🚨 CVE-2026-57030
A Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
As part of the stateful traffic processing on SRX Series devices flows are being established, and removed when not needed anymore. During the removal process the timeout of a flow should be set to 3 seconds and consequentially the flow should be removed shortly after. Due to a race condition occurring when setting the timeout there is a chance (the exact conditions are outside the attackers control) that the timeout is instead set to a very high value of larger than 10,000 seconds:
user@host> show security flow session | match timeout
Session ID: 98784248524, Policy name: PROD-FLOW/4, HA State: Active, Timeout: 85250, Session State: Valid
This will lead to an accumulation of flows which can be observed by an ever-increasing value of invalidated sessions in the output of 'show security flow session summary':
user@host> show security flow session summary | match invalid
Invalidated sessions: 216931These sessions can't be cleared manually with the 'clear security flow session' command, which will either lead to forwarding to stop (and the system needs to be manually recovered with a reboot) or to a flowd core and automatic reboot.
This issue affects Junos OS on SRX Series:
* 24.2 versions before 24.2R2-S3,
* 24.4 versions before 24.4R2-S1, 24.4R2-S2,
* 25.2 versions before 25.2R1-S2, 25.2R2.
This issue does not affect releases earlier than 24.2R1;
🎖@cveNotify
A Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
As part of the stateful traffic processing on SRX Series devices flows are being established, and removed when not needed anymore. During the removal process the timeout of a flow should be set to 3 seconds and consequentially the flow should be removed shortly after. Due to a race condition occurring when setting the timeout there is a chance (the exact conditions are outside the attackers control) that the timeout is instead set to a very high value of larger than 10,000 seconds:
user@host> show security flow session | match timeout
Session ID: 98784248524, Policy name: PROD-FLOW/4, HA State: Active, Timeout: 85250, Session State: Valid
This will lead to an accumulation of flows which can be observed by an ever-increasing value of invalidated sessions in the output of 'show security flow session summary':
user@host> show security flow session summary | match invalid
Invalidated sessions: 216931These sessions can't be cleared manually with the 'clear security flow session' command, which will either lead to forwarding to stop (and the system needs to be manually recovered with a reboot) or to a flowd core and automatic reboot.
This issue affects Junos OS on SRX Series:
* 24.2 versions before 24.2R2-S3,
* 24.4 versions before 24.4R2-S1, 24.4R2-S2,
* 25.2 versions before 25.2R1-S2, 25.2R2.
This issue does not affect releases earlier than 24.2R1;
🎖@cveNotify
🚨 CVE-2026-57031
An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on MX Series allows adjacent subscribers to bypass configured firewall filters.
On MX Series devices with MPC10/11, LC4800/9600, and MX304 with subscribers configured on static interfaces, ingress firewall filters are not enforced, so that neither protocol level nor upstream bandwidth limitation are in effect.
This issue affects Junos OS on MX with MPC10/11, LC4800/9600/4802, and MX304:
* 23.2 versions from 23.2R2-S1 before 23.2R2-S7,
* 23.4 versions from 23.4R2 before 23.4R2-S7,
* 24.2 versions before 24.2R2-S3,
* 24.4 versions before 24.4R2-S2,
* 25.2 versions before 25.2R2.
🎖@cveNotify
An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on MX Series allows adjacent subscribers to bypass configured firewall filters.
On MX Series devices with MPC10/11, LC4800/9600, and MX304 with subscribers configured on static interfaces, ingress firewall filters are not enforced, so that neither protocol level nor upstream bandwidth limitation are in effect.
This issue affects Junos OS on MX with MPC10/11, LC4800/9600/4802, and MX304:
* 23.2 versions from 23.2R2-S1 before 23.2R2-S7,
* 23.4 versions from 23.4R2 before 23.4R2-S7,
* 24.2 versions before 24.2R2-S3,
* 24.4 versions before 24.4R2-S2,
* 25.2 versions before 25.2R2.
🎖@cveNotify
🚨 CVE-2026-57032
An Improper Handling of Undefined Parameters vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on EX Series devices allows an authenticated attacker with low privileges to cause a Denial-of-Service (DoS).
If an attempt is made to subscribe to an unsupported telemetry sensor path on EX2300, EX3400, EX4000, EX4100 and EX4400 via gRPC, this causes the FPC to crash. This leads to a complete service outage until the module has automatically restarted.
The following log message can be seen when this issue happens:
agentd[<PID>]: AGENTD_RESOURCE_NOT_FOUND: No resource name found for <sensor>
This issue affects Junos OS on
EX2300, EX3400, EX4000, EX4100 and EX4400
devices:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S8,
* 24.2 versions before 24.2R2-S5,
* 24.4 versions before 24.4R2.
🎖@cveNotify
An Improper Handling of Undefined Parameters vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on EX Series devices allows an authenticated attacker with low privileges to cause a Denial-of-Service (DoS).
If an attempt is made to subscribe to an unsupported telemetry sensor path on EX2300, EX3400, EX4000, EX4100 and EX4400 via gRPC, this causes the FPC to crash. This leads to a complete service outage until the module has automatically restarted.
The following log message can be seen when this issue happens:
agentd[<PID>]: AGENTD_RESOURCE_NOT_FOUND: No resource name found for <sensor>
This issue affects Junos OS on
EX2300, EX3400, EX4000, EX4100 and EX4400
devices:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S8,
* 24.2 versions before 24.2R2-S5,
* 24.4 versions before 24.4R2.
🎖@cveNotify
🚨 CVE-2026-57054
A Use of Incorrectly-Resolved Name or Reference vulnerability in the URL filtering plugin of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to bypass web filtering and access downstream resources that should be unreachable.
If an MX Series device is configured with web filtering, and an attacker sends a request with a specifically formatted URL, this request will get forwarded despite the system being configured to block it. In turn, an attacker can access downstream resources that are expected to be unreachable.
This issue affects Junos OS on MX Series:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S8,
* 24.2 versions before 24.2R2-S5,
* 24.4 versions before 24.4R2-S4,
* 25.2 versions before 25.2R2-S1,
* 25.4 versions before 25.4R1-S2, 25.4R2.
🎖@cveNotify
A Use of Incorrectly-Resolved Name or Reference vulnerability in the URL filtering plugin of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to bypass web filtering and access downstream resources that should be unreachable.
If an MX Series device is configured with web filtering, and an attacker sends a request with a specifically formatted URL, this request will get forwarded despite the system being configured to block it. In turn, an attacker can access downstream resources that are expected to be unreachable.
This issue affects Junos OS on MX Series:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S8,
* 24.2 versions before 24.2R2-S5,
* 24.4 versions before 24.4R2-S4,
* 25.2 versions before 25.2R2-S1,
* 25.4 versions before 25.4R1-S2, 25.4R2.
🎖@cveNotify
🚨 CVE-2026-58122
Hermes WebUI before 0.51.307 contains an authentication bypass vulnerability that allows unauthenticated remote attackers to circumvent local-origin IP restrictions on onboarding endpoints by supplying a spoofed X-Forwarded-For header with a loopback address. Attackers can exploit this bypass to perform server-side request forgery against internal services including cloud metadata endpoints, overwrite LLM provider configuration and API keys with attacker-controlled values, or initiate OAuth device-code flows to obtain persistent access tokens stored in auth.json.
🎖@cveNotify
Hermes WebUI before 0.51.307 contains an authentication bypass vulnerability that allows unauthenticated remote attackers to circumvent local-origin IP restrictions on onboarding endpoints by supplying a spoofed X-Forwarded-For header with a loopback address. Attackers can exploit this bypass to perform server-side request forgery against internal services including cloud metadata endpoints, overwrite LLM provider configuration and API keys with attacker-controlled values, or initiate OAuth device-code flows to obtain persistent access tokens stored in auth.json.
🎖@cveNotify
GitHub
Release v0.51.307 — Release JW (stage-a3 — onboarding spoof fix + upd… · nesquena/hermes-webui@70596e6
…ate-check CSRF, #3758 partial) (#3764)
* fix(security): ignore spoofable forwarded IPs in onboarding gate + make update-check CSRF-safe (#3758, partial)
Ships the two unambiguous slices of #3758...
* fix(security): ignore spoofable forwarded IPs in onboarding gate + make update-check CSRF-safe (#3758, partial)
Ships the two unambiguous slices of #3758...
🚨 CVE-2026-58123
Hermes WebUI before 0.51.788 contains an unauthenticated remote code execution vulnerability that allows remote attackers to execute arbitrary shell commands by accessing the embedded terminal API endpoints without credentials. Attackers can create a session, attach a PTY shell, and write arbitrary commands through the terminal input endpoint to achieve full command execution as the server process user via four sequential unauthenticated HTTP requests.
🎖@cveNotify
Hermes WebUI before 0.51.788 contains an unauthenticated remote code execution vulnerability that allows remote attackers to execute arbitrary shell commands by accessing the embedded terminal API endpoints without credentials. Attackers can create a session, attach a PTY shell, and write arbitrary commands through the terminal input endpoint to achieve full command execution as the server process user via four sequential unauthenticated HTTP requests.
🎖@cveNotify
GitHub
fix(security): gate embedded-terminal endpoints to local origins when… · nesquena/hermes-webui@d257e5f
… auth disabled
The embedded workspace terminal spawns a PTY shell that runs arbitrary
commands as the server-process user. check_auth() returns True
unconditionally when no password/passkey is co...
The embedded workspace terminal spawns a PTY shell that runs arbitrary
commands as the server-process user. check_auth() returns True
unconditionally when no password/passkey is co...
🚨 CVE-2026-58143
Cotonti Siena 0.9.26 and earlier contains a cross-site request forgery vulnerability that allows unauthenticated attackers to modify administrator configuration by tricking a logged-in administrator into submitting a forged POST request to the admin.php config update handler, which never invokes the application's CSRF validation function. Attackers can disable the PFS module's file extension whitelist by setting pfsfilecheck to 0, enabling any user with PFS access to upload and execute arbitrary PHP files on the server.
🎖@cveNotify
Cotonti Siena 0.9.26 and earlier contains a cross-site request forgery vulnerability that allows unauthenticated attackers to modify administrator configuration by tricking a logged-in administrator into submitting a forged POST request to the admin.php config update handler, which never invokes the application's CSRF validation function. Attackers can disable the PFS module's file extension whitelist by setting pfsfilecheck to 0, enabling any user with PFS access to upload and execute arbitrary PHP files on the server.
🎖@cveNotify
Gist
CVE-2026-58143 & CVE-2026-58144 — Cotonti CMS CSRF to RCE and Stored XSS PoC
CVE-2026-58143 & CVE-2026-58144 — Cotonti CMS CSRF to RCE and Stored XSS PoC - CVE-2026-58143_README.md
🚨 CVE-2026-58144
Cotonti Siena 0.9.26 and earlier contains a stored cross-site scripting vulnerability that allows authenticated users with PFS access to inject arbitrary script payloads by supplying malicious HTML in the ntitle parameter processed through the TXT filter in pfs.main.php. Attackers can create a folder with a crafted title containing script tags that are stored unescaped in the database and execute in the browser of any user who views the folder listing, including administrators.
🎖@cveNotify
Cotonti Siena 0.9.26 and earlier contains a stored cross-site scripting vulnerability that allows authenticated users with PFS access to inject arbitrary script payloads by supplying malicious HTML in the ntitle parameter processed through the TXT filter in pfs.main.php. Attackers can create a folder with a crafted title containing script tags that are stored unescaped in the database and execute in the browser of any user who views the folder listing, including administrators.
🎖@cveNotify
Gist
CVE-2026-58143 & CVE-2026-58144 — Cotonti CMS CSRF to RCE and Stored XSS PoC
CVE-2026-58143 & CVE-2026-58144 — Cotonti CMS CSRF to RCE and Stored XSS PoC - CVE-2026-58143_README.md
🚨 CVE-2026-33655
New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 0.12.0-alpha.1, the default SSRF protection configuration did not apply IP filtering to hostnames; with ApplyIPFilterForDomain disabled by default, URL validation checked domain allow/block rules but did not resolve a hostname and validate the resolved IP address, allowing authenticated users to configure Webhook, Bark, or Gotify notification URLs that point at an internal or metadata IP address. This issue is fixed in version 0.12.0-alpha.1.
🎖@cveNotify
New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 0.12.0-alpha.1, the default SSRF protection configuration did not apply IP filtering to hostnames; with ApplyIPFilterForDomain disabled by default, URL validation checked domain allow/block rules but did not resolve a hostname and validate the resolved IP address, allowing authenticated users to configure Webhook, Bark, or Gotify notification URLs that point at an internal or metadata IP address. This issue is fixed in version 0.12.0-alpha.1.
🎖@cveNotify
GitHub
fix: harden SSRF protection for unauthenticated and user-level endpoints · QuantumNous/new-api@20399d3
- Add ValidateURLWithFetchSetting check before fetching MJ image URLs
in RelayMidjourneyImage (unauthenticated endpoint)
- Add ValidateURLWithFetchSetting check before fetching video URLs
in Vi...
in RelayMidjourneyImage (unauthenticated endpoint)
- Add ValidateURLWithFetchSetting check before fetching video URLs
in Vi...
🚨 CVE-2026-44342
New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 0.12.0-alpha.1, the email and WeChat account binding endpoints GET /api/oauth/email/bind and GET /api/oauth/wechat/bind used GET requests for state-changing account operations, allowing an attacker to trigger a logged-in user's browser to bind an attacker-controlled email address or OAuth identity in deployments where session cookies could be sent on cross-site navigations. This issue is fixed in version 0.12.0-alpha.1.
🎖@cveNotify
New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 0.12.0-alpha.1, the email and WeChat account binding endpoints GET /api/oauth/email/bind and GET /api/oauth/wechat/bind used GET requests for state-changing account operations, allowing an attacker to trigger a logged-in user's browser to bind an attacker-controlled email address or OAuth identity in deployments where session cookies could be sent on cross-site navigations. This issue is fixed in version 0.12.0-alpha.1.
🎖@cveNotify
GitHub
refactor: use POST for account binding endpoints and normalize reset … · QuantumNous/new-api@e099117
…responses
- Switch /api/oauth/email/bind and /api/oauth/wechat/bind from GET to
POST with JSON body for better REST semantics
- Normalize password reset endpoint to return consistent responses
...
- Switch /api/oauth/email/bind and /api/oauth/wechat/bind from GET to
POST with JSON body for better REST semantics
- Normalize password reset endpoint to return consistent responses
...
🚨 CVE-2026-57501
Zen is a firefox-based browser. Prior to 1.21.5b, Zen's glance and split-view context-menu actions, Open link in glance and Split link in new tab, load a page-controlled link URL with the System principal instead of the originating page's principal, allowing a malicious web page to place a link to a file URL that can load with System privileges when opened through either context-menu item and bypass the content-to-file security check that blocks an ordinary click. This issue is fixed in version 1.21.5b.
🎖@cveNotify
Zen is a firefox-based browser. Prior to 1.21.5b, Zen's glance and split-view context-menu actions, Open link in glance and Split link in new tab, load a page-controlled link URL with the System principal instead of the originating page's principal, allowing a malicious web page to place a link to a file URL that can load with System privileges when opened through either context-menu item and bypass the content-to-file security check that blocks an ordinary click. This issue is fixed in version 1.21.5b.
🎖@cveNotify
GitHub
Merge commit from fork · zen-browser/desktop@44f7616
Welcome to a calmer internet. Contribute to zen-browser/desktop development by creating an account on GitHub.
🚨 CVE-2026-59831
GitHub CLI (gh) is GitHub’s official command line tool. From 2.10.0 through 2.95.0, connecting to a malicious Codespace with gh codespace jupyter can allow command execution because the command opens a JupyterLab URL supplied by a process inside the Codespace without validating that it is a loopback HTTP or HTTPS address, allowing a crafted vscode:// or vscode-insiders:// URL to be handed to VS Code. This issue is fixed in version 2.96.0.
🎖@cveNotify
GitHub CLI (gh) is GitHub’s official command line tool. From 2.10.0 through 2.95.0, connecting to a malicious Codespace with gh codespace jupyter can allow command execution because the command opens a JupyterLab URL supplied by a process inside the Codespace without validating that it is a loopback HTTP or HTTPS address, allowing a crafted vscode:// or vscode-insiders:// URL to be handed to VS Code. This issue is fixed in version 2.96.0.
🎖@cveNotify
GitHub
Merge commit from fork · cli/cli@b300f2e
* Validate Jupyter Server URLs
* Validate Jupyter Server URLs: address reviews
* Validate Jupyter Server URLs: address test reviews
* Validate Jupyter Server URLs: address test reviews
* Validate Jupyter Server URLs: address reviews
* Validate Jupyter Server URLs: address test reviews
* Validate Jupyter Server URLs: address test reviews
🚨 CVE-2026-59832
SiYuan is an open-source personal knowledge management system. Prior to 3.7.1, the /snippets/*filepath route handler serveSnippets in kernel/server/serve.go joins a single-decoded request path with the snippets directory without subpath containment or sensitive-path checks, allowing an authenticated request such as /snippets/%2e%2e/%2e%2e/conf/conf.json to read workspace secrets and the document database. This issue is fixed in versions 3.7.1.
🎖@cveNotify
SiYuan is an open-source personal knowledge management system. Prior to 3.7.1, the /snippets/*filepath route handler serveSnippets in kernel/server/serve.go joins a single-decoded request path with the snippets directory without subpath containment or sensitive-path checks, allowing an authenticated request such as /snippets/%2e%2e/%2e%2e/conf/conf.json to read workspace secrets and the document database. This issue is fixed in versions 3.7.1.
🎖@cveNotify
GitHub
:lock: https://github.com/siyuan-note/siyuan/security/advisories/GHSA… · siyuan-note/siyuan@68cc0f5
…-275h-v5h9-vr82
Signed-off-by: Daniel <845765@qq.com>
Signed-off-by: Daniel <845765@qq.com>
🚨 CVE-2026-59833
SiYuan is an open-source personal knowledge management system. Prior to 3.7.1, SiYuan renders note and package content to HTML through the Lute engine with sanitization enabled, but Lute's dangerous javascript scheme block does not check form action or SVG xlink:href attributes, allowing stored cross-site scripting in document export-preview and Bazaar package README render paths that can execute OS commands in the Electron desktop renderer. This issue is fixed in versions 3.7.1.
🎖@cveNotify
SiYuan is an open-source personal knowledge management system. Prior to 3.7.1, SiYuan renders note and package content to HTML through the Lute engine with sanitization enabled, but Lute's dangerous javascript scheme block does not check form action or SVG xlink:href attributes, allowing stored cross-site scripting in document export-preview and Bazaar package README render paths that can execute OS commands in the Electron desktop renderer. This issue is fixed in versions 3.7.1.
🎖@cveNotify
GitHub
:lock: https://github.com/siyuan-note/siyuan/security/advisories/GHSA… · siyuan-note/siyuan@ebe252e
…-97xv-3v84-h358
Signed-off-by: Daniel <845765@qq.com>
Signed-off-by: Daniel <845765@qq.com>
🚨 CVE-2026-59834
SiYuan is an open-source personal knowledge management system. Prior to 3.7.1, the block search endpoint POST /api/search/fullTextSearchBlock concatenates attacker-controlled paths values into SQL predicates used by non-SQL search modes, allowing an unauthenticated publish visitor to inject a UNION SELECT and return rows from hidden documents by projecting an allowed visible box and path. This issue is fixed in versions 3.7.1.
🎖@cveNotify
SiYuan is an open-source personal knowledge management system. Prior to 3.7.1, the block search endpoint POST /api/search/fullTextSearchBlock concatenates attacker-controlled paths values into SQL predicates used by non-SQL search modes, allowing an unauthenticated publish visitor to inject a UNION SELECT and return rows from hidden documents by projecting an allowed visible box and path. This issue is fixed in versions 3.7.1.
🎖@cveNotify
GitHub
:lock: https://github.com/siyuan-note/siyuan/security/advisories/GHSA… · siyuan-note/siyuan@57bcad4
…-h89q-4j2h-7h88
Signed-off-by: Daniel <845765@qq.com>
Signed-off-by: Daniel <845765@qq.com>
🚨 CVE-2026-59853
SiYuan is an open-source personal knowledge management system. Prior to 3.7.1, the /api/storage/getCriteria endpoint returns saved search criteria from data/storage/criteria.json without the publish-access filtering used by sibling storage endpoints, allowing a publish-mode Reader to read private document paths, notebook, document, and block IDs, and search and replace keywords for unpublished documents. This issue is fixed in versions 3.7.1.
🎖@cveNotify
SiYuan is an open-source personal knowledge management system. Prior to 3.7.1, the /api/storage/getCriteria endpoint returns saved search criteria from data/storage/criteria.json without the publish-access filtering used by sibling storage endpoints, allowing a publish-mode Reader to read private document paths, notebook, document, and block IDs, and search and replace keywords for unpublished documents. This issue is fixed in versions 3.7.1.
🎖@cveNotify
GitHub
:lock: https://github.com/siyuan-note/siyuan/security/advisories/GHSA… · siyuan-note/siyuan@0049d0f
…-px3c-cf92-9g83
Signed-off-by: Daniel <845765@qq.com>
Signed-off-by: Daniel <845765@qq.com>
🚨 CVE-2026-59854
SiYuan is an open-source personal knowledge management system. Prior to 3.7.1, POST /api/file/globalCopyFiles accepts attacker-supplied absolute source paths and relies on util.IsSensitivePath in kernel/util/path.go, whose denylist misses common home-directory credential files such as .git-credentials, .netrc, .pgpass, .kube/config, .docker/config.json, and .gnupg, allowing an authenticated administrator or API-token user to copy those files into the workspace and exfiltrate them through the file API. This issue is fixed in versions 3.7.1-alpha.2 and 3.7.1.
🎖@cveNotify
SiYuan is an open-source personal knowledge management system. Prior to 3.7.1, POST /api/file/globalCopyFiles accepts attacker-supplied absolute source paths and relies on util.IsSensitivePath in kernel/util/path.go, whose denylist misses common home-directory credential files such as .git-credentials, .netrc, .pgpass, .kube/config, .docker/config.json, and .gnupg, allowing an authenticated administrator or API-token user to copy those files into the workspace and exfiltrate them through the file API. This issue is fixed in versions 3.7.1-alpha.2 and 3.7.1.
🎖@cveNotify
GitHub
:lock: https://github.com/siyuan-note/siyuan/security/advisories/GHSA… · siyuan-note/siyuan@914c518
…-vmm8-3ccv-ppvw
Signed-off-by: Daniel <845765@qq.com>
Signed-off-by: Daniel <845765@qq.com>
🚨 CVE-2026-59855
SiYuan is an open-source personal knowledge management system. Prior to 3.7.1, Asset.render in app/src/asset/index.ts interpolates the unsanitized this.path value into HTML assigned to innerHTML, allowing a crafted asset link containing a double quote to break out of the src attribute, inject an event handler, and execute JavaScript that can run OS commands in the Electron renderer. This issue is fixed in versions 3.7.1-alpha.2 and 3.7.1.
🎖@cveNotify
SiYuan is an open-source personal knowledge management system. Prior to 3.7.1, Asset.render in app/src/asset/index.ts interpolates the unsanitized this.path value into HTML assigned to innerHTML, allowing a crafted asset link containing a double quote to break out of the src attribute, inject an event handler, and execute JavaScript that can run OS commands in the Electron renderer. This issue is fixed in versions 3.7.1-alpha.2 and 3.7.1.
🎖@cveNotify
GitHub
:lock: https://github.com/siyuan-note/siyuan/security/advisories/GHSA… · siyuan-note/siyuan@efbe3a5
…-w3gq-5j72-36vc
Signed-off-by: Daniel <845765@qq.com>
Signed-off-by: Daniel <845765@qq.com>
🚨 CVE-2026-59856
Vim is an open source, command line text editor. Prior to 9.2.0736, the PHP omni-completion script in runtime/autoload/phpcomplete.vim interpolates a class or trait name, taken from the contents of the edited buffer, into a search() pattern that is run via win_execute() without escaping. A name containing a single quote can terminate the search() string argument early, and because the bar is honored as an Ex command separator, the remainder of the name is run as Ex commands; via the :! command this allows arbitrary operating-system command execution when a victim opens a crafted PHP file and invokes omni-completion. This issue is fixed in version 9.2.0736.
🎖@cveNotify
Vim is an open source, command line text editor. Prior to 9.2.0736, the PHP omni-completion script in runtime/autoload/phpcomplete.vim interpolates a class or trait name, taken from the contents of the edited buffer, into a search() pattern that is run via win_execute() without escaping. A name containing a single quote can terminate the search() string argument early, and because the bar is honored as an Ex command separator, the remainder of the name is run as Ex commands; via the :! command this allows arbitrary operating-system command execution when a victim opens a crafted PHP file and invokes omni-completion. This issue is fixed in version 9.2.0736.
🎖@cveNotify
GitHub
patch 9.2.0736: potential command execution in PHP omni-completion · vim/vim@43afc58
Problem: With PHP omni-completion, a crafted file can potentially
execute arbitrary commands when completing a class member.
Solution: Quote the class name before inserting it into the s...
execute arbitrary commands when completing a class member.
Solution: Quote the class name before inserting it into the s...
🚨 CVE-2026-59857
Vim is an open source, command line text editor. Prior to 9.2.0725, the single-byte branch of spell_soundfold_sal() in src/spell.c translates a word through a spell file's SAL sound-folding rules into a caller-owned result buffer, but its result writes are guarded with reslen < MAXWLEN, allowing reslen to reach MAXWLEN before res[reslen] = NUL writes one byte past the end of the MAXWLEN-element stack buffer. A boundary-length word passed to soundfold(), or reached via sound-based spell suggestion while a SAL-based spell language is active under a non-multibyte 8-bit encoding, can corrupt the eval_soundfold() stack frame and crash the editor. This issue is fixed in version 9.2.0725.
🎖@cveNotify
Vim is an open source, command line text editor. Prior to 9.2.0725, the single-byte branch of spell_soundfold_sal() in src/spell.c translates a word through a spell file's SAL sound-folding rules into a caller-owned result buffer, but its result writes are guarded with reslen < MAXWLEN, allowing reslen to reach MAXWLEN before res[reslen] = NUL writes one byte past the end of the MAXWLEN-element stack buffer. A boundary-length word passed to soundfold(), or reached via sound-based spell suggestion while a SAL-based spell language is active under a non-multibyte 8-bit encoding, can corrupt the eval_soundfold() stack frame and crash the editor. This issue is fixed in version 9.2.0725.
🎖@cveNotify
GitHub
patch 9.2.0725: [security]: Stack out-of-bounds write in spell_soundf… · vim/vim@d22ff1c
…old_sal()
Problem: [security]: A crafted spell file with non-collapsing SAL rules
can make soundfold() write one byte past the end of the
MAXWLEN result buffer. This is the ...
Problem: [security]: A crafted spell file with non-collapsing SAL rules
can make soundfold() write one byte past the end of the
MAXWLEN result buffer. This is the ...
🚨 CVE-2026-59858
Vim is an open source, command line text editor. Prior to 9.2.0735, the C omni-completion script in runtime/autoload/ccomplete.vim interpolates the typeref: or typename: extension field of a tags entry, without escaping, into a :vimgrep pattern that is run through :execute. Because :vimgrep honors the bar as a command separator, a crafted tag field can close the search pattern and append an arbitrary Ex command; opening a hostile .c file whose project tags file contains such an entry and invoking C omni-completion runs that command as the editing user. This issue is fixed in version 9.2.0735.
🎖@cveNotify
Vim is an open source, command line text editor. Prior to 9.2.0735, the C omni-completion script in runtime/autoload/ccomplete.vim interpolates the typeref: or typename: extension field of a tags entry, without escaping, into a :vimgrep pattern that is run through :execute. Because :vimgrep honors the bar as a command separator, a crafted tag field can close the search pattern and append an arbitrary Ex command; opening a hostile .c file whose project tags file contains such an entry and invoking C omni-completion runs that command as the editing user. This issue is fixed in version 9.2.0735.
🎖@cveNotify
GitHub
patch 9.2.0735: [security]: arbitrary Ex command execution during C o… · vim/vim@6b611b0
…mni-completion
Problem: [security]: With C omni-completion, a crafted tags file can execute
arbitrary Ex commands when completing a struct/union member
(cipher-creator)
Solut...
Problem: [security]: With C omni-completion, a crafted tags file can execute
arbitrary Ex commands when completing a struct/union member
(cipher-creator)
Solut...