🚨 CVE-2026-64191
In the Linux kernel, the following vulnerability has been resolved:
i2c: stub: Reject I2C block transfers with invalid length
The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]
as the transfer length. The existing check only clamps it to avoid
overrunning the chip->words[256] register array, but does not validate
it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union
i2c_smbus_data.block buffer (34 bytes total). The driver is a
development/test tool (CONFIG_I2C_STUB=m, not built by default)
that must be loaded with a chip_addr= parameter.
A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl
with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing
stub_xfer() to read or write past the end of the union
i2c_smbus_data.block buffer:
BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223)
Read of size 1 at addr ffff88800abcfd92 by task exploit/81
Call Trace:
<TASK>
stub_xfer (drivers/i2c/i2c-stub.c:223)
__i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593)
i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536)
i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391)
i2cdev_ioctl (drivers/i2c/i2c-dev.c:478)
__x64_sys_ioctl (fs/ioctl.c:583)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
The bug exists because i2c-stub implements .smbus_xfer directly,
bypassing the I2C_SMBUS_BLOCK_MAX validation in
i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same
function correctly validates against I2C_SMBUS_BLOCK_MAX, but the
I2C_SMBUS_I2C_BLOCK_DATA case does not.
Fix by rejecting transfers with data->block[0] == 0 or
data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with
both the I2C_SMBUS_BLOCK_DATA case in the same function and the
I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated().
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
i2c: stub: Reject I2C block transfers with invalid length
The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]
as the transfer length. The existing check only clamps it to avoid
overrunning the chip->words[256] register array, but does not validate
it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union
i2c_smbus_data.block buffer (34 bytes total). The driver is a
development/test tool (CONFIG_I2C_STUB=m, not built by default)
that must be loaded with a chip_addr= parameter.
A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl
with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing
stub_xfer() to read or write past the end of the union
i2c_smbus_data.block buffer:
BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223)
Read of size 1 at addr ffff88800abcfd92 by task exploit/81
Call Trace:
<TASK>
stub_xfer (drivers/i2c/i2c-stub.c:223)
__i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593)
i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536)
i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391)
i2cdev_ioctl (drivers/i2c/i2c-dev.c:478)
__x64_sys_ioctl (fs/ioctl.c:583)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
The bug exists because i2c-stub implements .smbus_xfer directly,
bypassing the I2C_SMBUS_BLOCK_MAX validation in
i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same
function correctly validates against I2C_SMBUS_BLOCK_MAX, but the
I2C_SMBUS_I2C_BLOCK_DATA case does not.
Fix by rejecting transfers with data->block[0] == 0 or
data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with
both the I2C_SMBUS_BLOCK_DATA case in the same function and the
I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated().
🎖@cveNotify
🚨 CVE-2026-64192
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized
When CONFIG_BPF_LSM=y is set, BPF inode storage maps
(BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However,
if the BPF LSM is not explicitly enabled at boot time (e.g. omitted
from the "lsm=" boot parameter), lsm_prepare() is never executed for
the BPF LSM.
Consequently, the BPF inode security blob offset
(bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at
its default compiled size of 8 bytes instead of being updated to a
valid offset past the reserved struct rcu_head (typically 16 bytes
or more).
When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE
map, bpf_inode() evaluates inode->i_security + 8. This erroneously
aliases the struct rcu_head.func callback pointer at the beginning
of the inode->i_security blob. During subsequent map element cleanup
or inode destruction, writing NULL to owner_storage clears the queued
RCU callback pointer. When rcu_do_batch() later executes the queued
callback, it attempts an instruction fetch at address 0x0, triggering
an immediate kernel panic.
Fix this by introducing a global bpf_lsm_initialized boolean flag
marked with __ro_after_init. Set this flag to true inside bpf_lsm_init()
when the LSM framework successfully registers the BPF LSM. Gate map
allocation in inode_storage_map_alloc() on this flag, returning
-EOPNOTSUPP if the BPF LSM is in turn uninitialized.
This fail-fast approach prevents userspace from allocating inode
storage maps when the supporting BPF LSM infrastructure is absent,
avoiding zombie map states.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized
When CONFIG_BPF_LSM=y is set, BPF inode storage maps
(BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However,
if the BPF LSM is not explicitly enabled at boot time (e.g. omitted
from the "lsm=" boot parameter), lsm_prepare() is never executed for
the BPF LSM.
Consequently, the BPF inode security blob offset
(bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at
its default compiled size of 8 bytes instead of being updated to a
valid offset past the reserved struct rcu_head (typically 16 bytes
or more).
When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE
map, bpf_inode() evaluates inode->i_security + 8. This erroneously
aliases the struct rcu_head.func callback pointer at the beginning
of the inode->i_security blob. During subsequent map element cleanup
or inode destruction, writing NULL to owner_storage clears the queued
RCU callback pointer. When rcu_do_batch() later executes the queued
callback, it attempts an instruction fetch at address 0x0, triggering
an immediate kernel panic.
Fix this by introducing a global bpf_lsm_initialized boolean flag
marked with __ro_after_init. Set this flag to true inside bpf_lsm_init()
when the LSM framework successfully registers the BPF LSM. Gate map
allocation in inode_storage_map_alloc() on this flag, returning
-EOPNOTSUPP if the BPF LSM is in turn uninitialized.
This fail-fast approach prevents userspace from allocating inode
storage maps when the supporting BPF LSM infrastructure is absent,
avoiding zombie map states.
🎖@cveNotify
🚨 CVE-2026-64205
In the Linux kernel, the following vulnerability has been resolved:
i2c: i801: fix hardware state machine corruption in error path
A severe livelock and subsequent Hung Task panic were observed in the
i2c-i801 driver during concurrent Fuzzing. The crash is caused by an
unconditional hardware register cleanup in the error handling path of
i801_access().
When i801_check_pre() fails (e.g., returning -EBUSY because the SMBus
controller is actively used by BIOS/ACPI), the kernel does not actually
acquire the hardware ownership. However, the code jumps to the 'out'
label and executes:
iowrite8(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv));
This forcefully clears the INUSE_STS lock and resets the hardware status
flags without owning the controller. Doing so interrupts ongoing BIOS/ACPI
transactions and totally corrupts the SMBus hardware state machine.
Consequently, all subsequent i801_access() calls fail at the pre-check
stage, triggering an endless stream of "SMBus is busy, can't use it!"
error logs. Over a slow serial console, this printk flood monopolizes
the CPU (Console Livelock), starving other processes trying to acquire
the mmap_lock down_read semaphore, ultimately triggering the hung task
watchdog.
Fix this by moving the 'out' label below the hardware register cleanup.
If i801_check_pre() fails, we safely bypass the iowrite8() and only
release the software locks (pm_runtime and mutex), strictly adhering to
the rule of not releasing resources that were never acquired.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
i2c: i801: fix hardware state machine corruption in error path
A severe livelock and subsequent Hung Task panic were observed in the
i2c-i801 driver during concurrent Fuzzing. The crash is caused by an
unconditional hardware register cleanup in the error handling path of
i801_access().
When i801_check_pre() fails (e.g., returning -EBUSY because the SMBus
controller is actively used by BIOS/ACPI), the kernel does not actually
acquire the hardware ownership. However, the code jumps to the 'out'
label and executes:
iowrite8(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv));
This forcefully clears the INUSE_STS lock and resets the hardware status
flags without owning the controller. Doing so interrupts ongoing BIOS/ACPI
transactions and totally corrupts the SMBus hardware state machine.
Consequently, all subsequent i801_access() calls fail at the pre-check
stage, triggering an endless stream of "SMBus is busy, can't use it!"
error logs. Over a slow serial console, this printk flood monopolizes
the CPU (Console Livelock), starving other processes trying to acquire
the mmap_lock down_read semaphore, ultimately triggering the hung task
watchdog.
Fix this by moving the 'out' label below the hardware register cleanup.
If i801_check_pre() fails, we safely bypass the iowrite8() and only
release the software locks (pm_runtime and mutex), strictly adhering to
the rule of not releasing resources that were never acquired.
🎖@cveNotify
🚨 CVE-2026-64206
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock
l2cap_conn_del() takes conn->lock and then calls cancel_work_sync() for
pending_rx_work. process_pending_rx() takes the same mutex, so teardown
can deadlock against the worker it is flushing.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the l2cap_conn_ready() -> queue_work(...,
&conn->pending_rx_work) submit path, the l2cap_conn_del() ->
cancel_work_sync(&conn->pending_rx_work) teardown path, and the
process_pending_rx() -> mutex_lock(&conn->lock) worker edge. Lockdep
WARNING: possible circular locking dependency detected
process_pending_rx+0x21/0x2a [vuln_msv]
l2cap_conn_del.constprop.0+0x3f/0x4e [vuln_msv]
*** DEADLOCK ***
Cancel pending_rx_work before taking conn->lock, matching the existing
lock-before-drain ordering used for the two delayed works in the same
teardown path. The pending_rx queue is still purged after the work has
been cancelled and conn->lock has been acquired.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock
l2cap_conn_del() takes conn->lock and then calls cancel_work_sync() for
pending_rx_work. process_pending_rx() takes the same mutex, so teardown
can deadlock against the worker it is flushing.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the l2cap_conn_ready() -> queue_work(...,
&conn->pending_rx_work) submit path, the l2cap_conn_del() ->
cancel_work_sync(&conn->pending_rx_work) teardown path, and the
process_pending_rx() -> mutex_lock(&conn->lock) worker edge. Lockdep
WARNING: possible circular locking dependency detected
process_pending_rx+0x21/0x2a [vuln_msv]
l2cap_conn_del.constprop.0+0x3f/0x4e [vuln_msv]
*** DEADLOCK ***
Cancel pending_rx_work before taking conn->lock, matching the existing
lock-before-drain ordering used for the two delayed works in the same
teardown path. The pending_rx queue is still purged after the work has
been cancelled and conn->lock has been acquired.
🎖@cveNotify
🚨 CVE-2026-64207
In the Linux kernel, the following vulnerability has been resolved:
net/sched: dualpi2: fix GSO backlog accounting
When DualPI2 splits a GSO skb into N segments, it propagates N
additional packets to its parent before returning NET_XMIT_SUCCESS.
The parent then accounts for the original skb once more, leaving its
qlen one larger than the number of packets actually queued.
With QFQ as the parent, after all real packets are dequeued, QFQ still
has a non-zero qlen while its in-service aggregate has no active
classes. qfq_choose_next_agg() returns NULL and qfq_dequeue() passes
the result to qfq_peek_skb(), causing a NULL pointer dereference.
Follow the same pattern used by tbf_segment() and taprio: count only
successfully queued segments, propagate the difference between the
original skb and those segments, and return NET_XMIT_SUCCESS whenever
at least one segment was queued.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net/sched: dualpi2: fix GSO backlog accounting
When DualPI2 splits a GSO skb into N segments, it propagates N
additional packets to its parent before returning NET_XMIT_SUCCESS.
The parent then accounts for the original skb once more, leaving its
qlen one larger than the number of packets actually queued.
With QFQ as the parent, after all real packets are dequeued, QFQ still
has a non-zero qlen while its in-service aggregate has no active
classes. qfq_choose_next_agg() returns NULL and qfq_dequeue() passes
the result to qfq_peek_skb(), causing a NULL pointer dereference.
Follow the same pattern used by tbf_segment() and taprio: count only
successfully queued segments, propagate the difference between the
original skb and those segments, and return NET_XMIT_SUCCESS whenever
at least one segment was queued.
🎖@cveNotify
🚨 CVE-2026-50376
Use of uninitialized resource in Windows RDP allows an unauthorized attacker to disclose information over a network.
🎖@cveNotify
Use of uninitialized resource in Windows RDP allows an unauthorized attacker to disclose information over a network.
🎖@cveNotify
🚨 CVE-2026-50378
Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Key Guard allows an authorized attacker to elevate privileges locally.
🎖@cveNotify
Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Key Guard allows an authorized attacker to elevate privileges locally.
🎖@cveNotify
🚨 CVE-2026-50379
Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Media allows an authorized attacker to elevate privileges over a network.
🎖@cveNotify
Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Media allows an authorized attacker to elevate privileges over a network.
🎖@cveNotify
🚨 CVE-2026-50380
Heap-based buffer overflow in Windows GDI+ allows an unauthorized attacker to execute code over a network.
🎖@cveNotify
Heap-based buffer overflow in Windows GDI+ allows an unauthorized attacker to execute code over a network.
🎖@cveNotify
🚨 CVE-2026-50382
Untrusted pointer dereference in Windows DirectX allows an authorized attacker to execute code locally.
🎖@cveNotify
Untrusted pointer dereference in Windows DirectX allows an authorized attacker to execute code locally.
🎖@cveNotify
🚨 CVE-2026-50383
Buffer over-read in Windows Print Spooler Components allows an authorized attacker to disclose information locally.
🎖@cveNotify
Buffer over-read in Windows Print Spooler Components allows an authorized attacker to disclose information locally.
🎖@cveNotify
🚨 CVE-2026-14499
IBM Langflow OSS 1.0.0 through 1.10.1 Langflow could allow an authenticated user to execute arbitrary commands with elevated privileges on the system due to improper validation of user supplied input in the Python Interpreter component.
🎖@cveNotify
IBM Langflow OSS 1.0.0 through 1.10.1 Langflow could allow an authenticated user to execute arbitrary commands with elevated privileges on the system due to improper validation of user supplied input in the Python Interpreter component.
🎖@cveNotify
Ibm
Security Bulletin: Langflow is affected by remote code execution, denial of service, path traversal, and exposed credentials due…
Langflow provides a visual interface for constructing and executing AI-powered agent workflows, exposing HTTP API endpoints for flow execution, file management, vector store operations, and Model Context Protocol (MCP) server configuration. An attacker could…
🚨 CVE-2026-7667
IBM Langflow OSS 1.0.0 through 1.10.0 allows an authenticated attacker to create a malicious flow pointing to an attacker-controlled URL that returns a specially crafted Content-Disposition header (e.g., filename="../../../target/path" ), enabling arbitrary file write operations with attacker-controlled content to any path accessible by the Langflow process.
🎖@cveNotify
IBM Langflow OSS 1.0.0 through 1.10.0 allows an authenticated attacker to create a malicious flow pointing to an attacker-controlled URL that returns a specially crafted Content-Disposition header (e.g., filename="../../../target/path" ), enabling arbitrary file write operations with attacker-controlled content to any path accessible by the Langflow process.
🎖@cveNotify
Ibm
Security Bulletin: Path Traversal Vulnerability in API Request Component Content-Disposition Header Processing
A path traversal vulnerability existed in the API Request component's response handling logic. An authenticated attacker could craft a malicious server response with a specially crafted Content-Disposition header containing directory traversal sequences.…
🚨 CVE-2026-7754
IBM Langflow OSS 1.0.0 through 1.10.0 Langflow 1.9.0 could allow server-side request forgery (SSRF) due to insecure default configuration and incomplete enforcement of the SSRF protection mechanism.
🎖@cveNotify
IBM Langflow OSS 1.0.0 through 1.10.0 Langflow 1.9.0 could allow server-side request forgery (SSRF) due to insecure default configuration and incomplete enforcement of the SSRF protection mechanism.
🎖@cveNotify
Ibm
Security Bulletin: SSRF Protection Configuration Vulnerability
A configuration vulnerability was identified where SSRF (Server-Side Request Forgery) protection could be disabled through default settings, potentially allowing authenticated users to make the server fetch arbitrary URLs including cloud metadata endpoints…
🚨 CVE-2026-7755
IBM Langflow OSS 1.0.0 through 1.10.0 Langflow could allow remote code execution due to incomplete validation enforcement on MCP server configuration files.
🎖@cveNotify
IBM Langflow OSS 1.0.0 through 1.10.0 Langflow could allow remote code execution due to incomplete validation enforcement on MCP server configuration files.
🎖@cveNotify
Ibm
Security Bulletin: MCP Server Configuration Validator Bypass via File Upload API
A validation bypass vulnerability existed in the File Manager API that could allow an authenticated attacker to upload malicious MCP server configurations. The file upload endpoint accepted _mcp_servers_<user_id>.json files without invoking the MCPServerConfig…
🚨 CVE-2026-7872
IBM Langflow OSS 1.0.0 through 1.10.0 allows an authenticated attacker to read arbitrary files including the JWT signing key and forge authentication tokens for any user.
🎖@cveNotify
IBM Langflow OSS 1.0.0 through 1.10.0 allows an authenticated attacker to read arbitrary files including the JWT signing key and forge authentication tokens for any user.
🎖@cveNotify
Ibm
Security Bulletin: Path Traversal Vulnerability in File Component Leading to Arbitrary File Read and Authentication Bypass
A path traversal vulnerability existed in the File component's tar archive extraction functionality. An authenticated user could upload a specially crafted tar archive containing symbolic links to read arbitrary files accessible to the application process.…
🚨 CVE-2026-8056
IBM Langflow OSS 1.0.0 through 1.10.0 allows authenticated users to override component parameters at runtime via the API. A critical security flaw exists in the parameter filtering mechanism within the `apply_tweaks()` function.
🎖@cveNotify
IBM Langflow OSS 1.0.0 through 1.10.0 allows authenticated users to override component parameters at runtime via the API. A critical security flaw exists in the parameter filtering mechanism within the `apply_tweaks()` function.
🎖@cveNotify
Ibm
Security Bulletin: Parameter Injection Vulnerability in API Graph Execution Engine
A parameter injection vulnerability existed in the API Graph Execution Engine's tweaks processing mechanism. The vulnerability allowed authenticated attackers to bypass security controls and inject malicious parameters into flow components at runtime. An…
🚨 CVE-2026-8476
IBM Langflow OSS 1.0.0 through 1.10.0 contain a critical remote code execution vulnerability in the disk-based caching mechanism. The AsyncDiskCache class uses Python's unsafe pickle.loads() function to deserialize cached objects from disk without validation, integrity verification, or authentication, enabling arbitrary code execution when malicious pickle payloads are processed. Attackers who can influence cached data through file system access, malicious workflow inputs, custom components, or API manipulation can achieve complete system compromise with the privileges of the Langflow server process.
🎖@cveNotify
IBM Langflow OSS 1.0.0 through 1.10.0 contain a critical remote code execution vulnerability in the disk-based caching mechanism. The AsyncDiskCache class uses Python's unsafe pickle.loads() function to deserialize cached objects from disk without validation, integrity verification, or authentication, enabling arbitrary code execution when malicious pickle payloads are processed. Attackers who can influence cached data through file system access, malicious workflow inputs, custom components, or API manipulation can achieve complete system compromise with the privileges of the Langflow server process.
🎖@cveNotify
Ibm
Security Bulletin: Disk Cache Deserialization Remote Code Execution Vulnerability
A remote code execution vulnerability was discovered in the disk-based caching mechanism. The vulnerability arose from unsafe deserialization of pickle data in cache services, which processed cached items without validation or integrity checks. An attacker…
🚨 CVE-2026-8481
IBM Langflow OSS 1.0.0 through 1.10.0 contain a critical remote code execution vulnerability in the code validation API endpoint. The POST /api/v1/validate/code endpoint accepts user-supplied Python code and executes it directly using Python's built-in exec() function without sandboxing, input validation, or privilege restrictions, enabling any authenticated user to execute arbitrary system commands with the full privileges of the Langflow server process.
🎖@cveNotify
IBM Langflow OSS 1.0.0 through 1.10.0 contain a critical remote code execution vulnerability in the code validation API endpoint. The POST /api/v1/validate/code endpoint accepts user-supplied Python code and executes it directly using Python's built-in exec() function without sandboxing, input validation, or privilege restrictions, enabling any authenticated user to execute arbitrary system commands with the full privileges of the Langflow server process.
🎖@cveNotify
Ibm
Security Bulletin: Remote Code Execution via Code Validation Endpoint
A remote code execution vulnerability existed in the code validation endpoint where authenticated users could execute arbitrary code with server privileges. The vulnerability occurred because the validation process compiled and executed user-submitted code…
🚨 CVE-2026-8505
IBM Langflow OSS 1.0.0 through 1.10.0 has a vulnerability in Langflow's webhook authentication logic allows unauthenticated users to trigger the execution of any flow. The system incorrectly bypasses API key validation when the WEBHOOK_AUTH_ENABLE configuration is set to False (which is the default setting). This allows a remote attacker who knows a flow's UUID to execute it as if they were the owner, potentially leading to Remote Code Execution (RCE).
🎖@cveNotify
IBM Langflow OSS 1.0.0 through 1.10.0 has a vulnerability in Langflow's webhook authentication logic allows unauthenticated users to trigger the execution of any flow. The system incorrectly bypasses API key validation when the WEBHOOK_AUTH_ENABLE configuration is set to False (which is the default setting). This allows a remote attacker who knows a flow's UUID to execute it as if they were the owner, potentially leading to Remote Code Execution (RCE).
🎖@cveNotify
Ibm
Security Bulletin: Authentication Bypass in Webhook Endpoints Allowed Unauthorized Flow Execution
A vulnerability in the webhook authentication logic allowed unauthenticated users to trigger execution of any flow. The system incorrectly bypassed API key validation when the WEBHOOK_AUTH_ENABLE configuration was set to False (the default setting), allowing…
🚨 CVE-2026-8635
IBM Langflow OSS 1.0.0 through 1.10.0 allows authenticated users to escalate privileges to superuser by directly manipulating the database, execute arbitrary system commands, and achieve full system compromise with Langflow service permissions.
🎖@cveNotify
IBM Langflow OSS 1.0.0 through 1.10.0 allows authenticated users to escalate privileges to superuser by directly manipulating the database, execute arbitrary system commands, and achieve full system compromise with Langflow service permissions.
🎖@cveNotify
Ibm
Security Bulletin: Arbitrary Code Execution in Python Interpreter Component
A vulnerability in the Python Interpreter component allowed authenticated users to execute arbitrary Python code and escalate privileges to superuser level. An attacker with valid credentials could bypass security controls through the PythonREPLComponent…