🚨 CVE-2026-16318
The QUIC transport parameters extension handler in s2n-tls incorrectly uses s2n_alloc instead of s2n_realloc to store the peer's transport parameters. When a TLS 1.3 connection goes through a HelloRetryRequest, the handler is called twice on the same connection. On the second call, s2n_alloc zeroes the existing pointer before allocating new memory, causing the first allocation to be leaked.



This can occur during normal QUIC traffic when a client offers a key share group the server does not prefer. An unauthenticated user can amplify the issue by deliberately forcing HelloRetryRequests, causing up to approximately 64 KB of unreachable memory per handshake. Over time, this can lead to increased memory consumption on long-running server processes. The unreachable memory is only reclaimed when the process is restarted.



Only server-side QUIC-enabled deployments are affected. Non-QUIC TLS connections are not affected.



We recommend you upgrade s2n-tls to version v1.7.6

🎖@cveNotify

🚨 CVE-2026-47714
libheif is a HEIF and AVIF file format decoder and encoder. In versions 1.21.2 and prior, the inline mask parsing code in `libheif/region.cc` contains an integer overflow. Both `width` and `height` are `unsigned int` (32-bit) values parsed from the HEIF file. Their product can exceed `UINT32_MAX`, wrapping to a small value before the division by 8. This causes an undersized buffer allocation, leading to out-of-bounds memory access when the mask data is later interpreted as a `width x height` bitmap. Version 1.22.0 patches the issue.

🎖@cveNotify

🚨 CVE-2026-56147
Authorization Bypass Through User-Controlled Key (CWE-639) in Kibana can lead to unauthorized information disclosure and case attachment integrity compromise via Privilege Abuse (CAPEC-122). An inconsistency in Kibana's file access authorization logic allows a low-privileged authenticated user to retrieve, modify, and delete case attachments that belong to feature areas they are not authorized to access. Because the access control check and the resource retrieval use different resolution mechanisms, an authenticated attacker with limited file management permissions can obtain the contents of, modify, or delete protected case attachments — such as those associated with Security Solution cases — without holding the privileges required to access those features.

🎖@cveNotify

🚨 CVE-2026-63136
Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead to denial of service via Excessive Allocation (CAPEC-130). A user with search privileges can submit a specially crafted search request that causes a data node to exhaust available heap memory, resulting in node unavailability and cluster degradation. An attacker could leverage this vulnerability to cause cluster downtime requiring manual intervention to restore service.

🎖@cveNotify

🚨 CVE-2026-63139
Uncontrolled Resource Consumption (CWE-400) in Kibana can lead to denial of service via Excessive Allocation (CAPEC-130). An authenticated low-privileged user can exploit an uncontrolled resource consumption vulnerability in Kibana's Canvas functionality by sending a specially crafted request, causing the Kibana server process to terminate and resulting in a denial of service for all users of the affected Kibana instance.

🎖@cveNotify

🚨 CVE-2026-63140
Reachable Assertion (CWE-617) in Elasticsearch can lead to denial of service via Input Data Manipulation (CAPEC-153). A specially crafted search request containing a null value in a specific query clause causes an internal assertion to be raised during query parsing. Because Elasticsearch treats assertion failures as fatal errors, this terminates the affected node process. A low-privileged authenticated user with read access to at least one index can exploit this condition with a single request to cause a node to terminate, disrupting search availability. In a single-node deployment this fully stops Elasticsearch; in a multi-node cluster it reduces cluster capacity for each affected node.

🎖@cveNotify

🚨 CVE-2026-63358
FileGator accepts arbitrary Unix permission values via the '/chmoditems' API endpoint and passes the value directly to PHP's native 'chmod()' function through 'octdec()' conversion, with no validation. This allows an authenticated user with 'chmod' permission to upgrade their privileges to root.

🎖@cveNotify

🚨 CVE-2026-64881
The audit file upload handler does not sanitize filenames, allowing shell metacharacters to flow into system command execution. This input validation failure enables command injection when chained with a related vulnerability.

🎖@cveNotify

🚨 CVE-2026-65058
Trezor Safe 3, Safe 5, and Safe 7 firmware contains a confirmation-binding flaw in the Ethereum sign_tx / sign_tx_eip1559 flow. For contract interactions, the device confirms only the initial calldata chunk while the signature commits to the full streamed calldata. An attacker could present calldata to a victim then supply a different tail that changes the signed transaction. Fixed in 70c9b0c.

🎖@cveNotify

🚨 CVE-2026-8982
Two undocumented privileged accounts exist in Autel Maxi Charger Single firmware through V1.03.51. The accounts use vendor-defined password derivation mechanisms based on device-specific values, allowing an attacker with knowledge of the algorithm and required inputs to authenticate to the web management interface with administrative privileges.

🎖@cveNotify

🚨 CVE-2026-8983
Autel Maxi Charger Single firmware through V1.03.51 contains a hard-coded authentication token that bypasses authorization checks for multiple management endpoints. An attacker can supply the special token value to invoke privileged functionality without valid authentication.

🎖@cveNotify

🚨 CVE-2026-10674
The NXP LPUART serial driver (drivers/serial/uart_mcux_lpuart.c), when CONFIG_UART_USE_RUNTIME_CONFIGURE is enabled, called LPUART_Deinit() at the start of mcux_lpuart_configure(), which disables the LPUART peripheral clocks. The requested configuration is validated only afterwards (in mcux_lpuart_configure_basic), and unsupported parity/data-bit/stop-bit/flow-control values return -ENOTSUP before the clock is re-enabled.

As a result, a uart_configure() request with an unsupported configuration left the LPUART in a clock-disabled state; any subsequent access to LPUART registers (poll_out/poll_in, interrupt handling, or a later reconfigure) faults on the gated peripheral and escalates to a hard fault, crashing the system.

uart_configure() is a Zephyr syscall whose verifier (z_vrfy_uart_configure) only checks that cfg is readable user memory and forwards the caller-supplied configuration unchanged, so an unprivileged userspace thread with access to an LPUART device can deterministically trigger the fault, a persistent system-wide denial of service.

Introduced in v2.5.0 and present in all subsequent releases until this fix, which removes the LPUART_Deinit() call and instead only disables the transmitter/receiver, leaving the clock running.

🎖@cveNotify

🚨 CVE-2026-10675
In Zephyr's Bluetooth Mesh PB-ADV provisioning bearer (subsys/bluetooth/mesh/pb_adv.c), prov_msg_recv() rescheduled the provisioning protocol watchdog timer unconditionally at the top of the function, before the FCS check and before the ADV_LINK_INVALID check. Once a provisioning attempt fails, prov_failed() sets ADV_LINK_INVALID and the only recovery path is the protocol timer firing (protocol_timeout -> prov_link_close -> close_link -> reset_adv_link and re-enabling of scanning and the unprovisioned device beacon).

A remote, unauthenticated attacker on the BLE advertising channel can first induce a provisioning failure (e.g. with a malformed generic-provisioning PDU) and then transmit any FCS-valid PB-ADV transaction PDU on the same link ID more often than once per protocol timeout (60 s, or 120 s for OOB input/output). Because each such packet reset the timer even on an invalidated link, protocol_timeout never fired, the dead link was never torn down, and the device remained pinned in an un-provisionable state with its unprovisioned beacon disabled and new Link Open requests rejected.

PB-ADV PDUs are processed without authentication and the FCS is a keyless CRC, so no pairing or prior trust is required and the attacker chooses the link ID itself. The impact is a persistent denial of provisioning/re-provisioning service; there is no memory-safety, confidentiality, or integrity impact.

The vulnerable code shipped in releases through v4.4.1. The fix moves the timer reschedule to after the ADV_LINK_INVALID check (and the FCS check before the reset) so an invalidated link can no longer be kept alive by incoming packets.

🎖@cveNotify

🚨 CVE-2026-10677
The CONFIG_USERSPACE syscall verifier z_vrfy_k_poll() in kernel/poll.c allocates a kernel-side copy of the user-supplied k_poll_event[] via z_thread_malloc() and then validates each event's object handle. Before this fix, validation used K_OOPS(K_SYSCALL_OBJ(...)) inline inside the loop, which kills the calling thread without freeing events_copy.

A user thread can pass num_events >= 1 with a forged object handle to leak the allocation; because newly spawned user threads inherit the parent's resource_pool (kernel/thread.c), an attacker spawns sacrificial threads to repeat the leak until the shared kernel heap is exhausted. Once depleted, legitimate kernel allocations from that pool (k_queue alloc nodes, k_msgq buffers, future k_poll calls, etc.) fail, causing a system-level denial of service.

The fix replaces each inline K_OOPS with a conditional goto oops_free so the buffer is freed before the thread is killed. Affects Zephyr releases from v1.12.0 (when k_poll was first exposed to user mode) through v4.4.1.

🎖@cveNotify

🚨 CVE-2026-10678
The MCTP-over-I2C+GPIO target binding in Zephyr (subsys/pmci/mctp/mctp_i2c_gpio_target.c) processes pseudo-register writes from an I2C bus master byte-by-byte in mctp_i2c_gpio_target_write_received() without validating the order or the receive buffer. In the affected versions the MCTP_I2C_GPIO_RX_MSG_ADDR (data) handler dereferences and writes through b->rx_pkt without checking that the receive buffer was allocated: a controller that selects the data register and writes a byte without first sending the length register (which is what allocates the buffer) causes a write of an attacker-chosen byte through a NULL/unallocated mctp_pktbuf pointer (i.e. into a small attacker-advanceable offset above address 0), producing memory corruption or a hard fault.

The same handler also performs a write-then-check bounds test, allowing a one-byte heap overflow at data[255] when more than 255 data bytes are sent.

Because the I2C target callback is invoked with raw bytes supplied by whatever device is the bus master and the binding performs no authentication, a malicious or malfunctioning controller on the bus can trigger these without any prior protocol state, leading to memory corruption and/or denial of service on the target device.

The vulnerable code was introduced when the I2C+GPIO target binding was added and shipped in Zephyr v4.3.0 and v4.4.0. The fix defers allocation to the first data byte with a NULL check, treats a missing length as a zero-sized packet rejected by libmctp, and moves the bounds check before the store.

🎖@cveNotify

🚨 CVE-2026-10679
The DesignWare SPI driver (drivers/spi/spi_dw.c) computed the SPI BAUDR clock divider as info->clock_frequency / config->frequency without validating config->frequency.

spi_transceive is a Zephyr __syscall and its verify handler (drivers/spi/spi_handlers.c) copies the caller-supplied spi_config from userspace without checking the frequency field, so a userspace thread that has been granted access to a DesignWare SPI device kernel object can pass frequency = 0 and trigger an unsigned integer divide-by-zero in spi_dw_configure().

On Cortex-M Mainline (SCB->CCR.DIV_0_TRP is set in z_arm_fault_init()) and on ARC (a dedicated __ev_div_zero vector) this raises a CPU exception, resulting in a kernel fault and local denial of service.

The fix rejects zero frequency and frequencies above clock_frequency / 2 (the DesignWare SSI databook minimum SCKDIV of 2) with -EINVAL. The defect affects all Zephyr releases up to and including v4.4.0; exploitation requires CONFIG_USERSPACE=y and an unprivileged thread already granted SPI driver permission. There is no memory-corruption or information-disclosure impact.

🎖@cveNotify

🚨 CVE-2026-47178
libheif is a HEIF and AVIF file format decoder and encoder. In versions 1.19.0 through 1.21.2, a crafted HEIF file (uncompressed `unci` codec, tiled, component-interleaved, 4:2:0) triggers a heap out-of-bounds write in libheif's uncompressed tile decoder. The write overwrites the C++ vtable pointer of an adjacent `unc_decoder_component_interleave` object; the next virtual call dispatches to an attacker-chosen address. Version 1.22.0 patches the issue.

🎖@cveNotify

🚨 CVE-2026-47247
libheif is a HEIF and AVIF file format decoder and encoder. Prior to version 1.22.0, two bugs in libheif chain to leak process heap memory as visible pixel values in decoded grid images. An attacker who uploads a crafted AVIF/HEIC file to any server-side image processor (WordPress, Sharp/libvips, ImageMagick, etc.) can recover heap data - including library function pointers sufficient to defeat ASLR, or any other secret - from the publicly-downloadable transcoded JPEG/PNG/WebP output. Local attack vectors are also possible. Version 1.22.0 fixes the issue.

🎖@cveNotify

🚨 CVE-2026-47251
libheif is a HEIF and AVIF file format decoder and encoder. The fix for CVE-2026-3949 (commit `b97c8b5`, PR #1712) introduced an integer overflow in the very security check it added. The check itself can be bypassed, allowing a crafted HEIF file with a VVC track to trigger the same out-of-bounds heap read that CVE-2026-3949 was meant to prevent. This is a separate, currently-unpatched vulnerability. Issue #1712 was closed as fixed without testing the edge case where `size` is near `UINT32_MAX`. Version 1.22.0 patches the issue.

🎖@cveNotify

🚨 CVE-2026-47254
libheif is a HEIF and AVIF file format decoder and encoder. Prior to version 1.22.0, `Track::init_sample_timing_table()` in `libheif/sequences/track.cc` stores an out-of-bounds chunk index (`m_chunks.size()`) into `m_presentation_timeline` when the number of chunks defined in the `stco` box is less than the number of samples in `stsz`. A subsequent call to `heif_track_get_next_raw_sequence_sample()` reads `m_chunks[chunk_idx]` with that OOB index, causing a heap-buffer-overflow. Version 1.22.0 fixes the issue.

🎖@cveNotify

🚨 CVE-2026-47709
libheif is a HEIF and AVIF file format decoder and encoder. Versions prior to 1.22.0 crashes in the public C API `heif_image_handle_get_image_tiling()` when a malformed uncompressed HEIF image item has an associated `uncC` property but no associated `ispe` property. In debug builds this trips the `ispe && uncC` assertion in `ImageItem_uncompressed::get_heif_image_tiling()`. In a release/NDEBUG ASan build, the same file causes a null pointer read at address `0xa8`. Version 1.22.0 fixes the issue.

🎖@cveNotify