🚨 CVE-2026-35716
A stack-based buffer overflow in the motion_privacy.cgi binary in VIVOTEK FD8136 firmware FD8136-VVTK-0300a allows authenticated remote attackers to execute arbitrary code as root via an oversized n1 parameter in a POST request to the /cgi-bin/admin/setpm.cgi, /cgi-bin/admin/setmd.cgi, or /cgi-bin/admin/setmd_profile.cgi endpoint (all symlinks to the same binary). The parameter value is copied into a fixed-size 0xa4-byte stack buffer without bounds checking, overwriting the saved link register. The binary is compiled without stack canaries.

🎖@cveNotify

🚨 CVE-2026-35718
A path traversal vulnerability in the /admin/downloadMedias.cgi endpoint of VIVOTEK INC FD8136-VVTK firmware 0300a allows authenticated attackers to read any file on the device via sending a crafted request.

🎖@cveNotify

🚨 CVE-2026-38978
transmission through 4.1.1 was found to have a clickjacking weakness in the browser-facing WebUI and RPC response paths.

🎖@cveNotify

🚨 CVE-2026-40619
A high security vulnerability affecting Security Center main server installations has been identified. It could allow an attacker with local OS privileges to the main server to access the Server Admin credentials. A third party hired by Genetec found the issue. There is currently no evidence of active exploitation.

This vulnerability is associated with specific installation package builds rather than the product version identifier alone. Certain versions (including 5.10.4.0, 5.11.3.0, 5.12.2.0 and 5.13.3.0) were released with both vulnerable and remediated installation packages under the same version number.

Consequently, version-based comparison alone is insufficient to determine exposure. Only installations performed using vulnerable builds are affected. Remediated builds can be distinguished using verified installation package hashes. For the complete list of fixed build hashes, refer to the security advisory section.

🎖@cveNotify

🚨 CVE-2026-40780
Authentication Bypass Using an Alternate Path or Channel vulnerability in Liquid Web / StellarWP BookIt allows Password Recovery Exploitation.

This issue affects BookIt: from n/a before 2.5.4.1.

🎖@cveNotify

🚨 CVE-2026-42654
Authentication Bypass Using an Alternate Path or Channel vulnerability in WP Swings Wallet System for WooCommerce allows Password Recovery Exploitation.

This issue affects Wallet System for WooCommerce: from n/a through 2.7.5.

🎖@cveNotify

🚨 CVE-2026-44367
Klaw is a self-service Apache Kafka Topic Management/Governance tool/portal. Prior to version 2.10.4, a vulnerability exists in the user registration and login mechanisms due to inconsistent handling of username case sensitivity, leading to a targeted Denial of Service (DoS) and complete account lockout. This issue has been patched in version 2.10.4.

🎖@cveNotify

🚨 CVE-2026-45080
Klaw is a self-service Apache Kafka Topic Management/Governance tool/portal. Prior to version 2.10.4, improper access control allows disclosure of password hash. This issue has been patched in version 2.10.4.

🎖@cveNotify

🚨 CVE-2026-45553
NiceGUI is a Python-based UI framework. Prior to version 3.12.0, ui.restructured_text() renders reStructuredText server-side with Docutils without disabling file insertion directives. When a NiceGUI application passes attacker-controlled content to ui.restructured_text(), an attacker can use standard Docutils directives (include, csv-table with :file:, raw with :file:) to read local files readable by the NiceGUI server process. Applications that only pass trusted static strings to ui.restructured_text() are not affected. This issue has been patched in version 3.12.0.

🎖@cveNotify

🚨 CVE-2026-45554
NiceGUI is a Python-based UI framework. Prior to version 3.12.0, two FastAPI routes that serve per-component static assets in NiceGUI accept a sub-path parameter that may resolve to a directory rather than a file. Requests that resolve to a directory raise an unhandled RuntimeError inside Starlette's FileResponse, which Uvicorn writes to the server log as a full traceback. Because the routes are reachable without authentication, a remote attacker can amplify log volume and consume disk and log-pipeline capacity on any publicly reachable NiceGUI server. This issue has been patched in version 3.12.0.

🎖@cveNotify

🚨 CVE-2026-45676
OpenTelemetry eBPF Instrumentation provides eBPF instrumentation based on the OpenTelemetry standard. Prior to version 0.9.0, OBI's replacement ELF parser trusts section offsets, counts, and string offsets from the executable file. A crafted local ELF can make OBI dereference invalid section pointers or slice past string tables, causing the agent to panic while determining the process language. This issue has been patched in version 0.9.0.

🎖@cveNotify

🚨 CVE-2026-45678
OpenTelemetry eBPF Instrumentation provides eBPF instrumentation based on the OpenTelemetry standard. Prior to version 0.9.0, the Postgres protocol parser assumes BIND message payloads contain a valid NUL-terminated portal name. A crafted empty or unterminated payload can make OBI slice beyond the end of the captured buffer and panic. This issue has been patched in version 0.9.0.

🎖@cveNotify

🚨 CVE-2026-45679
OpenTelemetry eBPF Instrumentation provides eBPF instrumentation based on the OpenTelemetry standard. Prior to version 0.9.0, OBI exports raw Redis error text as the span status message. Because Redis error replies can contain attacker-controlled or sensitive values, this behavior can exfiltrate tokens, PII, or other confidential input into telemetry backends and inject untrusted text into downstream analysis systems. This issue has been patched in version 0.9.0.

🎖@cveNotify

🚨 CVE-2026-45680
OpenTelemetry eBPF Instrumentation provides eBPF instrumentation based on the OpenTelemetry standard. Prior to version 0.9.0, OBI replays BPF probe hits into histogram observations by looping once per recorded run count. On busy systems, the run-count delta can become very large, causing the metrics exporter to spend excessive CPU time in a tight loop every collection interval. This issue has been patched in version 0.9.0.

🎖@cveNotify

🚨 CVE-2026-45681
OpenTelemetry eBPF Instrumentation provides eBPF instrumentation based on the OpenTelemetry standard. Prior to version 0.9.0, the per-CPU message-buffer fallback path uses a 256-byte backup buffer but preserves the original payload size, which can be up to 8KB. If a CPU mismatch occurs, OBI can read beyond the fallback buffer and leak adjacent memory into telemetry. This issue has been patched in version 0.9.0.

🎖@cveNotify

🚨 CVE-2026-45683
OpenTelemetry eBPF Instrumentation provides eBPF instrumentation based on the OpenTelemetry standard. Prior to version 0.9.0, the Java TLS ioctl probe reads user-controlled ioctl pointers with bpf_probe_read instead of bpf_probe_read_user. An instrumented local process can therefore point OBI at kernel memory and cause that memory to be copied into telemetry. This issue has been patched in version 0.9.0.

🎖@cveNotify

🚨 CVE-2026-45684
OpenTelemetry eBPF Instrumentation provides eBPF instrumentation based on the OpenTelemetry standard. From version 0.7.0 to before version 0.9.0, OBI's log enricher mishandles writev buffers by reading only the first iovec entry but using the total iov_iter.count as the copy length. When log injection is enabled, a crafted multi-segment writev call can make OBI read and overwrite memory beyond the first segment. This issue has been patched in version 0.9.0.

🎖@cveNotify

🚨 CVE-2026-45685
OpenTelemetry eBPF Instrumentation provides eBPF instrumentation based on the OpenTelemetry standard. From version 0.1.0 to before version 0.9.0, malformed MongoDB wire messages can trigger uncaught panics in the MongoDB TCP parser, allowing a remote unauthenticated attacker to crash the telemetry agent and cause a denial of service. The parser operates on raw attacker-controlled network payloads before the input is fully validated, so a single crafted message can terminate telemetry collection for the affected process or node. This issue has been patched in version 0.9.0.

🎖@cveNotify

🚨 CVE-2026-45686
OpenTelemetry eBPF Instrumentation provides eBPF instrumentation based on the OpenTelemetry standard. From version 0.7.0 to before version 0.9.0, a remotely reachable integer overflow in OBI's memcached text protocol parser can crash the OBI process and cause denial of service. When parsing memcached storage commands such as set, add, replace, append, prepend, or cas, OBI accepts extremely large <bytes> values and adds the payload delimiter length without checking for overflow. A crafted request with <bytes> set to math.MaxInt or math.MaxInt-1 causes the computed payload length to wrap negative and triggers a runtime panic in LargeBufferReader.Peek. This issue has been patched in version 0.9.0.

🎖@cveNotify

🚨 CVE-2026-47117
OpenMed before 1.5.2 contains a remote code execution vulnerability in the PII privacy-filter model loading path. The privacy-filter dispatcher used broad substring matching on the user-supplied model_name parameter, allowing a value such as attacker/foo-privacy-filter-bar to route through a path that loads Hugging Face models with trust_remote_code=True. An unauthenticated attacker can supply a malicious model repository containing custom Transformers code via auto_map in config.json or tokenizer_config.json, which is imported and executed with the privileges of the OpenMed service process.

🎖@cveNotify

🚨 CVE-2026-48861
Improper Neutralization of CRLF Sequences ('CRLF Injection') vulnerability in elixir-mint Mint allows HTTP Request Splitting and HTTP Request Smuggling.

In lib/mint/http1/request.ex, the encode_request_line/2 function splices the caller-supplied method and target arguments directly into the HTTP/1 request line without any character validation: [method, ?\s, target, " HTTP/1.1\r\n"]. An application that forwards attacker-controlled input as the HTTP method or target to Mint.HTTP.request/5 is therefore exposed to request-line CRLF injection: the attacker can terminate the request line early, inject arbitrary headers, and smuggle an entirely separate pipelined HTTP request onto the same TCP connection.

Mint 1.7.0 introduced validate_request_target/2, which rejects CRLF and other control characters in the target by default and closes the path/query vector unless the caller opts out via skip_target_validation: true. The method field remains unvalidated, so the method-based injection is exploitable under the default Mint configuration on all versions.

This issue affects mint: from 0.1.0 before 1.9.0.

🎖@cveNotify