🚨 CVE-2026-63730
HyperDX before 2.31.0 contains a server-side request forgery vulnerability that allows authenticated team members to direct the server to make requests to arbitrary internal network destinations by supplying a caller-controlled URL to the webhook test endpoint. Attackers can bypass the insufficient hostname blacklist validation in the webhook handler to enumerate internal services, interact with internal containers, or access cloud instance metadata services including provider metadata endpoints.

🎖@cveNotify

🚨 CVE-2026-64193
Net::DNS versions through 1.55 for Perl allow remote execution injection via EDNS EXTENDED ERROR.

Net::DNS::RR::OPT::EXTENDED_ERROR::_decompose parses the EXTRA-TEXT field of an EDNS EXTENDED-ERROR option (RFC 8914) by tokenising the raw bytes and passing the result to Perl's eval. There is some escaping done for $ and @, but not for backticks. This can be exploited for command execution if $pkt->edns->option('EXTENDED-ERROR') is called in array context, for example with a payload of {0:`"<command>"`} in EXTRA-TEXT.

🎖@cveNotify

🚨 CVE-2026-64194
Net::DNS versions through 1.55 for Perl allow Denial of Service via deep DNS compression pointer chains.

Net::DNS::DomainName::decode follows RFC 1035 compression pointers by recursing into itself with no depth limit. It is possible to construct a name which saturates the call stack (at least with larger TCP responses), leading to a potential Denial of Service.

The guard `$link < $offset` prevents forward and circular chains, but still allows arbitrarily long backward chains. The per-offset cache (`$cache`) is populated at the start of each call and short-circuits only re-traverses of the same offset - the initial descent through a fresh chain still recurses at full depth.

A crafted packet can chain two-byte compression pointers so that each one points two bytes earlier than the previous, producing a chain length of `offset / 2`. For the 14-bit pointer field (max offset 16383) this gives up to ~8191 recursive frames. For a TCP DNS message the limit is the 16-bit length field (~32767 frames). Perl's default C stack handles only a few thousand frames; beyond that the process receives SIGSEGV or similar, which is a denial-of-service for any application parsing untrusted DNS data.

The vulnerability is triggered by `Net::DNS::Packet->new(\$wire)` i.e. any point where the library decodes a DNS message from the network.

🎖@cveNotify

🚨 CVE-2026-64619
FileCodeBox before 2.4 contains a rate-limit bypass vulnerability in the IPRateLimit class that allows unauthenticated attackers to circumvent request throttling by supplying attacker-controlled X-Real-IP and X-Forwarded-For headers without verification of trusted reverse proxy origin. Attackers can supply unique spoofed IP values on each request to enumerate all possible share codes and retrieve other users' files without authentication.

🎖@cveNotify

🚨 CVE-2026-53591
FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.223, an unauthenticated attacker can inject messages into any existing support conversation by sending a single email to the helpdesk's public address with a crafted `In-Reply-To` header. No credentials, tokens, or prior access are required. The injected message is rendered in the agent UI as a legitimate customer reply, the conversation is automatically reopened, and the `last_reply_from` field is set to the attacker's identity. Version 1.8.223 contains a fix.

🎖@cveNotify

🚨 CVE-2024-51311
The Tenda TX9 V22.03.02.05 firmware has a stack overflow vulnerability in the sub_4418CC function of the file /goform/SetNetControlList.

🎖@cveNotify

🚨 CVE-2024-51313
The Tenda TX9 V22.03.02.20 firmware has a stack overflow vulnerability in the sub_42EA38 function of the file /goform/SetVirtualServerCfg.

🎖@cveNotify

🚨 CVE-2026-13380
VSee Clinic 7.1.26 and VSee Clinic API 1.3.0 exposes cleartext SFTP credentials in the HTTP responses of three unauthenticated endpoints. The credentials are present in these responses only when SFTP connections have been configured within the application. No authentication is required to retrieve these credentials. An unauthenticated remote attacker who observes any of these HTTP responses on an instance where SFTP is configured can obtain the credentials and use them to access the associated SFTP server.

🎖@cveNotify

🚨 CVE-2026-13381
VSee Clinic 7.1.26 and API 1.3.0 contain an Insecure Direct Object Reference (IDOR) vulnerability in the /v1.3.0/api/files endpoint. An authenticated attacker can manipulate the 'remark' request parameter to enumerate, retrieve, and delete files belonging to other users on the application server.

🎖@cveNotify

🚨 CVE-2026-44507
Rsync is a file-copying tool that uses a delta-transfer algorithm to synchronize remote and local files. In versions prior to 3.4.3, when using a daemon configured with a chroot, the reverse DNS lookup of the connecting client was performed after the chroot had been entered. If the chroot did not contain the files glibc needs for resolution (/etc/resolv.conf, /etc/nsswitch.conf,
/etc/hosts, NSS service modules), the lookup failed and the connecting hostname was set to "UNKNOWN". Hostname-based deny rules ("hosts deny = *.evil.example") therefore could not match, and an attacker who controlled the PTR record for their source IP could connect from a hostname that the administrator had intended to deny. IP-based ACLs ("hosts allow = 10.0.0.0/8") are unaffected. This issue is fixed in version 3.4.3.

🎖@cveNotify

🚨 CVE-2026-44508
Rsync is a file-copying tool that uses a delta-transfer algorithm to synchronize remote and local files. In versions prior to 3.4.3, the receiver's compressed-token decoder accumulated a 32-bit signed counter without checking for overflow. A malicious sender can trigger an overflow that with careful manipulation can lead to the extraction of data stored in memory of the process allowing an attacker to access environment variables, passwords and memory pointers from the heap, stack, and libraries. The leakage of these pointers and data can significantly reduce the effectiveness of ASLR and facilitate further exploitation. This issue is fixed in version 3.4.3.

🎖@cveNotify

🚨 CVE-2026-44509
Rsync is a file-copying tool that uses a delta-transfer algorithm to synchronize remote and local files. In versions prior to 3.4.3, previous bug fixes for symlink races in open() calls missed races in other path based system calls like chmod() and chown(). For rsync daemons with "use chroot = no" this allows an attacker with local filesystem access to change permissions, ownership or timestamp on a file outside the exported module. This issue is fixed in version 3.4.3.

🎖@cveNotify

🚨 CVE-2026-44583
Paymenter is a free and open-source webshop solution for management of hosting services. In versions prior to 1.5.0, the PayPal webhook endpoint /extensions/paypal/webhook processes the PAYPAL-CERT-URL HTTP header without validation, allowing attackers to control server-side HTTP request destinations. This value is passed directly into a server-side HTTP request via file_get_contents, allowing attackers to control the destination of the request. No allowlist, validation, or signature verification is applied to the header before usage. As a result, the application can be coerced into performing HTTP requests to attacker-controlled or internal network destinations. This vulnerability allows remote unauthenticated attackers to induce server-side HTTP GET requests to arbitrary external or internal endpoints. Depending on network configuration, this may lead to: blind SSRF to external attacker-controlled systems, and potential access to internal network services No direct response data is returned to the attacker (blind SSRF), but the issue may still enable sensitive network probing or data exfiltration via side channels. This issue has been fixed in version 1.5.0.

🎖@cveNotify

🚨 CVE-2026-44584
Paymenter is a free and open-source webshop solution for management of hosting services. In versions prior to 1.5.0, the email update functionality fails to invalidate the existing verification state when a user changes their email address, allowing a verified account to retain its verified status after switching to an unverified or unowned email address. When a user updated their email address, the system did not reset or revalidate the associated email verification status. As a result, the verification column remained set to “true” even after the email address was changed. Exploitation could potentially result in: misrepresentation of email ownership, bypass of verification-based trust assumptions, and abuse of features gated behind verified status. No direct unauthorized access to other users accounts or data is possible through this issue alone. This issue has been fixed in version 1.5.0.

🎖@cveNotify

🚨 CVE-2026-47129
NextCRM is open-source customer relationship management (CRM) software. Versions prior to 0.12.0 have a Broken Access Control (BAC) vulnerability in the `activateUser` and `deactivateUser` Next.js Server Actions of NextCRM. The application fails to verify if the requesting user holds the `admin` role. Consequently, any authenticated user (even those with the lowest `member` or `viewer` roles) can arbitrarily activate or deactivate any user account in the system, including the main administrator. Version 0.12.0 fixes the issue.

🎖@cveNotify

🚨 CVE-2026-47130
NextCRM is open-source customer relationship management (CRM) software. Versions prior to 0.12.0 have a Broken Object Level Authorization (BOLA/IDOR) vulnerability exists in the CRM contact and target update endpoints. The application fails to verify if the authenticated user has ownership of the specific resource being modified. This allows any authenticated user (even with a standard `member` role) to arbitrarily modify sensitive CRM contacts and targets belonging to other users or organizations (cross-tenant data tampering). Version 0.12.0 fixes the issue.

🎖@cveNotify

🚨 CVE-2026-47198
Paymenter is a free and open-source webshop solution for management of hosting services. In versions prior to 1.5.1, the checkout component improperly filters URL-writable properties, allowing authenticated users to inject arbitrary key-value pairs into server provisioning parameters. Because bundled server extensions prioritize these user-supplied properties over administrator-defined configurations, a regular user can override hosting plans and resource limits at checkout without special privileges. The Checkout Livewire component's $checkoutConfig property exposed via URL query parameters, only validating keys explicitly defined by an extension's configuration method, allowing any undefined injected keys to bypass validation entirely. These unsanitized keys are then stored directly in the database by the cart component and later passed to server extensions during provisioning, enabling user-injected data to override intended administrator settings. Depending on the active extension, this leads to unauthorized overrides of core resource limits (such as CPU, RAM, storage, or package tiers). No administrative privileges are required to exploit this vulnerability. This issue has been fixed in version 1.5.1.

🎖@cveNotify

🚨 CVE-2026-53594
FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. FreeScout's `Manage -> Logs -> App Logs` feature uses the bundled `rap2hpoutre/laravel-log-viewer` override to decrypt a user-supplied file identifier and then pass the resolved path to Laravel's download response. Prior to version 1.8.224, the path resolution logic accepts any existing absolute path before applying the intended `storage/logs` restriction. As a result, an attacker who can access the App Logs route and forge a valid Laravel-encrypted `dl` parameter can download arbitrary server-local files readable by the PHP process, not just log files. Version 1.8.224 contains a fix.

🎖@cveNotify

🚨 CVE-2026-53595
FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.224, the public endpoint `POST /user-setup/{hash}/{invite_sent_at}` (`OpenController@userSetupSave`) selects the target account solely by its `invite_hash` column, then overwrites that account's email and password and logs in as it. No authentication, cookie, or prior session is required. After a user activates, FreeScout sets `invite_hash` to the empty string. On MySQL and MariaDB, `VARCHAR` equality ignores trailing spaces, so a single URL-encoded space (`%20`) matches the stored empty string and selects the lowest-id activated user. The expiry guard decrypts `invite_sent_at` with the target's password hash, but `Helper::decrypt` returns its raw input unchanged when decryption fails. A plaintext numeric value such as `9999999999` therefore passes the time-to-live check without any secret. The result is that an anonymous attacker sets the email and password of the lowest-id activated FreeScout account (a support agent, or an administrator if one was added by invitation) and authenticates as that account. Version 1.8.224 contains a fix.

🎖@cveNotify

🚨 CVE-2026-53596
FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.224, the FreeScout helpdesk application does not enforce rate limiting on the file upload endpoint. Any user can flood the server with upload requests, leading to database overload and potential denial of service for all users. Version 1.8.224 contains a fix.

🎖@cveNotify

🚨 CVE-2026-55219
Paymenter is a free and open-source webshop solution for management of hosting services. In versions prior to 1.5.5, the credit payment implementation in app/Livewire/Invoices/Show.php executes a pessimistic row lock (lockForUpdate()) outside of an active database transaction. Because MySQL/MariaDB requires an enclosing transaction to enforce row-level locks, the guard is ineffective. Concurrent payment requests can exploit this race condition to read the same credit balance simultaneously, allowing users to pay multiple invoices using the same credit balance. In database systems like MySQL, a row lock only works inside a formal transaction; without one, the lock is completely ignored. Because there is no active lock, two payment requests sent at the exact same millisecond can look at the database at the same time. Both requests see the original credit balance, decide it is sufficient, and approve the payment. Because the payment processes successfully through ExtensionHelper::addPayment(), the application provisions the corresponding services or digital goods, resulting in direct financial or resource loss to the platform. This issue has been fixed in version 1.5.5.

🎖@cveNotify