🚨 CVE-2026-53056
In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: fix mismatch between power and frequency
During DPU runtime suspend, calling dev_pm_opp_set_rate(dev, 0) drops
the MMCX rail to MIN_SVS while the core clock frequency remains at its
original (highest) rate. When runtime resume re-enables the clock, this
may result in a mismatch between the rail voltage and the clock rate.
For example, in the DPU bind path, the sequence could be:
cpu0: dev_sync_state -> rpmhpd_sync_state
cpu1: dpu_kms_hw_init
timeline 0 ------------------------------------------------> t
After rpmhpd_sync_state, the voltage performance is no longer guaranteed
to stay at the highest level. During dpu_kms_hw_init, calling
dev_pm_opp_set_rate(dev, 0) drops the voltage, causing the MMCX rail to
fall to MIN_SVS while the core clock is still at its maximum frequency.
When the power is re-enabled, only the clock is enabled, leading to a
situation where the MMCX rail is at MIN_SVS but the core clock is at its
highest rate. In this state, the rail cannot sustain the clock rate,
which may cause instability or system crash.
Remove the call to dev_pm_opp_set_rate(dev, 0) from dpu_runtime_suspend
to ensure the correct vote is restored when DPU resumes.
Patchwork: https://patchwork.freedesktop.org/patch/710077/
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: fix mismatch between power and frequency
During DPU runtime suspend, calling dev_pm_opp_set_rate(dev, 0) drops
the MMCX rail to MIN_SVS while the core clock frequency remains at its
original (highest) rate. When runtime resume re-enables the clock, this
may result in a mismatch between the rail voltage and the clock rate.
For example, in the DPU bind path, the sequence could be:
cpu0: dev_sync_state -> rpmhpd_sync_state
cpu1: dpu_kms_hw_init
timeline 0 ------------------------------------------------> t
After rpmhpd_sync_state, the voltage performance is no longer guaranteed
to stay at the highest level. During dpu_kms_hw_init, calling
dev_pm_opp_set_rate(dev, 0) drops the voltage, causing the MMCX rail to
fall to MIN_SVS while the core clock is still at its maximum frequency.
When the power is re-enabled, only the clock is enabled, leading to a
situation where the MMCX rail is at MIN_SVS but the core clock is at its
highest rate. In this state, the rail cannot sustain the clock rate,
which may cause instability or system crash.
Remove the call to dev_pm_opp_set_rate(dev, 0) from dpu_runtime_suspend
to ensure the correct vote is restored when DPU resumes.
Patchwork: https://patchwork.freedesktop.org/patch/710077/
🎖@cveNotify
🚨 CVE-2026-53057
In the Linux kernel, the following vulnerability has been resolved:
iommu/riscv: Add IOTINVAL after updating DDT/PDT entries
Add riscv_iommu_iodir_iotinval() to perform required TLB and context cache
invalidations after updating DDT or PDT entries, as mandated by the RISC-V
IOMMU specification (Section 6.3.1 and 6.3.2).
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
iommu/riscv: Add IOTINVAL after updating DDT/PDT entries
Add riscv_iommu_iodir_iotinval() to perform required TLB and context cache
invalidations after updating DDT or PDT entries, as mandated by the RISC-V
IOMMU specification (Section 6.3.1 and 6.3.2).
🎖@cveNotify
🚨 CVE-2026-53059
In the Linux kernel, the following vulnerability has been resolved:
dm log: fix out-of-bounds write due to region_count overflow
The local variable region_count in create_log_context() is declared as
unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).
When a device-mapper target has a sufficiently large ti->len with a small
region_size, the division result can exceed UINT_MAX. The truncated
value is then used to calculate bitset_size, causing clean_bits,
sync_bits, and recovering_bits to be allocated far smaller than needed
for the actual number of regions.
Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use
region indices derived from the full untruncated region space, causing
out-of-bounds writes to kernel heap memory allocated by vmalloc.
This can be reproduced by creating a mirror target whose region_count
overflows 32 bits:
dmsetup create bigzero --table '0 8589934594 zero'
dmsetup create mymirror --table '0 8589934594 mirror \
core 2 2 nosync 2 /dev/mapper/bigzero 0 \
/dev/mapper/bigzero 0'
The status output confirms the truncation (sync_count=1 instead of
4294967297, because 0x100000001 was truncated to 1):
$ dmsetup status mymirror
0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...
This leads to a kernel crash in core_in_sync:
BUG: scheduling while atomic: (udev-worker)/9150/0x00000000
RIP: 0010:core_in_sync+0x14/0x30 [dm_log]
CR2: 0000000000000008
Fixing recursive fault but reboot is needed!
Fix by widening the local region_count to sector_t and adding an
explicit overflow check before the value is assigned to lc->region_count.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
dm log: fix out-of-bounds write due to region_count overflow
The local variable region_count in create_log_context() is declared as
unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).
When a device-mapper target has a sufficiently large ti->len with a small
region_size, the division result can exceed UINT_MAX. The truncated
value is then used to calculate bitset_size, causing clean_bits,
sync_bits, and recovering_bits to be allocated far smaller than needed
for the actual number of regions.
Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use
region indices derived from the full untruncated region space, causing
out-of-bounds writes to kernel heap memory allocated by vmalloc.
This can be reproduced by creating a mirror target whose region_count
overflows 32 bits:
dmsetup create bigzero --table '0 8589934594 zero'
dmsetup create mymirror --table '0 8589934594 mirror \
core 2 2 nosync 2 /dev/mapper/bigzero 0 \
/dev/mapper/bigzero 0'
The status output confirms the truncation (sync_count=1 instead of
4294967297, because 0x100000001 was truncated to 1):
$ dmsetup status mymirror
0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...
This leads to a kernel crash in core_in_sync:
BUG: scheduling while atomic: (udev-worker)/9150/0x00000000
RIP: 0010:core_in_sync+0x14/0x30 [dm_log]
CR2: 0000000000000008
Fixing recursive fault but reboot is needed!
Fix by widening the local region_count to sector_t and adding an
explicit overflow check before the value is assigned to lc->region_count.
🎖@cveNotify
🚨 CVE-2026-53060
In the Linux kernel, the following vulnerability has been resolved:
dm cache metadata: fix memory leak on metadata abort retry
When failing to acquire the root_lock in dm_cache_metadata_abort because
the block_manager is read-only, the temporary block_manager created
outside the root_lock is not properly released, causing a memory leak.
Reproduce steps:
This can be reproduced by reloading a new table while the metadata
is read-only. While the second call to dm_cache_metadata_abort is
caused by lack of support for table preload in dm-cache, mentioned
in commit 9b1cc9f251af ("dm cache: share cache-metadata object across
inactive and active DM tables"), it exposes the memory leak in
dm_cache_metadata_abort when the function is called multiple times.
Specifically, dm-cache fails to sync the new cache object's mode during
preresume, creating the reproducer condition.
This issue could also occur through concurrent metadata_operation_failed
calls due to races in cache mode updates, but the table preload scenario
below provides a reliable reproducer.
1. Create a cache device with some faulty trailing metadata blocks
dmsetup create cmeta <<EOF
0 200 linear /dev/sdc 0
200 7992 error
EOF
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 131072 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 1 writethrough smq 0"
2. Suspend and resume the cache to start a new metadata transaction and
trigger metadata io errors on the next metadata commit.
dmsetup suspend cache
dmsetup resume cache
3. Write to the cache device to update metadata
fio --filename=/dev/mapper/cache --name test --rw=randwrite --bs=4k \
--randrepeat=0 --direct=1 --size 64k
4. Preload the same table
dmsetup reload cache --table "$(dmsetup table cache)"
5. Resume the new table. This triggers the memory leak.
dmsetup suspend cache
dmsetup resume cache
kmemleak logs:
<snip>
unreferenced object 0xffff8880080c2010 (size 16):
comm "dmsetup", pid 132, jiffies 4294982580
hex dump (first 16 bytes):
00 38 b9 07 80 88 ff ff 6a 6b 6b 6b 6b 6b 6b a5 ...
backtrace (crc 3118f31c):
kmemleak_alloc+0x28/0x40
__kmalloc_cache_noprof+0x3d9/0x510
dm_block_manager_create+0x51/0x140
dm_cache_metadata_abort+0x85/0x320
metadata_operation_failed+0x103/0x1e0
cache_preresume+0xacd/0xe70
dm_table_resume_targets+0xd3/0x320
__dm_resume+0x1b/0xf0
dm_resume+0x127/0x170
<snip>
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
dm cache metadata: fix memory leak on metadata abort retry
When failing to acquire the root_lock in dm_cache_metadata_abort because
the block_manager is read-only, the temporary block_manager created
outside the root_lock is not properly released, causing a memory leak.
Reproduce steps:
This can be reproduced by reloading a new table while the metadata
is read-only. While the second call to dm_cache_metadata_abort is
caused by lack of support for table preload in dm-cache, mentioned
in commit 9b1cc9f251af ("dm cache: share cache-metadata object across
inactive and active DM tables"), it exposes the memory leak in
dm_cache_metadata_abort when the function is called multiple times.
Specifically, dm-cache fails to sync the new cache object's mode during
preresume, creating the reproducer condition.
This issue could also occur through concurrent metadata_operation_failed
calls due to races in cache mode updates, but the table preload scenario
below provides a reliable reproducer.
1. Create a cache device with some faulty trailing metadata blocks
dmsetup create cmeta <<EOF
0 200 linear /dev/sdc 0
200 7992 error
EOF
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 131072 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 1 writethrough smq 0"
2. Suspend and resume the cache to start a new metadata transaction and
trigger metadata io errors on the next metadata commit.
dmsetup suspend cache
dmsetup resume cache
3. Write to the cache device to update metadata
fio --filename=/dev/mapper/cache --name test --rw=randwrite --bs=4k \
--randrepeat=0 --direct=1 --size 64k
4. Preload the same table
dmsetup reload cache --table "$(dmsetup table cache)"
5. Resume the new table. This triggers the memory leak.
dmsetup suspend cache
dmsetup resume cache
kmemleak logs:
<snip>
unreferenced object 0xffff8880080c2010 (size 16):
comm "dmsetup", pid 132, jiffies 4294982580
hex dump (first 16 bytes):
00 38 b9 07 80 88 ff ff 6a 6b 6b 6b 6b 6b 6b a5 ...
backtrace (crc 3118f31c):
kmemleak_alloc+0x28/0x40
__kmalloc_cache_noprof+0x3d9/0x510
dm_block_manager_create+0x51/0x140
dm_cache_metadata_abort+0x85/0x320
metadata_operation_failed+0x103/0x1e0
cache_preresume+0xacd/0xe70
dm_table_resume_targets+0xd3/0x320
__dm_resume+0x1b/0xf0
dm_resume+0x127/0x170
<snip>
🎖@cveNotify
🚨 CVE-2026-53061
In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix dirty mapping checking in passthrough mode switching
As mentioned in commit 9b1cc9f251af ("dm cache: share cache-metadata
object across inactive and active DM tables"), dm-cache assumed table
reload occurs after suspension, while LVM's table preload breaks this
assumption. The dirty mapping check for passthrough mode was designed
around this assumption and is performed during table creation, causing
the check to fail with preload while metadata updates are ongoing. This
risks loading dirty mappings into passthrough mode, resulting in data
loss.
Reproduce steps:
1. Create a writeback cache with zero migration_threshold to produce
dirty mappings
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writeback smq \
2 migration_threshold 0"
2. Preload a table in passthrough mode
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
3. Write to the first cache block to make it dirty
fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \
--direct=1 --size=64k
4. Resume the inactive table. Now it's possible to load the dirty block
into passthrough mode.
dmsetup resume cache
Fix by moving the checks to the preresume phase to support table
preloading. Also remove the unused function dm_cache_metadata_all_clean.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix dirty mapping checking in passthrough mode switching
As mentioned in commit 9b1cc9f251af ("dm cache: share cache-metadata
object across inactive and active DM tables"), dm-cache assumed table
reload occurs after suspension, while LVM's table preload breaks this
assumption. The dirty mapping check for passthrough mode was designed
around this assumption and is performed during table creation, causing
the check to fail with preload while metadata updates are ongoing. This
risks loading dirty mappings into passthrough mode, resulting in data
loss.
Reproduce steps:
1. Create a writeback cache with zero migration_threshold to produce
dirty mappings
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writeback smq \
2 migration_threshold 0"
2. Preload a table in passthrough mode
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
3. Write to the first cache block to make it dirty
fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \
--direct=1 --size=64k
4. Resume the inactive table. Now it's possible to load the dirty block
into passthrough mode.
dmsetup resume cache
Fix by moving the checks to the preresume phase to support table
preloading. Also remove the unused function dm_cache_metadata_all_clean.
🎖@cveNotify
🚨 CVE-2026-53062
In the Linux kernel, the following vulnerability has been resolved:
dm cache policy smq: fix missing locks in invalidating cache blocks
In passthrough mode, the policy invalidate_mapping operation is called
simultaneously from multiple workers, thus it should be protected by a
lock. Otherwise, we might end up with data races on the allocated blocks
counter, or even use-after-free issues with internal data structures
when doing concurrent writes.
Note that the existing FIXME in smq_invalidate_mapping() doesn't affect
passthrough mode since migration tasks don't exist there, but would need
attention if supporting fast device shrinking via suspend/resume without
target reloading.
Reproduce steps:
1. Create a cache device consisting of 1024 cache entries
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. Populate the cache, and record the number of cached blocks
fio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \
--size=64m --direct=1
nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}')
3. Reload the cache into passthrough mode
dmsetup suspend cache
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
dmsetup resume cache
4. Write to the passthrough cache. By setting multiple jobs with I/O
size equal to the cache block size, cache blocks are invalidated
concurrently from different workers.
fio --filename=/dev/mapper/cache --name=test --rw=randwrite --bs=64k \
--direct=1 --numjobs=2 --randrepeat=0 --size=64m
5. Check if demoted matches cached block count. These numbers should
match but may differ due to the data race.
nr_demoted=$(dmsetup status cache | awk '{print $12}')
echo "$nr_cached, $nr_demoted"
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
dm cache policy smq: fix missing locks in invalidating cache blocks
In passthrough mode, the policy invalidate_mapping operation is called
simultaneously from multiple workers, thus it should be protected by a
lock. Otherwise, we might end up with data races on the allocated blocks
counter, or even use-after-free issues with internal data structures
when doing concurrent writes.
Note that the existing FIXME in smq_invalidate_mapping() doesn't affect
passthrough mode since migration tasks don't exist there, but would need
attention if supporting fast device shrinking via suspend/resume without
target reloading.
Reproduce steps:
1. Create a cache device consisting of 1024 cache entries
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. Populate the cache, and record the number of cached blocks
fio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \
--size=64m --direct=1
nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}')
3. Reload the cache into passthrough mode
dmsetup suspend cache
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
dmsetup resume cache
4. Write to the passthrough cache. By setting multiple jobs with I/O
size equal to the cache block size, cache blocks are invalidated
concurrently from different workers.
fio --filename=/dev/mapper/cache --name=test --rw=randwrite --bs=64k \
--direct=1 --numjobs=2 --randrepeat=0 --size=64m
5. Check if demoted matches cached block count. These numbers should
match but may differ due to the data race.
nr_demoted=$(dmsetup status cache | awk '{print $12}')
echo "$nr_cached, $nr_demoted"
🎖@cveNotify
🚨 CVE-2026-53063
In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix write hang in passthrough mode
The invalidate_remove() function has incomplete logic for handling write
hit bios after cache invalidation. It sets up the remapping for the
overwrite_bio but then drops it immediately without submission, causing
write operations to hang.
Fix by adding a new invalidate_committed() continuation that submits
the remapped writes to the cache origin after metadata commit completes,
while using the overwrite_endio hook to ensure proper completion
sequencing. This maintains existing coherency. Also improve error
handling in invalidate_complete() to preserve the original error status
instead of using bio_io_error() unconditionally.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix write hang in passthrough mode
The invalidate_remove() function has incomplete logic for handling write
hit bios after cache invalidation. It sets up the remapping for the
overwrite_bio but then drops it immediately without submission, causing
write operations to hang.
Fix by adding a new invalidate_committed() continuation that submits
the remapped writes to the cache origin after metadata commit completes,
while using the overwrite_endio hook to ensure proper completion
sequencing. This maintains existing coherency. Also improve error
handling in invalidate_complete() to preserve the original error status
instead of using bio_io_error() unconditionally.
🎖@cveNotify
🚨 CVE-2026-53064
In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix null-deref with concurrent writes in passthrough mode
In passthrough mode, when dm-cache starts to invalidate a cache
entry and bio prison cell lock fails due to concurrent write to
the same cached block, mg->cell remains NULL. The error path in
invalidate_complete() attempts to unlock and free the cell
unconditionally, causing a NULL pointer dereference:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 UID: 0 PID: 134 Comm: fio Not tainted 6.19.0-rc7 #3 PREEMPT
RIP: 0010:dm_cell_unlock_v2+0x3f/0x210
<snip>
Call Trace:
invalidate_complete+0xef/0x430
map_bio+0x130f/0x1a10
cache_map+0x320/0x6b0
__map_bio+0x458/0x510
dm_submit_bio+0x40e/0x16d0
__submit_bio+0x419/0x870
<snip>
Reproduce steps:
1. Create a cache device
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. Promote the first data block into cache
fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \
--direct=1 --size=64k
3. Reload the cache into passthrough mode
dmsetup suspend cache
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
dmsetup resume cache
4. Write to the first cached block concurrently
fio --filename=/dev/mapper/cache --name test --rw=randwrite --bs=4k \
--randrepeat=0 --direct=1 --numjobs=2 --size 64k
Fix by checking if mg->cell is valid before attempting to unlock it.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix null-deref with concurrent writes in passthrough mode
In passthrough mode, when dm-cache starts to invalidate a cache
entry and bio prison cell lock fails due to concurrent write to
the same cached block, mg->cell remains NULL. The error path in
invalidate_complete() attempts to unlock and free the cell
unconditionally, causing a NULL pointer dereference:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 UID: 0 PID: 134 Comm: fio Not tainted 6.19.0-rc7 #3 PREEMPT
RIP: 0010:dm_cell_unlock_v2+0x3f/0x210
<snip>
Call Trace:
invalidate_complete+0xef/0x430
map_bio+0x130f/0x1a10
cache_map+0x320/0x6b0
__map_bio+0x458/0x510
dm_submit_bio+0x40e/0x16d0
__submit_bio+0x419/0x870
<snip>
Reproduce steps:
1. Create a cache device
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. Promote the first data block into cache
fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \
--direct=1 --size=64k
3. Reload the cache into passthrough mode
dmsetup suspend cache
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
dmsetup resume cache
4. Write to the first cached block concurrently
fio --filename=/dev/mapper/cache --name test --rw=randwrite --bs=4k \
--randrepeat=0 --direct=1 --numjobs=2 --size 64k
Fix by checking if mg->cell is valid before attempting to unlock it.
🎖@cveNotify
🚨 CVE-2026-53065
In the Linux kernel, the following vulnerability has been resolved:
ASoC: sti: use managed regmap_field allocations
The regmap_field objects allocated at player init are never freed and
may leak resources if the driver is removed.
Switch to devm_regmap_field_alloc() to automatically limit the lifetime
of the allocations the lifetime of the device.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ASoC: sti: use managed regmap_field allocations
The regmap_field objects allocated at player init are never freed and
may leak resources if the driver is removed.
Switch to devm_regmap_field_alloc() to automatically limit the lifetime
of the allocations the lifetime of the device.
🎖@cveNotify
🚨 CVE-2026-53066
In the Linux kernel, the following vulnerability has been resolved:
drm/sun4i: backend: fix error pointer dereference
The function drm_atomic_get_plane_state() can return an error pointer
and is not checked for it. Add error pointer check.
Detected by Smatch:
drivers/gpu/drm/sun4i/sun4i_backend.c:496 sun4i_backend_atomic_check() error:
'plane_state' dereferencing possible ERR_PTR()
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/sun4i: backend: fix error pointer dereference
The function drm_atomic_get_plane_state() can return an error pointer
and is not checked for it. Add error pointer check.
Detected by Smatch:
drivers/gpu/drm/sun4i/sun4i_backend.c:496 sun4i_backend_atomic_check() error:
'plane_state' dereferencing possible ERR_PTR()
🎖@cveNotify
🚨 CVE-2026-53067
In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: pci-ep-msi: Fix error unwind and prevent double alloc
pci_epf_alloc_doorbell() stores the allocated doorbell message array in
epf->db_msg/epf->num_db before requesting MSI vectors. If MSI allocation
fails, the array is freed but the EPF state may still point to freed
memory.
Clear epf->db_msg and epf->num_db on the MSI allocation failure path so
that later cleanup cannot double-free the array and callers can retry
allocation.
Also return -EBUSY when doorbells have already been allocated to prevent
leaking or overwriting an existing allocation.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: pci-ep-msi: Fix error unwind and prevent double alloc
pci_epf_alloc_doorbell() stores the allocated doorbell message array in
epf->db_msg/epf->num_db before requesting MSI vectors. If MSI allocation
fails, the array is freed but the EPF state may still point to freed
memory.
Clear epf->db_msg and epf->num_db on the MSI allocation failure path so
that later cleanup cannot double-free the array and callers can retry
allocation.
Also return -EBUSY when doorbells have already been allocated to prevent
leaking or overwriting an existing allocation.
🎖@cveNotify
🚨 CVE-2026-53068
In the Linux kernel, the following vulnerability has been resolved:
drm/komeda: fix integer overflow in AFBC framebuffer size check
The AFBC framebuffer size validation calculates the minimum required
buffer size by adding the AFBC payload size to the framebuffer offset.
This addition is performed without checking for integer overflow.
If the addition oveflows, the size check may incorrectly succed and
allow userspace to provide an undersized drm_gem_object, potentially
leading to out-of-bounds memory access.
Add usage of check_add_overflow() to safely compute the minimum
required size and reject the framebuffer if an overflow is detected.
This makes the AFBC size validation more robust against malformed.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/komeda: fix integer overflow in AFBC framebuffer size check
The AFBC framebuffer size validation calculates the minimum required
buffer size by adding the AFBC payload size to the framebuffer offset.
This addition is performed without checking for integer overflow.
If the addition oveflows, the size check may incorrectly succed and
allow userspace to provide an undersized drm_gem_object, potentially
leading to out-of-bounds memory access.
Add usage of check_add_overflow() to safely compute the minimum
required size and reject the framebuffer if an overflow is detected.
This makes the AFBC size validation more robust against malformed.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
🎖@cveNotify
🚨 CVE-2026-53069
In the Linux kernel, the following vulnerability has been resolved:
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
syzkaller reported a kernel panic in bond_rr_gen_slave_id() reached via
xdp_master_redirect(). Full decoded trace:
https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73
bond_rr_gen_slave_id() dereferences bond->rr_tx_counter, a per-CPU
counter that bonding only allocates in bond_open() when the mode is
round-robin. If the bond device was never brought up, rr_tx_counter
stays NULL.
The XDP redirect path can still reach that code on a bond that was
never opened: bpf_master_redirect_enabled_key is a global static key,
so as soon as any bond device has native XDP attached, the
XDP_TX -> xdp_master_redirect() interception is enabled for every
slave system-wide. The path xdp_master_redirect() ->
bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() ->
bond_rr_gen_slave_id() then runs against a bond that has no
rr_tx_counter and crashes.
Fix this in the generic xdp_master_redirect() by refusing to call into
the master's ->ndo_xdp_get_xmit_slave() when the master device is not
up. IFF_UP is only set after ->ndo_open() has successfully returned,
so this reliably excludes masters whose XDP state has not been fully
initialized. Drop the frame with XDP_ABORTED so the exception is
visible via trace_xdp_exception() rather than silently falling through.
This is not specific to bonding: any current or future master that
defers XDP state allocation to ->ndo_open() is protected.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
syzkaller reported a kernel panic in bond_rr_gen_slave_id() reached via
xdp_master_redirect(). Full decoded trace:
https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73
bond_rr_gen_slave_id() dereferences bond->rr_tx_counter, a per-CPU
counter that bonding only allocates in bond_open() when the mode is
round-robin. If the bond device was never brought up, rr_tx_counter
stays NULL.
The XDP redirect path can still reach that code on a bond that was
never opened: bpf_master_redirect_enabled_key is a global static key,
so as soon as any bond device has native XDP attached, the
XDP_TX -> xdp_master_redirect() interception is enabled for every
slave system-wide. The path xdp_master_redirect() ->
bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() ->
bond_rr_gen_slave_id() then runs against a bond that has no
rr_tx_counter and crashes.
Fix this in the generic xdp_master_redirect() by refusing to call into
the master's ->ndo_xdp_get_xmit_slave() when the master device is not
up. IFF_UP is only set after ->ndo_open() has successfully returned,
so this reliably excludes masters whose XDP state has not been fully
initialized. Drop the frame with XDP_ABORTED so the exception is
visible via trace_xdp_exception() rather than silently falling through.
This is not specific to bonding: any current or future master that
defers XDP state allocation to ->ndo_open() is protected.
🎖@cveNotify
🚨 CVE-2026-53070
In the Linux kernel, the following vulnerability has been resolved:
sctp: disable BH before calling udp_tunnel_xmit_skb()
udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with
BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to
tunnel xmit functions"), on the path:
udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit()
dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU.
Without local_bh_disable(), the context may move between CPUs, which can
break the inc/dec pairing. This may lead to incorrect recursion level
detection and cause packets to be dropped in ip(6)_tunnel_xmit() or
__dev_queue_xmit().
Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths.
In my testing, after enabling the SCTP over UDP:
# ip net exec ha sysctl -w net.sctp.udp_port=9899
# ip net exec ha sysctl -w net.sctp.encap_port=9899
# ip net exec hb sysctl -w net.sctp.udp_port=9899
# ip net exec hb sysctl -w net.sctp.encap_port=9899
# ip net exec ha iperf3 -s
- without this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender
[ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver
- with this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
sctp: disable BH before calling udp_tunnel_xmit_skb()
udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with
BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to
tunnel xmit functions"), on the path:
udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit()
dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU.
Without local_bh_disable(), the context may move between CPUs, which can
break the inc/dec pairing. This may lead to incorrect recursion level
detection and cause packets to be dropped in ip(6)_tunnel_xmit() or
__dev_queue_xmit().
Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths.
In my testing, after enabling the SCTP over UDP:
# ip net exec ha sysctl -w net.sctp.udp_port=9899
# ip net exec ha sysctl -w net.sctp.encap_port=9899
# ip net exec hb sysctl -w net.sctp.udp_port=9899
# ip net exec hb sysctl -w net.sctp.encap_port=9899
# ip net exec ha iperf3 -s
- without this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender
[ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver
- with this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver
🎖@cveNotify
🚨 CVE-2026-53071
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp
l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding
l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file
acquires the lock first. A remote BLE device can send a crafted
L2CAP ECRED reconfiguration response to corrupt the channel list
while another thread is iterating it.
Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(),
and l2cap_chan_unlock() and l2cap_chan_put() after, matching the
pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del().
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp
l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding
l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file
acquires the lock first. A remote BLE device can send a crafted
L2CAP ECRED reconfiguration response to corrupt the channel list
while another thread is iterating it.
Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(),
and l2cap_chan_unlock() and l2cap_chan_put() after, matching the
pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del().
🎖@cveNotify
🚨 CVE-2026-53072
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls
hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm()
assumes it is held, and if conn is deleted concurrently -> UAF.
Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen,
and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred
listening socket code paths, hci_connect_cfm(conn) is called with
hdev->lock held.
Fix by holding the lock.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls
hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm()
assumes it is held, and if conn is deleted concurrently -> UAF.
Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen,
and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred
listening socket code paths, hci_connect_cfm(conn) is called with
hdev->lock held.
Fix by holding the lock.
🎖@cveNotify
🚨 CVE-2026-37106
An issue in DokuWiki 2025-05-14b "Librarian" 56.2 allows a remote attacker to create an account via the register function in inc/auth.php. NOTE: this is disputed by the Supplier because this is the intentional behavior when the product is configured for self-registration (a non-default feature). The supplier also notes that there is no configuration migration scenario that would result in the self-registration being enabled without the administrators knowledge.
🎖@cveNotify
An issue in DokuWiki 2025-05-14b "Librarian" 56.2 allows a remote attacker to create an account via the register function in inc/auth.php. NOTE: this is disputed by the Supplier because this is the intentional behavior when the product is configured for self-registration (a non-default feature). The supplier also notes that there is no configuration migration scenario that would result in the self-registration being enabled without the administrators knowledge.
🎖@cveNotify
Gist
CVE-2026-37106: DokuWiki Unauthorized User Registration Vulnerability
CVE-2026-37106: DokuWiki Unauthorized User Registration Vulnerability - cve-2026-37106.md
🚨 CVE-2026-57393
Exposure of Sensitive System Information to an Unauthorized Control Sphere vulnerability in EDGARROJAS WooCommerce PDF Invoice Builder woo-pdf-invoice-builder allows Retrieve Embedded Sensitive Data.This issue affects WooCommerce PDF Invoice Builder: from n/a through <= 2.0.8.
🎖@cveNotify
Exposure of Sensitive System Information to an Unauthorized Control Sphere vulnerability in EDGARROJAS WooCommerce PDF Invoice Builder woo-pdf-invoice-builder allows Retrieve Embedded Sensitive Data.This issue affects WooCommerce PDF Invoice Builder: from n/a through <= 2.0.8.
🎖@cveNotify
Patchstack
Sensitive Data Exposure in WordPress WooCommerce PDF Invoice Builder Plugin
Patchstack is the leading open source vulnerability research organization. Find information and protection for all WordPress, Drupal and Joomla security issues.
🚨 CVE-2026-57804
Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in CodexThemes TheGem Theme Elements (for Elementor) thegem-elements-elementor allows PHP Local File Inclusion.This issue affects TheGem Theme Elements (for Elementor): from n/a through <= 5.11.1.
🎖@cveNotify
Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in CodexThemes TheGem Theme Elements (for Elementor) thegem-elements-elementor allows PHP Local File Inclusion.This issue affects TheGem Theme Elements (for Elementor): from n/a through <= 5.11.1.
🎖@cveNotify
Patchstack
Local File Inclusion in WordPress TheGem Theme Elements (for Elementor) Plugin
Patchstack is the leading open source vulnerability research organization. Find information and protection for all WordPress, Drupal and Joomla security issues.
🚨 CVE-2026-16072
A flaw was found in the organization management component of Keycloak. A delegated administrator with permission to manage organizations can create an invitation for a non-existent email address and then retrieve the secret registration link directly through the application programming interface. By using this link, the administrator can create new user accounts and add them to the organization without having the required user management permissions or access to the invited email account. This allows an administrator to bypass security boundaries and add unauthorized members to an organization.
🎖@cveNotify
A flaw was found in the organization management component of Keycloak. A delegated administrator with permission to manage organizations can create an invitation for a non-existent email address and then retrieve the secret registration link directly through the application programming interface. By using this link, the administrator can create new user accounts and add them to the organization without having the required user management permissions or access to the invited email account. This allows an administrator to bypass security boundaries and add unauthorized members to an organization.
🎖@cveNotify
🚨 CVE-2026-16108
A flaw was found in the default-groups REST endpoint and realm representation of Keycloak. This component is responsible for managing groups that are automatically assigned to new users within a realm. The issue allows a delegated administrator with realm-viewing permissions to see the names and identifiers of hidden default groups, even if they lack the specific permissions to view those groups. This can lead to the exposure of sensitive organizational structures or internal group names.
🎖@cveNotify
A flaw was found in the default-groups REST endpoint and realm representation of Keycloak. This component is responsible for managing groups that are automatically assigned to new users within a realm. The issue allows a delegated administrator with realm-viewing permissions to see the names and identifiers of hidden default groups, even if they lack the specific permissions to view those groups. This can lead to the exposure of sensitive organizational structures or internal group names.
🎖@cveNotify