🚨 CVE-2026-42151
Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the client_secret field in the Azure AD remote write OAuth configuration (storage/remote/azuread) was typed as string instead of Secret. Prometheus redacts fields of type Secret when serving the configuration via the /-/config HTTP API endpoint. Because the field was a plain string, the Azure OAuth client secret was exposed in plaintext to any user or process with access to that endpoint. This issue has been patched in versions 3.5.3 and 3.11.3.

🎖@cveNotify

🚨 CVE-2026-42154
Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the remote read endpoint (/api/v1/read) does not validate the declared decoded length in a snappy-compressed request body before allocating memory. An unauthenticated attacker can send a small payload that causes a huge heap allocation per request. Under concurrent load this can exhaust available memory and crash the Prometheus process. This issue has been patched in versions 3.5.3 and 3.11.3.

🎖@cveNotify

🚨 CVE-2026-43869
Improper Validation of Certificate with Host Mismatch vulnerability in Apache Thrift.

This issue affects Apache Thrift: before 0.23.0.

Users are recommended to upgrade to version 0.23.0, which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-6322
fast-uri normalize() decoded percent-encoded authority delimiters inside the host component and then re-emitted them as raw delimiters during serialization. A host that combined an allowed domain, an encoded at-sign, and a different domain was re-emitted with the at-sign as a raw userinfo separator, changing the URI's authority to the second domain. Applications that normalize untrusted URLs before host allowlist checks, redirect validation, or outbound request routing can be steered to a different authority than the input appeared to specify. Versions <= 3.1.1 are affected. Update to 3.1.2 or later.

🎖@cveNotify

🚨 CVE-2026-35397
Jupyter Server is the backend for Jupyter web applications. In versions 2.17.0 and earlier, a path traversal vulnerability in the REST API allows an authenticated user to escape the configured root_dir and access sibling directories whose names begin with the same prefix as the root_dir. For example, with a root_dir named "test", the API permits access to a sibling directory named "testtest" through a crafted request to the /api/contents endpoint using encoded path components. An attacker can read, write, and delete files in affected sibling directories. Multi-tenant deployments using predictable naming schemes are particularly at risk, as a user with a directory named "user1" could access directories for user10 through user19 and beyond. A user who can choose a single-character folder name could gain access to a significant number of sibling directories.

Version 2.18.0 contains a fix. As a workaround, ensure folder names do not share a common prefix with any sibling directory.

🎖@cveNotify

🚨 CVE-2026-40110
Jupyter Server is the backend for Jupyter web applications. In versions 2.17.0 and earlier, the Origin header validation uses Python's re.match() to check incoming origins against the allow_origin_pat configuration value. Because re.match() only anchors at the start of the string and does not require a full match, a pattern intended to match only a trusted domain (e.g., trusted.example.com) will also match any origin that begins with that domain followed by additional characters (e.g., trusted.example.com.evil.com). An attacker who controls such a domain can bypass the CORS origin restriction and make cross-origin requests to the Jupyter Server API from an untrusted site. This issue has been fixed in version 2.18.0.

🎖@cveNotify

🚨 CVE-2026-43112
In the Linux kernel, the following vulnerability has been resolved:

fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath

When cifs_sanitize_prepath is called with an empty string or a string
containing only delimiters (e.g., "/"), the current logic attempts to
check *(cursor2 - 1) before cursor2 has advanced. This results in an
out-of-bounds read.

This patch adds an early exit check after stripping prepended
delimiters. If no path content remains, the function returns NULL.

The bug was identified via manual audit and verified using a
standalone test case compiled with AddressSanitizer, which
triggered a SEGV on affected inputs.

🎖@cveNotify

🚨 CVE-2026-33079
In versions 3.0.0a1 through 3.2.0 of Mistune, there is a ReDoS (Regular Expression Denial of Service) vulnerability in `LINK_TITLE_RE` that allows an attacker who can supply Markdown for parsing to cause denial of service. The regular expression used for parsing link titles contains overlapping alternatives that can trigger catastrophic backtracking. In both the double-quoted and single-quoted branches, a backslash followed by punctuation can be matched either as an escaped punctuation sequence or as two ordinary characters, creating an ambiguous pattern inside a repeated group. If an attacker supplies Markdown containing repeated ! sequences with no closing quote, the regex engine explores an exponential number of backtracking paths. This is reachable through normal Markdown parsing of inline links and block link reference definitions. A small crafted input can therefore cause significant CPU consumption and make applications using Mistune unresponsive.

🎖@cveNotify

🚨 CVE-2026-41674
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. In @xmldom/xmldom prior to versions 0.9.10 and 0.8.13 and xmldom version 0.6.0 and prior, the package serializes DocumentType node fields (internalSubset, publicId, systemId) verbatim without any escaping or validation. When these fields are set programmatically to attacker-controlled strings, XMLSerializer.serializeToString can produce output where the DOCTYPE declaration is terminated early and arbitrary markup appears outside it. This issue has been patched in versions @xmldom/xmldom versions 0.9.10 and 0.8.13.

🎖@cveNotify

🚨 CVE-2026-8091
Incorrect boundary conditions in the Audio/Video: Playback component. This vulnerability was fixed in Firefox 150, Thunderbird 150, Firefox ESR 140.10.1, Thunderbird 140.10.1, and Firefox ESR 115.35.2.

🎖@cveNotify

🚨 CVE-2026-39820
Well-crafted inputs reaching ParseAddress, ParseAddressList, and ParseDate were able to trigger excessive CPU exhaustion and memory allocations.

🎖@cveNotify

🚨 CVE-2026-42499
Pathological inputs could cause DoS through consumePhrase when parsing an email address according to RFC 5322.

🎖@cveNotify

🚨 CVE-2026-43329
In the Linux kernel, the following vulnerability has been resolved:

netfilter: flowtable: strictly check for maximum number of actions

The maximum number of flowtable hardware offload actions in IPv6 is:

* ethernet mangling (4 payload actions, 2 for each ethernet address)
* SNAT (4 payload actions)
* DNAT (4 payload actions)
* Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing)
for QinQ.
* Redirect (1 action)

Which makes 17, while the maximum is 16. But act_ct supports for tunnels
actions too. Note that payload action operates at 32-bit word level, so
mangling an IPv6 address takes 4 payload actions.

Update flow_action_entry_next() calls to check for the maximum number of
supported actions.

While at it, rise the maximum number of actions per flow from 16 to 24
so this works fine with IPv6 setups.

🎖@cveNotify

🚨 CVE-2026-42258
Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Prior to versions 0.4.24, 0.5.14, and 0.6.4, symbol arguments to commands are vulnerable to a CRLF Injection / IMAP Command injection via Symbol arguments passed to IMAP commands. This issue has been patched in versions 0.4.24, 0.5.14, and 0.6.4.

🎖@cveNotify

🚨 CVE-2026-6722
In PHP versions 8.2.* before 8.2.31, 8.3.* before 8.3.31, 8.4.* before 8.4.21, and 8.5.* before 8.5.6, the SOAP extension's object deduplication mechanism stores pointers to PHP objects in a global map without incrementing their reference counts. When an apache:Map node contains duplicate keys, processing the second entry overwrites the first in the temporary result map, freeing the original PHP object while its stale pointer remains in the map. A subsequent href reference to the freed node can copy the dangling pointer into the result. As PHP string allocations can reclaim the freed memory region, an attacker with control over the SOAP request body can exploit this use-after-free to achieve remote code execution.

🎖@cveNotify

🚨 CVE-2026-42266
JupyterLab is an extensible environment for interactive and reproducible computing, based on the Jupyter Notebook Architecture. From 4.0.0 to 4.5.6, the allow-list of extensions that can be installed from PyPI Extension Manager (allowed_extensions_uris) is not correctly enforced by JupyterLab. The PyPI Extension Manager was not contained to packages listed on the default PyPI index. This vulnerability is fixed in 4.5.7.

🎖@cveNotify

🚨 CVE-2026-42557
jupyterlab is an extensible environment for interactive and reproducible computing, based on the Jupyter Notebook Architecture. Prior to 4.5.7, JupyterLab's HTML sanitizer allowlists data-commandlinker-command and data-commandlinker-args on button elements, while CommandLinker listens for all click events on document.body and executes the named command without checking whether the element came from trusted JupyterLab UI. A notebook with a pre-saved HTML cell output containing a deceptive button can trigger arbitrary JupyterLab commands - including arbitrary code execution - on a single user click, without any code being submitted for execution by the user. This vulnerability is fixed in 4.5.7.

🎖@cveNotify

🚨 CVE-2026-44293
protobufjs compiles protobuf definitions into JavaScript (JS) functions. Prior to 7.5.6 and 8.0.2, protobufjs generated JavaScript for toObject conversion could include an unsafe expression derived from a schema-controlled bytes field default value. A crafted descriptor with a non-string default value for a bytes field could cause attacker-controlled code to be emitted into the generated conversion function. This vulnerability is fixed in 7.5.6 and 8.0.2.

🎖@cveNotify

🚨 CVE-2026-44432
urllib3 is an HTTP client library for Python. From 2.6.0 to before 2.7.0, urllib3 could decompress the whole response instead of the requested portion (1) during the second HTTPResponse.read(amt=N) call when the response was decompressed using the official Brotli library or (2) when HTTPResponse.drain_conn() was called after the response had been read and decompressed partially (compression algorithm did not matter here). These issues could cause urllib3 to fully decode a small amount of highly compressed data in a single operation. This could result in excessive resource consumption (high CPU usage and massive memory allocation for the decompressed data) on the client side. This vulnerability is fixed in 2.7.0.

🎖@cveNotify

🚨 CVE-2026-42587
Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, HttpContentDecompressor accepts a maxAllocation parameter to limit decompression buffer size and prevent decompression bomb attacks. This limit is correctly enforced for gzip and deflate encodings via ZlibDecoder, but is silently ignored when the content encoding is br (Brotli), zstd, or snappy. An attacker can bypass the configured decompression limit by sending a compressed payload with Content-Encoding: br instead of Content-Encoding: gzip, causing unbounded memory allocation and out-of-memory denial of service. The same vulnerability exists in DelegatingDecompressorFrameListener for HTTP/2 connections. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final.

🎖@cveNotify

🚨 CVE-2026-42561
Python-Multipart is a streaming multipart parser for Python. Prior to 0.0.27, python-multipart has a denial of service vulnerability in multipart part header parsing. When parsing multipart/form-data, MultipartParser previously had no limit on the number of part headers or the size of an individual part header. An attacker could send a request with either many repeated headers without terminating the header block or a single very large header value, causing excessive CPU work before request rejection or completion. This vulnerability is fixed in 0.0.27.

🎖@cveNotify