🚨 CVE-2026-46671
Rust OneNote File Parser is a parser for Microsoft OneNote files implemented in Rust. Prior to version 1.1.1, a maliciously crafted `.onetoc2` table-of-contents file can cause `Parser::parse_notebook` to open arbitrary files on the host filesystem outside the notebook's directory. The parser reads entry names listed inside the `.onetoc2` and joins them against the notebook's base directory without validating that they are relative paths confined to that directory. The parser will bail out when the target file fails to parse as a OneNote section, so direct content exfiltration through the parser's return value is not practical, though file-existence probing and denial-of-service via large or special files remain possible. Anyone using `onenote_parser` to parse .onetoc2 files received from untrusted sources is affected. Users who only ever parse their own notebooks are not at meaningful risk. The issue is fixed in onenote_parser 1.1.1. The fix rejects absolute paths, parent-directory components, and other invalid path characters in entry names, and additionally canonicalises the resolved path to confirm it stays inside the notebook's base directory. For users who cannot upgrade to 1.1.1, only call `Parser::parse_notebook` on `.onetoc2` files from trusted sources. Alternatively, use `Parser::parse_section` / `Parser::parse_section_buffer` on individual .one files, which do not perform the directory walk.

🎖@cveNotify

🚨 CVE-2026-63429
HeyForm is an open-source form builder. Prior to version 3.0.0-rc.9, `POST /api/upload` has no authentication guard, no global guard, no form-context validation, no `openToken` requirement, and no session cookie check. Any anonymous internet user can upload files (PDF, DOC/DOCX, XLS/XLSX, CSV, TXT, MP4, images, etc., up to 10 MB) and receive a permanent public URL on the HeyForm domain. The endpoint is used by both authenticated form creators and unauthenticated form submitters; because no form-context binding exists, every request to it is anonymously accepted. Version 3.0.0-rc.9 contains a patch for the issue.

🎖@cveNotify

🚨 CVE-2026-32806
dataCycle is a data management system for centrally storing, managing, searching, finding, and distributing data. In dataCycle-CORE, the module handling core processing and framework rules, before and including version 25.07.3, any authenticated user can request arbitrary partials or helper-backed render functions through /remote_render. The endpoint does not restrict which partial can be rendered and does not apply controller-specific authorization before rendering the selected view. This enables a low-privileged user to retrieve server-side rendered admin content that is otherwise hidden by navigation and route checks. On the test instance, a Standard user was able to retrieve the PostgreSQL admin dashboard stats even though /admin itself redirected away. This is patched in 26.06.08.

🎖@cveNotify

🚨 CVE-2026-32821
dataCycle is a data management system for centrally storing, managing, searching, finding, and distributing data. In dataCycle-CORE, the module handling core processing and framework rules, before and including version 25.07.3, any authenticated API user who has their own access token can ask the collection API to evaluate permissions as a different user by supplying `user_email`. If the target user has collections, this can expose those collections through the API. In V4, once a collection id is known, the same controller also offers `add_item` and `remove_item` routes without any object-level `authorize!` checks,
creating a likely cross-user modification path. This is patched in version 26.06.08.

🎖@cveNotify

🚨 CVE-2026-32824
dataCycle is a data management system for centrally storing, managing, searching, finding, and distributing data. In dataCycle-CORE, the module handling core processing and framework rules, before and including version 25.07.3, a low-privileged authenticated API user can supply `forwardToUrl` and `redirectUrl` values when triggering password reset or confirmation flows. Those values are then embedded into the outgoing email workflow without host allowlisting. This creates two related abuse paths:
- password reset or confirmation links can be sent to a victim with the token already attached to an attacker-controlled `forwardToUrl`
- after a legitimate password reset completes, the browser is redirected to attacker-controlled `redirectUrl`

In practice, this can be used for phishing, token capture, confirmation hijacking, or steering a victim from a trusted email
into an attacker domain. This is patched in version 26.06.08.

🎖@cveNotify

🚨 CVE-2026-35048
The Piwigo installer in versions 16.3.0 and earlier accepts POST parameters for database configuration and writes them directly into a PHP configuration file without proper sanitization. On PHP 8+, the `addslashes()` protection is bypassed because it checks for `get_magic_quotes_gpc()`, a function removed in PHP 8.0. This allows raw user input to be interpolated directly into PHP source code. An unauthenticated attacker can inject arbitrary PHP code through POST parameters (prefix, dbpasswd, dbhost, dbname, or dbuser), which gets written to `local/config/database.inc.php` and executed on every page load.

🎖@cveNotify

🚨 CVE-2026-35591
libvips is a fast image processing library with low memory needs. The `tiffload` operation in libvips versions before and including 8.18.1 could incorrectly determine the number of channels in a JPEG or JPEG2000-encoded tile within a TIFF image, leading to a possible buffer overflow. This has been patched in version 8.18.2.

🎖@cveNotify

🚨 CVE-2026-40187
In egroupware version 26.0 and earlier, an authenticated administrator can achieve OS-level Remote Code Execution (RCE) by uploading a malicious eTemplate XML file (`.xet`) to the VFS `/etemplates` mount. The `Widget::expand_name()` method passes template widget attribute values directly into a PHP `eval()` call with only double-quote escaping applied - **backtick characters are not escaped**. In PHP, backticks inside a double-quoted `eval()` string execute shell commands. This allows an admin-level user to escalate from web application access to arbitrary OS command execution on the server.

🎖@cveNotify

🚨 CVE-2026-42210
Webmin is a web-based system administration tool for Unix-like servers. Prior to version 2.640, for Webmin accounts that require a second authentication factor (typically TOTP), an attacker with knowledge of the username and password can bypass the 2FA requirement by using Basic authentication. Webmin is a web-based system administration tool for Unix-like servers. As a workaround, apply the patch from commit da18a16c84ae5c0b78cad79609cb0efb174000ec manually.

🎖@cveNotify

🚨 CVE-2026-42218
xrdp is an open source RDP server. Versions 0.10.6 and prior contain a timing side-channel vulnerability in the login interface. Due to a discrepancy in response processing times, a remote attacker can infer the existence of a username on the system, leading to unauthorized information disclosure via username enumeration. This issue has been fixed in version 0.10.6.1.

🎖@cveNotify

🚨 CVE-2026-46555
WhatsApp MCP Server is a Model Context Protocol (MCP) server for WhatsApp, enabling Claude to read and send WhatsApp messages. Prior to version 0.2.1, the `whatsapp-bridge` HTTP API listens on `127.0.0.1:8080` without authentication and without Host header validation, and the `/api/send` endpoint accepts an absolute `media_path` parameter without confining it to a safe directory. Combined, these issues allow any local process running as the same user as the bridge to send WhatsApp messages from the paired account without authorization; the same caller to read arbitrary files readable by the user (e.g. SSH private keys, browser session data, source code, dotfiles) and exfiltrate them as WhatsApp document attachments; and/or a remote attacker to trigger the same operations via DNS rebinding from a webpage the user visits, since no Host header validation is performed. In MCP environments, "local caller" extends beyond processes the user explicitly launched — sibling MCP servers, IDE extensions, and tool-triggered flows running in the user's session can act as the effective caller. This issue is fixed in whatsapp-mcp v0.2.1 and corresponding Docker images / release artifacts. Users should upgrade immediately. The fix introduces bearer token authentication on the bridge HTTP API (configured via environment variable, required on all requests, validated with constant-time comparison); host header allow-list validation to prevent DNS rebinding; and confinement of `media_path` to a configured directory, with rejection of absolute paths outside the root and path traversal sequences. This is a breaking change for clients of the bridge API. For users who cannot immediately upgrade: Stop the bridge, or block loopback access to port 8080, when the bridge is not actively in use; avoid running the bridge alongside untrusted MCP servers, browser extensions, or other untrusted local processes; avoid browsing untrusted sites while the bridge is running (DNS rebinding mitigation); and/or run the bridge under a dedicated user account or in a sandbox/container with no access to sensitive files.

🎖@cveNotify

🚨 CVE-2026-47276
In nanomq versions 0.24.11 and earlier, a NULL pointer dereference in `properties_parse()` allows an authenticated attacker to crash the NanoMQ broker by sending a POST request to `/api/v4/mqtt/publish` with `user_properties` as a JSON array instead of a JSON object. The crash occurs because `strlen()` is called on a NULL `item->string` pointer when iterating over array elements. An authenticated attacker can exploit this to crash the NanoMQ broker process. This is patched in version 0.24.14.

🎖@cveNotify

🚨 CVE-2026-58413
Network-AI is a TypeScript/Node.js multi-agent orchestrator. Prior to version 5.12.2, `EnvironmentManager.restore(env, backupId)` computes the backup path with `join(envDir, '.backups', backupId)` and only checks that this path exists. It does not resolve the result or verify that it remains under `data/<env>/.backups`. A caller can pass a traversal backup ID such as `../../../outside/source-dir` to restore files from an arbitrary directory into the target environment data directory. The issue is fixed in v5.12.2. `restore()` now validates `backupId` against `/^[\w\-]+$/` and asserts `dirname(resolve(join(backupsDir, backupId))) === resolve(backupsDir)` before touching the filesystem. Backup IDs containing path separators or `..` are rejected, so a crafted ID can no longer copy directories from outside `.backups/` into the environment.

🎖@cveNotify

🚨 CVE-2026-58481
Network-AI is a TypeScript/Node.js multi-agent orchestrator. Prior to version 5.12.2, `AgentRuntime` promises scoped file access under a configured sandbox `basePath`, but its path containment checks use raw string prefix tests. A sandbox base such as `/tmp/network-ai-sandbox` also matches a sibling path such as `/tmp/network-ai-sandbox_evil/secret.txt`. An agent/user that can call `AgentRuntime.readFile()` or `AgentRuntime.listDir()` can read or list files outside the intended sandbox when the target path is in a sibling directory sharing the base path prefix. This breaks the documented sandbox boundary. The issue is fixed in v5.12.2. `SandboxPolicy.resolvePath()` and `isPathAllowed()` now use separator-anchored prefix checks (`resolved === base || resolved.startsWith(base + path.sep)`) for both the allow-list and block-list. A sibling directory that merely shares a name prefix (e.g. `/srv/app-evil` vs base `/srv/app`) is no longer treated as in-scope.

🎖@cveNotify

🚨 CVE-2026-58482
Network-AI, a TypeScript/Node.js multi-agent orchestrator, has a shipped, exported, documented feature called `ApprovalInbox` (`lib/approval-inbox.ts`). It is the network surface of the human-in-the-loop Approval Gate, which `ApprovalGate` uses to require explicit human approval for high-risk operations. The HTTP server it exposes has no authentication of any kind and sets `Access-Control-Allow-Origin: *` on every route, including the state-changing `POST /approvals/:id/approve` and `/deny`. As a result, in versions 5.0.0 through 5.12.1, any party who can send an HTTP request to the inbox port — a co-located process, a container/SSRF on the same host, a remote client when the operator binds a non-loopback address, or any website the operator visits in a browser (via the wildcard CORS) — can enumerate pending approvals and approve them, defeating the entire human-in-the-loop control and causing the gated high-risk action (e.g. a shell command the agent was holding for review) to execute without consent. This issue is fixed in v5.12.2. `ApprovalInbox` now accepts a `secret` option. When set, the mutating endpoints `POST /:id/approve` and `POST /:id/deny` require an `Authorization: Bearer <secret>` header, validated in constant time with `crypto.timingSafeEqual`. `startServer()` already binds to `127.0.0.1` by default; operators exposing the inbox on a network must set a secret.

🎖@cveNotify

🚨 CVE-2026-34239
Chamilo version 1.11.40 and earlier are vulnerable to authenticated remote code execution in the main/inc/ajax/lang.ajax.php path. This endpoint is protected only by `api_protect_course_script(true)`, which means any authenticated user enrolled in a course (student, teacher, DRH) can reach it.

🎖@cveNotify

🚨 CVE-2026-39878
Chamilo LMS versions 1.11.38 and earlier contain a stored cross-site scripting vulnerability in the user registration form that allows any unauthenticated attacker to execute arbitrary JavaScript in an administrator's browser session, leading to full platform admin account takeover. This has been patched in 1.11.40.

🎖@cveNotify

🚨 CVE-2026-44227
RT is an open source, enterprise-grade issue and ticket tracking system. Versions 6.0.0 and above, prior to 6.0.3 contain a reflected Cross-Site Scripting (XSS) vulnerability. An attacker who can induce an authenticated RT user to visit a crafted URL can execute arbitrary JavaScript in that user's browser session. There are no effective workarounds. Avoid following untrusted RT URLs. This issue has been fixed in version 6.0.3.

🎖@cveNotify

🚨 CVE-2026-44228
RT is an open source, enterprise-grade issue and ticket tracking system. Versions 6.0.0 and above, prior to 6.0.3, contain a stored Cross-Site Scripting (XSS) vulnerability, where user-controlled data is rendered without proper HTML escaping. An authenticated user with permission to set the relevant data can inject JavaScript that executes when another RT user views the affected page. This issue has been fixed in version 6.0.3.

🎖@cveNotify

🚨 CVE-2026-45295
FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.219, the open tracking endpoint `GET /thread/read/{conversation_id}/{thread_id}` allows unauthenticated attackers to enumerate valid conversation and thread IDs, and modify thread state (`opened_at` timestamp) without any authentication. Version 1.8.219 patches the issue.

🎖@cveNotify

🚨 CVE-2026-46715
Flask-Security-Too allows users to add security features to their Flask applicationa. Version 5.8.0's OAuth reauthentication flow can mark a session as fresh after verifying an OAuth account that belongs to a different user. If an attacker can operate an already-authenticated but stale victim session, they can complete OAuth verification using their own OAuth identity. The victim session is then treated as recently reauthenticated, allowing freshness-protected account actions to proceed. Version 5.8.1 contains a fix for this issue.

🎖@cveNotify