🚨 CVE-2026-42009
A flaw was found in gnutls. A remote attacker could exploit an issue in the Datagram Transport Layer Security (DTLS) packet reordering logic. The comparator function, responsible for ordering DTLS packets by sequence numbers, did not correctly handle packets with duplicate sequence numbers. This could lead to unstable packet ordering or undefined behavior, resulting in a denial of service.
🎖@cveNotify
A flaw was found in gnutls. A remote attacker could exploit an issue in the Datagram Transport Layer Security (DTLS) packet reordering logic. The comparator function, responsible for ordering DTLS packets by sequence numbers, did not correctly handle packets with duplicate sequence numbers. This could lead to unstable packet ordering or undefined behavior, resulting in a denial of service.
🎖@cveNotify
🚨 CVE-2026-49791
Improper link resolution before file access ('link following') in Windows Routing and Remote Access Service (RRAS) allows an authorized attacker to elevate privileges locally.
🎖@cveNotify
Improper link resolution before file access ('link following') in Windows Routing and Remote Access Service (RRAS) allows an authorized attacker to elevate privileges locally.
🎖@cveNotify
🚨 CVE-2024-12085
A flaw was found in rsync which could be triggered when rsync compares file checksums. This flaw allows an attacker to manipulate the checksum length (s2length) to cause a comparison between a checksum and uninitialized memory and leak one byte of uninitialized stack data at a time.
🎖@cveNotify
A flaw was found in rsync which could be triggered when rsync compares file checksums. This flaw allows an attacker to manipulate the checksum length (s2length) to cause a comparison between a checksum and uninitialized memory and leak one byte of uninitialized stack data at a time.
🎖@cveNotify
🚨 CVE-2025-5914
A vulnerability has been identified in the libarchive library, specifically within the archive_read_format_rar_seek_data() function. This flaw involves an integer overflow that can ultimately lead to a double-free condition. Exploiting a double-free vulnerability can result in memory corruption, enabling an attacker to execute arbitrary code or cause a denial-of-service condition.
🎖@cveNotify
A vulnerability has been identified in the libarchive library, specifically within the archive_read_format_rar_seek_data() function. This flaw involves an integer overflow that can ultimately lead to a double-free condition. Exploiting a double-free vulnerability can result in memory corruption, enabling an attacker to execute arbitrary code or cause a denial-of-service condition.
🎖@cveNotify
🚨 CVE-2025-6020
A flaw was found in linux-pam. The module pam_namespace may use access user-controlled paths without proper protection, allowing local users to elevate their privileges to root via multiple symlink attacks and race conditions.
🎖@cveNotify
A flaw was found in linux-pam. The module pam_namespace may use access user-controlled paths without proper protection, allowing local users to elevate their privileges to root via multiple symlink attacks and race conditions.
🎖@cveNotify
🚨 CVE-2025-7425
A flaw was found in libxslt where the attribute type, atype, flags are modified in a way that corrupts internal memory management. When XSLT functions, such as the key() process, result in tree fragments, this corruption prevents the proper cleanup of ID attributes. As a result, the system may access freed memory, causing crashes or enabling attackers to trigger heap corruption.
🎖@cveNotify
A flaw was found in libxslt where the attribute type, atype, flags are modified in a way that corrupts internal memory management. When XSLT functions, such as the key() process, result in tree fragments, this corruption prevents the proper cleanup of ID attributes. As a result, the system may access freed memory, causing crashes or enabling attackers to trigger heap corruption.
🎖@cveNotify
🚨 CVE-2026-49790
Windows Universal Disk Format File System Driver (UDFS) Elevation of Privilege Vulnerability
🎖@cveNotify
Windows Universal Disk Format File System Driver (UDFS) Elevation of Privilege Vulnerability
🎖@cveNotify
🚨 CVE-2026-49793
Heap-based buffer overflow in Windows Resilient File System (ReFS) allows an authorized attacker to execute code locally.
🎖@cveNotify
Heap-based buffer overflow in Windows Resilient File System (ReFS) allows an authorized attacker to execute code locally.
🎖@cveNotify
🚨 CVE-2026-49789
Stack-based buffer overflow in Windows NTFS allows an authorized attacker to elevate privileges locally.
🎖@cveNotify
Stack-based buffer overflow in Windows NTFS allows an authorized attacker to elevate privileges locally.
🎖@cveNotify
🚨 CVE-2026-49792
Numeric truncation error in Windows Resilient File System (ReFS) allows an authorized attacker to execute code locally.
🎖@cveNotify
Numeric truncation error in Windows Resilient File System (ReFS) allows an authorized attacker to execute code locally.
🎖@cveNotify
👍1
🚨 CVE-2024-21626
runc is a CLI tool for spawning and running containers on Linux according to the OCI specification. In runc 1.1.11 and earlier, due to an internal file descriptor leak, an attacker could cause a newly-spawned container process (from runc exec) to have a working directory in the host filesystem namespace, allowing for a container escape by giving access to the host filesystem ("attack 2"). The same attack could be used by a malicious image to allow a container process to gain access to the host filesystem through runc run ("attack 1"). Variants of attacks 1 and 2 could be also be used to overwrite semi-arbitrary host binaries, allowing for complete container escapes ("attack 3a" and "attack 3b"). runc 1.1.12 includes patches for this issue.
🎖@cveNotify
runc is a CLI tool for spawning and running containers on Linux according to the OCI specification. In runc 1.1.11 and earlier, due to an internal file descriptor leak, an attacker could cause a newly-spawned container process (from runc exec) to have a working directory in the host filesystem namespace, allowing for a container escape by giving access to the host filesystem ("attack 2"). The same attack could be used by a malicious image to allow a container process to gain access to the host filesystem through runc run ("attack 1"). Variants of attacks 1 and 2 could be also be used to overwrite semi-arbitrary host binaries, allowing for complete container escapes ("attack 3a" and "attack 3b"). runc 1.1.12 includes patches for this issue.
🎖@cveNotify
packetstorm.news
Packet Storm Security
Packet Storm Security provides security news, exploits, advisories, and tools for information security professionals.
🚨 CVE-2025-7195
Early versions of Operator-SDK provided an insecure method to allow operator containers to run in environments that used a random UID. Operator-SDK before 0.15.2 provided a script, user_setup, which modifies the permissions of the /etc/passwd file to 664 during build time. Developers who used Operator-SDK before 0.15.2 to scaffold their operator may still be impacted by this if the insecure user_setup script is still being used to build new container images.
In affected images, the /etc/passwd file is created during build time with group-writable permissions and a group ownership of root (gid=0). An attacker who can execute commands within an affected container, even as a non-root user, may be able to leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.
🎖@cveNotify
Early versions of Operator-SDK provided an insecure method to allow operator containers to run in environments that used a random UID. Operator-SDK before 0.15.2 provided a script, user_setup, which modifies the permissions of the /etc/passwd file to 664 during build time. Developers who used Operator-SDK before 0.15.2 to scaffold their operator may still be impacted by this if the insecure user_setup script is still being used to build new container images.
In affected images, the /etc/passwd file is created during build time with group-writable permissions and a group ownership of root (gid=0). An attacker who can execute commands within an affected container, even as a non-root user, may be able to leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.
🎖@cveNotify
🚨 CVE-2025-68428
jsPDF is a library to generate PDFs in JavaScript. Prior to version 4.0.0, user control of the first argument of the loadFile method in the node.js build allows local file inclusion/path traversal. If given the possibility to pass unsanitized paths to the loadFile method, a user can retrieve file contents of arbitrary files in the local file system the node process is running in. The file contents are included verbatim in the generated PDFs. Other affected methods are `addImage`, `html`, and `addFont`. Only the node.js builds of the library are affected, namely the `dist/jspdf.node.js` and `dist/jspdf.node.min.js` files. The vulnerability has been fixed in jsPDF@4.0.0. This version restricts file system access per default. This semver-major update does not introduce other breaking changes. Some workarounds areavailable. With recent node versions, jsPDF recommends using the `--permission` flag in production. The feature was introduced experimentally in v20.0.0 and is stable since v22.13.0/v23.5.0/v24.0.0. For older node versions, sanitize user-provided paths before passing them to jsPDF.
🎖@cveNotify
jsPDF is a library to generate PDFs in JavaScript. Prior to version 4.0.0, user control of the first argument of the loadFile method in the node.js build allows local file inclusion/path traversal. If given the possibility to pass unsanitized paths to the loadFile method, a user can retrieve file contents of arbitrary files in the local file system the node process is running in. The file contents are included verbatim in the generated PDFs. Other affected methods are `addImage`, `html`, and `addFont`. Only the node.js builds of the library are affected, namely the `dist/jspdf.node.js` and `dist/jspdf.node.min.js` files. The vulnerability has been fixed in jsPDF@4.0.0. This version restricts file system access per default. This semver-major update does not introduce other breaking changes. Some workarounds areavailable. With recent node versions, jsPDF recommends using the `--permission` flag in production. The feature was introduced experimentally in v20.0.0 and is stable since v22.13.0/v23.5.0/v24.0.0. For older node versions, sanitize user-provided paths before passing them to jsPDF.
🎖@cveNotify
GitHub
restrict file system access in node build (#3931) · parallax/jsPDF@a688c8f
- add jsPDF.allowFsRead property as fs read whitelist
- read files only if node --permission flag or allowFsRead are enabled
- read files only if node --permission flag or allowFsRead are enabled
🚨 CVE-2026-21441
urllib3 is an HTTP client library for Python. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. urllib3 can perform decoding or decompression based on the HTTP `Content-Encoding` header (e.g., `gzip`, `deflate`, `br`, or `zstd`). When using the streaming API, the library decompresses only the necessary bytes, enabling partial content consumption. Starting in version 1.22 and prior to version 2.6.3, for HTTP redirect responses, the library would read the entire response body to drain the connection and decompress the content unnecessarily. This decompression occurred even before any read methods were called, and configured read limits did not restrict the amount of decompressed data. As a result, there was no safeguard against decompression bombs. A malicious server could exploit this to trigger excessive resource consumption on the client. Applications and libraries are affected when they stream content from untrusted sources by setting `preload_content=False` when they do not disable redirects. Users should upgrade to at least urllib3 v2.6.3, in which the library does not decode content of redirect responses when `preload_content=False`. If upgrading is not immediately possible, disable redirects by setting `redirect=False` for requests to untrusted source.
🎖@cveNotify
urllib3 is an HTTP client library for Python. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. urllib3 can perform decoding or decompression based on the HTTP `Content-Encoding` header (e.g., `gzip`, `deflate`, `br`, or `zstd`). When using the streaming API, the library decompresses only the necessary bytes, enabling partial content consumption. Starting in version 1.22 and prior to version 2.6.3, for HTTP redirect responses, the library would read the entire response body to drain the connection and decompress the content unnecessarily. This decompression occurred even before any read methods were called, and configured read limits did not restrict the amount of decompressed data. As a result, there was no safeguard against decompression bombs. A malicious server could exploit this to trigger excessive resource consumption on the client. Applications and libraries are affected when they stream content from untrusted sources by setting `preload_content=False` when they do not disable redirects. Users should upgrade to at least urllib3 v2.6.3, in which the library does not decode content of redirect responses when `preload_content=False`. If upgrading is not immediately possible, disable redirects by setting `redirect=False` for requests to untrusted source.
🎖@cveNotify
GitHub
Merge commit from fork · urllib3/urllib3@8864ac4
* Stop decoding response content during redirects needlessly
* Rename the new query parameter
* Add a changelog entry
* Rename the new query parameter
* Add a changelog entry
🚨 CVE-2026-22029
React Router is a router for React. In @remix-run/router version prior to 1.23.2 and react-router 7.0.0 through 7.11.0, React Router (and Remix v1/v2) SPA open navigation redirects originating from loaders or actions in Framework Mode, Data Mode, or the unstable RSC modes can result in unsafe URLs causing unintended javascript execution on the client. This is only an issue if you are creating redirect paths from untrusted content or via an open redirect. There is no impact if Declarative Mode (<BrowserRouter>) is being used. This issue has been patched in @remix-run/router version 1.23.2 and react-router version 7.12.0.
🎖@cveNotify
React Router is a router for React. In @remix-run/router version prior to 1.23.2 and react-router 7.0.0 through 7.11.0, React Router (and Remix v1/v2) SPA open navigation redirects originating from loaders or actions in Framework Mode, Data Mode, or the unstable RSC modes can result in unsafe URLs causing unintended javascript execution on the client. This is only an issue if you are creating redirect paths from untrusted content or via an open redirect. There is no impact if Declarative Mode (<BrowserRouter>) is being used. This issue has been patched in @remix-run/router version 1.23.2 and react-router version 7.12.0.
🎖@cveNotify
GitHub
XSS via Open Redirects
React Router (and Remix v1/v2) SPA open navigation redirects originating from loaders or actions in [Framework Mode](https://reactrouter.com/start/modes#framework), [Data Mode](https://reactrouter....
🚨 CVE-2026-23490
pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.2, a Denial-of-Service issue has been found that leads to memory exhaustion from malformed RELATIVE-OID with excessive continuation octets. This vulnerability is fixed in 0.6.2.
🎖@cveNotify
pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.2, a Denial-of-Service issue has been found that leads to memory exhaustion from malformed RELATIVE-OID with excessive continuation octets. This vulnerability is fixed in 0.6.2.
🎖@cveNotify
GitHub
Merge commit from fork · pyasn1/pyasn1@3908f14
Add limit of 20 continuation octets per OID arc to prevent a potential memory
exhaustion from excessive continuation bytes input.
exhaustion from excessive continuation bytes input.
🚨 CVE-2026-22797
An issue was discovered in OpenStack keystonemiddleware 10.5 through 10.7 before 10.7.2, 10.8 and 10.9 before 10.9.1, and 10.10 through 10.12 before 10.12.1. The external_oauth2_token middleware fails to sanitize incoming authentication headers before processing OAuth 2.0 tokens. By sending forged identity headers such as X-Is-Admin-Project, X-Roles, or X-User-Id, an authenticated attacker may escalate privileges or impersonate other users. All deployments using the external_oauth2_token middleware are affected.
🎖@cveNotify
An issue was discovered in OpenStack keystonemiddleware 10.5 through 10.7 before 10.7.2, 10.8 and 10.9 before 10.9.1, and 10.10 through 10.12 before 10.12.1. The external_oauth2_token middleware fails to sanitize incoming authentication headers before processing OAuth 2.0 tokens. By sending forged identity headers such as X-Is-Admin-Project, X-Roles, or X-User-Id, an authenticated attacker may escalate privileges or impersonate other users. All deployments using the external_oauth2_token middleware are affected.
🎖@cveNotify
Launchpad
Bug #2129018 “[OSSA-2026-001] Privilege Escalation via Identity ...” : Bugs : keystonemiddleware
external_oauth2_token never clears incoming auth headers; it only sets some, and sets HTTP_X_IS_ADMIN_PROJECT only when true, leaving a spoofed incoming header intact if false.
external_oauth2_token.py:
def process_request(self, request):
"""Process…
external_oauth2_token.py:
def process_request(self, request):
"""Process…
🚨 CVE-2025-56005
An undocumented and unsafe feature in the PLY (Python Lex-Yacc) library 3.11 allows Remote Code Execution (RCE) via the `picklefile` parameter in the `yacc()` function. This parameter accepts a `.pkl` file that is deserialized with `pickle.load()` without validation. Because `pickle` allows execution of embedded code via `__reduce__()`, an attacker can achieve code execution by passing a malicious pickle file. The parameter is not mentioned in official documentation or the GitHub repository, yet it is active in the PyPI version. This introduces a stealthy backdoor and persistence risk. NOTE: A third-party states that this vulnerability should be rejected because the proof of concept does not demonstrate arbitrary code execution and fails to complete successfully.
🎖@cveNotify
An undocumented and unsafe feature in the PLY (Python Lex-Yacc) library 3.11 allows Remote Code Execution (RCE) via the `picklefile` parameter in the `yacc()` function. This parameter accepts a `.pkl` file that is deserialized with `pickle.load()` without validation. Because `pickle` allows execution of embedded code via `__reduce__()`, an attacker can achieve code execution by passing a malicious pickle file. The parameter is not mentioned in official documentation or the GitHub repository, yet it is active in the PyPI version. This introduces a stealthy backdoor and persistence risk. NOTE: A third-party states that this vulnerability should be rejected because the proof of concept does not demonstrate arbitrary code execution and fails to complete successfully.
🎖@cveNotify
GitHub
GitHub - bohmiiidd/Undocumented-RCE-in-PLY: Undocumented RCE in PLY via `picklefile` Parameter
Undocumented RCE in PLY via `picklefile` Parameter - bohmiiidd/Undocumented-RCE-in-PLY
🚨 CVE-2025-13465
Lodash versions 4.0.0 through 4.17.22 are vulnerable to prototype pollution in the _.unset and _.omit functions. An attacker can pass crafted paths which cause Lodash to delete methods from global prototypes.
The issue permits deletion of properties but does not allow overwriting their original behavior.
This issue is patched on 4.17.23
🎖@cveNotify
Lodash versions 4.0.0 through 4.17.22 are vulnerable to prototype pollution in the _.unset and _.omit functions. An attacker can pass crafted paths which cause Lodash to delete methods from global prototypes.
The issue permits deletion of properties but does not allow overwriting their original behavior.
This issue is patched on 4.17.23
🎖@cveNotify
GitHub
Prototype Pollution Vulnerability in Lodash `_.unset` and `_.omit` functions
### Impact
Lodash versions 4.0.0 through 4.17.22 are vulnerable to prototype pollution in the `_.unset` and `_.omit` functions. An attacker can pass crafted paths which cause Lodash to delete me...
Lodash versions 4.0.0 through 4.17.22 are vulnerable to prototype pollution in the `_.unset` and `_.omit` functions. An attacker can pass crafted paths which cause Lodash to delete me...
🚨 CVE-2026-24049
wheel is a command line tool for manipulating Python wheel files, as defined in PEP 427. In versions 0.40.0 through 0.46.1, the unpack function is vulnerable to file permission modification through mishandling of file permissions after extraction. The logic blindly trusts the filename from the archive header for the chmod operation, even though the extraction process itself might have sanitized the path. Attackers can craft a malicious wheel file that, when unpacked, changes the permissions of critical system files (e.g., /etc/passwd, SSH keys, config files), allowing for Privilege Escalation or arbitrary code execution by modifying now-writable scripts. This issue has been fixed in version 0.46.2.
🎖@cveNotify
wheel is a command line tool for manipulating Python wheel files, as defined in PEP 427. In versions 0.40.0 through 0.46.1, the unpack function is vulnerable to file permission modification through mishandling of file permissions after extraction. The logic blindly trusts the filename from the archive header for the chmod operation, even though the extraction process itself might have sanitized the path. Attackers can craft a malicious wheel file that, when unpacked, changes the permissions of critical system files (e.g., /etc/passwd, SSH keys, config files), allowing for Privilege Escalation or arbitrary code execution by modifying now-writable scripts. This issue has been fixed in version 0.46.2.
🎖@cveNotify
GitHub
Fixed security issue around wheel unpack (#675) · pypa/wheel@7a7d2de
A maliciously crafted wheel could cause the permissions of a file outside the unpack tree to be altered.
Fixes CVE-2026-24049.
Fixes CVE-2026-24049.
🚨 CVE-2026-21721
The dashboard permissions API does not verify the target dashboard scope and only checks the dashboards.permissions:* action. As a result, a user who has permission management rights on one dashboard can read and modify permissions on other dashboards. This is an organization‑internal privilege escalation.
🎖@cveNotify
The dashboard permissions API does not verify the target dashboard scope and only checks the dashboards.permissions:* action. As a result, a user who has permission management rights on one dashboard can read and modify permissions on other dashboards. This is an organization‑internal privilege escalation.
🎖@cveNotify
Grafana Labs
Cross-dashboard privilege escalation via permission management | Grafana Labs
Grafana is an open-source platform for monitoring and observability. The platform supports creating dashboards, which collate various visualisation panels onto one plane. These can have per-user permissions.