🚨 CVE-2026-29785
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.14 and 2.12.5, if the nats-server has the "leafnode" configuration enabled (not default), then anyone who can connect can crash the nats-server by triggering a panic. This happens pre-authentication and requires that compression be enabled (which it is, by default, when leafnodes are used). Versions 2.11.14 and 2.12.5 contain a fix. As a workaround, disable compression on the leafnode port.

🎖@cveNotify

🚨 CVE-2026-33216
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, for MQTT deployments using usercodes/passwords: MQTT passwords are incorrectly classified as a non-authenticating identity statement (JWT) and exposed via monitoring endpoints. Versions 2.11.14 and 2.12.6 contain a fix. As a workaround, ensure monitoring end-points are adequately secured. Best practice remains to not expose the monitoring endpoint to the Internet or other untrusted network users.

🎖@cveNotify

🚨 CVE-2026-33217
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, when using ACLs on message subjects, these ACLs were not applied in the `$MQTT.>` namespace, allowing MQTT clients to bypass ACL checks for MQTT subjects. Versions 2.11.15 and 2.12.6 contain a fix. No known workarounds are available.

🎖@cveNotify

🚨 CVE-2026-33218
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, a client which can connect to the leafnode port can crash the nats-server with a certain malformed message pre-authentication. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, disable leafnode support if not needed or restrict network connections to the leafnode port, if plausible without compromising the service offered.

🎖@cveNotify

🚨 CVE-2026-33219
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, a malicious client which can connect to the WebSockets port can cause unbounded memory use in the nats-server before authentication; this requires sending a corresponding amount of data. This is a milder variant of CVE-2026-27571. That earlier issue was a compression bomb, this vulnerability is not. Attacks against this new issue thus require significant client bandwidth. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, disable websockets if not required for project deployment.

🎖@cveNotify

🚨 CVE-2026-33247
NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, if a nats-server is run with static credentials for all clients provided via argv (the command-line), then those credentials are visible to any user who can see the monitoring port, if that too is enabled. The `/debug/vars` end-point contains an unredacted copy of argv. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, configure credentials inside a configuration file instead of via argv, and do not enable the monitoring port if using secrets in argv. Best practice remains to not expose the monitoring port to the Internet, or to untrusted network sources.

🎖@cveNotify

🚨 CVE-2026-33487
goxmlsig provides XML Digital Signatures implemented in Go. Prior to version 1.6.0, the `validateSignature` function in `validate.go` goes through the references in the `SignedInfo` block to find one that matches the signed element's ID. In Go versions before 1.22, or when `go.mod` uses an older version, there is a loop variable capture issue. The code takes the address of the loop variable `_ref` instead of its value. As a result, if more than one reference matches the ID or if the loop logic is incorrect, the `ref` pointer will always end up pointing to the last element in the `SignedInfo.References` slice after the loop. goxmlsig version 1.6.0 contains a patch.

🎖@cveNotify

🚨 CVE-2026-32285
The Delete function fails to properly validate offsets when processing malformed JSON input. This can lead to a negative slice index and a runtime panic, allowing a denial of service attack.

🎖@cveNotify

🚨 CVE-2026-32286
The DataRow.Decode function fails to properly validate field lengths. A malicious or compromised PostgreSQL server can send a DataRow message with a negative field length, causing a slice bounds out of range panic.

🎖@cveNotify

🚨 CVE-2026-33894
Forge (also called `node-forge`) is a native implementation of Transport Layer Security in JavaScript. Prior to version 1.4.0, RSASSA PKCS#1 v1.5 signature verification accepts forged signatures for low public exponent keys (e=3). Attackers can forge signatures by stuffing “garbage” bytes within the ASN structure in order to construct a signature that passes verification, enabling Bleichenbacher style forgery. This issue is similar to CVE-2022-24771, but adds bytes in an addition field within the ASN structure, rather than outside of it. Additionally, forge does not validate that signatures include a minimum of 8 bytes of padding as defined by the specification, providing attackers additional space to construct Bleichenbacher forgeries. Version 1.4.0 patches the issue.

🎖@cveNotify

🚨 CVE-2026-33997
Moby is an open source container framework. Prior to version 29.3.1, a security vulnerability has been detected that allows plugins privilege validation to be bypassed during docker plugin install. Due to an error in the daemon's privilege comparison logic, the daemon may incorrectly accept a privilege set that differs from the one approved by the user. Plugins that request exactly one privilege are also affected, because no comparison is performed at all. This issue has been patched in version 29.3.1.

🎖@cveNotify

🚨 CVE-2026-4800
Impact:

The fix for CVE-2021-23337 (https://github.com/advisories/GHSA-35jh-r3h4-6jhm) added validation for the variable option in _.template but did not apply the same validation to options.imports key names. Both paths flow into the same Function() constructor sink.

When an application passes untrusted input as options.imports key names, an attacker can inject default-parameter expressions that execute arbitrary code at template compilation time.

Additionally, _.template uses assignInWith to merge imports, which enumerates inherited properties via for..in. If Object.prototype has been polluted by any other vector, the polluted keys are copied into the imports object and passed to Function().

Patches:

Users should upgrade to version 4.18.0.

Workarounds:

Do not pass untrusted input as key names in options.imports. Only use developer-controlled, static key names.

🎖@cveNotify

🚨 CVE-2026-34986
Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. Prior to 4.1.4 and 3.0.5, decrypting a JSON Web Encryption (JWE) object will panic if the alg field indicates a key wrapping algorithm (one ending in KW, with the exception of A128GCMKW, A192GCMKW, and A256GCMKW) and the encrypted_key field is empty. The panic happens when cipher.KeyUnwrap() in key_wrap.go attempts to allocate a slice with a zero or negative length based on the length of the encrypted_key. This code path is reachable from ParseEncrypted() / ParseEncryptedJSON() / ParseEncryptedCompact() followed by Decrypt() on the resulting object. Note that the parse functions take a list of accepted key algorithms. If the accepted key algorithms do not include any key wrapping algorithms, parsing will fail and the application will be unaffected. This panic is also reachable by calling cipher.KeyUnwrap() directly with any ciphertext parameter less than 16 bytes long, but calling this function directly is less common. Panics can lead to denial of service. This vulnerability is fixed in 4.1.4 and 3.0.5.

🎖@cveNotify

🚨 CVE-2026-33815
Memory-safety vulnerability in github.com/jackc/pgx/v5.

🎖@cveNotify

🚨 CVE-2026-29181
OpenTelemetry-Go is the Go implementation of OpenTelemetry. From 1.36.0 to 1.40.0, multi-value baggage: header extraction parses each header field-value independently and aggregates members across values. This allows an attacker to amplify cpu and allocations by sending many baggage: header lines, even when each individual value is within the 8192-byte per-value parse limit. This vulnerability is fixed in 1.41.0.

🎖@cveNotify

🚨 CVE-2026-32280
During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 and users of crypto/tls.

🎖@cveNotify

🚨 CVE-2026-32283
If one side of the TLS connection sends multiple key update messages post-handshake in a single record, the connection can deadlock, causing uncontrolled consumption of resources. This can lead to a denial of service. This only affects TLS 1.3.

🎖@cveNotify

🚨 CVE-2026-33810
When verifying a certificate chain containing excluded DNS constraints, these constraints are not correctly applied to wildcard DNS SANs which use a different case than the constraint. This only affects validation of otherwise trusted certificate chains, issued by a root CA in the VerifyOptions.Roots CertPool, or in the system certificate pool.

🎖@cveNotify

🚨 CVE-2026-5795
In Eclipse Jetty, the class JASPIAuthenticator initiates the authentication checks, which set two ThreadLocal variable.


Upon returning from the initial checks, there are conditions that cause an early return from the JASPIAuthenticator code without clearing those ThreadLocals.


A subsequent request using the same thread inherits the ThreadLocal values, leading to a broken access control and privilege escalation.

🎖@cveNotify

🚨 CVE-2026-2377
A flaw was found in Red Hat Quay and mirror registry for Red Hat OpenShift. The log export feature in these products allows an authenticated user to specify an arbitrary callback URL. A backend process then makes server-side HTTP requests to this provided URL. This vulnerability, known as Server-Side Request Forgery (SSRF), could allow an attacker to send requests from the application's internal network, potentially leading to the disclosure of sensitive information.

🎖@cveNotify

🚨 CVE-2026-32589
A flaw was found in Red Hat Quay's container image upload process. An authenticated user with push access to any repository on the registry can interfere with image uploads in progress by other users, including those in repositories they do not have access to. This could allow the attacker to read, modify, or cancel another user's in-progress image upload.

🎖@cveNotify