🚨 CVE-2026-55990
In NLnet Labs Unbound 1.7.0 up to and including 1.25.1, when the 'dnscrypt:' clause lists more 'dnscrypt-provider-cert:' files than there are matching 'dnscrypt-secret-key:' files, Unbound fills only the matched prefix and leaves the tail slots at the '0xdb' fill that libsodium's allocator writes into every allocation. Unbound would then iterate over the number of cert files, not the actual slots, so it walks into a slot with garbage data filled with '0xdb' bytes. Any unauthenticated client that sends one UDP datagram of ≥ 68 bytes whose first 8 bytes are '0xdb' to 'dnscrypt-port' will use that garbage entry which leads to a garbage dereference killing the server. This is a silent faulty configuration that goes unnoticed until triggered with the right client query. Unbound needs to be compiled with DNSCrypt support ('--enable-dnscrypt').

🎖@cveNotify

🚨 CVE-2026-55991
In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, a remote unauthenticated client can trigger a libngtcp2 assertion (if compiled with assertions on) and terminate the entire Unbound process using a single DNS-over-QUIC (DoQ) connection and one normal DNS query. This is caused by an erroneous error value passed to libngtcp2. When 'ngtcp2_conn_writev_stream()' returns 'NGTCP2_ERR_STREAM_DATA_BLOCKED', Unbound continues to call 'ngtcp2_ccerr_set_application_error()' with a '-1' error value. The 'int' literal '-1' is implicitly converted to the function's 'uint64_t error_code' parameter as '0xFFFFFFFFFFFFFFFF'. The follow-on 'ngtcp2_conn_write_connection_close()' serialises that value as a QUIC variable-length integer; because '2^64-1' exceeds the 62-bit varint ceiling, 'ngtcp2_put_uvarintlen()' fails 'assert(n < 4611686018427387904ULL)' and the whole resolver process aborts. A remote, unauthenticated DoQ client can trigger this deterministically with a single QUIC connection by advertising 'initial_max_stream_data_bidi_local = 1' in its transport parameters and sending one DoQ query without ever reading the stream.

🎖@cveNotify

🚨 CVE-2026-56416
In NLnet Labs Unbound up to and including version 1.25.1, when the validator builds the canonical RDATA form for an RRSIG-covered PX/RP/MINFO/SOA RRset, it computes the address of the second embedded domain name as 'datstart + dname_valid(datstart, ...)' and passes it straight to 'query_dname_tolower()' without checking that a second name is actually present in the RDATA. The wire-format parser accepts multi-dname RRs whose RDATA ends after the first name, so an attacker who runs a DNSSEC-signed authoritative server can deliver a record with an absent second domain name (e.g. SOA record) and cause 'query_dname_tolower()' to walk label-by-label through stale bytes in the per-worker 'env->scratch_buffer', past the end of that heap allocation if 'msg-buffer-size' has been lowered from the default. This leads to heap buffer overflow and on a release build the outcome relies heavily on the contents of the buffer tail and the adjacent heap chunk.

🎖@cveNotify

🚨 CVE-2026-56444
In NLnet Labs Unbound 1.20.0 up to and including 1.25.1, when Unbound is configured with 'serve-expired: yes' and 'serve-expired-client-timeout > discard-timeout > 0' (contrary to the suggested values), the discard-timeout branch during the serve expired logic drops an aged client reply without performing the correct accounting for the number of reply addresses for the query. Other identical branches outside of serve expired perform the correct decrement. Since the counter is never decremented in such scenario, it can reach the maximum limit and new clients for duplicate in-flight queries are silently dropped resulting in degradation of resolution service. A malicious actor can exploit the vulnerability by querying the resolver for a client-controlled slow-on-demand authoritative zone that can drive the counter past the threshold. Shipped defaults for 'serve-expired-client-timeout: 1800' and 'discard-timeout: 1900' make the branch unreachable.

🎖@cveNotify

🚨 CVE-2026-62144
An authentication bypass vulnerability in Check Point Security Management and Multi-Domain Security Management allows an unauthenticated remote attacker to execute administrative commands on the Management Server. Successful exploitation may also allow command execution on managed Security Gateways. Exploitation requires network access to the Management Server without firewall protection or a configuration that does not restrict Trusted Clients.

🎖@cveNotify

🚨 CVE-2026-62145
A vulnerability in Check Point Gaia Portal allows an authenticated attacker with read-only Gaia Portal privileges to execute commands with root privileges.

🎖@cveNotify

🚨 CVE-2026-10723
BIND may accept incorrect child-zone NSEC3 records as valid, which could allow an attacker to forge authenticated NXDOMAIN responses.
This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.

🎖@cveNotify

🚨 CVE-2026-10822
If BIND encounters a particular invalid data structure in a DNS record, it will accept the invalid data, and may subsequently abort and exit.

BIND will first need to store a DNS record for a key (KEY, DNSKEY, etc.). That key must specify a PRIVATEDNS algorithm (253), and in the algorithm identifier, improperly give a length longer than the actual identifier data. The invalid identifier will be stored. If BIND later needs to render that record to text, it will use the invalid length during processing, leading to a consistency check failing.
This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.

🎖@cveNotify

🚨 CVE-2026-11331
An attacker who knows (or guesses) that a resolver uses RPZ with wildcard CNAME policies can craft query names long enough to trigger a NAMETOOLONG error condition during RPZ processing. This is not handled correctly and may lead to defeating the RPZ rule. It also may lead to an unexpected exit of the BIND 9 software.
This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.16.8-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.

🎖@cveNotify

🚨 CVE-2026-11605
The issue is a resource exhaustion vulnerability associated with DNSSEC validation. BIND always validates all RRSIG records in an answer, even if they are not strictly needed. A query to an authoritative server/zone which returns many valid but superfluous RRSIG records causes the validator to waste disproportionate CPU time.
This issue affects BIND 9 versions 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, and 9.20.9-S1 through 9.20.24-S1.

🎖@cveNotify

🚨 CVE-2026-11622
A DNSSEC validating resolver that is under a random subdomain attack against a DNSSEC-signed zone can suffer from runaway memory usage. The attacker needs to be able to send queries faster than the resolver can perform validation. The increased memory usage can be orders of magnitude beyond the limit configured in the `max-cache-size` parameter.
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.

🎖@cveNotify

🚨 CVE-2026-11721
It is possible for an attacker's zone to respond to a query with an RRSIG that has a smaller number of labels than the zone in which the RRSIG is contained. This causes `named` to produce a wildcard name for a zone that is shorter than the attacker's zone, which can result in cache poisoning. For this attack to have any effect, the resolver under attack must have set `synth-from-dnssec yes;` (which is the default).
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.

🎖@cveNotify

🚨 CVE-2026-12617
The issue is unexpected program termination based on ordering and/or specific content in responses to queries for CNAME or DNAME, and A records. Specifically, if a client queries for a DNAME and A record below the DNAME to the resolver, and the authoritative server responds positively to the A query but delays the DNAME response and later responds negatively, `named` may quit unexpectedly. Or, if a client queries for a CNAME and A record for the same name to the resolver, and the authoritative server responds positively to the A query but delays the CNAME response and later responds with a self-referential CNAME, the same failure may occur.
This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.24, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.

🎖@cveNotify

🚨 CVE-2026-13204
If a provably insecure domain is covered by both an NSEC and NSEC3 record at the parent, and there exist an RRSIG for only one of these types, then BIND may exit unexpectedly with an assertion while validating this proof.
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.

🎖@cveNotify

🚨 CVE-2026-13321
The BIND resolver accepts validly-signed NSEC records where the "Next Domain Name" field points outside the signer's zone.
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.

🎖@cveNotify

🚨 CVE-2026-2395
Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in Xpoda Türkiye Informatics Technology Inc. No Code Platform allows SQL Injection.

This issue affects No Code Platform: from 4.3.1.0 through 20260722. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2026-48029
libheif is a HEIF and AVIF file format decoder and encoder. Versions 1.19.0 through 1.21.2 have a heap OOB read in ImageItem_Grid::decode_grid_tile via irot-induced tile-coordinate underflow. Version 1.22.0 fixes the issue.

🎖@cveNotify

🚨 CVE-2026-16615
A flaw was found in librest. The PKCE implementation for OAuth authorization uses the GRand function from the GLib API, a cryptographically insecure pseudo-random number generator. Because the generated "code verifier" lacks sufficient cryptographic entropy, a malicious actor can reverse-engineer the pseudo-random number generator (PRNG) seed to predict or reconstruct the code verifier string, allowing an attacker to bypass PKCE protections and successfully impersonate the client during the OAuth 2.0 authorization flow.

🎖@cveNotify

🚨 CVE-2026-64830
FFmpeg versions 2.1 through 8.1.2 contains a heap buffer overflow vulnerability in the VobSub subtitle demuxer that allows attackers to corrupt adjacent heap memory by supplying a malicious .sub/.idx subtitle file declaring more distinct stream IDs than the fixed-size array bounds in libavformat/mpeg.c. Attackers can craft a subtitle file with excessive distinct stream IDs to trigger unbounded writes beyond the vobsub->q[] array boundary via ff_subtitles_queue_insert(), potentially achieving arbitrary code execution in any application using FFmpeg's VobSub demuxer.

🎖@cveNotify

🚨 CVE-2026-64831
FFmpeg versions 8.0 through 8.1.2 contains a stack buffer overflow vulnerability in the Vulkan HEVC hardware decoder that allows remote attackers to overwrite return addresses and adjacent stack frames by supplying a crafted HEVC/H.265 bitstream. Attackers can embed a malicious vps_num_hrd_parameters value exceeding HEVC_MAX_SUB_LAYERS in any supported container format to overflow stack-allocated arrays in the vk_hevc_end_frame function, potentially achieving arbitrary code execution.

🎖@cveNotify

🚨 CVE-2026-64832
FFmpeg versions 4.4 through 8.1.2 contain a double-free vulnerability in the NVIDIA NVDEC hardware decoder within libavcodec/nvdec.c that allows attackers to trigger memory corruption by supplying a crafted video file. When no decoder surfaces remain, the ff_nvdec_start_frame_sep_ref error path frees memory via nvdec_fdd_priv_free while the calling layer subsequently frees the same frame description data, resulting in a double-free of the underlying decoder context in any FFmpeg-based application using NVDEC hardware-accelerated decoding.

🎖@cveNotify