🚨 CVE-2026-8488
Allocation of resources without limits or throttling vulnerability in Progress Software MOVEit Automation allows Excessive Allocation.
This issue affects MOVEit Automation: before 2025.0.11, from 2025.1.0 before 2025.1.7.
🎖@cveNotify
Allocation of resources without limits or throttling vulnerability in Progress Software MOVEit Automation allows Excessive Allocation.
This issue affects MOVEit Automation: before 2025.0.11, from 2025.1.0 before 2025.1.7.
🎖@cveNotify
Progress
Fixed Issues 2026
The following issues were fixed in MOVEit Automation 2026.
🚨 CVE-2026-9084
MISP’s OIDC authentication plugin allowed automatic linking of an OIDC identity to an existing local user account based on the email claim when the local account had no stored sub value. Under insecure or untrusted IdP configurations where email ownership is not enforced, an attacker with a valid OIDC token could assert a victim’s email address and authenticate as that user, leading to account takeover.
🎖@cveNotify
MISP’s OIDC authentication plugin allowed automatic linking of an OIDC identity to an existing local user account based on the email claim when the local account had no stored sub value. Under insecure or untrusted IdP configurations where email ownership is not enforced, an attacker with a valid OIDC token could assert a victim’s email address and authenticate as that user, leading to account takeover.
🎖@cveNotify
GitHub
fix: [security] OIDC authentication bypass under certain insecure IdP… · MISP/MISP@71f5662
… configurations via automatic email account linking. Discovered by Ali Ganiyev (independent researcher).
🚨 CVE-2026-20171
A vulnerability in the Border Gateway Protocol (BGP) enforce-first-as feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an unauthenticated, remote attacker to trigger BGP peer flaps, resulting in a denial of service (DoS) condition.
This vulnerability is due to incorrect parsing of a transitive BGP attribute. An attacker could exploit this vulnerability by sending a crafted BGP update through an established BGP peer session. If the update propagates to an affected device, it could cause the device to drop the BGP session and flap with the BGP peer that is forwarding this update, resulting in a DoS condition.
🎖@cveNotify
A vulnerability in the Border Gateway Protocol (BGP) enforce-first-as feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an unauthenticated, remote attacker to trigger BGP peer flaps, resulting in a denial of service (DoS) condition.
This vulnerability is due to incorrect parsing of a transitive BGP attribute. An attacker could exploit this vulnerability by sending a crafted BGP update through an established BGP peer session. If the update propagates to an affected device, it could cause the device to drop the BGP session and flap with the BGP peer that is forwarding this update, resulting in a DoS condition.
🎖@cveNotify
Cisco
Cisco Security Advisory: Cisco Nexus 3000 and 9000 Series Switches Border Gateway Protocol Denial of Service Vulnerability
A vulnerability in the Border Gateway Protocol (BGP) enforce-first-as feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an unauthenticated, remote attacker to trigger BGP peer flaps, resulting…
🚨 CVE-2026-20199
A vulnerability in the SSL certificate handling of Cisco ThousandEyes Virtual Appliance could allow an authenticated, remote attacker to execute commands on the underlying operating system as the root user.
This vulnerability is due to insufficient validation of user-supplied input. An authenticated attacker could exploit this vulnerability by uploading a crafted certificate to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit this vulnerability, the attacker must have valid administrative credentials.
🎖@cveNotify
A vulnerability in the SSL certificate handling of Cisco ThousandEyes Virtual Appliance could allow an authenticated, remote attacker to execute commands on the underlying operating system as the root user.
This vulnerability is due to insufficient validation of user-supplied input. An authenticated attacker could exploit this vulnerability by uploading a crafted certificate to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit this vulnerability, the attacker must have valid administrative credentials.
🎖@cveNotify
Cisco
Cisco Security Advisory: Cisco ThousandEyes Virtual Appliance Authenticated Remote Code Execution Vulnerability
A vulnerability in the SSL certificate handling of Cisco ThousandEyes Virtual Appliance could allow an authenticated, remote attacker to execute commands on the underlying operating system as the root user.
This vulnerability is due to insufficient validation…
This vulnerability is due to insufficient validation…
🚨 CVE-2026-20206
A vulnerability in the BrowserBot component of Cisco ThousandEyes Enterprise Agent could have allowed an authenticated, remote attacker to execute arbitrary commands on Agents on behalf of the BrowserBot synthetics orchestration process. Cisco has addressed this vulnerability in the Cisco ThousandEyes Enterprise Agent, and no customer action is needed.
This vulnerability was due to insufficient input validation of command arguments that are supplied by the user. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by authenticating to the ThousandEyes SaaS and submitting crafted input into the affected parameter. A successful exploit could have allowed the attacker to execute arbitrary commands within the BrowserBot container as the node user.
To exploit this vulnerability, the attacker must have valid user credentials for the ThousandEyes SaaS and the ability to manage transaction tests.
🎖@cveNotify
A vulnerability in the BrowserBot component of Cisco ThousandEyes Enterprise Agent could have allowed an authenticated, remote attacker to execute arbitrary commands on Agents on behalf of the BrowserBot synthetics orchestration process. Cisco has addressed this vulnerability in the Cisco ThousandEyes Enterprise Agent, and no customer action is needed.
This vulnerability was due to insufficient input validation of command arguments that are supplied by the user. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by authenticating to the ThousandEyes SaaS and submitting crafted input into the affected parameter. A successful exploit could have allowed the attacker to execute arbitrary commands within the BrowserBot container as the node user.
To exploit this vulnerability, the attacker must have valid user credentials for the ThousandEyes SaaS and the ability to manage transaction tests.
🎖@cveNotify
Cisco
Cisco Security Advisory: Cisco ThousandEyes Enterprise Agent BrowserBot Command Injection Vulnerability
A vulnerability in the BrowserBot component of Cisco ThousandEyes Enterprise Agent could have allowed an authenticated, remote attacker to execute arbitrary commands on Agents on behalf of the BrowserBot synthetics orchestration process. Cisco has addressed…
🚨 CVE-2026-20223
A vulnerability in the access validation of internal REST APIs of Cisco Secure Workload could allow an unauthenticated, remote attacker to access site resources with the privileges of the Site Admin role.
This vulnerability is due to insufficient validation and authentication when accessing REST API endpoints. An attacker could exploit this vulnerability if they are able to send a crafted API request to an affected endpoint. A successful exploit could allow the attacker to read sensitive information and make configuration changes across tenant boundaries with the privileges of the Site Admin user.
🎖@cveNotify
A vulnerability in the access validation of internal REST APIs of Cisco Secure Workload could allow an unauthenticated, remote attacker to access site resources with the privileges of the Site Admin role.
This vulnerability is due to insufficient validation and authentication when accessing REST API endpoints. An attacker could exploit this vulnerability if they are able to send a crafted API request to an affected endpoint. A successful exploit could allow the attacker to read sensitive information and make configuration changes across tenant boundaries with the privileges of the Site Admin user.
🎖@cveNotify
Cisco
Cisco Security Advisory: Cisco Secure Workload Unauthorized API Access Vulnerability
A vulnerability in the access validation of internal REST APIs of Cisco Secure Workload could allow an unauthenticated, remote attacker to access site resources with the privileges of the Site Admin role.
This vulnerability is due to insufficient validation…
This vulnerability is due to insufficient validation…
🚨 CVE-2026-44923
SQL injection in InfoScale VIOM before v9.1.3 allows remote attackers to escalate privileges.
🎖@cveNotify
SQL injection in InfoScale VIOM before v9.1.3 allows remote attackers to escalate privileges.
🎖@cveNotify
🚨 CVE-2026-44925
Cross-Site Request Forgery (CSRF) vulnerability in InfoScale v.9.1.3 Operations Manager (VIOM) allows an attacker to force the user with an active session into clicking a malicious HTML link, which triggers unintended modifications on VIOM web application without the user's knowledge.
🎖@cveNotify
Cross-Site Request Forgery (CSRF) vulnerability in InfoScale v.9.1.3 Operations Manager (VIOM) allows an attacker to force the user with an active session into clicking a malicious HTML link, which triggers unintended modifications on VIOM web application without the user's knowledge.
🎖@cveNotify
🚨 CVE-2026-7613
The Cost of Goods by PixelYourSite plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'csvdata[0][cost_of_goods_value]' parameter in versions up to, and including, 1.2.12 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
🎖@cveNotify
The Cost of Goods by PixelYourSite plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'csvdata[0][cost_of_goods_value]' parameter in versions up to, and including, 1.2.12 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
🎖@cveNotify
PixelYourSite
Track the PROFIT Your Facebook Ads Generate - WooCommerce COG
WooCommerce Cost of Goods plugin: add the cost of your products, calculate the profit for each order, use profit as your Facebook conversion value.
🚨 CVE-2026-9087
A flaw was found in Keycloak. The cross-session verification proof is keyed only by (local userId,
idpAlias) and is not bound to the upstream identity that was actually verified, so a second upstream account on the same IdP can consume it and get linked to the victim's local account.
🎖@cveNotify
A flaw was found in Keycloak. The cross-session verification proof is keyed only by (local userId,
idpAlias) and is not bound to the upstream identity that was actually verified, so a second upstream account on the same IdP can consume it and get linked to the victim's local account.
🎖@cveNotify
🚨 CVE-2026-9100
The MongoDB C Driver's legacy GridFS API accepts malformed file metadata from the database without adequate validation. Crafted documents in a GridFS collection may cause any application that reads those files via the legacy API to either crash (via a division-by-zero) or silently leak process memory contents (via an out-of-bounds read).
🎖@cveNotify
The MongoDB C Driver's legacy GridFS API accepts malformed file metadata from the database without adequate validation. Crafted documents in a GridFS collection may cause any application that reads those files via the legacy API to either crash (via a division-by-zero) or silently leak process memory contents (via an out-of-bounds read).
🎖@cveNotify
🚨 CVE-2026-9101
Prototype pollution in csv parsing logic during import can lead to untrusted file paths (but not arguments) entering shell.openExternal after specific user behavior leading to "1-click" command execution.
🎖@cveNotify
Prototype pollution in csv parsing logic during import can lead to untrusted file paths (but not arguments) entering shell.openExternal after specific user behavior leading to "1-click" command execution.
🎖@cveNotify
🚨 CVE-2026-20238
In Splunk AI Toolkit versions below 5.7.3, a low-privileged user that does not hold the 'admin' or 'power' roles could access confidential data that was restricted through `srchFilter` configurations on custom roles.<br><br>The app contains an `authorize.conf` configuration file with a `srchFilter` entry that modifies the built-in ‘user’ role. Because the Splunk platform combines inherited search filters with the `OR` SPL operator, the injected filter overrides more restrictive filters on child roles.
🎖@cveNotify
In Splunk AI Toolkit versions below 5.7.3, a low-privileged user that does not hold the 'admin' or 'power' roles could access confidential data that was restricted through `srchFilter` configurations on custom roles.<br><br>The app contains an `authorize.conf` configuration file with a `srchFilter` entry that modifies the built-in ‘user’ role. Because the Splunk platform combines inherited search filters with the `OR` SPL operator, the injected filter overrides more restrictive filters on child roles.
🎖@cveNotify
Splunk Vulnerability Disclosure
Improper Access Control through Role Inheritance in Splunk AI Toolkit app
In Splunk AI Toolkit versions below 5.7.3, a low-privileged user that does not hold the 'admin' or 'power' roles could access confidential data that was restricted through `srchFilter` configurations on custom roles.
The app contains an `authorize.conf`…
The app contains an `authorize.conf`…
🚨 CVE-2026-20239
In Splunk Enterprise versions below 10.2.2 and 10.0.5, and Splunk Cloud Platform versions below 10.3.2512.8, 10.2.2510.11, 10.1.2507.21, and 10.0.2503.13, a user with a role that has access to the `_internal` index could view session cookies and response bodies that contain sensitive data.
🎖@cveNotify
In Splunk Enterprise versions below 10.2.2 and 10.0.5, and Splunk Cloud Platform versions below 10.3.2512.8, 10.2.2510.11, 10.1.2507.21, and 10.0.2503.13, a user with a role that has access to the `_internal` index could view session cookies and response bodies that contain sensitive data.
🎖@cveNotify
Splunk Vulnerability Disclosure
Sensitive Information Disclosure through Log Files in Splunk Enterprise
In Splunk Enterprise versions below 10.2.2 and 10.0.5, and Splunk Cloud Platform versions below 10.3.2512.8, 10.2.2510.11, 10.1.2507.21, and 10.0.2503.13, a user with a role that has access to the `_internal` index could view session cookies and response…
🚨 CVE-2026-20240
In Splunk Enterprise versions below 10.2.2, 10.0.5, 9.4.11, and 9.3.12, and Splunk Cloud Platform versions below 10.4.2603.1, 10.3.2512.9, 10.2.2510.11, 10.1.2507.21, 10.0.2503.13, and 9.3.2411.129, a low-privileged user that does not hold the ‘admin’ or ‘power’ Splunk roles could cause a Denial of Service by exploiting the `coldToFrozen.sh` script in the `splunk_archiver` app to rename critical Splunk directories, making the instance non-functional.<br><br>The Denial of Service is possible because of missing input validation in the `coldToFrozen.sh` script, which accepts arbitrary file paths and renames them without restricting operations to safe directories.
🎖@cveNotify
In Splunk Enterprise versions below 10.2.2, 10.0.5, 9.4.11, and 9.3.12, and Splunk Cloud Platform versions below 10.4.2603.1, 10.3.2512.9, 10.2.2510.11, 10.1.2507.21, 10.0.2503.13, and 9.3.2411.129, a low-privileged user that does not hold the ‘admin’ or ‘power’ Splunk roles could cause a Denial of Service by exploiting the `coldToFrozen.sh` script in the `splunk_archiver` app to rename critical Splunk directories, making the instance non-functional.<br><br>The Denial of Service is possible because of missing input validation in the `coldToFrozen.sh` script, which accepts arbitrary file paths and renames them without restricting operations to safe directories.
🎖@cveNotify
Splunk Vulnerability Disclosure
Denial of Service through coldToFrozen.sh Script in Splunk Enterprise
In Splunk Enterprise versions below 10.2.2, 10.0.5, 9.4.11, and 9.3.12, a low-privileged user that does not hold the ‘admin’ or ‘power’ Splunk roles could cause a Denial of Service by exploiting the `coldToFrozen.sh` script in the `splunk_archiver` app to…
🚨 CVE-2026-30691
Cross-Site Scripting (XSS) vulnerability in @cyntler/react-doc-viewer v1.17.1 allows remote attackers to execute arbitrary JavaScript via a crafted .txt file. The TXTRenderer component fails to sanitize file content and explicitly casts raw data as a ReactNode
🎖@cveNotify
Cross-Site Scripting (XSS) vulnerability in @cyntler/react-doc-viewer v1.17.1 allows remote attackers to execute arbitrary JavaScript via a crafted .txt file. The TXTRenderer component fails to sanitize file content and explicitly casts raw data as a ReactNode
🎖@cveNotify
GitHub
Security: Stored XSS in TXTRenderer via unsafe ReactNode casting · Issue #317 · cyntler/react-doc-viewer
Description A Stored Cross-Site Scripting (XSS) vulnerability was identified in the @cyntler/react-doc-viewer package (v1.17.1). The vulnerability exists in the TXTRenderer component, which renders...
🚨 CVE-2026-23734
XWiki Platform is a generic wiki platform. Versions prior to 18.1.0-rc-1, 17.10.3, 17.4.9, and 16.10.17 allow access to read configuration files by using URLs such as http://localhost:8080/bin/ssx/Main/WebHome?resource=/../../WEB-INF/xwiki.cfg&minify=false, leading to Path Traversal. The vulnerability is can be exploited via resources parameter the ssx and jsx endpoints by using leading slashes. This issue has been patched in 18.1.0-rc-1, 17.10.3, 17.4.9, 16.10.17.
🎖@cveNotify
XWiki Platform is a generic wiki platform. Versions prior to 18.1.0-rc-1, 17.10.3, 17.4.9, and 16.10.17 allow access to read configuration files by using URLs such as http://localhost:8080/bin/ssx/Main/WebHome?resource=/../../WEB-INF/xwiki.cfg&minify=false, leading to Path Traversal. The vulnerability is can be exploited via resources parameter the ssx and jsx endpoints by using leading slashes. This issue has been patched in 18.1.0-rc-1, 17.10.3, 17.4.9, 16.10.17.
🎖@cveNotify
GitHub
XWIKI-23898: Improve classpath resolution for Tomcat · xwiki/xwiki-commons@a979caf
Common Modules used by other XWiki top level projects - XWIKI-23898: Improve classpath resolution for Tomcat · xwiki/xwiki-commons@a979caf
🚨 CVE-2026-24216
NVIDIA BioNemo for Linux contains a vulnerability where a user could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, denial of service, information disclosure, and data tampering.
🎖@cveNotify
NVIDIA BioNemo for Linux contains a vulnerability where a user could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, denial of service, information disclosure, and data tampering.
🎖@cveNotify
🚨 CVE-2026-24217
NVIDIA BioNeMo Core for Linux contains a vulnerability where a user could cause a path traversal by loading a malicious file. A successful exploit of this vulnerability might lead to code execution, denial of service, information disclosure, and data tampering.
🎖@cveNotify
NVIDIA BioNeMo Core for Linux contains a vulnerability where a user could cause a path traversal by loading a malicious file. A successful exploit of this vulnerability might lead to code execution, denial of service, information disclosure, and data tampering.
🎖@cveNotify