CVE Notify
19.5K subscribers
4 photos
232K links
Alert on the latest CVEs

Partner channel: @malwr
Download Telegram
🚨 CVE-2026-42218
xrdp is an open source RDP server. Versions 0.10.6 and prior contain a timing side-channel vulnerability in the login interface. Due to a discrepancy in response processing times, a remote attacker can infer the existence of a username on the system, leading to unauthorized information disclosure via username enumeration. This issue has been fixed in version 0.10.6.1.

πŸŽ–@cveNotify
🚨 CVE-2026-44178
xrdp is an open source RDP server. Versions 0.10.6 and prior contain a heap-based buffer overflow vulnerability within the virtual channel forwarding mechanism. When forwarding data from a remote client to the internal channel server, the xrdp process utilizes a fixed-size buffer without adequate bounds checking on the incoming payload. An authenticated remote attacker can exploit this flaw by sending a specially crafted virtual channel message that exceeds the buffer capacity, leading to heap memory corruption. This may result in a denial of service or the execution of arbitrary code with the privileges of the xrdp process. This issue has been fixed in version 0.10.6.1.

πŸŽ–@cveNotify
🚨 CVE-2026-44978
xrdp is an open source RDP server. Versions 0.10.6 and prior contain a heap out-of-bounds read vulnerability within the FIPS-specific receive paths. This vulnerability does not affect the default configuration of xrdp. The vulnerability is only exploitable when the security layer is set to security_layer=negotiate or security_layer=rdp, and the crypto level is changed to crypt_level=fips in xrdp.ini. In this specific non-default mode, the server fails to validate the FIPS padding length field, leading to a pointer underflow and a subsequent negative length calculation. An unauthenticated remote attacker can exploit this by sending a crafted FIPS-protected PDU, causing a heap out-of-bounds read that results in a process crash and denial of service (DoS). However, since xrdp forks a new process for each connection by default, an out-of-bounds read causing a process crash is unlikely to bring down the entire xrdp service. This issue has been fixed in version 0.10.6.1.

πŸŽ–@cveNotify
🚨 CVE-2026-54538
xrdp is an open source RDP server. In versions 0.10.6 and prior, a n issue was discovered where the software fails to properly validate the totalLength field within the RDP protocol control header during packet reception. An unauthenticated remote attacker can exploit this vulnerability by sending a specially crafted packet that forces the xrdp process or thread into an infinite, CPU-bound loop. Because the internal pointer fails to advance and the deadlock prevention mechanism is bypassed for specific protocol data unit types, the process consumes excessive CPU resources indefinitely. This can render the xrdp service unavailable and potentially lead to system-wide resource exhaustion if multiple malicious connections are established. This issue has been fixed in version 0.10.6.1.

πŸŽ–@cveNotify
🚨 CVE-2026-55238
xrdp is an open source RDP server. Versions 0.10.6 and prior contain a vulnerability concerning the processing of RDP Confirm Active PDU, where during the capability negotiation phase, the parser did not perform sufficient length validation for specific capability sets. A remote, unauthenticated attacker could potentially exploit this flaw by sending a specially crafted RDP packet containing malformed capability data. Due to missing bounds checks, the xrdp process may perform out-of-bounds memory reads, which can result in the termination of the service (Denial of Service). However, since xrdp forks a new process for each connection by default, an out-of-bounds read causing a process crash is unlikely to bring down the entire xrdp service. This issue has been fixed in version 0.10.6.1.

πŸŽ–@cveNotify
🚨 CVE-2026-55645
xrdp is an open source RDP server. Versions 0.10.6 and prior contain a vulnerability concerning the processing of Client Control PDUs. During the RDP connection sequence, the parser does not perform sufficient length validation before reading specific data fields from the network stream. A remote, unauthenticated attacker could potentially exploit this flaw by sending a specially crafted, truncated Client Control PDU. Due to missing bounds checks, the xrdp process may perform out-of-bounds memory reads, which can result in the termination of the service (Denial of Service). However, since xrdp forks a new process for each connection by default, an out-of-bounds read causing a process crash is unlikely to bring down the entire xrdp service.This issue has been fixed in version 0.10.6.1.

πŸŽ–@cveNotify
🚨 CVE-2026-58413
Network-AI is a TypeScript/Node.js multi-agent orchestrator. Prior to version 5.12.2, `EnvironmentManager.restore(env, backupId)` computes the backup path with `join(envDir, '.backups', backupId)` and only checks that this path exists. It does not resolve the result or verify that it remains under `data/<env>/.backups`. A caller can pass a traversal backup ID such as `../../../outside/source-dir` to restore files from an arbitrary directory into the target environment data directory. The issue is fixed in v5.12.2. `restore()` now validates `backupId` against `/^[\w\-]+$/` and asserts `dirname(resolve(join(backupsDir, backupId))) === resolve(backupsDir)` before touching the filesystem. Backup IDs containing path separators or `..` are rejected, so a crafted ID can no longer copy directories from outside `.backups/` into the environment.

πŸŽ–@cveNotify
🚨 CVE-2026-58414
Network-AI is a TypeScript/Node.js multi-agent orchestrator. Prior to version 5.12.2, `EnvironmentManager.backup()` recursively collects files using `_collectBackupFiles()`. `_collectBackupFiles()` uses `statSync(full)`, which follows symlinks. If `data/<env>` contains a symlink to a directory outside the environment root, backup recursion follows the symlink and copies external files into `data/<env>/.backups/<backupId>/`. An attacker who can place a symlink under the environment data directory can cause backup operations to disclose files outside the environment root into backup artifacts. The issue is fixed in v5.12.2. `_collectBackupFiles()` now uses `lstatSync` instead of `statSync` and skips any entry where `isSymbolicLink()` is true. Symlinks are never traversed, so `backup()` can no longer follow a link out of the environment root and copy external files into a backup artifact.

πŸŽ–@cveNotify
🚨 CVE-2026-58481
Network-AI is a TypeScript/Node.js multi-agent orchestrator. Prior to version 5.12.2, `AgentRuntime` promises scoped file access under a configured sandbox `basePath`, but its path containment checks use raw string prefix tests. A sandbox base such as `/tmp/network-ai-sandbox` also matches a sibling path such as `/tmp/network-ai-sandbox_evil/secret.txt`. An agent/user that can call `AgentRuntime.readFile()` or `AgentRuntime.listDir()` can read or list files outside the intended sandbox when the target path is in a sibling directory sharing the base path prefix. This breaks the documented sandbox boundary. The issue is fixed in v5.12.2. `SandboxPolicy.resolvePath()` and `isPathAllowed()` now use separator-anchored prefix checks (`resolved === base || resolved.startsWith(base + path.sep)`) for both the allow-list and block-list. A sibling directory that merely shares a name prefix (e.g. `/srv/app-evil` vs base `/srv/app`) is no longer treated as in-scope.

πŸŽ–@cveNotify
🚨 CVE-2026-58482
Network-AI, a TypeScript/Node.js multi-agent orchestrator, has a shipped, exported, documented feature called `ApprovalInbox` (`lib/approval-inbox.ts`). It is the network surface of the human-in-the-loop Approval Gate, which `ApprovalGate` uses to require explicit human approval for high-risk operations. The HTTP server it exposes has no authentication of any kind and sets `Access-Control-Allow-Origin: *` on every route, including the state-changing `POST /approvals/:id/approve` and `/deny`. As a result, in versions 5.0.0 through 5.12.1, any party who can send an HTTP request to the inbox port β€” a co-located process, a container/SSRF on the same host, a remote client when the operator binds a non-loopback address, or any website the operator visits in a browser (via the wildcard CORS) β€” can enumerate pending approvals and approve them, defeating the entire human-in-the-loop control and causing the gated high-risk action (e.g. a shell command the agent was holding for review) to execute without consent. This issue is fixed in v5.12.2. `ApprovalInbox` now accepts a `secret` option. When set, the mutating endpoints `POST /:id/approve` and `POST /:id/deny` require an `Authorization: Bearer <secret>` header, validated in constant time with `crypto.timingSafeEqual`. `startServer()` already binds to `127.0.0.1` by default; operators exposing the inbox on a network must set a secret.

πŸŽ–@cveNotify
🚨 CVE-2026-58484
Network-AI is a TypeScript/Node.js multi-agent orchestrator. Prior to version 5.12.2, `EnvironmentManager.listBackups()` reads each backup's `_manifest.json` and trusts the manifest's `path` field. `EnvironmentManager.pruneBackups()` later passes that trusted `entry.path` directly to `rmSync(entry.path, { recursive: true, force: true })`. An attacker who can place or modify a manifest inside `data/<env>/.backups/<name>/_manifest.json` can cause `network-ai env backup prune --env <env> --keep <n>` or any code path invoking `pruneBackups()` to recursively delete an arbitrary path accessible to the Network-AI process user. This is fixed in v5.12.2. `pruneBackups()` no longer passes `entry.path` from the on-disk manifest to `rmSync`. The deletion path is recomputed from a format-validated `entry.backupId`, and a `dirname` containment check confines deletion to exactly one level under the backups directory. A poisoned manifest (e.g. `"path": "/"`) is now inert.

πŸŽ–@cveNotify
🚨 CVE-2026-55626
xrdp is an open source RDP server. In versions 0.10.6 and prior, when an authenticated user session is initialized using the Xvnc backend over UNIX domain sockets, the Xvnc process is launched with insufficient authentication mechanisms. A local authenticated attacker could exploit this vulnerability to bypass intended session isolation, allowing them to unauthorizedly view or control the active desktop sessions of other users on the same system. Users using other backends, such as xorgxrdp or Xvnc over TCP sockets, are not affected. This issue has been fixed in version 0.10.6.1.

πŸŽ–@cveNotify
🚨 CVE-2026-55639
xrdp is an open source RDP server. Versions 0.10.6 and prior contain a vulnerability concerning the parsing of Client Security Data within the Client MCS Connect Initial PDU with GCC Conference Create Request during the connection sequence. During the initial capability and security negotiation phase, the parser fails to perform sufficient length validation for the incoming data block. A remote, unauthenticated attacker could potentially exploit this flaw by sending a specially crafted RDP packet containing malformed data. Due to missing bounds checks, the xrdp process may read a small number of bytes beyond the declared data block boundary, potentially disclosing process memory contents that could be combined with other vulnerabilities. This issue has been fixed in version 0.10.6.1.

πŸŽ–@cveNotify
🚨 CVE-2026-56578
HCL MyCloud was affected by Server Version Disclosure. It may help attackers identify and exploit known vulnerabilities affecting the disclosed software versions.

πŸŽ–@cveNotify
🚨 CVE-2026-56579
HCL MyCloud was affected with License Key Revealed in HTTP Response. It may enable attackers to misuse the exposed information and compromise the application's security.

πŸŽ–@cveNotify
🚨 CVE-2026-56581
HCL MyCloud was affected with Cookie Attribute Path Not Set. It may increase the risk of unauthorized access to session data or authentication tokens.

πŸŽ–@cveNotify
🚨 CVE-2026-56582
HCL MyCloud was affected by the SSL/TLS LUCKY13 Vulnerability. An attacker may exploit this vulnerability to decrypt sensitive information through a TLS/SSL padding oracle attack.

πŸŽ–@cveNotify
🚨 CVE-2026-12547
SoupAuthManager caches proxy authentication credentials without scoping them to the proxy authority (host:port). When the proxy configuration changes (e.g., via system settings or WPAD), cached Proxy-Authorization headers from the previous proxy are sent to the new proxy, leaking credentials.

πŸŽ–@cveNotify
🚨 CVE-2026-12548
A heap out-of-bounds read flaw was found in libsoup. When parsing multipart HTTP messages, an integer type mismatch between the caller and soup_headers_parse() can cause the length parameter to be incorrectly truncated, leading to a heap buffer over-read. A remote attacker could use this flaw to crash an application using libsoup or potentially disclose heap memory contents.

πŸŽ–@cveNotify
🚨 CVE-2026-1995
In versions before 7.0.0.64, IDrive’s id_service.exe process runs with elevated privileges and regularly reads from several files under the C:\ProgramData\IDrive\ directory. The UTF16-LE encoded contents of these files are used as arguments for starting a process, but they can be edited by any standard user logged into the system. An attacker can overwrite or edit the files to specify a path to an arbitrary executable, which will then be executed by the id_service.exe process with SYSTEM privileges.

πŸŽ–@cveNotify
🚨 CVE-2026-44697
Klever-Go is the Go implementation of the Klever blockchain protocol. Prior to 1.7.17, a remote, unauthenticated denial-of-service vulnerability in Batch.Decompress (data/batch/batch.go) allows any peer that participates in a topic served by MultiDataInterceptor to allocate multi-gigabyte heaps on the receiving node from a sub-50 KiB gossip payload. A single packet is sufficient to OOM-kill a validator with conventional memory provisioning. Fleet-wide application affects chain liveness. This vulnerability is fixed in 1.7.17.

πŸŽ–@cveNotify