🚨 CVE-2026-53515
Better Auth is an authentication and authorization library for TypeScript. From 1.2.10 until 1.6.11, the @better-auth/sso plugin's POST /sso/register endpoint lets any organization member attach a new SSO provider to that organization because registerSSOProvider checks only for a membership row and does not require an owner or admin role, allowing attacker-controlled OIDC or SAML providers to drive /sso/callback/{providerId} organization provisioning. This issue is fixed in version 1.6.11.

🎖@cveNotify

🚨 CVE-2026-22752
Authentication bypass by primary weakness vulnerability in Spring Security Spring Authorization Server.

This issue affects Spring Authorization Server: from 7.0.0 through 7.0.4, from 1.5.0 through 1.5.6, from 1.4.0 through 1.4.9, from 1.3.0 through 1.3.10.

🎖@cveNotify

🚨 CVE-2026-15379
The Altiris WMI provider exposes a class (AltirisAgent_Stream) that allows any local standard user to read the contents of any file accessible to the SYSTEM account, bypassing filesystem ACLs. No admin privileges required. The provider reverts to the LocalSystem context when servicing WMI queries without re-impersonating the caller. Any local standard user can therefore read SYSTEM-readable files — including configuration files, service logs, and secrets stored with SYSTEM/Administrator-only ACLs — by querying the provider directly.

🎖@cveNotify

🚨 CVE-2026-15380
A non-administrator interactive user can obtain full SYSTEM code execution through a DCOM/task scheduler logic chain — no network access, no memory corruption required (ITMS 8.7.3)

🎖@cveNotify

🚨 CVE-2026-14741
HTTP::Date versions before 6.08 for Perl allow CPU exhaustion via polynomial regex backtracking in parse_date.

parse_date() matches the date string against a chain of alternative regexes, and str2time() delegates to it. Several of these patterns place unbounded quantifiers next to each other before a trailing `\s*$` anchor. A valid date prefix followed by a long interior run of digits, letters, or whitespace and a single trailing byte that defeats the final match forces the engine to repartition the run, giving polynomial (about quadratic) backtracking. A header value of a few tens of kilobytes runs for tens of seconds of CPU.

HTTP::Date parses timestamps such as HTTP `Date`, `Expires`, and `Last-Modified` headers, which commonly originate from untrusted sources. Any caller that passes an untrusted date header to str2time() or parse_date() can be driven to consume unbounded CPU, a denial of service.

🎖@cveNotify

🚨 CVE-2026-16103
A flaw was found in the keycloak-services component of Keycloak. This issue is an incomplete fix for CVE-2026-9798, where brute-force protection checks were added to the Client-Initiated Backchannel Authentication (CIBA) initiation handler but were omitted from the token redemption handler. This allows an attacker with valid client credentials to obtain access and refresh tokens for a user account that has been locked due to brute-force protection, provided the authentication request was started before the lockout occurred and was approved by the user.

🎖@cveNotify

🚨 CVE-2026-16155
A vulnerability was identified in SourceCodester Class and Exam Timetabling System 1.0. Affected by this issue is some unknown functionality of the file /schoolyr.php. The manipulation of the argument sy leads to cross site scripting. It is possible to initiate the attack remotely. The exploit is publicly available and might be used.

🎖@cveNotify

🚨 CVE-2026-10130
QueryWeaver contains an authentication bypass vulnerability that allows unauthenticated attackers to obtain valid session tokens for existing accounts by submitting a signup request with a known victim email address. The signup route unconditionally creates and links a new token to the matching Identity via a Cypher MERGE operation before checking whether the email belongs to an existing account, causing the server to return a valid authenticated session token for the victim's identity without requiring any prior credentials or user interaction.

🎖@cveNotify

🚨 CVE-2026-16198
A vulnerability was detected in Sipeed PicoClaw up to 0.2.9. The impacted element is an unknown function of the file web/backend/middleware/access_control.go of the component First Run Setup. Performing a manipulation of the argument allowed_cidrs results in authentication bypass using alternate channel. The attack may be initiated remotely. The attack's complexity is rated as high. The exploitability is regarded as difficult. The exploit is now public and may be used. The patch is named 017601354be38cb027ff3ffb01aed79bd5d12610. Applying a patch is the recommended action to fix this issue.

🎖@cveNotify

🚨 CVE-2026-16204
A security flaw has been discovered in zevorn rt-claw up to 0.2.0. This affects the function tool_run_script_execute of the file claw/services/tools/script.c of the component Telegram-to-AI Tool Execution Flow. Performing a manipulation results in code injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

🎖@cveNotify

🚨 CVE-2026-46410
FileBrowser Quantum is a free, self-hosted, web-based file manager. Versions prior to 1.3.2-stable and 1.4.1-beta may leak some sensitive info, such as source and path. Versions 1.3.2-stable and 1.4.1-beta fix the issue. No known workarounds are available.

🎖@cveNotify

🚨 CVE-2026-53594
FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. FreeScout's `Manage -> Logs -> App Logs` feature uses the bundled `rap2hpoutre/laravel-log-viewer` override to decrypt a user-supplied file identifier and then pass the resolved path to Laravel's download response. Prior to version 1.8.224, the path resolution logic accepts any existing absolute path before applying the intended `storage/logs` restriction. As a result, an attacker who can access the App Logs route and forge a valid Laravel-encrypted `dl` parameter can download arbitrary server-local files readable by the PHP process, not just log files. Version 1.8.224 contains a fix.

🎖@cveNotify

🚨 CVE-2026-47133
ClearanceKit intercepts file-system access events on macOS and enforces per-process access policies. Prior to version 5.0.10, each table in the on-disk SQLite policy store (`/Library/Application Support/clearancekit/store.db`) is verified using an ECDSA signature stored in the `data_signatures` table. The signed payload contains only the canonical row content, with no version counter or freshness binding. An attacker who can write `store.db` and the matching `data_signatures` row — feasible during the opfilter-update window when the Endpoint Security filter is offline, or via offline-boot / decrypted-backup scenarios — can substitute a previously-captured legitimately-signed snapshot. opfilter accepts the older snapshot as fully valid on next boot because the existing signatures still verify. Version 5.0.10 patches the issue.

🎖@cveNotify

🚨 CVE-2026-47255
AgenticMail gives AI agents real email addresses and phone numbers. @agenticmail/api prior to version 0.9.32 and @agenticmail/core prior to version 0.9.10 had weakness related to validation and and binding of inactive-agent hour filtering; storage SQL identifier validation; metadata-backed ownership checks for raw storage SQL; blocking direct storage metadata access through raw SQL; fail-closed outbound worker secret handling; SMTP envelope/header control-character validation before command construction; and TLS certificate verification as the default for MailSender with an explicit opt-out for local development. @agenticmail/api prior to version 0.9.32 and @agenticmail/core prior to version 0.9.10 are patched.

🎖@cveNotify

🚨 CVE-2026-59847
A flaw was found in libssh. Incorrect AES-GCM finalization checks in builds using the OpenSSL backend can effectively remove integrity protection, allowing an in-path attacker to modify plaintext on the wire without detection.

🎖@cveNotify

🚨 CVE-2024-5300
An access control bypass and information disclosure vulnerability exists in the base AppArmor security profile configuration of Canonical snapd. The abstraction rules located in /etc/apparmor.d/abstractions/nss-systemd (inherited via ) inadvertently permit strictly confined snap applications, which lack the privileged account-control interface, to interact directly with the io.systemd.Multiplexer and io.systemd.NameServiceSwitch UNIX domain sockets under /run/systemd/userdb/.
On systems where the systemd-userdbd service is installed and operational, the service fails to distinguish between an unconfined root user on the host system and a restricted root user running within a snap application's sandbox (such as a daemon or configuration hook). Because systemd-userdbd returns "complete" user records—including sensitive hashed user passwords from /etc/shadow—when queried by a process running as root, a compromised or malicious strictly confined snap executing code as root can successfully query the Varlink interface to retrieve all system password hashes, bypassing intended snap sandbox restrictions. This issue is mitigated by the fact that systemd-userdbd is not installed by default on standard Ubuntu deployments.

🎖@cveNotify

🚨 CVE-2026-11876
In zenml-io/zenml version 0.94.2, the `GET /api/v1/stack-deployment/stack` endpoint (`get_deployed_stack`) lacks proper RBAC authorization checks, allowing any authenticated user to enumerate all deployed stacks across all users and tenants. This includes stack component details, service connector information, and user IDs of stack owners. The vulnerability arises from two issues: missing endpoint-level RBAC checks and the use of a server-side `Client()` that bypasses the RBAC enforcement layer by directly accessing the database through `SqlZenStore`. This exposes sensitive information such as infrastructure topology, service connector details, stack ownership, and deployment metadata, potentially enabling cross-tenant reconnaissance and further attacks in multi-tenant ZenML Pro/Cloud deployments.

🎖@cveNotify

🚨 CVE-2026-15226
A sandbox confinement bypass vulnerability exists in Canonical snapd within its internal execution environment compiler (snap-confine). The default seccomp security templates generated by the engine to restrict system calls do not filter or reject process operations capable of creating or manipulating file execution flags with set-user-ID attributes. Consequently, an application running within a strictly confined snap environment can successfully compile or drop binaries and apply setuid properties to them. If a compromised or malicious process inside the snap sandbox executes these generated setuid binaries, it can potentially circumvent architectural sandboxing assumptions, drop intended restriction policies, or execute privileged actions inside the container namespace that should otherwise be strictly blocked. The vulnerability has been resolved by hardening the seccomp template engine to block the execution and creation of setuid executables by sandboxed snap processes.

🎖@cveNotify

🚨 CVE-2026-16448
A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. The affected element is the function cgi_check_rsync_rw of the file /cgi-bin/remote_backup.cgi. The manipulation of the argument ip results in command injection. The attack can be executed remotely. The exploit has been made public and could be used.

🎖@cveNotify

🚨 CVE-2026-46681
@nevware21/ts-utils is a comprehensive TypeScript/JavaScript utility library. Prior to version 0.14.0, the _copyProps function in lib/src/object/copy.ts uses for...in to iterate over source object properties without an Object.hasOwnProperty check, and does not filter dangerous keys (__proto__, constructor, prototype). This allows an attacker to pollute the prototype chain of all objects in the application. Version 0.14.0 patches the issue.

🎖@cveNotify

🚨 CVE-2026-47122
Sparkle is a software update framework for macOS. In versions up to and including 2.9.1, `Autoupdate/AppInstaller.m`'s `shouldAcceptNewConnection:` only enforces `SUCodeSigningVerifier validateConnection:` before stage 1 completes. After `_performedStage1Installation = YES`, new connections to the registered Mach service `<bundleId>-spki` are accepted from any local process without team-ID or code-signing checks. As of time of publication, no known patched versions are available.

🎖@cveNotify