🚨 CVE-2026-52923
In the Linux kernel, the following vulnerability has been resolved:
ipc: limit next_id allocation to the valid ID range
The checkpoint/restore sysctl path can request the next SysV IPC id
through ids->next_id. ipc_idr_alloc() currently forwards that request to
idr_alloc() with an open-ended upper bound.
If the valid tail of the SysV IPC id space is full, the allocation can
spill beyond ipc_mni. The returned SysV IPC id still uses the normal
index encoding, so later lookup and removal can target the wrong slot.
This leaves the real IDR entry behind and breaks the IDR state for the
object.
The bug is in ipc_idr_alloc() in the checkpoint/restore path.
1. ids->next_id is passed to:
idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...)
2. The zero upper bound makes the allocation effectively open-ended.
Once the valid SysV IPC tail is occupied, idr_alloc() can spill past
ipc_mni and allocate an entry beyond the valid IPC id range.
3. The new object id is still encoded with the narrower SysV IPC index
width:
new->id = (new->seq << ipcmni_seq_shift()) + idx
4. Later removal goes through ipc_rmid(), which uses:
ipcid_to_idx(ipcp->id)
That truncates the real IDR index. An object actually stored at a
high index can then be removed as if it lived at a low in-range
index.
5. For shared memory, shm_destroy() frees the current object anyway, but
the real high IDR slot is left behind as a dangling pointer.
6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry
and dereferences freed memory.
Prevent this by bounding the requested allocation to ipc_mni so the
checkpoint/restore path fails once the valid range is exhausted.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ipc: limit next_id allocation to the valid ID range
The checkpoint/restore sysctl path can request the next SysV IPC id
through ids->next_id. ipc_idr_alloc() currently forwards that request to
idr_alloc() with an open-ended upper bound.
If the valid tail of the SysV IPC id space is full, the allocation can
spill beyond ipc_mni. The returned SysV IPC id still uses the normal
index encoding, so later lookup and removal can target the wrong slot.
This leaves the real IDR entry behind and breaks the IDR state for the
object.
The bug is in ipc_idr_alloc() in the checkpoint/restore path.
1. ids->next_id is passed to:
idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...)
2. The zero upper bound makes the allocation effectively open-ended.
Once the valid SysV IPC tail is occupied, idr_alloc() can spill past
ipc_mni and allocate an entry beyond the valid IPC id range.
3. The new object id is still encoded with the narrower SysV IPC index
width:
new->id = (new->seq << ipcmni_seq_shift()) + idx
4. Later removal goes through ipc_rmid(), which uses:
ipcid_to_idx(ipcp->id)
That truncates the real IDR index. An object actually stored at a
high index can then be removed as if it lived at a low in-range
index.
5. For shared memory, shm_destroy() frees the current object anyway, but
the real high IDR slot is left behind as a dangling pointer.
6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry
and dereferences freed memory.
Prevent this by bounding the requested allocation to ipc_mni so the
checkpoint/restore path fails once the valid range is exhausted.
🎖@cveNotify
🚨 CVE-2026-52924
In the Linux kernel, the following vulnerability has been resolved:
sctp: purge outqueue on stale COOKIE-ECHO handling
sctp_stream_update() is only invoked when the association is moved into
COOKIE_WAIT during association setup/reconfiguration. In this path, the
outbound stream scheduler state (stream->out_curr) is expected to be
clean, since no user data should have been transmitted yet unless the
state machine has already partially progressed.
However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a
Stale Cookie ERROR is received, the association is rolled back from
COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already
have been queued and even bundled with the COOKIE-ECHO chunk.
During the rollback, sctp_stream_update() frees the old stream table
and installs a new one, but it does not invalidate stream->out_curr.
As a result, out_curr may still point to a freed sctp_stream_out
entry from the previous stream state.
Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on
stream->out_curr->ext, which can lead to use-after-free once the old
stream state has been released via sctp_stream_free().
This results in crashes such as (reported by Yuqi):
BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140
Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312
CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted
7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full)
sctp_sched_fcfs_dequeue+0x13a/0x140
sctp_outq_flush+0x1603/0x33e0
sctp_do_sm+0x31c9/0x5d30
sctp_assoc_bh_rcv+0x392/0x6f0
sctp_inq_push+0x1db/0x270
sctp_rcv+0x138d/0x3c10
Fix this by fully purging the association outqueue when handling the
Stale Cookie case. This ensures all pending transmit and retransmit
state is dropped, and any scheduler cached pointers are invalidated,
making it safe to rebuild stream state during COOKIE_WAIT restart.
Updating only stream->out_curr would be insufficient, since queued
and retransmittable data would still reference the old stream state and
trigger later use-after-free in dequeue paths.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
sctp: purge outqueue on stale COOKIE-ECHO handling
sctp_stream_update() is only invoked when the association is moved into
COOKIE_WAIT during association setup/reconfiguration. In this path, the
outbound stream scheduler state (stream->out_curr) is expected to be
clean, since no user data should have been transmitted yet unless the
state machine has already partially progressed.
However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a
Stale Cookie ERROR is received, the association is rolled back from
COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already
have been queued and even bundled with the COOKIE-ECHO chunk.
During the rollback, sctp_stream_update() frees the old stream table
and installs a new one, but it does not invalidate stream->out_curr.
As a result, out_curr may still point to a freed sctp_stream_out
entry from the previous stream state.
Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on
stream->out_curr->ext, which can lead to use-after-free once the old
stream state has been released via sctp_stream_free().
This results in crashes such as (reported by Yuqi):
BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140
Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312
CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted
7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full)
sctp_sched_fcfs_dequeue+0x13a/0x140
sctp_outq_flush+0x1603/0x33e0
sctp_do_sm+0x31c9/0x5d30
sctp_assoc_bh_rcv+0x392/0x6f0
sctp_inq_push+0x1db/0x270
sctp_rcv+0x138d/0x3c10
Fix this by fully purging the association outqueue when handling the
Stale Cookie case. This ensures all pending transmit and retransmit
state is dropped, and any scheduler cached pointers are invalidated,
making it safe to rebuild stream state during COOKIE_WAIT restart.
Updating only stream->out_curr would be insufficient, since queued
and retransmittable data would still reference the old stream state and
trigger later use-after-free in dequeue paths.
🎖@cveNotify
🚨 CVE-2026-13676
fast-uri versions 2.3.1 through 3.1.2 and 4.0.0 fail to canonicalize Unicode (IDN) hostnames for HTTP-family URLs. The IDN conversion path calls a helper that does not exist on the global URL constructor, silently leaving the host in its original Unicode form while normalize() and equal() still return values that differ from a WHATWG-compatible URL parser. Applications that use fast-uri to enforce host-based policy (denylists, loopback filtering, redirect validation, outbound proxy routing) before passing the same URL to Node's URL or fetch can be bypassed when the two implementations resolve the same input to different hosts. Patches: upgrade to fast-uri 3.1.3 for the 3.x line or 4.0.1 for the 4.x line. Workarounds: enforce host policy using the same URL parser used for the actual request, or reject non-ASCII hosts before policy checks.
🎖@cveNotify
fast-uri versions 2.3.1 through 3.1.2 and 4.0.0 fail to canonicalize Unicode (IDN) hostnames for HTTP-family URLs. The IDN conversion path calls a helper that does not exist on the global URL constructor, silently leaving the host in its original Unicode form while normalize() and equal() still return values that differ from a WHATWG-compatible URL parser. Applications that use fast-uri to enforce host-based policy (denylists, loopback filtering, redirect validation, outbound proxy routing) before passing the same URL to Node's URL or fetch can be bypassed when the two implementations resolve the same input to different hosts. Patches: upgrade to fast-uri 3.1.3 for the 3.x line or 4.0.1 for the 4.x line. Workarounds: enforce host policy using the same URL parser used for the actual request, or reject non-ASCII hosts before policy checks.
🎖@cveNotify
OpenJS Foundation CVE Numbering Authority
Security Advisories
The OpenJS Foundation’s CVE Numbering Authority (CNA)
🚨 CVE-2026-55955
Improper Authentication vulnerability in Apache Tomcat allowed a replay attack against the EncryptionInterceptor in the cluster component.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M1 through 10.1.55, from 9.0.13 through 9.0.18, from 8.5.38 through 8.5.100, from 7.0.100 through 7.0.109.
Users are recommended to upgrade to version 11.0.23, 10.1.56, 9.0.119, which fixes the issue.
🎖@cveNotify
Improper Authentication vulnerability in Apache Tomcat allowed a replay attack against the EncryptionInterceptor in the cluster component.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M1 through 10.1.55, from 9.0.13 through 9.0.18, from 8.5.38 through 8.5.100, from 7.0.100 through 7.0.109.
Users are recommended to upgrade to version 11.0.23, 10.1.56, 9.0.119, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-53330
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix out-of-bounds read in dp_get_eq_aux_rd_interval()
[Why & How]
The aux_rd_interval array in struct dc_lttpr_caps is declared with
MAX_REPEATER_CNT - 1 (7) elements, indexed 0..6. However, the offset
parameter passed to dp_get_eq_aux_rd_interval() can be as large as
MAX_REPEATER_CNT (8) when a sink reports 8 LTTPR repeaters via DPCD.
This leads to an out-of-bounds read of aux_rd_interval[7] when offset
is 8.
Fix this by growing aux_rd_interval to MAX_REPEATER_CNT elements to
accommodate the full range of valid repeater counts defined by the DP
spec.
(cherry picked from commit a55a458a8df37a65ffda5cf721d554a8f74f6b04)
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix out-of-bounds read in dp_get_eq_aux_rd_interval()
[Why & How]
The aux_rd_interval array in struct dc_lttpr_caps is declared with
MAX_REPEATER_CNT - 1 (7) elements, indexed 0..6. However, the offset
parameter passed to dp_get_eq_aux_rd_interval() can be as large as
MAX_REPEATER_CNT (8) when a sink reports 8 LTTPR repeaters via DPCD.
This leads to an out-of-bounds read of aux_rd_interval[7] when offset
is 8.
Fix this by growing aux_rd_interval to MAX_REPEATER_CNT elements to
accommodate the full range of valid repeater counts defined by the DP
spec.
(cherry picked from commit a55a458a8df37a65ffda5cf721d554a8f74f6b04)
🎖@cveNotify
🚨 CVE-2026-53345
In the Linux kernel, the following vulnerability has been resolved:
KVM: Don't WARN if memory is dirtied without a vCPU when the VM is dying
When marking a page dirty, complain about not having a running/loaded vCPU
if and only if the VM is still alive, i.e. its refcount is non-zero. This
will allow fixing a memory leak for x86 SEV-ES guests without hitting what
is effectively a false positive on the WARN.
For some SEV-ES VM-Exits, KVM keeps a writable mapping of a guest page
across an exit to userspace, and typically unmaps the page on the next
KVM_RUN. But if userspace never calls KVM_RUN after such an exit, then KVM
needs to unmap the page when the vCPU is destroyed, which in turn triggers
the WARN about not having a running vCPU.
Alternatively, SEV-ES could temporarily load the vCPU to suppress the WARN,
as is done in nested_vmx_free_vcpu() (but for completely unrelated reasons;
suppressing WARN from nested_put_vmcs12_pages() is pure happenstance). But
loading a vCPU during destruction is gross (ideally nVMX code would be
cleaned up), risks complicating the SEV-ES code (KVM would need to ensure
the temporarily load()+put() only runs when the vCPU isn't already loaded),
and is ultimately pointless.
The motivation for the WARN is to guard against KVM dirtying guest memory
without pushing the corresponding GFN to the active vCPU's dirty ring, e.g.
to ensure userspace doesn't miss a dirty page. But for the VM's refcount
to reach zero, there can't be _any_ userspace mappings to the dirty ring,
as mapping the dirty ring requires doing mmap() on the vCPU FD. I.e. if
userspace had a valid mapping for the dirty ring, then the vCPU file and
thus the owning VM would still be alive. And so since userspace can't
possibly reach the dirty ring, whether or not KVM technically "misses" a
push to the dirty ring is irrelevant.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
KVM: Don't WARN if memory is dirtied without a vCPU when the VM is dying
When marking a page dirty, complain about not having a running/loaded vCPU
if and only if the VM is still alive, i.e. its refcount is non-zero. This
will allow fixing a memory leak for x86 SEV-ES guests without hitting what
is effectively a false positive on the WARN.
For some SEV-ES VM-Exits, KVM keeps a writable mapping of a guest page
across an exit to userspace, and typically unmaps the page on the next
KVM_RUN. But if userspace never calls KVM_RUN after such an exit, then KVM
needs to unmap the page when the vCPU is destroyed, which in turn triggers
the WARN about not having a running vCPU.
Alternatively, SEV-ES could temporarily load the vCPU to suppress the WARN,
as is done in nested_vmx_free_vcpu() (but for completely unrelated reasons;
suppressing WARN from nested_put_vmcs12_pages() is pure happenstance). But
loading a vCPU during destruction is gross (ideally nVMX code would be
cleaned up), risks complicating the SEV-ES code (KVM would need to ensure
the temporarily load()+put() only runs when the vCPU isn't already loaded),
and is ultimately pointless.
The motivation for the WARN is to guard against KVM dirtying guest memory
without pushing the corresponding GFN to the active vCPU's dirty ring, e.g.
to ensure userspace doesn't miss a dirty page. But for the VM's refcount
to reach zero, there can't be _any_ userspace mappings to the dirty ring,
as mapping the dirty ring requires doing mmap() on the vCPU FD. I.e. if
userspace had a valid mapping for the dirty ring, then the vCPU file and
thus the owning VM would still be alive. And so since userspace can't
possibly reach the dirty ring, whether or not KVM technically "misses" a
push to the dirty ring is irrelevant.
🎖@cveNotify
🚨 CVE-2026-53354
In the Linux kernel, the following vulnerability has been resolved:
arm64: errata: Mitigate TLBI errata on various Arm CPUs
A number of CPUs developed by Arm suffer from errata whereby a broadcast
TLBI;DSB sequence may complete before the global observation of writes
which are translated by an affected TLB entry.
These errata ONLY affect the completion of memory accesses which have
been translated by an invalidated TLB entry, and these errata DO NOT
affect the actual invalidation of TLB entries. TLB entries are removed
correctly.
This issue has been assigned CVE ID CVE-2025-10263.
To mitigate this issue, Arm recommends that software follows any
affected TLBI;DSB sequence with an additional TLBI;DSB, which will
ensure that all memory write effects affected by the first TLBI have
been globally observed. The additional TLBI can use any operation that
is broadcast to affected CPUs, and the additional DSB can use any option
that is sufficient to complete the additional TLBI.
The ARM64_WORKAROUND_REPEAT_TLBI workaround is sufficient to mitigate
the issue. Enable this workaround for affected CPUs, and update the
silicon errata documentation accordingly.
Note that due to the manner in which Arm develops IP and tracks errata,
some CPUs share a common erratum number.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
arm64: errata: Mitigate TLBI errata on various Arm CPUs
A number of CPUs developed by Arm suffer from errata whereby a broadcast
TLBI;DSB sequence may complete before the global observation of writes
which are translated by an affected TLB entry.
These errata ONLY affect the completion of memory accesses which have
been translated by an invalidated TLB entry, and these errata DO NOT
affect the actual invalidation of TLB entries. TLB entries are removed
correctly.
This issue has been assigned CVE ID CVE-2025-10263.
To mitigate this issue, Arm recommends that software follows any
affected TLBI;DSB sequence with an additional TLBI;DSB, which will
ensure that all memory write effects affected by the first TLBI have
been globally observed. The additional TLBI can use any operation that
is broadcast to affected CPUs, and the additional DSB can use any option
that is sufficient to complete the additional TLBI.
The ARM64_WORKAROUND_REPEAT_TLBI workaround is sufficient to mitigate
the issue. Enable this workaround for affected CPUs, and update the
silicon errata documentation accordingly.
Note that due to the manner in which Arm develops IP and tracks errata,
some CPUs share a common erratum number.
🎖@cveNotify
🚨 CVE-2026-21051
Incorrect default permissions in WLAN security prior to SMR Jul-2026 Release 1 allows local attackers to configure TencentWifiSecurity settings.
🎖@cveNotify
Incorrect default permissions in WLAN security prior to SMR Jul-2026 Release 1 allows local attackers to configure TencentWifiSecurity settings.
🎖@cveNotify
🚨 CVE-2026-21052
Path traversal in SemClipboardService prior to SMR Jul-2026 Release 1 allows local privileged attackers to access files with system privilege.
🎖@cveNotify
Path traversal in SemClipboardService prior to SMR Jul-2026 Release 1 allows local privileged attackers to access files with system privilege.
🎖@cveNotify
🚨 CVE-2026-21053
Improper input validation in Samsung Email prior to version 6.2.13.1 allows local attackers to create arbitrary files within the application sandbox.
🎖@cveNotify
Improper input validation in Samsung Email prior to version 6.2.13.1 allows local attackers to create arbitrary files within the application sandbox.
🎖@cveNotify
🚨 CVE-2026-21054
Improper export of android application components in InputSharing prior to version 2.7.01.4 allows local attackers to access sharing data.
🎖@cveNotify
Improper export of android application components in InputSharing prior to version 2.7.01.4 allows local attackers to access sharing data.
🎖@cveNotify
🚨 CVE-2026-21055
Improper export of android application components in Bixby prior to version 4.0.70.8 allows local attackers to execute arbitrary commands with Bixby privilege.
🎖@cveNotify
Improper export of android application components in Bixby prior to version 4.0.70.8 allows local attackers to execute arbitrary commands with Bixby privilege.
🎖@cveNotify
🚨 CVE-2026-21057
Improper input validation in Samsung Pass prior to version 5.2.10.3 allows local privileged attackers to write out-of-bounds memory.
🎖@cveNotify
Improper input validation in Samsung Pass prior to version 5.2.10.3 allows local privileged attackers to write out-of-bounds memory.
🎖@cveNotify
🚨 CVE-2026-12276
The LA-Studio Element Kit for Elementor WordPress plugin before 1.6.1 does not check whether user registration is enabled on the site before creating an account through one of its unauthenticated AJAX actions, allowing unauthenticated attackers to register new accounts even when registration has been disabled site-wide.
🎖@cveNotify
The LA-Studio Element Kit for Elementor WordPress plugin before 1.6.1 does not check whether user registration is enabled on the site before creating an account through one of its unauthenticated AJAX actions, allowing unauthenticated attackers to register new accounts even when registration has been disabled site-wide.
🎖@cveNotify
WPScan
LA-Studio Element Kit for Elementor < 1.6.1 - Unauthenticated Open Registration
See details on LA-Studio Element Kit for Elementor < 1.6.1 - Unauthenticated Open Registration CVE 2026-12276. View the latest Plugin Vulnerabilities on WPScan.
🚨 CVE-2026-14475
The Cookie Banner for GDPR / CCPA – WPLP Cookie Consent plugin for WordPress is vulnerable to generic SQL Injection via the 'scan_id' parameter in all versions up to, and including, 4.3.6 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.
🎖@cveNotify
The Cookie Banner for GDPR / CCPA – WPLP Cookie Consent plugin for WordPress is vulnerable to generic SQL Injection via the 'scan_id' parameter in all versions up to, and including, 4.3.6 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.
🎖@cveNotify
🚨 CVE-2026-15028
A flaw was found in libarchive. This vulnerability allows a remote attacker to trigger a heap overflow by providing a specially crafted tar archive. The issue occurs during the parsing of a PAX extended header containing a malformed SUN.holesdata sparse-file attribute. Successful exploitation could lead to a denial of service, making the system unavailable, or potentially allow for arbitrary code execution, giving the attacker control over the affected system.
🎖@cveNotify
A flaw was found in libarchive. This vulnerability allows a remote attacker to trigger a heap overflow by providing a specially crafted tar archive. The issue occurs during the parsing of a PAX extended header containing a malformed SUN.holesdata sparse-file attribute. Successful exploitation could lead to a denial of service, making the system unavailable, or potentially allow for arbitrary code execution, giving the attacker control over the affected system.
🎖@cveNotify
🚨 CVE-2026-58225
SQL Injection vulnerability in elixir-ecto postgrex allows an attacker who can influence a LISTEN channel name to inject SQL into the reconnect replay query, causing a denial of service of the notification connection.
Postgrex.Notifications sanitizes channel names with quote_channel/1, which doubles double quotes so the name is safe inside a double-quoted identifier. This protects the single-statement LISTEN and UNLISTEN paths. On every (re)connect, however, handle_connect/1 replays all registered channels at once by concatenating their LISTEN statements and wrapping them in a dollar-quoted anonymous code block (DO $$BEGIN ... END$$). quote_channel/1 does not escape the $$ dollar-quote delimiter that opens and closes this block.
The listen/3 guards only reject null bytes and names longer than 63 bytes, so a channel name containing $$ passes validation unchanged. Once such a name is embedded, its $$ prematurely terminates the outer dollar-quoted string and PostgreSQL parses the remainder as additional top-level statements. Because handle_connect/1 runs on every (re)connect, the malformed replay query is rejected each time and the notification connection never re-establishes its subscriptions, silently dropping notifications for every channel sharing that connection.
An application is affected when it passes untrusted input (for example a tenant or user identifier) as a channel name to Postgrex.Notifications.listen/3. The double-quote doubling prevents forming a fully valid injected statement, so arbitrary SQL execution is not possible, but the corrupted query reliably breaks the shared notification connection for all tenants, resulting in denial of service.
This issue affects postgrex: from 0.16.0 before 0.22.3.
🎖@cveNotify
SQL Injection vulnerability in elixir-ecto postgrex allows an attacker who can influence a LISTEN channel name to inject SQL into the reconnect replay query, causing a denial of service of the notification connection.
Postgrex.Notifications sanitizes channel names with quote_channel/1, which doubles double quotes so the name is safe inside a double-quoted identifier. This protects the single-statement LISTEN and UNLISTEN paths. On every (re)connect, however, handle_connect/1 replays all registered channels at once by concatenating their LISTEN statements and wrapping them in a dollar-quoted anonymous code block (DO $$BEGIN ... END$$). quote_channel/1 does not escape the $$ dollar-quote delimiter that opens and closes this block.
The listen/3 guards only reject null bytes and names longer than 63 bytes, so a channel name containing $$ passes validation unchanged. Once such a name is embedded, its $$ prematurely terminates the outer dollar-quoted string and PostgreSQL parses the remainder as additional top-level statements. Because handle_connect/1 runs on every (re)connect, the malformed replay query is rejected each time and the notification connection never re-establishes its subscriptions, silently dropping notifications for every channel sharing that connection.
An application is affected when it passes untrusted input (for example a tenant or user identifier) as a channel name to Postgrex.Notifications.listen/3. The double-quote doubling prevents forming a fully valid injected statement, so arbitrary SQL execution is not possible, but the corrupted query reliably breaks the shared notification connection for all tenants, resulting in denial of service.
This issue affects postgrex: from 0.16.0 before 0.22.3.
🎖@cveNotify
Erlang Ecosystem Foundation CNA
SQL injection via unescaped dollar-quote in Postgrex.Notifications reconnect replay causes notification denial of service
This project handles the CVE Numbering Authority (CNA) for the Erlang Ecosystem Foundation (EEF).
🚨 CVE-2026-53363
In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags()
iptfs_consume_frags() transfers paged fragments from one socket buffer
to another but fails to propagate the SKBFL_SHARED_FRAG flag. This is
the same class of bug that was fixed in skb_try_coalesce() for
CVE-2026-46300: when fragments backed by read-only page-cache pages are
merged, the marker indicating their shared nature must be preserved so
that ESP can decide correctly whether in-place encryption is safe.
Apply the same two-line fix used in skb_try_coalesce() to
iptfs_consume_frags().
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags()
iptfs_consume_frags() transfers paged fragments from one socket buffer
to another but fails to propagate the SKBFL_SHARED_FRAG flag. This is
the same class of bug that was fixed in skb_try_coalesce() for
CVE-2026-46300: when fragments backed by read-only page-cache pages are
merged, the marker indicating their shared nature must be preserved so
that ESP can decide correctly whether in-place encryption is safe.
Apply the same two-line fix used in skb_try_coalesce() to
iptfs_consume_frags().
🎖@cveNotify
🚨 CVE-2026-56688
Dell PowerFlex Manager, Version prior to 5.1.0.1, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability during OS Repository processing to achieve arbitrary command execution as root, potentially leading to full appliance compromise and lateral movement into managed infrastructure.
🎖@cveNotify
Dell PowerFlex Manager, Version prior to 5.1.0.1, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability during OS Repository processing to achieve arbitrary command execution as root, potentially leading to full appliance compromise and lateral movement into managed infrastructure.
🎖@cveNotify
🚨 CVE-2026-56689
Dell PowerFlex Manager, Version prior to 5.1.0.1, contain(s) an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Information exposure.
🎖@cveNotify
Dell PowerFlex Manager, Version prior to 5.1.0.1, contain(s) an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Information exposure.
🎖@cveNotify
🚨 CVE-2026-56690
Dell PowerFlex Manager, Version prior to 5.1.0.1, contain(s) an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure, Information exposure, and Unauthorized access.
🎖@cveNotify
Dell PowerFlex Manager, Version prior to 5.1.0.1, contain(s) an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure, Information exposure, and Unauthorized access.
🎖@cveNotify