🚨 CVE-2026-44507
Rsync is a file-copying tool that uses a delta-transfer algorithm to synchronize remote and local files. In versions prior to 3.4.3, when using a daemon configured with a chroot, the reverse DNS lookup of the connecting client was performed after the chroot had been entered. If the chroot did not contain the files glibc needs for resolution (/etc/resolv.conf, /etc/nsswitch.conf,
/etc/hosts, NSS service modules), the lookup failed and the connecting hostname was set to "UNKNOWN". Hostname-based deny rules ("hosts deny = *.evil.example") therefore could not match, and an attacker who controlled the PTR record for their source IP could connect from a hostname that the administrator had intended to deny. IP-based ACLs ("hosts allow = 10.0.0.0/8") are unaffected. This issue is fixed in version 3.4.3.

🎖@cveNotify

🚨 CVE-2026-44508
Rsync is a file-copying tool that uses a delta-transfer algorithm to synchronize remote and local files. In versions prior to 3.4.3, the receiver's compressed-token decoder accumulated a 32-bit signed counter without checking for overflow. A malicious sender can trigger an overflow that with careful manipulation can lead to the extraction of data stored in memory of the process allowing an attacker to access environment variables, passwords and memory pointers from the heap, stack, and libraries. The leakage of these pointers and data can significantly reduce the effectiveness of ASLR and facilitate further exploitation. This issue is fixed in version 3.4.3.

🎖@cveNotify

🚨 CVE-2026-44509
Rsync is a file-copying tool that uses a delta-transfer algorithm to synchronize remote and local files. In versions prior to 3.4.3, previous bug fixes for symlink races in open() calls missed races in other path based system calls like chmod() and chown(). For rsync daemons with "use chroot = no" this allows an attacker with local filesystem access to change permissions, ownership or timestamp on a file outside the exported module. This issue is fixed in version 3.4.3.

🎖@cveNotify

🚨 CVE-2026-44583
Paymenter is a free and open-source webshop solution for management of hosting services. In versions prior to 1.5.0, the PayPal webhook endpoint /extensions/paypal/webhook processes the PAYPAL-CERT-URL HTTP header without validation, allowing attackers to control server-side HTTP request destinations. This value is passed directly into a server-side HTTP request via file_get_contents, allowing attackers to control the destination of the request. No allowlist, validation, or signature verification is applied to the header before usage. As a result, the application can be coerced into performing HTTP requests to attacker-controlled or internal network destinations. This vulnerability allows remote unauthenticated attackers to induce server-side HTTP GET requests to arbitrary external or internal endpoints. Depending on network configuration, this may lead to: blind SSRF to external attacker-controlled systems, and potential access to internal network services No direct response data is returned to the attacker (blind SSRF), but the issue may still enable sensitive network probing or data exfiltration via side channels. This issue has been fixed in version 1.5.0.

🎖@cveNotify

🚨 CVE-2026-44584
Paymenter is a free and open-source webshop solution for management of hosting services. In versions prior to 1.5.0, the email update functionality fails to invalidate the existing verification state when a user changes their email address, allowing a verified account to retain its verified status after switching to an unverified or unowned email address. When a user updated their email address, the system did not reset or revalidate the associated email verification status. As a result, the verification column remained set to “true” even after the email address was changed. Exploitation could potentially result in: misrepresentation of email ownership, bypass of verification-based trust assumptions, and abuse of features gated behind verified status. No direct unauthorized access to other users accounts or data is possible through this issue alone. This issue has been fixed in version 1.5.0.

🎖@cveNotify

🚨 CVE-2026-47129
NextCRM is open-source customer relationship management (CRM) software. Versions prior to 0.12.0 have a Broken Access Control (BAC) vulnerability in the `activateUser` and `deactivateUser` Next.js Server Actions of NextCRM. The application fails to verify if the requesting user holds the `admin` role. Consequently, any authenticated user (even those with the lowest `member` or `viewer` roles) can arbitrarily activate or deactivate any user account in the system, including the main administrator. Version 0.12.0 fixes the issue.

🎖@cveNotify

🚨 CVE-2026-47130
NextCRM is open-source customer relationship management (CRM) software. Versions prior to 0.12.0 have a Broken Object Level Authorization (BOLA/IDOR) vulnerability exists in the CRM contact and target update endpoints. The application fails to verify if the authenticated user has ownership of the specific resource being modified. This allows any authenticated user (even with a standard `member` role) to arbitrarily modify sensitive CRM contacts and targets belonging to other users or organizations (cross-tenant data tampering). Version 0.12.0 fixes the issue.

🎖@cveNotify

🚨 CVE-2026-47198
Paymenter is a free and open-source webshop solution for management of hosting services. In versions prior to 1.5.1, the checkout component improperly filters URL-writable properties, allowing authenticated users to inject arbitrary key-value pairs into server provisioning parameters. Because bundled server extensions prioritize these user-supplied properties over administrator-defined configurations, a regular user can override hosting plans and resource limits at checkout without special privileges. The Checkout Livewire component's $checkoutConfig property exposed via URL query parameters, only validating keys explicitly defined by an extension's configuration method, allowing any undefined injected keys to bypass validation entirely. These unsanitized keys are then stored directly in the database by the cart component and later passed to server extensions during provisioning, enabling user-injected data to override intended administrator settings. Depending on the active extension, this leads to unauthorized overrides of core resource limits (such as CPU, RAM, storage, or package tiers). No administrative privileges are required to exploit this vulnerability. This issue has been fixed in version 1.5.1.

🎖@cveNotify

🚨 CVE-2026-53594
FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. FreeScout's `Manage -> Logs -> App Logs` feature uses the bundled `rap2hpoutre/laravel-log-viewer` override to decrypt a user-supplied file identifier and then pass the resolved path to Laravel's download response. Prior to version 1.8.224, the path resolution logic accepts any existing absolute path before applying the intended `storage/logs` restriction. As a result, an attacker who can access the App Logs route and forge a valid Laravel-encrypted `dl` parameter can download arbitrary server-local files readable by the PHP process, not just log files. Version 1.8.224 contains a fix.

🎖@cveNotify

🚨 CVE-2026-53595
FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.224, the public endpoint `POST /user-setup/{hash}/{invite_sent_at}` (`OpenController@userSetupSave`) selects the target account solely by its `invite_hash` column, then overwrites that account's email and password and logs in as it. No authentication, cookie, or prior session is required. After a user activates, FreeScout sets `invite_hash` to the empty string. On MySQL and MariaDB, `VARCHAR` equality ignores trailing spaces, so a single URL-encoded space (`%20`) matches the stored empty string and selects the lowest-id activated user. The expiry guard decrypts `invite_sent_at` with the target's password hash, but `Helper::decrypt` returns its raw input unchanged when decryption fails. A plaintext numeric value such as `9999999999` therefore passes the time-to-live check without any secret. The result is that an anonymous attacker sets the email and password of the lowest-id activated FreeScout account (a support agent, or an administrator if one was added by invitation) and authenticates as that account. Version 1.8.224 contains a fix.

🎖@cveNotify

🚨 CVE-2026-53596
FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.224, the FreeScout helpdesk application does not enforce rate limiting on the file upload endpoint. Any user can flood the server with upload requests, leading to database overload and potential denial of service for all users. Version 1.8.224 contains a fix.

🎖@cveNotify

🚨 CVE-2026-55219
Paymenter is a free and open-source webshop solution for management of hosting services. In versions prior to 1.5.5, the credit payment implementation in app/Livewire/Invoices/Show.php executes a pessimistic row lock (lockForUpdate()) outside of an active database transaction. Because MySQL/MariaDB requires an enclosing transaction to enforce row-level locks, the guard is ineffective. Concurrent payment requests can exploit this race condition to read the same credit balance simultaneously, allowing users to pay multiple invoices using the same credit balance. In database systems like MySQL, a row lock only works inside a formal transaction; without one, the lock is completely ignored. Because there is no active lock, two payment requests sent at the exact same millisecond can look at the database at the same time. Both requests see the original credit balance, decide it is sufficient, and approve the payment. Because the payment processes successfully through ExtensionHelper::addPayment(), the application provisions the corresponding services or digital goods, resulting in direct financial or resource loss to the platform. This issue has been fixed in version 1.5.5.

🎖@cveNotify

🚨 CVE-2026-56452
Path traversal in the sshd-scp component of Apache MINA SSHD. Apache MINA SSHD is a Java library for client-side and server-side SSH.




The implementation of receiving files or directories via SCP did not validate filenames in SCP "C" or "D" commands. A malicious sender could send filenames containing paths, resulting in files to be written in attacker-controlled places.




The issue affects only

* applications that use no longer supported Apache MINA SSHD versions < 2.0.0 and use the SCP functions to receive files,
* or applications using sshd-scp in Apache MINA SSHD >= 2.0.0 to receive files.




Applications using Apache MINA SSHD >= 2.0.0 not using sshd-scp are not affected.




The issue is fixed in Apache MINA 2.19.0 and 3.0.0-M5. Affected applications are advised to upgrade to these versions.

🎖@cveNotify

🚨 CVE-2026-56623
Path traversal on Windows in Apache MINA SSHD component sshd-git. Apache MINA SSHD is a Java library for client-side and server-side SSH.




A git server implemented with Apache MINA SSHD component sshd-git and running on Windows could allow an authenticated remote user access to git repositories outside of the configured server-side root directory. The path validation applied for CVE-2026-48827 in Apache MINA SSHD 2.18.0 and 3.0.0-M4 was partly ineffective for Servers running on Windows.




Applications are affected if they use org.apache.sshd:sshd-git to implement a git server and run on Windows. Applications not using sshd-git or not running on Windows are not affected.




Users are advised to upgrade affected applications to Apache MINA SSHD 2.19.0, which fixes the issue.




The issue also is present in the pre-release milestones 3.0.0-M1 to 3.0.0-M4 for a new upcoming new major version 3.0.0. Again, applications are affected only if they use sshd-git and run on Windows. Upgrade affected applications to 3.0.0-M5.

🎖@cveNotify

🚨 CVE-2026-56624
Improper certificate validation in Apache MINA SSHD (server-side). Apache MINA SSHD is a Java library for client-side and server-side SSH.




Server-side OpenSSH user certificate validation during user authentication in an Apache MINA SSHD server did not check for the unsupported force-command or verify-required options that could be embedded in the certificate, nor did it validate these options. As a result it was possible that a user could authenticate with such a certificate that included a force-command option but still was able to execute other commands. What other command exactly would be available to the user depends on the implementation of the server.




This issue is fixed in Apache MINA SSHD 2.19.0 and 3.0.0-M5. Applications are advised to upgrade to these versions.




The fix rejects OpenSSH user certificates that include these options, since Apache MINA SSHD implements neither force-command nor sk-*-cert-v01@openssh.com user certificates (which are the only ones for which verify-required would make sense).

🎖@cveNotify

🚨 CVE-2026-58624
Improper input validation in sshd-git in Apache MINA SSHD. Apache MINA SSHD is a Java library for client-side and server-side SSH.




Component org.apache.sshd:sshd-git provides though its GitPgmCommandFactory a way to configure an Apache MINA SSHD server such that SSH clients can remotely execute git commands via the JGit library on git repositories stored on the server.




This GitPgmCommandFactory allowed a user authenticated via SSH to run any JGit command available, including commands that could write files at arbitrary places such as git archive with the --output option.




Affected are SSH servers implemented with Apache MINA SSHD and using the GitPgmCommandFactory. If the GitPgmCommandFactory is not configured on the server, the server is not affected.




It is recommended to upgrade affected servers to Apache MINA SSHD 2.19.0 or 3.0.0-M5, which fix this issue.




The issue is fixed by restricting the available commands to a small whitelist of uncritical commands (such as git log). git archive is also allowed, but its --output argument is ignored and the archive is always sent through the SSH channel to the client.

🎖@cveNotify

🚨 CVE-2026-64650
The `@ai-sdk/harness-opencode` tool is an HarnessV1 adapter backed by @openai/codex-sdk, which drives the codex command line interface. Prior to version 1.0.29, the tool relay authorizes requests from any process whose command line contains an allowed helper script path (the Codex CLI shim). This allows untrusted code executing in the sandbox to invoke arbitrary host-exposed tools, including secret lookups, deployment operations, and cloud API calls without a corresponding model-authorized tool-call event. Exploitation requires a Linux environment (the vulnerable fallback checks `process.platform === 'linux'` and reads `/proc`); an active harness session with one or more host-provided tools; and untrusted code executing in the sandbox (e.g. a malicious dependency, build script, or lifecycle hook) The fix in version 1.0.29 removes the process-path authorization fallback entirely. Relay requests are now only accepted after exact, short-lived, one-time authorization matching the tool name and input from a bridge-observed model event. Some workarounds are available. Do not run the Codex harness on untrusted repositories or with untrusted dependencies, and/or limit host-exposed tools to non-sensitive operations when working with untrusted code.

🎖@cveNotify

🚨 CVE-2026-64651
The `@ai-sdk/harness-opencode` tool connects HarnessAgent to OpenCode through a sandboxed bridge. Prior to version 1.0.28, the tool relay authorizes requests from any process whose command line contains an allowed helper script path (`host-tool-mcp.mjs`). This allows untrusted code executing in the sandbox to invoke arbitrary host-exposed tools including secret lookups, deployment operations, and cloud API calls without a corresponding model-authorized tool-call event. Exploitation requires a Linux environment (the vulnerable fallback checks `process.platform === 'linux'` and reads `/proc`); an active harness session with one or more host-provided tools; and untrusted code executing in the sandbox (e.g. a malicious dependency, build script, or lifecycle hook) The fix in version 1.0.28 removes the process-path authorization fallback entirely. Relay requests are now only accepted after exact, short-lived, one-time authorization matching the tool name and input from a bridge-observed model event. Some workarounds are available. Do not run the OpenCode harness on untrusted repositories or with untrusted dependencies, and/or limit host-exposed tools to non-sensitive operations when working with untrusted code.

🎖@cveNotify

🚨 CVE-2026-11332
A flaw was found in ansible-core. The ansible-galaxy role install command processes dependency specifications from a role's meta/requirements.yml file. Due to improper neutralization of argument delimiters, a malicious role author can inject arbitrary git configuration flags through the src field. This allows arbitrary code execution on the machine of a user who installs the role via ansible-galaxy role install.

🎖@cveNotify

🚨 CVE-2026-10649
A flaw was found in Pacemaker. An unauthenticated remote attacker can exploit an integer overflow vulnerability in the remote message decompression process. By sending a specially crafted compressed remote message before authentication, an attacker can cause memory corruption, leading to a denial of service (DoS) in the CIB remote listener. This can result in the affected service crashing.

🎖@cveNotify

🚨 CVE-2026-58016
A flaw was found in GLib. A state confusion issue exists in g_dbus_node_info_new_for_xml() in the gio/gdbusintrospection.c file when processing malformed D-Bus introspection XML, specifically with a <node> element nested within other elements like <method>, <signal>, <property> or <arg>. This issue can cause an unsigned integer overflow and lead to an out-of-bounds read, resulting in a denial of service.

🎖@cveNotify