local denial-of-service
vector.
Fix by moving the slave_dbg() call after the NULL check.
🎖@cveNotify
🚨 CVE-2026-53338
In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Add NULL check for of_reserved_mem_lookup() in airoha_qdma_init_hfwd_queues()
of_reserved_mem_lookup() may return NULL if the reserved memory region
referenced by the "memory-region" phandle is not found in the reserved
memory table (e.g. due to a misconfigured DTS or a removed
memory-region node). The current code dereferences the returned
pointer without checking for NULL, leading to a kernel NULL pointer
dereference at the following lines:
dma_addr = rmem->base; // line 1156
num_desc = div_u64(rmem->size, buf_size); // line 1160
Add a NULL check after of_reserved_mem_lookup() and return -ENODEV if
the lookup fails, which is consistent with the existing error handling
for of_parse_phandle() failure in the same code block.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Add NULL check for of_reserved_mem_lookup() in airoha_qdma_init_hfwd_queues()
of_reserved_mem_lookup() may return NULL if the reserved memory region
referenced by the "memory-region" phandle is not found in the reserved
memory table (e.g. due to a misconfigured DTS or a removed
memory-region node). The current code dereferences the returned
pointer without checking for NULL, leading to a kernel NULL pointer
dereference at the following lines:
dma_addr = rmem->base; // line 1156
num_desc = div_u64(rmem->size, buf_size); // line 1160
Add a NULL check after of_reserved_mem_lookup() and return -ENODEV if
the lookup fails, which is consistent with the existing error handling
for of_parse_phandle() failure in the same code block.
🎖@cveNotify
🚨 CVE-2026-53339
In the Linux kernel, the following vulnerability has been resolved:
i2c: qcom-cci: Fix NULL pointer dereference in cci_remove()
On all modern platforms Qualcomm CCI controller provides two I2C masters,
and on particular boards only one I2C master may be initialized, and in
such cases the device unbinding or driver removal causes a NULL pointer
dereference, because cci_halt() is called for all two I2C masters, but
a completion is initialized only for the single enabled master:
% rmmod i2c-qcom-cci
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
<snip>
Call trace:
__wait_for_common+0x194/0x1a8 (P)
wait_for_completion_timeout+0x20/0x2c
cci_remove+0xc4/0x138 [i2c_qcom_cci]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
device_release_driver_internal+0x1c8/0x224
driver_detach+0x50/0x98
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
platform_driver_unregister+0x14/0x20
qcom_cci_driver_exit+0x18/0x1008 [i2c_qcom_cci]
....
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
i2c: qcom-cci: Fix NULL pointer dereference in cci_remove()
On all modern platforms Qualcomm CCI controller provides two I2C masters,
and on particular boards only one I2C master may be initialized, and in
such cases the device unbinding or driver removal causes a NULL pointer
dereference, because cci_halt() is called for all two I2C masters, but
a completion is initialized only for the single enabled master:
% rmmod i2c-qcom-cci
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
<snip>
Call trace:
__wait_for_common+0x194/0x1a8 (P)
wait_for_completion_timeout+0x20/0x2c
cci_remove+0xc4/0x138 [i2c_qcom_cci]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
device_release_driver_internal+0x1c8/0x224
driver_detach+0x50/0x98
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
platform_driver_unregister+0x14/0x20
qcom_cci_driver_exit+0x18/0x1008 [i2c_qcom_cci]
....
🎖@cveNotify
🚨 CVE-2026-53340
In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix clock and pinctrl state inconsistency in runtime PM
In i2c_imx_runtime_suspend(), the clock is disabled before switching
the pinctrl state to sleep. If pinctrl_pm_select_sleep_state() fails,
the runtime suspend is aborted but the clock remains disabled, causing
a system crash when the hardware is subsequently accessed.
Fix this by switching the pinctrl state before disabling the clock so
that a pinctrl failure leaves the clock enabled and the hardware
accessible.
In i2c_imx_runtime_resume(), restore the pinctrl state back to sleep
if clk_enable() fails to keep the consistent.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix clock and pinctrl state inconsistency in runtime PM
In i2c_imx_runtime_suspend(), the clock is disabled before switching
the pinctrl state to sleep. If pinctrl_pm_select_sleep_state() fails,
the runtime suspend is aborted but the clock remains disabled, causing
a system crash when the hardware is subsequently accessed.
Fix this by switching the pinctrl state before disabling the clock so
that a pinctrl failure leaves the clock enabled and the hardware
accessible.
In i2c_imx_runtime_resume(), restore the pinctrl state back to sleep
if clk_enable() fails to keep the consistent.
🎖@cveNotify
🚨 CVE-2026-53341
In the Linux kernel, the following vulnerability has been resolved:
fhandle: fix UAF due to unlocked ->mnt_ns read in may_decode_fh()
may_decode_fh() accesses mount::mnt_ns without holding any locks; that
means the mount can concurrently be unmounted, and the mnt_namespace can
concurrently be freed after an RCU grace period.
This race can happens as follows, assuming that the mount point was
created by open_tree(..., OPEN_TREE_CLONE):
thread 1 thread 2 RCU
__do_sys_open_by_handle_at
do_handle_open
handle_to_path
may_decode_fh
is_mounted
[mount::mnt_ns access]
[mount::mnt_ns access]
__do_sys_close
fput_close_sync
__fput
dissolve_on_fput
umount_tree
class_namespace_excl_destructor
namespace_unlock
free_mnt_ns
mnt_ns_tree_remove
call_rcu(mnt_ns_release_rcu)
mnt_ns_release_rcu
mnt_ns_release
kfree
[mnt_namespace::user_ns access] **UAF**
Fix it by taking rcu_read_lock() around the mount::mnt_ns access, like
in __prepend_path().
Additionally, document the semantics of mount::mnt_ns, and use WRITE_ONCE()
for writers that can race with lockless readers.
This bug is unreachable unless one of the following is set:
- CONFIG_PREEMPTION
- CONFIG_RCU_STRICT_GRACE_PERIOD
because it requires an RCU grace period to happen during a syscall without
an explicit preemption.
This doesn't seem to have interesting security impact; worst-case, it could
leak the result of an integer comparison to userspace (from the level
check in cap_capable()), cause an endless loop, or crash the kernel by
dereferencing an invalid address.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
fhandle: fix UAF due to unlocked ->mnt_ns read in may_decode_fh()
may_decode_fh() accesses mount::mnt_ns without holding any locks; that
means the mount can concurrently be unmounted, and the mnt_namespace can
concurrently be freed after an RCU grace period.
This race can happens as follows, assuming that the mount point was
created by open_tree(..., OPEN_TREE_CLONE):
thread 1 thread 2 RCU
__do_sys_open_by_handle_at
do_handle_open
handle_to_path
may_decode_fh
is_mounted
[mount::mnt_ns access]
[mount::mnt_ns access]
__do_sys_close
fput_close_sync
__fput
dissolve_on_fput
umount_tree
class_namespace_excl_destructor
namespace_unlock
free_mnt_ns
mnt_ns_tree_remove
call_rcu(mnt_ns_release_rcu)
mnt_ns_release_rcu
mnt_ns_release
kfree
[mnt_namespace::user_ns access] **UAF**
Fix it by taking rcu_read_lock() around the mount::mnt_ns access, like
in __prepend_path().
Additionally, document the semantics of mount::mnt_ns, and use WRITE_ONCE()
for writers that can race with lockless readers.
This bug is unreachable unless one of the following is set:
- CONFIG_PREEMPTION
- CONFIG_RCU_STRICT_GRACE_PERIOD
because it requires an RCU grace period to happen during a syscall without
an explicit preemption.
This doesn't seem to have interesting security impact; worst-case, it could
leak the result of an integer comparison to userspace (from the level
check in cap_capable()), cause an endless loop, or crash the kernel by
dereferencing an invalid address.
🎖@cveNotify
🚨 CVE-2026-53342
In the Linux kernel, the following vulnerability has been resolved:
arm64: mm: call pagetable dtor when freeing hot-removed page tables
Since 5e8eb9aeeda3 ("arm64: mm: always call PTE/PMD ctor in
__create_pgd_mapping()") page-table allocation on ARM64 always calls
pagetable_{pte,pmd,pud,p4d}_ctor(). This sets the page_type to
PGTY_table, increments NR_PAGETABLE and possible allocates a PTL. However
the matching pagetable_dtor() calls were never added.
With DEBUG_VM enabled on kernel versions prior to v6.17 without
2dfcd1608f3a9 ("mm/page_alloc: let page freeing clear any set page type")
this leads to the following warning when freeing these pages due to
page->page_type sharing page->_mapcount:
BUG: Bad page state in process ... pfn:284fbb
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x284fbb
flags: 0x17fffc000000000(node=0|zone=2|lastcpupid=0x1ffff)
page_type: f2(table)
page dumped because: nonzero mapcount
Call trace:
bad_page+0x13c/0x160
__free_frozen_pages+0x6cc/0x860
___free_pages+0xf4/0x180
free_pages+0x54/0x80
free_hotplug_page_range.part.0+0x58/0x90
free_empty_tables+0x438/0x500
__remove_pgd_mapping.constprop.0+0x60/0xa8
arch_remove_memory+0x48/0x80
try_remove_memory+0x158/0x1d8
offline_and_remove_memory+0x138/0x180
It can also lead to leaking the ptl allocation if ALLOC_SPLIT_PTLOCKS is
defined and incorrect NR_PAGETABLE stats. Fix this by calling
pagetable_dtor() in free_hotplug_pgtable_page() prior to freeing the page
to undo the effects of calling pagetable_*_ctor().
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
arm64: mm: call pagetable dtor when freeing hot-removed page tables
Since 5e8eb9aeeda3 ("arm64: mm: always call PTE/PMD ctor in
__create_pgd_mapping()") page-table allocation on ARM64 always calls
pagetable_{pte,pmd,pud,p4d}_ctor(). This sets the page_type to
PGTY_table, increments NR_PAGETABLE and possible allocates a PTL. However
the matching pagetable_dtor() calls were never added.
With DEBUG_VM enabled on kernel versions prior to v6.17 without
2dfcd1608f3a9 ("mm/page_alloc: let page freeing clear any set page type")
this leads to the following warning when freeing these pages due to
page->page_type sharing page->_mapcount:
BUG: Bad page state in process ... pfn:284fbb
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x284fbb
flags: 0x17fffc000000000(node=0|zone=2|lastcpupid=0x1ffff)
page_type: f2(table)
page dumped because: nonzero mapcount
Call trace:
bad_page+0x13c/0x160
__free_frozen_pages+0x6cc/0x860
___free_pages+0xf4/0x180
free_pages+0x54/0x80
free_hotplug_page_range.part.0+0x58/0x90
free_empty_tables+0x438/0x500
__remove_pgd_mapping.constprop.0+0x60/0xa8
arch_remove_memory+0x48/0x80
try_remove_memory+0x158/0x1d8
offline_and_remove_memory+0x138/0x180
It can also lead to leaking the ptl allocation if ALLOC_SPLIT_PTLOCKS is
defined and incorrect NR_PAGETABLE stats. Fix this by calling
pagetable_dtor() in free_hotplug_pgtable_page() prior to freeing the page
to undo the effects of calling pagetable_*_ctor().
🎖@cveNotify
🚨 CVE-2026-53343
In the Linux kernel, the following vulnerability has been resolved:
ARM: 9475/1: entry: use byte load for KASAN VMAP stack shadow
Commit 44e9a3bb76e5 ("ARM: 9430/1: entry: Do a dummy read from
VMAP shadow") added a dummy read from the KASAN VMAP stack shadow in
__switch_to(). The read uses ldr, but the KASAN shadow address is
byte-granular and is not guaranteed to be word aligned.
ARMv5 faults unaligned word loads. With CONFIG_KASAN_VMALLOC and
CONFIG_VMAP_STACK enabled, ARM926/VersatilePB crashes in __switch_to()
with an alignment exception before reaching init.
Use ldrb for the dummy shadow access. The code only needs to fault in the
shadow mapping if the stack shadow is missing, so a byte load is sufficient
and matches the granularity of KASAN shadow memory.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ARM: 9475/1: entry: use byte load for KASAN VMAP stack shadow
Commit 44e9a3bb76e5 ("ARM: 9430/1: entry: Do a dummy read from
VMAP shadow") added a dummy read from the KASAN VMAP stack shadow in
__switch_to(). The read uses ldr, but the KASAN shadow address is
byte-granular and is not guaranteed to be word aligned.
ARMv5 faults unaligned word loads. With CONFIG_KASAN_VMALLOC and
CONFIG_VMAP_STACK enabled, ARM926/VersatilePB crashes in __switch_to()
with an alignment exception before reaching init.
Use ldrb for the dummy shadow access. The code only needs to fault in the
shadow mapping if the stack shadow is missing, so a byte load is sufficient
and matches the granularity of KASAN shadow memory.
🎖@cveNotify
🚨 CVE-2026-53344
In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mcp23s08: Initialize mcp->dev and mcp->addr before regmap init
Regmap initialization triggers regcache_maple_populate() which attempts
SPI read to populate cache. SPI read requires mcp->dev and mcp->addr to
be set, without them, NULL pointer dereference occurs during probe.
Move initialization before mcp23s08_spi_regmap_init() call.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mcp23s08: Initialize mcp->dev and mcp->addr before regmap init
Regmap initialization triggers regcache_maple_populate() which attempts
SPI read to populate cache. SPI read requires mcp->dev and mcp->addr to
be set, without them, NULL pointer dereference occurs during probe.
Move initialization before mcp23s08_spi_regmap_init() call.
🎖@cveNotify
🚨 CVE-2026-64611
A flaw was found in libcupsfilters. The cfIEEE1284NormalizeMakeModel() function enters an infinite loop when processing a printer-advertised IEEE-1284 device ID with an empty model field, causing sustained CPU consumption. A network-adjacent attacker could exploit this by broadcasting a specially crafted printer advertisement, leading to denial of service.
🎖@cveNotify
A flaw was found in libcupsfilters. The cfIEEE1284NormalizeMakeModel() function enters an infinite loop when processing a printer-advertised IEEE-1284 device ID with an empty model field, causing sustained CPU consumption. A network-adjacent attacker could exploit this by broadcasting a specially crafted printer advertisement, leading to denial of service.
🎖@cveNotify
🚨 CVE-2026-10697
Improper Authentication vulnerability in Progress MOVEit Transfer.
This issue affects MOVEit Transfer: before 2025.1.5, from 2026.0.0 before 2026.0.3.
🎖@cveNotify
Improper Authentication vulnerability in Progress MOVEit Transfer.
This issue affects MOVEit Transfer: before 2025.1.5, from 2026.0.0 before 2026.0.3.
🎖@cveNotify
Progress
Fixed Issues in 2026.0.3
This section outlines issues tracked and fixed by the MOVEit product team for the 2026.0.3 Service Pack. Note: See the What's New section for a broader summary of features and improvements.
🚨 CVE-2026-15630
A non-global organization admin in one tenant can bypass tenant boundaries to delete, create, or modify resources in any other tenant by exploiting a mismatch between authorization (based on ?id=) and action (based on request body).
🎖@cveNotify
A non-global organization admin in one tenant can bypass tenant boundaries to delete, create, or modify resources in any other tenant by exploiting a mismatch between authorization (based on ?id=) and action (based on request body).
🎖@cveNotify
Voke Cyber
CVE-2026-15630 — Cross-Tenant Authorization Bypass in Casdoor IAM (CVSS 9.6 Critical)
CVSS 9.6 cross-tenant authorization bypass in Casdoor. The authz filter checks the URL ?id= while the controller acts on the body, so any org admin can reach every other tenant. No fix. Reported by Voke Cyber.
🚨 CVE-2026-15966
Permissive cross-domain security policy with untrusted domains vulnerability in Progress MOVEit Transfer.
This issue affects MOVEit Transfer: before 2025.1.5, from 2026.0.0 before 2026.0.3.
🎖@cveNotify
Permissive cross-domain security policy with untrusted domains vulnerability in Progress MOVEit Transfer.
This issue affects MOVEit Transfer: before 2025.1.5, from 2026.0.0 before 2026.0.3.
🎖@cveNotify
Progress
Fixed Issues in 2026.0.3
This section outlines issues tracked and fixed by the MOVEit product team for the 2026.0.3 Service Pack. Note: See the What's New section for a broader summary of features and improvements.
🚨 CVE-2026-15967
Insufficient session expiration vulnerability in Progress MOVEit Transfer.
This issue affects MOVEit Transfer: before 2025.1.5, from 2026.0.0 before 2026.0.3.
🎖@cveNotify
Insufficient session expiration vulnerability in Progress MOVEit Transfer.
This issue affects MOVEit Transfer: before 2025.1.5, from 2026.0.0 before 2026.0.3.
🎖@cveNotify
Progress
Fixed Issues in 2026.0.3
This section outlines issues tracked and fixed by the MOVEit product team for the 2026.0.3 Service Pack. Note: See the What's New section for a broader summary of features and improvements.
🚨 CVE-2026-15968
Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Progress MOVEit Transfer.
This issue affects MOVEit Transfer: before 2025.1.5, from 2026.0.0 before 2026.0.3.
🎖@cveNotify
Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Progress MOVEit Transfer.
This issue affects MOVEit Transfer: before 2025.1.5, from 2026.0.0 before 2026.0.3.
🎖@cveNotify
Progress
Fixed Issues in 2026.0.3
This section outlines issues tracked and fixed by the MOVEit product team for the 2026.0.3 Service Pack. Note: See the What's New section for a broader summary of features and improvements.
🚨 CVE-2026-15981
The SAML Single Sign On – SSO Login plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 5.4.4. This is due to the mo_saml_validate_signature() function performing a loose boolean check on the raw tri-state integer returned by PHP's openssl_verify(), causing an error return value of -1 to be evaluated as truthy and therefore treated as a successful signature verification. This makes it possible for unauthenticated attackers to log in as any existing WordPress user, including administrators, by submitting a crafted SAMLResponse containing an attacker-controlled NameID and a deliberately malformed signature value that triggers an OpenSSL processing error — bypassing verification entirely and resulting in wp_set_auth_cookie() being called for the targeted account.
🎖@cveNotify
The SAML Single Sign On – SSO Login plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 5.4.4. This is due to the mo_saml_validate_signature() function performing a loose boolean check on the raw tri-state integer returned by PHP's openssl_verify(), causing an error return value of -1 to be evaluated as truthy and therefore treated as a successful signature verification. This makes it possible for unauthenticated attackers to log in as any existing WordPress user, including administrators, by submitting a crafted SAMLResponse containing an attacker-controlled NameID and a deliberately malformed signature value that triggers an OpenSSL processing error — bypassing verification entirely and resulting in wp_set_auth_cookie() being called for the targeted account.
🎖@cveNotify
🚨 CVE-2026-16002
The affected product is vulnerable to an Out-of-bounds read, which may allow an attacker to crash the parsing process and cause a denial of service.
🎖@cveNotify
The affected product is vulnerable to an Out-of-bounds read, which may allow an attacker to crash the parsing process and cause a denial of service.
🎖@cveNotify
🚨 CVE-2026-16796
Improper neutralization of argument delimiters in the install_packages() method in AWS Bedrock AgentCore Python SDK before 1.18.1 might allow a remote authenticated user to execute arbitrary commands within the Code Interpreter sandbox via crafted package name arguments.
To mitigate this issue, users should upgrade to the patched version 1.18.1.
🎖@cveNotify
Improper neutralization of argument delimiters in the install_packages() method in AWS Bedrock AgentCore Python SDK before 1.18.1 might allow a remote authenticated user to execute arbitrary commands within the Code Interpreter sandbox via crafted package name arguments.
To mitigate this issue, users should upgrade to the patched version 1.18.1.
🎖@cveNotify
🚨 CVE-2026-21653
Victor SSRF vulnerability in Johnson Controls CCure 9000 and victor application server allows Server Side Request Forgery.
This issue affects CCure 9000 and victor application server: from 2.9 through 3.0.
🎖@cveNotify
Victor SSRF vulnerability in Johnson Controls CCure 9000 and victor application server allows Server Side Request Forgery.
This issue affects CCure 9000 and victor application server: from 2.9 through 3.0.
🎖@cveNotify
Johnsoncontrols
Security Advisories
Check out the listed Security Advisories (SA) about identified security vulnerabilities in Johnson Controls' products and the mitigation measures taken.