🚨 CVE-2026-53094
In the Linux kernel, the following vulnerability has been resolved:

bpf: Fix stale offload->prog pointer after constant blinding

When a dev-bound-only BPF program (BPF_F_XDP_DEV_BOUND_ONLY) undergoes
JIT compilation with constant blinding enabled (bpf_jit_harden >= 2),
bpf_jit_blind_constants() clones the program. The original prog is then
freed in bpf_jit_prog_release_other(), which updates aux->prog to point
to the surviving clone, but fails to update offload->prog.

This leaves offload->prog pointing to the freed original program. When
the network namespace is subsequently destroyed, cleanup_net() triggers
bpf_dev_bound_netdev_unregister(), which iterates ondev->progs and calls
__bpf_prog_offload_destroy(offload->prog). Accessing the freed prog
causes a page fault:

BUG: unable to handle page fault for address: ffffc900085f1038
Workqueue: netns cleanup_net
RIP: 0010:__bpf_prog_offload_destroy+0xc/0x80
Call Trace:
__bpf_offload_dev_netdev_unregister+0x257/0x350
bpf_dev_bound_netdev_unregister+0x4a/0x90
unregister_netdevice_many_notify+0x2a2/0x660
...
cleanup_net+0x21a/0x320

The test sequence that triggers this reliably is:

1. Set net.core.bpf_jit_harden=2 (echo 2 > /proc/sys/net/core/bpf_jit_harden)
2. Run xdp_metadata selftest, which creates a dev-bound-only XDP
program on a veth inside a netns (./test_progs -t xdp_metadata)
3. cleanup_net -> page fault in __bpf_prog_offload_destroy

Dev-bound-only programs are unique in that they have an offload structure
but go through the normal JIT path instead of bpf_prog_offload_compile().
This means they are subject to constant blinding's prog clone-and-replace,
while also having offload->prog that must stay in sync.

Fix this by updating offload->prog in bpf_jit_prog_release_other(),
alongside the existing aux->prog update. Both are back-pointers to
the prog that must be kept in sync when the prog is replaced.

🎖@cveNotify

🚨 CVE-2026-53095
In the Linux kernel, the following vulnerability has been resolved:

bpf: Fix abuse of kprobe_write_ctx via freplace

uprobe programs are allowed to modify struct pt_regs.

Since the actual program type of uprobe is KPROBE, it can be abused to
modify struct pt_regs via kprobe+freplace when the kprobe attaches to
kernel functions.

For example,

SEC("?kprobe")
int kprobe(struct pt_regs *regs)
{
return 0;
}

SEC("?freplace")
int freplace_kprobe(struct pt_regs *regs)
{
regs->di = 0;
return 0;
}

freplace_kprobe prog will attach to kprobe prog.
kprobe prog will attach to a kernel function.

Without this patch, when the kernel function runs, its first arg will
always be set as 0 via the freplace_kprobe prog.

To fix the abuse of kprobe_write_ctx=true via kprobe+freplace, disallow
attaching freplace programs on kprobe programs with different
kprobe_write_ctx values.

🎖@cveNotify

🚨 CVE-2026-53096
In the Linux kernel, the following vulnerability has been resolved:

bpf: Use RCU-safe iteration in dev_map_redirect_multi() SKB path

The DEVMAP_HASH branch in dev_map_redirect_multi() uses
hlist_for_each_entry_safe() to iterate hash buckets, but this function
runs under RCU protection (called from xdp_do_generic_redirect_map()
in softirq context). Concurrent writers (__dev_map_hash_update_elem,
dev_map_hash_delete_elem) modify the list using RCU primitives
(hlist_add_head_rcu, hlist_del_rcu).

hlist_for_each_entry_safe() performs plain pointer dereferences without
rcu_dereference(), missing the acquire barrier needed to pair with
writers' rcu_assign_pointer(). On weakly-ordered architectures (ARM64,
POWER), a reader can observe a partially-constructed node. It also
defeats CONFIG_PROVE_RCU lockdep validation and KCSAN data-race
detection.

Replace with hlist_for_each_entry_rcu() using rcu_read_lock_bh_held()
as the lockdep condition, consistent with the rcu_dereference_check()
used in the DEVMAP (non-hash) branch of the same functions. Also fix
the same incorrect lockdep_is_held(&dtab->index_lock) condition in
dev_map_enqueue_multi(), where the lock is not held either.

🎖@cveNotify

🚨 CVE-2026-53097
In the Linux kernel, the following vulnerability has been resolved:

wifi: mt76: mt7996: fix use-after-free bugs in mt7996_mac_dump_work()

When the mt7996 pci chip is detaching, the mt7996_crash_data is
released in mt7996_coredump_unregister(). However, the work item
dump_work may still be running or pending, leading to UAF bugs
when the already freed crash_data is dereferenced again in
mt7996_mac_dump_work().

The race condition can occur as follows:

CPU 0 (removal path) | CPU 1 (workqueue)
mt7996_pci_remove() | mt7996_sys_recovery_set()
mt7996_unregister_device() | mt7996_reset()
mt7996_coredump_unregister() | queue_work()
vfree(dev->coredump.crash_data) | mt7996_mac_dump_work()
| crash_data-> // UAF

Fix this by ensuring dump_work is properly canceled before
the crash_data is deallocated. Add cancel_work_sync() in
mt7996_unregister_device() to synchronize with any pending
or executing dump work.

🎖@cveNotify

🚨 CVE-2026-53098
In the Linux kernel, the following vulnerability has been resolved:

wifi: mt76: mt7915: fix use-after-free bugs in mt7915_mac_dump_work()

When the mt7915 pci chip is detaching, the mt7915_crash_data is
released in mt7915_coredump_unregister(). However, the work item
dump_work may still be running or pending, leading to UAF bugs
when the already freed crash_data is dereferenced again in
mt7915_mac_dump_work().

The race condition can occur as follows:

CPU 0 (removal path) | CPU 1 (workqueue)
mt7915_pci_remove() | mt7915_sys_recovery_set()
mt7915_unregister_device() | mt7915_reset()
mt7915_coredump_unregister() | queue_work()
vfree(dev->coredump.crash_data) | mt7915_mac_dump_work()
| crash_data-> // UAF

Fix this by ensuring dump_work is properly canceled before
the crash_data is deallocated. Add cancel_work_sync() in
mt7915_unregister_device() to synchronize with any pending
or executing dump work.

🎖@cveNotify

🚨 CVE-2026-53099
In the Linux kernel, the following vulnerability has been resolved:

bpf: Switch CONFIG_CFI_CLANG to CONFIG_CFI

This was renamed in commit 23ef9d439769 ("kcfi: Rename CONFIG_CFI_CLANG
to CONFIG_CFI") as it is now a compiler-agnostic option. Using the wrong
name results in the code getting compiled out. Meaning the CFI failures
for btf_dtor_kfunc_t would still trigger.

🎖@cveNotify

🚨 CVE-2026-53100
In the Linux kernel, the following vulnerability has been resolved:

wifi: mt76: fix deadlock in remain-on-channel

mt76_remain_on_channel() and mt76_roc_complete() call mt76_set_channel()
while already holding dev->mutex. Since mt76_set_channel() also acquires
dev->mutex, this results in a deadlock.

Use __mt76_set_channel() instead of mt76_set_channel().
Add cancel_delayed_work_sync() for mac_work before acquiring the mutex
in mt76_remain_on_channel() to prevent a secondary deadlock with the
mac_work workqueue.

🎖@cveNotify

🚨 CVE-2026-53101
In the Linux kernel, the following vulnerability has been resolved:

wifi: mt76: mt7921: fix potential deadlock in mt7921_roc_abort_sync

roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.

This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() -> mt7921_mac_sta_remove() ->
mt7921_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.

This avoids the mutex deadlock and preserves exactly-once
work ownership.

🎖@cveNotify

🚨 CVE-2026-53102
In the Linux kernel, the following vulnerability has been resolved:

wifi: mt76: Fix memory leak after mt76_connac_mcu_alloc_sta_req()

mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected to
be freed eventually by mt76_mcu_skb_send_msg(). However, currently if
an intermediate function fails before sending, the allocated skb is
leaked.

Specifically, mt76_connac_mcu_sta_wed_update() and
mt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memory
leak in the error path.

Fix this by explicitly freeing the skb in these error paths.
Commit 7c0f63fe37a5 ("wifi: mt76: mt7996: fix memory leak on
mt7996_mcu_sta_key_tlv error") made a similar change.

Compile tested only. Issue found using a prototype static analysis tool
and code review.

🎖@cveNotify

🚨 CVE-2026-53103
In the Linux kernel, the following vulnerability has been resolved:

wifi: mt76: mt7925: fix potential deadlock in mt7925_roc_abort_sync

roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.

This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() ->
mt7925_mac_sta_remove_link() -> mt7925_mac_link_sta_remove() ->
mt7925_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.

This avoids the mutex deadlock and preserves exactly-once
work ownership.

🎖@cveNotify

🚨 CVE-2026-58583
FluxInk (formerly Sunia SPB Peripheral) Color Management Driver (TcnPeripheral64.sys) 1.0.7.2 allows local privilege escalation for a standard user account via arbitrary physical memory mapping at \Device\PhysicalMemory. Fixed in version 1.0.7.6. The fixed driver is currently available in the Windows 11 25H2 HLK (Hardware Lab Kit). The fixed driver may be available through Windows Update or from Lenovo directly.

🎖@cveNotify

🚨 CVE-2026-58378
Allwinner H616 TV Box TV98 has ADB enabled and exposed to the network on production. An attacker could request for ADB authorization and gain root level privileges if the victim allows access.

🎖@cveNotify

🚨 CVE-2026-61344
The Superior Court of California Hearing Reminder Service at https://www.hrs.courts.ca.gov exposes an API endpoint that returns court reminder records containing potentially sensitive information without authentication.

🎖@cveNotify

🚨 CVE-2026-57474
Deloitte AI Assist for Customer disclosed some configuration information through public-facing API endpoints that accepted unauthenticated requests. This information could reduce an attacker’s reconnaissance effort. On 2026-03-25, AI Assist for Customer restricted network access and enforced authentication for the previously exposed endpoints.

🎖@cveNotify

🚨 CVE-2026-57475
Deloitte AI Assist for Customer accepted unauthenticated POST requests through public-facing API endpoints that allowed a remote attacker to make limited additions to the configuration. These additions were not used by the system. On 2026-03-25, AI Assist for Customer restricted network access and enforced authentication for the previously exposed endpoints.

🎖@cveNotify

🚨 CVE-2026-57476
Deloitte AI Assist for Customer exposed unauthenticated API endpoints that allowed an attacker with knowledge of additional parameters to read from or inject content into the retrieval-augmented generation (RAG) corpus. On 2026-03-25, AI Assist for Customer restricted network access and enforced authentication for the previously exposed endpoints.

🎖@cveNotify

🚨 CVE-2026-56169
Improper authentication in Windows Admin Center allows an authorized attacker to elevate privileges over a network.

🎖@cveNotify

🚨 CVE-2026-57107
Improper authentication in Windows Admin Center allows an authorized attacker to elevate privileges locally.

🎖@cveNotify

🚨 CVE-2026-50485
Buffer over-read in Windows Hyper-V allows an authorized attacker to deny service over an adjacent network.

🎖@cveNotify

🚨 CVE-2026-50486
Use after free in Windows Runtime allows an authorized attacker to elevate privileges locally.

🎖@cveNotify

🚨 CVE-2026-50488
Improper neutralization of special elements used in a command ('command injection') in Windows Clipboard User Service allows an authorized attacker to elevate privileges locally.

🎖@cveNotify