🚨 CVE-2026-11534
A vulnerability was detected in imvks786 student_management_system up to 9599b560ad3c3b83e75d328b76bedcd489ef1f46. Affected by this issue is some unknown functionality of the file /add.php. The manipulation of the argument name/address/fname results in cross site scripting. It is possible to launch the attack remotely. The exploit is now public and may be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The project was informed of the problem early through an issue report but has not responded yet.
🎖@cveNotify
A vulnerability was detected in imvks786 student_management_system up to 9599b560ad3c3b83e75d328b76bedcd489ef1f46. Affected by this issue is some unknown functionality of the file /add.php. The manipulation of the argument name/address/fname results in cross site scripting. It is possible to launch the attack remotely. The exploit is now public and may be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The project was informed of the problem early through an issue report but has not responded yet.
🎖@cveNotify
🚨 CVE-2026-11611
A flaw was found in 389 Directory Server. The Content Synchronization persistent search plugin allows unbounded memory growth when an authenticated client stops reading sync responses, enabling denial of service. Additional race conditions in plugin thread lifecycle can cause crashes during connection teardown or shutdown.
🎖@cveNotify
A flaw was found in 389 Directory Server. The Content Synchronization persistent search plugin allows unbounded memory growth when an authenticated client stops reading sync responses, enabling denial of service. Additional race conditions in plugin thread lifecycle can cause crashes during connection teardown or shutdown.
🎖@cveNotify
🚨 CVE-2026-25555
OpenBullet2 through version 0.3.2 contains an authentication bypass vulnerability in the API key authentication middleware that allows unauthenticated attackers to gain admin access by supplying an empty X-Api-Key header value. Attackers can exploit the middleware's comparison of the supplied header against an empty AdminApiKey default string to access the admin console and all API endpoints without valid credentials.
🎖@cveNotify
OpenBullet2 through version 0.3.2 contains an authentication bypass vulnerability in the API key authentication middleware that allows unauthenticated attackers to gain admin access by supplying an empty X-Api-Key header value. Attackers can exploit the middleware's comparison of the supplied header against an empty AdminApiKey default string to access the admin console and all API endpoints without valid credentials.
🎖@cveNotify
Hackernoon
One Empty Header to Admin: How an Auth Bypass Breaks OpenBullet2
Five vulnerabilities in OpenBullet2: an empty API key, path traversal, RCE, and an NTLM hash leak.
🚨 CVE-2026-25559
OpenBullet2 through version 0.3.2 contains a path traversal vulnerability in the wordlist endpoint that allows authenticated attackers to perform arbitrary file read, write, and delete operations by supplying unsanitized absolute paths to the upload handler and wordlist functions. Attackers can chain the file write and delete primitives to achieve remote code execution by manipulating critical system files such as /etc/passwd, with full system impact since the application runs as root by default.
🎖@cveNotify
OpenBullet2 through version 0.3.2 contains a path traversal vulnerability in the wordlist endpoint that allows authenticated attackers to perform arbitrary file read, write, and delete operations by supplying unsanitized absolute paths to the upload handler and wordlist functions. Attackers can chain the file write and delete primitives to achieve remote code execution by manipulating critical system files such as /etc/passwd, with full system impact since the application runs as root by default.
🎖@cveNotify
Hackernoon
One Empty Header to Admin: How an Auth Bypass Breaks OpenBullet2
Five vulnerabilities in OpenBullet2: an empty API key, path traversal, RCE, and an NTLM hash leak.
🚨 CVE-2026-25855
OpenBullet2 through version 0.3.2 contains a remote code execution vulnerability that allows authenticated users to execute arbitrary commands by uploading script files (.bat.ps1.sh) through the FileProxySource proxy loading feature. Attackers can upload malicious script files as proxy sources, causing the server to execute the scripts and return output as proxy lines, resulting in arbitrary command execution on the host as the process user.
🎖@cveNotify
OpenBullet2 through version 0.3.2 contains a remote code execution vulnerability that allows authenticated users to execute arbitrary commands by uploading script files (.bat.ps1.sh) through the FileProxySource proxy loading feature. Attackers can upload malicious script files as proxy sources, causing the server to execute the scripts and return output as proxy lines, resulting in arbitrary command execution on the host as the process user.
🎖@cveNotify
Hackernoon
One Empty Header to Admin: How an Auth Bypass Breaks OpenBullet2
Five vulnerabilities in OpenBullet2: an empty API key, path traversal, RCE, and an NTLM hash leak.
🚨 CVE-2026-25856
OpenBullet2 through version 0.3.2 contains an authenticated remote code execution vulnerability that allows authenticated users to execute arbitrary C# code on the server host by creating or modifying job configurations. Attackers can leverage the plain C# execution mode, which lacks reference filtering or API restrictions, to access the file system, spawn processes, and invoke arbitrary .NET APIs as the process user.
🎖@cveNotify
OpenBullet2 through version 0.3.2 contains an authenticated remote code execution vulnerability that allows authenticated users to execute arbitrary C# code on the server host by creating or modifying job configurations. Attackers can leverage the plain C# execution mode, which lacks reference filtering or API restrictions, to access the file system, spawn processes, and invoke arbitrary .NET APIs as the process user.
🎖@cveNotify
Hackernoon
One Empty Header to Admin: How an Auth Bypass Breaks OpenBullet2
Five vulnerabilities in OpenBullet2: an empty API key, path traversal, RCE, and an NTLM hash leak.
🚨 CVE-2026-39908
OpenBullet2 through version 0.3.2 on Windows contains a credential disclosure vulnerability that allows remote attackers to capture the NTLMv2 hash of the process user by configuring a job proxy source with a UNC path pointing to an attacker-controlled server. When the job starts, the application attempts to load proxies from the UNC path, triggering an SMB authentication attempt that discloses the NTLMv2 hash, which can then be relayed or cracked offline.
🎖@cveNotify
OpenBullet2 through version 0.3.2 on Windows contains a credential disclosure vulnerability that allows remote attackers to capture the NTLMv2 hash of the process user by configuring a job proxy source with a UNC path pointing to an attacker-controlled server. When the job starts, the application attempts to load proxies from the UNC path, triggering an SMB authentication attempt that discloses the NTLMv2 hash, which can then be relayed or cracked offline.
🎖@cveNotify
Hackernoon
One Empty Header to Admin: How an Auth Bypass Breaks OpenBullet2
Five vulnerabilities in OpenBullet2: an empty API key, path traversal, RCE, and an NTLM hash leak.
🚨 CVE-2026-39910
STACKIT IaaS API contains a missing authorization check vulnerability that allows authenticated, low-privileged attackers to escalate privileges to full organization compromise by attaching arbitrary service accounts to virtual machines they control. Attackers can exploit the unvalidated PUT servers service-accounts endpoint to attach high-privileged service accounts and query the Instance Metadata Service to retrieve OAuth2 tokens, bypassing tenant boundaries and gaining unauthorized control over the entire organization environment.
🎖@cveNotify
STACKIT IaaS API contains a missing authorization check vulnerability that allows authenticated, low-privileged attackers to escalate privileges to full organization compromise by attaching arbitrary service accounts to virtual machines they control. Attackers can exploit the unvalidated PUT servers service-accounts endpoint to attach high-privileged service accounts and query the Instance Metadata Service to retrieve OAuth2 tokens, bypassing tenant boundaries and gaining unauthorized control over the entire organization environment.
🎖@cveNotify
status.stackit.cloud
STACKIT Status
Welcome to STACKIT's home for real-time and historical data on system performance.
🚨 CVE-2026-41448
AdGuard Home, when started with the --glinet flag, contains an authentication bypass vulnerability that allows unauthenticated attackers to gain full admin access by supplying a path traversal sequence in the Admin-Token cookie, exploiting unsanitized string concatenation in the token file path construction within the authglinet middleware. Attackers can craft a request with a traversal payload in the Admin-Token header to redirect file reads to arbitrary paths.
🎖@cveNotify
AdGuard Home, when started with the --glinet flag, contains an authentication bypass vulnerability that allows unauthenticated attackers to gain full admin access by supplying a path traversal sequence in the Admin-Token cookie, exploiting unsanitized string concatenation in the token file path construction within the authglinet middleware. Attackers can craft a request with a traversal payload in the Admin-Token header to redirect file reads to arbitrary paths.
🎖@cveNotify
GitHub
Release AdGuard Home v0.107.77 · AdguardTeam/AdGuardHome
The quality of a product is not defined solely by code or developers’ technical prowess. A strong community—or the lack of one—can often make or break how successful a piece of software will be. We...
🚨 CVE-2026-43966
Improper Neutralization of CRLF Sequences in HTTP Headers ('HTTP Request/Response Splitting') vulnerability in ninenines cowlib allows HTTP response splitting via non-VCHAR bytes in structured-fields string values.
cow_http_struct_hd:escape_string/2 in cowlib only escapes \ and ", passing all other bytes through verbatim. This creates an encoder/decoder asymmetry: the matching parser accepts only printable ASCII (0x20–0x7E, excluding " and \), but the encoder emits any byte including CR and LF. An application that builds a structured HTTP header via cow_http_struct_hd:item/1 (or a higher-level wrapper such as cow_http_hd:wt_protocol/1) from attacker-controlled input can have \r\n injected into the serialized header value. Once on the wire, the injected CRLF terminates the current header and any following bytes are interpreted as a new header, enabling HTTP response splitting.
This issue affects cowlib from 2.9.0.
🎖@cveNotify
Improper Neutralization of CRLF Sequences in HTTP Headers ('HTTP Request/Response Splitting') vulnerability in ninenines cowlib allows HTTP response splitting via non-VCHAR bytes in structured-fields string values.
cow_http_struct_hd:escape_string/2 in cowlib only escapes \ and ", passing all other bytes through verbatim. This creates an encoder/decoder asymmetry: the matching parser accepts only printable ASCII (0x20–0x7E, excluding " and \), but the encoder emits any byte including CR and LF. An application that builds a structured HTTP header via cow_http_struct_hd:item/1 (or a higher-level wrapper such as cow_http_hd:wt_protocol/1) from attacker-controlled input can have \r\n injected into the serialized header value. Once on the wire, the injected CRLF terminates the current header and any following bytes are interpreted as a new header, enabling HTTP response splitting.
This issue affects cowlib from 2.9.0.
🎖@cveNotify
Erlang Ecosystem Foundation CNA
HTTP Response Splitting via Non-VCHAR Bytes in cow_http_struct_hd:escape_string/2
This project handles the CVE Numbering Authority (CNA) for the Erlang Ecosystem Foundation (EEF).
🚨 CVE-2026-45581
fabric-chaincode-java is a Java based implementation of Hyperledger Fabric chaincode shim APIs. From version 2.3.1 to before version 2.5.10, when chaincode is deployed in chaincode-as-a-service mode with TLS enabled, the chaincode server INFO level logging includes the TLS private key password in plaintext. An attacker with access to the chaincode server logs could recover the TLS private key password. If the attacker can also obtain the TLS private key, they could impersonate the chaincode server. This issue has been patched in version 2.5.10.
🎖@cveNotify
fabric-chaincode-java is a Java based implementation of Hyperledger Fabric chaincode shim APIs. From version 2.3.1 to before version 2.5.10, when chaincode is deployed in chaincode-as-a-service mode with TLS enabled, the chaincode server INFO level logging includes the TLS private key password in plaintext. An attacker with access to the chaincode server logs could recover the TLS private key password. If the attacker can also obtain the TLS private key, they could impersonate the chaincode server. This issue has been patched in version 2.5.10.
🎖@cveNotify
GitHub
TLS private key password disclosed in INFO logs when running in chaincode-as-a-service mode
When chaincode is deployed in chaincode-as-a-service mode with TLS enabled, the chaincode server INFO level logging includes the TLS private key password in plaintext. An attacker with access to th...
🚨 CVE-2026-46276
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix zero-size GDS range init on RDNA4
RDNA4 (GFX 12) hardware removes the GDS, GWS, and OA on-chip memory
resources. The gfx_v12_0 initialisation code correctly leaves
adev->gds.gds_size, adev->gds.gws_size, and adev->gds.oa_size at
zero to reflect this.
amdgpu_ttm_init() unconditionally calls amdgpu_ttm_init_on_chip() for
each of these resources regardless of size. When the size is zero,
amdgpu_ttm_init_on_chip() forwards the call to ttm_range_man_init(),
which calls drm_mm_init(mm, 0, 0). drm_mm_init() immediately fires
DRM_MM_BUG_ON(start + size <= start) -- trivially true when size is
zero -- crashing the kernel during modprobe of amdgpu on an RX 9070 XT.
Guard against this by returning 0 early from
amdgpu_ttm_init_on_chip() when size_in_page is zero. This skips TTM
resource manager registration for hardware resources that are absent,
without affecting any other GPU type.
DRM_MM_BUG_ON() only asserts if CONFIG_DRM_DEBUG_MM is enabled in
the kernel config. This is apparently rarely enabled as these chips
have been in the market for over a year and this issue was only reported
now.
Oops-Analysis: http://oops.fenrus.org/reports/bugzilla.korg/221376/report.html
(cherry picked from commit 5719ce5865279cad4fd5f01011fe037168503f2d)
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix zero-size GDS range init on RDNA4
RDNA4 (GFX 12) hardware removes the GDS, GWS, and OA on-chip memory
resources. The gfx_v12_0 initialisation code correctly leaves
adev->gds.gds_size, adev->gds.gws_size, and adev->gds.oa_size at
zero to reflect this.
amdgpu_ttm_init() unconditionally calls amdgpu_ttm_init_on_chip() for
each of these resources regardless of size. When the size is zero,
amdgpu_ttm_init_on_chip() forwards the call to ttm_range_man_init(),
which calls drm_mm_init(mm, 0, 0). drm_mm_init() immediately fires
DRM_MM_BUG_ON(start + size <= start) -- trivially true when size is
zero -- crashing the kernel during modprobe of amdgpu on an RX 9070 XT.
Guard against this by returning 0 early from
amdgpu_ttm_init_on_chip() when size_in_page is zero. This skips TTM
resource manager registration for hardware resources that are absent,
without affecting any other GPU type.
DRM_MM_BUG_ON() only asserts if CONFIG_DRM_DEBUG_MM is enabled in
the kernel config. This is apparently rarely enabled as these chips
have been in the market for over a year and this issue was only reported
now.
Oops-Analysis: http://oops.fenrus.org/reports/bugzilla.korg/221376/report.html
(cherry picked from commit 5719ce5865279cad4fd5f01011fe037168503f2d)
🎖@cveNotify
🚨 CVE-2026-46312
In the Linux kernel, the following vulnerability has been resolved:
media: videobuf2: Set vma_flags in vb2_dma_sg_mmap
vb2_dma_contig sets VMA flags VM_DONTEXPAND and VM_DONTDUMP and I do not
see a reason why vb2_dma_sg should behave differently. This avoids
hitting `WARN_ON(!(vma->vm_flags & VM_DONTEXPAND));` in
drm_gem_mmap_obj() during mmap() of an imported dma-buf from the out of
tree Apple ISP camera capture driver which uses vb2_dma_sg_memops.
gst-launch-1.0 v4l2src ! gtk4paintablesink
[ 38.201528] ------------[ cut here ]------------
[ 38.202135] WARNING: CPU: 7 PID: 2362 at drivers/gpu/drm/drm_gem.c:1144 drm_gem_mmap_obj+0x1f8/0x210
[ 38.203278] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer
snd_seq snd_seq_device uinput nf_conntrack_netbios_ns
nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib
nft_reject_inet nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat
nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables qrtr bnep
nls_ascii i2c_dev loop fuse dm_multipath nfnetlink brcmfmac_wcc
hid_magicmouse hci_bcm4377 brcmfmac brcmutil bluetooth ecdh_generic
cfg80211 ecc btrfs xor xor_neon rfkill hid_apple raid6_pq joydev
aop_als apple_nvmem_spmi industrialio snd_soc_aop apple_z2
snd_soc_cs42l84 tps6598x snd_soc_tas2764 macsmc_reboot spi_nor
macsmc_hwmon rtc_macsmc gpio_macsmc macsmc_power regmap_spmi
macsmc_input dockchannel_hid panel_summit appledrm nvme_apple dwc3
snd_soc_macaudio drm_client_lib nvme_core phy_apple_atc hwmon
apple_sart apple_dockchannel macsmc apple_rtkit_helper
spmi_apple_controller aop apple_wdt mfd_core nvmem_apple_efuses
pinctrl_apple_gpio apple_isp apple_dcp videobuf2_dma_sg mux_core
spi_apple
[ 38.203300] videobuf2_memops i2c_pasemi_platform snd_soc_apple_mca videobuf2_v4l2 videodev clk_apple_nco videobuf2_common snd_pcm_dmaengine adpdrm asahi apple_admac adpdrm_mipi drm_dma_helper pwm_apple i2c_pasemi_core drm_display_helper mc cec apple_dart ofpart apple_soc_cpufreq leds_pwm phram
[ 38.217677] CPU: 7 UID: 1000 PID: 2362 Comm: gst-launch-1.0 Tainted: G W 6.17.6+ #asahi-dev PREEMPT(full)
[ 38.219040] Tainted: [W]=WARN
[ 38.219398] Hardware name: Apple MacBook Pro (13-inch, M2, 2022) (DT)
[ 38.220213] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 38.221088] pc : drm_gem_mmap_obj+0x1f8/0x210
[ 38.221643] lr : drm_gem_mmap_obj+0x78/0x210
[ 38.222178] sp : ffffc0008dc678e0
[ 38.222579] x29: ffffc0008dc678e0 x28: 0000000000042a97 x27: ffff8000b701b480
[ 38.223465] x26: 00000000000000fb x25: ffffc0008dc67d20 x24: ffffc0008dc67968
[ 38.224402] x23: ffff8000e3ca5600 x22: ffff8000265b7800 x21: ffff80003000c0c0
[ 38.225279] x20: 0000000000000000 x19: ffff8000b68c5200 x18: ffffc0008dc67968
[ 38.226151] x17: 0000000000000000 x16: 0000000000000000 x15: ffffc000810a30a8
[ 38.227042] x14: 00007fff637effff x13: 00005555de91ffff x12: 00007fff63293fff
[ 38.227942] x11: 0000000000000000 x10: ffff8000184ecf08 x9 : ffffc0007a1900c8
[ 38.228824] x8 : ffffc0008dc67968 x7 : 0000000000000012 x6 : ffffc0015cf1c000
[ 38.229703] x5 : ffffc0008dc676a0 x4 : ffffc00081a27dc0 x3 : 0000000000000038
[ 38.230607] x2 : 0000000000000003 x1 : 0000000000000003 x0 : 00000000100000fb
[ 38.231488] Call trace:
[ 38.231806] drm_gem_mmap_obj+0x1f8/0x210 (P)
[ 38.232342] drm_gem_mmap+0x140/0x260
[ 38.232813] __mmap_region+0x488/0x9a0
[ 38.233277] mmap_region+0xd0/0x148
[ 38.233703] do_mmap+0x350/0x5c0
[ 38.234148] vm_mmap_pgoff+0x14c/0x200
[ 38.234612] ksys_mmap_pgoff+0x150/0x208
[ 38.235107] __arm64_sys_mmap+0x34/0x50
[ 38.235611] invoke_syscall+0x50/0x120
[ 38.236075] el0_svc_common.constprop.0+0x48/0xf0
[ 38.236680] do_el0_svc+0x24/0x38
[ 38.237113] el0_svc+0x38/0x168
[ 38.237507] el0t_64_sync_handler+0xa0/0xe8
[ 38.238034] el0t_64_sync+0x198/0x1a0
[ 38.238491] ---[ end trace 0000000000000000 ]---
There were discussions in [1] at the end of 2023 that mmap() on imported
---truncated---
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
media: videobuf2: Set vma_flags in vb2_dma_sg_mmap
vb2_dma_contig sets VMA flags VM_DONTEXPAND and VM_DONTDUMP and I do not
see a reason why vb2_dma_sg should behave differently. This avoids
hitting `WARN_ON(!(vma->vm_flags & VM_DONTEXPAND));` in
drm_gem_mmap_obj() during mmap() of an imported dma-buf from the out of
tree Apple ISP camera capture driver which uses vb2_dma_sg_memops.
gst-launch-1.0 v4l2src ! gtk4paintablesink
[ 38.201528] ------------[ cut here ]------------
[ 38.202135] WARNING: CPU: 7 PID: 2362 at drivers/gpu/drm/drm_gem.c:1144 drm_gem_mmap_obj+0x1f8/0x210
[ 38.203278] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer
snd_seq snd_seq_device uinput nf_conntrack_netbios_ns
nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib
nft_reject_inet nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat
nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables qrtr bnep
nls_ascii i2c_dev loop fuse dm_multipath nfnetlink brcmfmac_wcc
hid_magicmouse hci_bcm4377 brcmfmac brcmutil bluetooth ecdh_generic
cfg80211 ecc btrfs xor xor_neon rfkill hid_apple raid6_pq joydev
aop_als apple_nvmem_spmi industrialio snd_soc_aop apple_z2
snd_soc_cs42l84 tps6598x snd_soc_tas2764 macsmc_reboot spi_nor
macsmc_hwmon rtc_macsmc gpio_macsmc macsmc_power regmap_spmi
macsmc_input dockchannel_hid panel_summit appledrm nvme_apple dwc3
snd_soc_macaudio drm_client_lib nvme_core phy_apple_atc hwmon
apple_sart apple_dockchannel macsmc apple_rtkit_helper
spmi_apple_controller aop apple_wdt mfd_core nvmem_apple_efuses
pinctrl_apple_gpio apple_isp apple_dcp videobuf2_dma_sg mux_core
spi_apple
[ 38.203300] videobuf2_memops i2c_pasemi_platform snd_soc_apple_mca videobuf2_v4l2 videodev clk_apple_nco videobuf2_common snd_pcm_dmaengine adpdrm asahi apple_admac adpdrm_mipi drm_dma_helper pwm_apple i2c_pasemi_core drm_display_helper mc cec apple_dart ofpart apple_soc_cpufreq leds_pwm phram
[ 38.217677] CPU: 7 UID: 1000 PID: 2362 Comm: gst-launch-1.0 Tainted: G W 6.17.6+ #asahi-dev PREEMPT(full)
[ 38.219040] Tainted: [W]=WARN
[ 38.219398] Hardware name: Apple MacBook Pro (13-inch, M2, 2022) (DT)
[ 38.220213] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 38.221088] pc : drm_gem_mmap_obj+0x1f8/0x210
[ 38.221643] lr : drm_gem_mmap_obj+0x78/0x210
[ 38.222178] sp : ffffc0008dc678e0
[ 38.222579] x29: ffffc0008dc678e0 x28: 0000000000042a97 x27: ffff8000b701b480
[ 38.223465] x26: 00000000000000fb x25: ffffc0008dc67d20 x24: ffffc0008dc67968
[ 38.224402] x23: ffff8000e3ca5600 x22: ffff8000265b7800 x21: ffff80003000c0c0
[ 38.225279] x20: 0000000000000000 x19: ffff8000b68c5200 x18: ffffc0008dc67968
[ 38.226151] x17: 0000000000000000 x16: 0000000000000000 x15: ffffc000810a30a8
[ 38.227042] x14: 00007fff637effff x13: 00005555de91ffff x12: 00007fff63293fff
[ 38.227942] x11: 0000000000000000 x10: ffff8000184ecf08 x9 : ffffc0007a1900c8
[ 38.228824] x8 : ffffc0008dc67968 x7 : 0000000000000012 x6 : ffffc0015cf1c000
[ 38.229703] x5 : ffffc0008dc676a0 x4 : ffffc00081a27dc0 x3 : 0000000000000038
[ 38.230607] x2 : 0000000000000003 x1 : 0000000000000003 x0 : 00000000100000fb
[ 38.231488] Call trace:
[ 38.231806] drm_gem_mmap_obj+0x1f8/0x210 (P)
[ 38.232342] drm_gem_mmap+0x140/0x260
[ 38.232813] __mmap_region+0x488/0x9a0
[ 38.233277] mmap_region+0xd0/0x148
[ 38.233703] do_mmap+0x350/0x5c0
[ 38.234148] vm_mmap_pgoff+0x14c/0x200
[ 38.234612] ksys_mmap_pgoff+0x150/0x208
[ 38.235107] __arm64_sys_mmap+0x34/0x50
[ 38.235611] invoke_syscall+0x50/0x120
[ 38.236075] el0_svc_common.constprop.0+0x48/0xf0
[ 38.236680] do_el0_svc+0x24/0x38
[ 38.237113] el0_svc+0x38/0x168
[ 38.237507] el0t_64_sync_handler+0xa0/0xe8
[ 38.238034] el0t_64_sync+0x198/0x1a0
[ 38.238491] ---[ end trace 0000000000000000 ]---
There were discussions in [1] at the end of 2023 that mmap() on imported
---truncated---
🎖@cveNotify
🚨 CVE-2026-46313
In the Linux kernel, the following vulnerability has been resolved:
media: intel/ipu6: fix error pointer dereference
In a error path isp->psys is confirmed to be an error pointer not NULL so
this condition is true and the error pointer is dereferenced. So isp-psys
should be set to NULL before going to out_ipu6_bus_del_devices.
Detected by Smatch:
drivers/media/pci/intel/ipu6/ipu6.c:690 ipu6_pci_probe() error:
'isp->psys' dereferencing possible ERR_PTR()
[Sakari Ailus: Fix commit message.]
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
media: intel/ipu6: fix error pointer dereference
In a error path isp->psys is confirmed to be an error pointer not NULL so
this condition is true and the error pointer is dereferenced. So isp-psys
should be set to NULL before going to out_ipu6_bus_del_devices.
Detected by Smatch:
drivers/media/pci/intel/ipu6/ipu6.c:690 ipu6_pci_probe() error:
'isp->psys' dereferencing possible ERR_PTR()
[Sakari Ailus: Fix commit message.]
🎖@cveNotify
🚨 CVE-2026-46314
In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Reject empty multisync extension to prevent infinite loop
v3d_get_extensions() walks a userspace-provided singly-linked list of
ioctl extensions without any bound on the chain length. A local user
can craft a self-referential extension (ext->next == &ext) with zero
in_sync_count and out_sync_count, which bypasses the existing duplicate-
extension guard:
if (se->in_sync_count || se->out_sync_count)
return -EINVAL;
The guard never fires because v3d_get_multisync_post_deps() returns
immediately when count is zero, leaving both fields at zero on every
iteration. The result is an infinite loop in kernel context, blocking
the calling thread and pegging a CPU core indefinitely.
Fix this by rejecting a multisync extension where both in_sync_count
and out_sync_count are zero in v3d_get_multisync_submit_deps(). An
empty multisync carries no synchronization information and serves no
useful purpose, so returning -EINVAL for such an extension is the
correct defense against this attack vector.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Reject empty multisync extension to prevent infinite loop
v3d_get_extensions() walks a userspace-provided singly-linked list of
ioctl extensions without any bound on the chain length. A local user
can craft a self-referential extension (ext->next == &ext) with zero
in_sync_count and out_sync_count, which bypasses the existing duplicate-
extension guard:
if (se->in_sync_count || se->out_sync_count)
return -EINVAL;
The guard never fires because v3d_get_multisync_post_deps() returns
immediately when count is zero, leaving both fields at zero on every
iteration. The result is an infinite loop in kernel context, blocking
the calling thread and pegging a CPU core indefinitely.
Fix this by rejecting a multisync extension where both in_sync_count
and out_sync_count are zero in v3d_get_multisync_submit_deps(). An
empty multisync carries no synchronization information and serves no
useful purpose, so returning -EINVAL for such an extension is the
correct defense against this attack vector.
🎖@cveNotify
🚨 CVE-2026-46481
OpenMetadata is a unified metadata platform. Prior to version 1.12.4, a non-admin SSO user can trigger a TEST_CONNECTION workflow for a Database Service and receive, in the HTTP 201 response of POST /api/v1/automations/workflows, both the cleartext database password in request.connection.config.password and the ingestion bot JWT in openMetadataServerConnection.securityConfig.jwtToken. The leaked ingestion-bot token can then be reused as Authorization: Bearer <jwt> to access sensitive service APIs with bot-level privileges. This issue has been patched in version 1.12.4.
🎖@cveNotify
OpenMetadata is a unified metadata platform. Prior to version 1.12.4, a non-admin SSO user can trigger a TEST_CONNECTION workflow for a Database Service and receive, in the HTTP 201 response of POST /api/v1/automations/workflows, both the cleartext database password in request.connection.config.password and the ingestion bot JWT in openMetadataServerConnection.securityConfig.jwtToken. The leaked ingestion-bot token can then be reused as Authorization: Bearer <jwt> to access sensitive service APIs with bot-level privileges. This issue has been patched in version 1.12.4.
🎖@cveNotify
GitHub
[OpenMetadata 1.12.1] TEST_CONNECTION workflow leaks ingestion-bot JWT and database password to regular user
**This is not applicable if you are configuring Secrets Store to store the credentials. Please make sure to follow the best practices when deploying in production**
In OpenMetadata 1.12.1, a non...
In OpenMetadata 1.12.1, a non...
🚨 CVE-2026-48507
Snipe-IT is an IT asset/license management system. A vulnerability in versions prior to 8.6.0 allows a non-admin user holding only the granular `users.edit` permission to lock every admin out of the instance by editing the `activated` flag (which determines whether or not a user can login) and the `ldap_import` flag, which determines whether or not the user can request a password reset. Version 8.6.0 contains a patch.
🎖@cveNotify
Snipe-IT is an IT asset/license management system. A vulnerability in versions prior to 8.6.0 allows a non-admin user holding only the granular `users.edit` permission to lock every admin out of the instance by editing the `activated` flag (which determines whether or not a user can login) and the `ldap_import` flag, which determines whether or not the user can request a password reset. Version 8.6.0 contains a patch.
🎖@cveNotify
GitHub
Disallow ldap_import and activated in bulk editing users if user does… · grokability/snipe-it@403f9c8
…n’t have permission
🚨 CVE-2026-11552
A vulnerability has been found in SourceCodester Onlne Examination & Learning Management System and Syllabus-aligned Learning Management and Examination System 1.0. Affected by this issue is some unknown functionality of the file import_users.php. The manipulation of the argument raw_password with the input CICT_2026 leads to use of hard-coded password. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This product is distributed under two entirely different names.
🎖@cveNotify
A vulnerability has been found in SourceCodester Onlne Examination & Learning Management System and Syllabus-aligned Learning Management and Examination System 1.0. Affected by this issue is some unknown functionality of the file import_users.php. The manipulation of the argument raw_password with the input CICT_2026 leads to use of hard-coded password. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This product is distributed under two entirely different names.
🎖@cveNotify
Vulnerability Database
CVE-2026-11552 in Onlne Examination & Learning Management System
A vulnerability has been found in SourceCodester Onlne Examination & Learning Management System and Syllabus-aligned Learning Management and Examination System 1.0. This vulnerability is documented as CVE-2026-11552.
🚨 CVE-2026-11553
A vulnerability was found in Tenda HG7HG9 and HG10 300001138_en_xpon. This affects the function formPPPEdit of the file /boaform/formPPPEdit. The manipulation of the argument encodename results in stack-based buffer overflow. The attack can be launched remotely. The exploit has been made public and could be used.
🎖@cveNotify
A vulnerability was found in Tenda HG7HG9 and HG10 300001138_en_xpon. This affects the function formPPPEdit of the file /boaform/formPPPEdit. The manipulation of the argument encodename results in stack-based buffer overflow. The attack can be launched remotely. The exploit has been made public and could be used.
🎖@cveNotify
GitHub
GitHub - xiezhihua-1127/Tenda-Stack-Overflow: A stack-based buffer overflow vulnerability exists in the formPPPEdit interface (via…
A stack-based buffer overflow vulnerability exists in the formPPPEdit interface (via the encodename parameter) exposed through the web management interface (/boaform/formPPPEdit) of the Tenda HG10 ...
🚨 CVE-2026-11554
A vulnerability was determined in TOTOLINK CP450 4.1.0cu.747. This vulnerability affects unknown code of the file /etc/vsftpd.conf of the component vsftpd. This manipulation causes least privilege violation. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized.
🎖@cveNotify
A vulnerability was determined in TOTOLINK CP450 4.1.0cu.747. This vulnerability affects unknown code of the file /etc/vsftpd.conf of the component vsftpd. This manipulation causes least privilege violation. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized.
🎖@cveNotify
Vulnerability Database
CVE-2026-11554 in CP450
A vulnerability was determined in TOTOLINK CP450 4.1.0cu.747. This vulnerability appears as CVE-2026-11554.
🚨 CVE-2026-11555
A vulnerability was identified in D-Link DGS-1100-08PD 1.00.006. This issue affects some unknown processing of the file /etc/boa.conf of the component Web Interface. Such manipulation leads to least privilege violation. The attack may be launched remotely. The attack requires a high level of complexity. The exploitability is assessed as difficult. The exploit is publicly available and might be used.
🎖@cveNotify
A vulnerability was identified in D-Link DGS-1100-08PD 1.00.006. This issue affects some unknown processing of the file /etc/boa.conf of the component Web Interface. Such manipulation leads to least privilege violation. The attack may be launched remotely. The attack requires a high level of complexity. The exploitability is assessed as difficult. The exploit is publicly available and might be used.
🎖@cveNotify
Vulnerability Database
CVE-2026-11555 in DGS-1100-08PD
A vulnerability was identified in D-Link DGS-1100-08PD 1.00.006. This vulnerability is traded as CVE-2026-11555.