🚨 CVE-2026-53070
In the Linux kernel, the following vulnerability has been resolved:

sctp: disable BH before calling udp_tunnel_xmit_skb()

udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with
BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to
tunnel xmit functions"), on the path:

udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit()

dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU.

Without local_bh_disable(), the context may move between CPUs, which can
break the inc/dec pairing. This may lead to incorrect recursion level
detection and cause packets to be dropped in ip(6)_tunnel_xmit() or
__dev_queue_xmit().

Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths.

In my testing, after enabling the SCTP over UDP:

# ip net exec ha sysctl -w net.sctp.udp_port=9899
# ip net exec ha sysctl -w net.sctp.encap_port=9899
# ip net exec hb sysctl -w net.sctp.udp_port=9899
# ip net exec hb sysctl -w net.sctp.encap_port=9899

# ip net exec ha iperf3 -s

- without this patch:

# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender
[ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver

- with this patch:

# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver

🎖@cveNotify

🚨 CVE-2026-53071
In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp

l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding
l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file
acquires the lock first. A remote BLE device can send a crafted
L2CAP ECRED reconfiguration response to corrupt the channel list
while another thread is iterating it.

Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(),
and l2cap_chan_unlock() and l2cap_chan_put() after, matching the
pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del().

🎖@cveNotify

🚨 CVE-2026-53072
In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER

When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls
hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm()
assumes it is held, and if conn is deleted concurrently -> UAF.

Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen,
and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred
listening socket code paths, hci_connect_cfm(conn) is called with
hdev->lock held.

Fix by holding the lock.

🎖@cveNotify

🚨 CVE-2026-37106
An issue in DokuWiki 2025-05-14b "Librarian" 56.2 allows a remote attacker to create an account via the register function in inc/auth.php. NOTE: this is disputed by the Supplier because this is the intentional behavior when the product is configured for self-registration (a non-default feature). The supplier also notes that there is no configuration migration scenario that would result in the self-registration being enabled without the administrators knowledge.

🎖@cveNotify

🚨 CVE-2026-57393
Exposure of Sensitive System Information to an Unauthorized Control Sphere vulnerability in EDGARROJAS WooCommerce PDF Invoice Builder woo-pdf-invoice-builder allows Retrieve Embedded Sensitive Data.This issue affects WooCommerce PDF Invoice Builder: from n/a through <= 2.0.8.

🎖@cveNotify

🚨 CVE-2026-57804
Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in CodexThemes TheGem Theme Elements (for Elementor) thegem-elements-elementor allows PHP Local File Inclusion.This issue affects TheGem Theme Elements (for Elementor): from n/a through <= 5.11.1.

🎖@cveNotify

🚨 CVE-2026-16072
A flaw was found in the organization management component of Keycloak. A delegated administrator with permission to manage organizations can create an invitation for a non-existent email address and then retrieve the secret registration link directly through the application programming interface. By using this link, the administrator can create new user accounts and add them to the organization without having the required user management permissions or access to the invited email account. This allows an administrator to bypass security boundaries and add unauthorized members to an organization.

🎖@cveNotify

🚨 CVE-2026-16108
A flaw was found in the default-groups REST endpoint and realm representation of Keycloak. This component is responsible for managing groups that are automatically assigned to new users within a realm. The issue allows a delegated administrator with realm-viewing permissions to see the names and identifiers of hidden default groups, even if they lack the specific permissions to view those groups. This can lead to the exposure of sensitive organizational structures or internal group names.

🎖@cveNotify

🚨 CVE-2026-13448
IBM Langflow OSS 1.0.0 through 1.10.1 Lanflow OSS contains an unauthenticated remote code execution vulnerability in the public flow build endpoint ( /api/v1/build_public_tmp/{flow_id}/flow ). The vulnerability stems from an incomplete denylist in the validate_public_flow_no_code_execution() function that fails to block several code-execution agent components including OpenDsStarAgent, CodeActAgentSmolagents, and CSVAgent.

🎖@cveNotify

🚨 CVE-2026-33328
libvips is a fast image processing library with low memory needs. On 32-bit systems in versions before and including 8.18.0, the `gifload` operation could incorrectly determine dimensions leading to an integer overflow. This has been patched in version 8.18.1.

🎖@cveNotify

🚨 CVE-2026-39879
Due to a missing sanitization call in [`afsql_dd_run_query`](https://github.com/syslog-ng/syslog-ng/blob/649e6e18e3459fb4467000a88dfb12fa97f9719c/modules/afsql/afsql.c#L219), syslog-ng before 4.12 are vulnerable to SQL injection from an untrusted source. This is not part of the default configuration, the SQL driver has to be manually configured.

Fixes are in syslog-ng 4.12, syslog-ng Premium Edition 8.2 and syslog-ng Store Box 7.8

🎖@cveNotify

🚨 CVE-2026-44978
xrdp is an open source RDP server. Versions 0.10.6 and prior contain a heap out-of-bounds read vulnerability within the FIPS-specific receive paths. This vulnerability does not affect the default configuration of xrdp. The vulnerability is only exploitable when the security layer is set to security_layer=negotiate or security_layer=rdp, and the crypto level is changed to crypt_level=fips in xrdp.ini. In this specific non-default mode, the server fails to validate the FIPS padding length field, leading to a pointer underflow and a subsequent negative length calculation. An unauthenticated remote attacker can exploit this by sending a crafted FIPS-protected PDU, causing a heap out-of-bounds read that results in a process crash and denial of service (DoS). However, since xrdp forks a new process for each connection by default, an out-of-bounds read causing a process crash is unlikely to bring down the entire xrdp service. This issue has been fixed in version 0.10.6.1.

🎖@cveNotify

🚨 CVE-2026-54051
Network-AI is a TypeScript/Node.js multi-agent orchestrator. Prior to version 5.9.1, the agent sandbox gates shell commands behind an allowlist (`SandboxPolicy.isCommandAllowed`), which THREAT_MODEL.md calls the main control against a compromised agent (Adversary 3.2). The allowlist glob-matches the whole command string, but `ShellExecutor` runs that string through `/bin/sh -c`. So any wildcard allow such as `git *`, `npm *` or `node *` also matches `git status; <anything>`, and a scoped command becomes arbitrary execution. The issue is fixed in v5.9.1. `ShellExecutor` now executes via `spawn(file, args, { shell: false })` using a quote-aware parsed argv, so no shell is invoked. `SandboxPolicy.isCommandAllowed` and the new `SandboxPolicy.tokenizeCommand` reject any unquoted shell metacharacter (`; & | $ ` ` ` ( ) < > { }` newline) or unterminated quote before the allowlist glob match; quoted metacharacters are preserved as literal argument data. Users should upgrade to `network-ai@5.9.1` or later. As defense in depth, avoid broad wildcard allowlist entries such as `node *` / `npm *` which are direct code execution by design.

🎖@cveNotify

🚨 CVE-2026-44228
RT is an open source, enterprise-grade issue and ticket tracking system. Versions 6.0.0 and above, prior to 6.0.3, contain a stored Cross-Site Scripting (XSS) vulnerability, where user-controlled data is rendered without proper HTML escaping. An authenticated user with permission to set the relevant data can inject JavaScript that executes when another RT user views the affected page. This issue has been fixed in version 6.0.3.

🎖@cveNotify

🚨 CVE-2026-63731
HyperDX before 2.31.0 contains a server-side request forgery vulnerability that allows authenticated team members to direct the server to arbitrary internal destinations by supplying a caller-controlled host parameter to the ClickHouse proxy test endpoint with no URL validation or allowlist enforcement. Attackers can exploit the reflected error responses from the endpoint to disclose internal service response bodies, enabling access to internal APIs, container services, and cloud provider metadata endpoints.

🎖@cveNotify

🚨 CVE-2026-44229
RT is an open source, enterprise-grade issue and ticket tracking system. Versions 5.0.0 and 6.0.0 and above, prior to both 5.0.10 and 6.0.3 contain a Cross-Site Scripting (XSS) vulnerability where uploaded content is served inline rather than as an attachment. An authenticated user who can upload content can include JavaScript in the upload that will execute in the browser session of any RT user who later views or downloads it. This issue has been fixed in versions 5.0.10 and 6.0.3.

🎖@cveNotify

🚨 CVE-2026-63766
GPT-SoVITS through 20250606v2pro contains an OS command injection vulnerability in webui.py where ASR, slice, denoise, and uvr5 functions interpolate unsanitized Gradio textbox values directly into shell commands executed with shell=True. Attackers can inject shell metacharacters through path parameters to execute arbitrary OS commands as the server process user without authentication.

🎖@cveNotify

🚨 CVE-2026-44583
Paymenter is a free and open-source webshop solution for management of hosting services. In versions prior to 1.5.0, the PayPal webhook endpoint /extensions/paypal/webhook processes the PAYPAL-CERT-URL HTTP header without validation, allowing attackers to control server-side HTTP request destinations. This value is passed directly into a server-side HTTP request via file_get_contents, allowing attackers to control the destination of the request. No allowlist, validation, or signature verification is applied to the header before usage. As a result, the application can be coerced into performing HTTP requests to attacker-controlled or internal network destinations. This vulnerability allows remote unauthenticated attackers to induce server-side HTTP GET requests to arbitrary external or internal endpoints. Depending on network configuration, this may lead to: blind SSRF to external attacker-controlled systems, and potential access to internal network services No direct response data is returned to the attacker (blind SSRF), but the issue may still enable sensitive network probing or data exfiltration via side channels. This issue has been fixed in version 1.5.0.

🎖@cveNotify

🚨 CVE-2026-47130
NextCRM is open-source customer relationship management (CRM) software. Versions prior to 0.12.0 have a Broken Object Level Authorization (BOLA/IDOR) vulnerability exists in the CRM contact and target update endpoints. The application fails to verify if the authenticated user has ownership of the specific resource being modified. This allows any authenticated user (even with a standard `member` role) to arbitrarily modify sensitive CRM contacts and targets belonging to other users or organizations (cross-tenant data tampering). Version 0.12.0 fixes the issue.

🎖@cveNotify

🚨 CVE-2026-53596
FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.224, the FreeScout helpdesk application does not enforce rate limiting on the file upload endpoint. Any user can flood the server with upload requests, leading to database overload and potential denial of service for all users. Version 1.8.224 contains a fix.

🎖@cveNotify

🚨 CVE-2026-62415
The Joomla extension Membership Pro prior version 4.6.2 did by default allow unauthenticated users to upload media assets.

🎖@cveNotify