๐จ CVE-2026-15187
A security flaw has been discovered in enquirer up to 2.4.1. Affected is the function Enquirer.set of the component Public Package API. The manipulation of the argument question.name results in improperly controlled modification of object prototype attributes. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report.
๐@cveNotify
A security flaw has been discovered in enquirer up to 2.4.1. Affected is the function Enquirer.set of the component Public Package API. The manipulation of the argument question.name results in improperly controlled modification of object prototype attributes. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report.
๐@cveNotify
๐จ CVE-2026-15188
A weakness has been identified in manjurulhoque django-job-portal up to dfa352f305bba44445ac5dc12e9b2a98c9dcd71f. Affected by this vulnerability is the function EditEmployeeProfileAPIView of the file accounts/api/views.py of the component Employee Dashboard Endpoint. This manipulation of the argument role causes improper access controls. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet.
๐@cveNotify
A weakness has been identified in manjurulhoque django-job-portal up to dfa352f305bba44445ac5dc12e9b2a98c9dcd71f. Affected by this vulnerability is the function EditEmployeeProfileAPIView of the file accounts/api/views.py of the component Employee Dashboard Endpoint. This manipulation of the argument role causes improper access controls. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet.
๐@cveNotify
๐จ CVE-2026-23556
When oxenstored is tearing a domain down, the node data is cleaned up
but the usage counts are leaked.
When the domain ID is eventually reused, the new domain can create fewer
nodes before beeing deemed to be over quota.
๐@cveNotify
When oxenstored is tearing a domain down, the node data is cleaned up
but the usage counts are leaked.
When the domain ID is eventually reused, the new domain can create fewer
nodes before beeing deemed to be over quota.
๐@cveNotify
๐จ CVE-2026-23559
[This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.]
XAPI can configure different users with different roles, using Role
Based Access Control. For more details, see:
https://docs.xenserver.com/en-us/xencenter/current-release/rbac-overview.html#rbac-roles
The pool-admin role is fully privileged. Notably, users with this role
can also SSH into the host as root.
The other administrator roles are pool-operator, vm-power-admin and
vm-admin, each of which are authorised to configure and manage various
aspects of the system.
Some settings are inadequately restricted, and can be set by a lower
privilege of administrator than expected.
* CVE-2026-23559: A vm-admin can set VBD.other_config:backend-local and
turn arbitrary files in dom0 into VDIs (virtual disks) and give said
disks to a VM they control. This is an arbitrary read and/or modify
of files in dom0.
* CVE-2026-23560: A vm-admin can set VM.other-config:is_system_domain
and mark a VM as a system domain. System domains are ignored and
left running during certain other host/pool operations, and may be
hidden from view in tooling.
* CVE-2026-23561: A vm-admin can set VM.other_config:storage_driver_domain
and mark a VM as the storage domain for a particular host storage
connection (PBD). Shutting down the VM can cause the PBD to be
erroneously marked as unplugged when it is not.
* CVE-2026-23562: Configuration of PCI passthrough is normally
restricted to the pool-admin role. However one API was missing this
check, allowing a vm-admin access to unintended host hardware.
* CVE-2026-42486: A vm-admin can set the VM.platform:hvm_serial
parameter, which should be restricted to the pool-admin role, as it
can allow arbitrary dom0 file write.
๐@cveNotify
[This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.]
XAPI can configure different users with different roles, using Role
Based Access Control. For more details, see:
https://docs.xenserver.com/en-us/xencenter/current-release/rbac-overview.html#rbac-roles
The pool-admin role is fully privileged. Notably, users with this role
can also SSH into the host as root.
The other administrator roles are pool-operator, vm-power-admin and
vm-admin, each of which are authorised to configure and manage various
aspects of the system.
Some settings are inadequately restricted, and can be set by a lower
privilege of administrator than expected.
* CVE-2026-23559: A vm-admin can set VBD.other_config:backend-local and
turn arbitrary files in dom0 into VDIs (virtual disks) and give said
disks to a VM they control. This is an arbitrary read and/or modify
of files in dom0.
* CVE-2026-23560: A vm-admin can set VM.other-config:is_system_domain
and mark a VM as a system domain. System domains are ignored and
left running during certain other host/pool operations, and may be
hidden from view in tooling.
* CVE-2026-23561: A vm-admin can set VM.other_config:storage_driver_domain
and mark a VM as the storage domain for a particular host storage
connection (PBD). Shutting down the VM can cause the PBD to be
erroneously marked as unplugged when it is not.
* CVE-2026-23562: Configuration of PCI passthrough is normally
restricted to the pool-admin role. However one API was missing this
check, allowing a vm-admin access to unintended host hardware.
* CVE-2026-42486: A vm-admin can set the VM.platform:hvm_serial
parameter, which should be restricted to the pool-admin role, as it
can allow arbitrary dom0 file write.
๐@cveNotify
Xenserver
Role Based Access Control overview | XenCenterยฎ
The Role Based Access Control feature lets you assign predefined roles or sets of permissions to Active Directory users and groups. These permissions control the level of access XenServerยฎ administrators have to servers and pools.
๐จ CVE-2026-23561
[This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.]
XAPI can configure different users with different roles, using Role
Based Access Control. For more details, see:
https://docs.xenserver.com/en-us/xencenter/current-release/rbac-overview.html#rbac-roles
The pool-admin role is fully privileged. Notably, users with this role
can also SSH into the host as root.
The other administrator roles are pool-operator, vm-power-admin and
vm-admin, each of which are authorised to configure and manage various
aspects of the system.
Some settings are inadequately restricted, and can be set by a lower
privilege of administrator than expected.
* CVE-2026-23559: A vm-admin can set VBD.other_config:backend-local and
turn arbitrary files in dom0 into VDIs (virtual disks) and give said
disks to a VM they control. This is an arbitrary read and/or modify
of files in dom0.
* CVE-2026-23560: A vm-admin can set VM.other-config:is_system_domain
and mark a VM as a system domain. System domains are ignored and
left running during certain other host/pool operations, and may be
hidden from view in tooling.
* CVE-2026-23561: A vm-admin can set VM.other_config:storage_driver_domain
and mark a VM as the storage domain for a particular host storage
connection (PBD). Shutting down the VM can cause the PBD to be
erroneously marked as unplugged when it is not.
* CVE-2026-23562: Configuration of PCI passthrough is normally
restricted to the pool-admin role. However one API was missing this
check, allowing a vm-admin access to unintended host hardware.
* CVE-2026-42486: A vm-admin can set the VM.platform:hvm_serial
parameter, which should be restricted to the pool-admin role, as it
can allow arbitrary dom0 file write.
๐@cveNotify
[This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.]
XAPI can configure different users with different roles, using Role
Based Access Control. For more details, see:
https://docs.xenserver.com/en-us/xencenter/current-release/rbac-overview.html#rbac-roles
The pool-admin role is fully privileged. Notably, users with this role
can also SSH into the host as root.
The other administrator roles are pool-operator, vm-power-admin and
vm-admin, each of which are authorised to configure and manage various
aspects of the system.
Some settings are inadequately restricted, and can be set by a lower
privilege of administrator than expected.
* CVE-2026-23559: A vm-admin can set VBD.other_config:backend-local and
turn arbitrary files in dom0 into VDIs (virtual disks) and give said
disks to a VM they control. This is an arbitrary read and/or modify
of files in dom0.
* CVE-2026-23560: A vm-admin can set VM.other-config:is_system_domain
and mark a VM as a system domain. System domains are ignored and
left running during certain other host/pool operations, and may be
hidden from view in tooling.
* CVE-2026-23561: A vm-admin can set VM.other_config:storage_driver_domain
and mark a VM as the storage domain for a particular host storage
connection (PBD). Shutting down the VM can cause the PBD to be
erroneously marked as unplugged when it is not.
* CVE-2026-23562: Configuration of PCI passthrough is normally
restricted to the pool-admin role. However one API was missing this
check, allowing a vm-admin access to unintended host hardware.
* CVE-2026-42486: A vm-admin can set the VM.platform:hvm_serial
parameter, which should be restricted to the pool-admin role, as it
can allow arbitrary dom0 file write.
๐@cveNotify
Xenserver
Role Based Access Control overview | XenCenterยฎ
The Role Based Access Control feature lets you assign predefined roles or sets of permissions to Active Directory users and groups. These permissions control the level of access XenServerยฎ administrators have to servers and pools.
๐จ CVE-2026-23562
[This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.]
XAPI can configure different users with different roles, using Role
Based Access Control. For more details, see:
https://docs.xenserver.com/en-us/xencenter/current-release/rbac-overview.html#rbac-roles
The pool-admin role is fully privileged. Notably, users with this role
can also SSH into the host as root.
The other administrator roles are pool-operator, vm-power-admin and
vm-admin, each of which are authorised to configure and manage various
aspects of the system.
Some settings are inadequately restricted, and can be set by a lower
privilege of administrator than expected.
* CVE-2026-23559: A vm-admin can set VBD.other_config:backend-local and
turn arbitrary files in dom0 into VDIs (virtual disks) and give said
disks to a VM they control. This is an arbitrary read and/or modify
of files in dom0.
* CVE-2026-23560: A vm-admin can set VM.other-config:is_system_domain
and mark a VM as a system domain. System domains are ignored and
left running during certain other host/pool operations, and may be
hidden from view in tooling.
* CVE-2026-23561: A vm-admin can set VM.other_config:storage_driver_domain
and mark a VM as the storage domain for a particular host storage
connection (PBD). Shutting down the VM can cause the PBD to be
erroneously marked as unplugged when it is not.
* CVE-2026-23562: Configuration of PCI passthrough is normally
restricted to the pool-admin role. However one API was missing this
check, allowing a vm-admin access to unintended host hardware.
* CVE-2026-42486: A vm-admin can set the VM.platform:hvm_serial
parameter, which should be restricted to the pool-admin role, as it
can allow arbitrary dom0 file write.
๐@cveNotify
[This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.]
XAPI can configure different users with different roles, using Role
Based Access Control. For more details, see:
https://docs.xenserver.com/en-us/xencenter/current-release/rbac-overview.html#rbac-roles
The pool-admin role is fully privileged. Notably, users with this role
can also SSH into the host as root.
The other administrator roles are pool-operator, vm-power-admin and
vm-admin, each of which are authorised to configure and manage various
aspects of the system.
Some settings are inadequately restricted, and can be set by a lower
privilege of administrator than expected.
* CVE-2026-23559: A vm-admin can set VBD.other_config:backend-local and
turn arbitrary files in dom0 into VDIs (virtual disks) and give said
disks to a VM they control. This is an arbitrary read and/or modify
of files in dom0.
* CVE-2026-23560: A vm-admin can set VM.other-config:is_system_domain
and mark a VM as a system domain. System domains are ignored and
left running during certain other host/pool operations, and may be
hidden from view in tooling.
* CVE-2026-23561: A vm-admin can set VM.other_config:storage_driver_domain
and mark a VM as the storage domain for a particular host storage
connection (PBD). Shutting down the VM can cause the PBD to be
erroneously marked as unplugged when it is not.
* CVE-2026-23562: Configuration of PCI passthrough is normally
restricted to the pool-admin role. However one API was missing this
check, allowing a vm-admin access to unintended host hardware.
* CVE-2026-42486: A vm-admin can set the VM.platform:hvm_serial
parameter, which should be restricted to the pool-admin role, as it
can allow arbitrary dom0 file write.
๐@cveNotify
Xenserver
Role Based Access Control overview | XenCenterยฎ
The Role Based Access Control feature lets you assign predefined roles or sets of permissions to Active Directory users and groups. These permissions control the level of access XenServerยฎ administrators have to servers and pools.
๐จ CVE-2026-42486
[This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.]
XAPI can configure different users with different roles, using Role
Based Access Control. For more details, see:
https://docs.xenserver.com/en-us/xencenter/current-release/rbac-overview.html#rbac-roles
The pool-admin role is fully privileged. Notably, users with this role
can also SSH into the host as root.
The other administrator roles are pool-operator, vm-power-admin and
vm-admin, each of which are authorised to configure and manage various
aspects of the system.
Some settings are inadequately restricted, and can be set by a lower
privilege of administrator than expected.
* CVE-2026-23559: A vm-admin can set VBD.other_config:backend-local and
turn arbitrary files in dom0 into VDIs (virtual disks) and give said
disks to a VM they control. This is an arbitrary read and/or modify
of files in dom0.
* CVE-2026-23560: A vm-admin can set VM.other-config:is_system_domain
and mark a VM as a system domain. System domains are ignored and
left running during certain other host/pool operations, and may be
hidden from view in tooling.
* CVE-2026-23561: A vm-admin can set VM.other_config:storage_driver_domain
and mark a VM as the storage domain for a particular host storage
connection (PBD). Shutting down the VM can cause the PBD to be
erroneously marked as unplugged when it is not.
* CVE-2026-23562: Configuration of PCI passthrough is normally
restricted to the pool-admin role. However one API was missing this
check, allowing a vm-admin access to unintended host hardware.
* CVE-2026-42486: A vm-admin can set the VM.platform:hvm_serial
parameter, which should be restricted to the pool-admin role, as it
can allow arbitrary dom0 file write.
๐@cveNotify
[This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.]
XAPI can configure different users with different roles, using Role
Based Access Control. For more details, see:
https://docs.xenserver.com/en-us/xencenter/current-release/rbac-overview.html#rbac-roles
The pool-admin role is fully privileged. Notably, users with this role
can also SSH into the host as root.
The other administrator roles are pool-operator, vm-power-admin and
vm-admin, each of which are authorised to configure and manage various
aspects of the system.
Some settings are inadequately restricted, and can be set by a lower
privilege of administrator than expected.
* CVE-2026-23559: A vm-admin can set VBD.other_config:backend-local and
turn arbitrary files in dom0 into VDIs (virtual disks) and give said
disks to a VM they control. This is an arbitrary read and/or modify
of files in dom0.
* CVE-2026-23560: A vm-admin can set VM.other-config:is_system_domain
and mark a VM as a system domain. System domains are ignored and
left running during certain other host/pool operations, and may be
hidden from view in tooling.
* CVE-2026-23561: A vm-admin can set VM.other_config:storage_driver_domain
and mark a VM as the storage domain for a particular host storage
connection (PBD). Shutting down the VM can cause the PBD to be
erroneously marked as unplugged when it is not.
* CVE-2026-23562: Configuration of PCI passthrough is normally
restricted to the pool-admin role. However one API was missing this
check, allowing a vm-admin access to unintended host hardware.
* CVE-2026-42486: A vm-admin can set the VM.platform:hvm_serial
parameter, which should be restricted to the pool-admin role, as it
can allow arbitrary dom0 file write.
๐@cveNotify
Xenserver
Role Based Access Control overview | XenCenterยฎ
The Role Based Access Control feature lets you assign predefined roles or sets of permissions to Active Directory users and groups. These permissions control the level of access XenServerยฎ administrators have to servers and pools.
๐จ CVE-2026-59207
n8n is an open source workflow automation platform. Prior to 2.27.4 and 2.28.1, the AI Agents feature did not enforce the Allowed HTTP Request Domains restriction configured on credentials when an MCP tool was pointed at an arbitrary URL, allowing a member-level user with use-only access to a shared credential to send its secret to an external server they control. This issue is fixed in versions 2.27.4 and 2.28.1.
๐@cveNotify
n8n is an open source workflow automation platform. Prior to 2.27.4 and 2.28.1, the AI Agents feature did not enforce the Allowed HTTP Request Domains restriction configured on credentials when an MCP tool was pointed at an arbitrary URL, allowing a member-level user with use-only access to a shared credential to send its secret to an external server they control. This issue is fixed in versions 2.27.4 and 2.28.1.
๐@cveNotify
GitHub
Release n8n@2.27.4 ยท n8n-io/n8n
2.27.4 (2026-06-24)
Bug Fixes
core: Let allowlisted Python packages import their own submodules via relative imports (#32832) (62e876c)
Features
core: Fix building incorrect chained nodes (#3285...
Bug Fixes
core: Let allowlisted Python packages import their own submodules via relative imports (#32832) (62e876c)
Features
core: Fix building incorrect chained nodes (#3285...
๐จ CVE-2026-61474
An improper authorization check in MISPโs attribute creation endpoint allowed an authenticated user with permission to add attributes to submit a sharing_group_id without triggering the corresponding sharing group authorization check, as long as the attribute distribution value was not explicitly set to 4 โ โsharing groupโ.
As a result, a user could reference or associate an attribute with a sharing group they were not authorized to use. This could lead to an access-control bypass affecting the integrity of attribute sharing metadata and potentially expose or misuse restricted sharing group relationships.
The patch changes the authorization logic so that the sharing group permission check is performed whenever a non-empty sharing_group_id is provided, regardless of the selected distribution value.
๐@cveNotify
An improper authorization check in MISPโs attribute creation endpoint allowed an authenticated user with permission to add attributes to submit a sharing_group_id without triggering the corresponding sharing group authorization check, as long as the attribute distribution value was not explicitly set to 4 โ โsharing groupโ.
As a result, a user could reference or associate an attribute with a sharing group they were not authorized to use. This could lead to an access-control bypass affecting the integrity of attribute sharing metadata and potentially expose or misuse restricted sharing group relationships.
The patch changes the authorization logic so that the sharing group permission check is performed whenever a non-empty sharing_group_id is provided, regardless of the selected distribution value.
๐@cveNotify
๐จ CVE-2026-13461
When coupled with the SSL bypass vulnerability, JavaScript can be injected into a WebView in the PayRange version 7.0.7 app. The injection of specific JavaScript function calls allows the attacker to escape the WebView sandbox and perform a number of dangerous actions on the user's device.
๐@cveNotify
When coupled with the SSL bypass vulnerability, JavaScript can be injected into a WebView in the PayRange version 7.0.7 app. The injection of specific JavaScript function calls allows the attacker to escape the WebView sandbox and perform a number of dangerous actions on the user's device.
๐@cveNotify
cwe.mitre.org
CWE -
CWE-94: Improper Control of Generation of Code ('Code Injection') (4.20)
CWE-94: Improper Control of Generation of Code ('Code Injection') (4.20)
Common Weakness Enumeration (CWE) is a list of software weaknesses.
๐จ CVE-2026-13462
PayRange Android app, version 7.0.7 and below, contains an SSL bypass vulnerability that allows invalid certificates to be accepted in application webviews. A remote and unauthenticated attacker can steal information that the user sends.
๐@cveNotify
PayRange Android app, version 7.0.7 and below, contains an SSL bypass vulnerability that allows invalid certificates to be accepted in application webviews. A remote and unauthenticated attacker can steal information that the user sends.
๐@cveNotify
cwe.mitre.org
CWE -
CWE-295: Improper Certificate Validation (4.20)
CWE-295: Improper Certificate Validation (4.20)
Common Weakness Enumeration (CWE) is a list of software weaknesses.
๐จ CVE-2026-15190
A vulnerability was detected in SourceCodester Simple and Nice Shopping Cart Script 1.0. This affects an unknown part of the file /login.php. Performing a manipulation of the argument Username results in sql injection. Remote exploitation of the attack is possible. The exploit is now public and may be used.
๐@cveNotify
A vulnerability was detected in SourceCodester Simple and Nice Shopping Cart Script 1.0. This affects an unknown part of the file /login.php. Performing a manipulation of the argument Username results in sql injection. Remote exploitation of the attack is possible. The exploit is now public and may be used.
๐@cveNotify
GitHub
sourcecodester Simple and Nice Shopping Cart Script V1.0 /login.php SQL injection ยท Issue #1 ยท zainaakinyi45-boop/cve
sourcecodester Simple and Nice Shopping Cart Script V1.0 /login.php SQL injection NAME OF AFFECTED PRODUCT(S) Online Polling System Code Vendor Homepage https://www.sourcecodester.com/php/12579/sim...
๐จ CVE-2026-15191
A flaw has been found in mettle sendportal up to 3.0.1. This vulnerability affects unknown code of the file vendor/mettle/sendportal-core/src/Http/Requests/CampaignStoreRequest.php of the component Campaign Creation Endpoint. Executing a manipulation can lead to authorization bypass. The attack can be executed remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet.
๐@cveNotify
A flaw has been found in mettle sendportal up to 3.0.1. This vulnerability affects unknown code of the file vendor/mettle/sendportal-core/src/Http/Requests/CampaignStoreRequest.php of the component Campaign Creation Endpoint. Executing a manipulation can lead to authorization bypass. The attack can be executed remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet.
๐@cveNotify
GitHub
GitHub - mettle/sendportal: Open-source self-hosted email marketing. Manage your own newsletters at a fraction of the cost.
Open-source self-hosted email marketing. Manage your own newsletters at a fraction of the cost. - mettle/sendportal
๐จ CVE-2026-15192
A vulnerability has been found in mettle sendportal up to 3.0.1. This issue affects the function sendgrid/postmark/postal/mailjet of the component APIv1 Webhooks. The manipulation leads to missing authentication. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.
๐@cveNotify
A vulnerability has been found in mettle sendportal up to 3.0.1. This issue affects the function sendgrid/postmark/postal/mailjet of the component APIv1 Webhooks. The manipulation leads to missing authentication. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.
๐@cveNotify
GitHub
GitHub - mettle/sendportal: Open-source self-hosted email marketing. Manage your own newsletters at a fraction of the cost.
Open-source self-hosted email marketing. Manage your own newsletters at a fraction of the cost. - mettle/sendportal
๐จ CVE-2026-15193
A vulnerability was determined in AidanPark openclaw-android up to 0.4.0. The affected element is an unknown function of the file android/app/src/main/java/com/openclaw/android/JsBridge.kt of the component Android WebView Bridge. This manipulation causes os command injection. The attack can only be executed locally. The exploit has been publicly disclosed and may be utilized. The pull request to fix this issue awaits acceptance.
๐@cveNotify
A vulnerability was determined in AidanPark openclaw-android up to 0.4.0. The affected element is an unknown function of the file android/app/src/main/java/com/openclaw/android/JsBridge.kt of the component Android WebView Bridge. This manipulation causes os command injection. The attack can only be executed locally. The exploit has been publicly disclosed and may be utilized. The pull request to fix this issue awaits acceptance.
๐@cveNotify
GitHub
GitHub - AidanPark/openclaw-android: Run OpenClaw on Android with a single command โ no proot, no Linux
Run OpenClaw on Android with a single command โ no proot, no Linux - AidanPark/openclaw-android
๐จ CVE-2026-15194
A security flaw has been discovered in Open5GS 2.7.7. This affects the function amf_context_final of the file src/amf/context.c of the component AMF. Performing a manipulation results in use after free. The attack is only possible with local access. The exploit has been released to the public and may be used for attacks.
๐@cveNotify
A security flaw has been discovered in Open5GS 2.7.7. This affects the function amf_context_final of the file src/amf/context.c of the component AMF. Performing a manipulation results in use after free. The attack is only possible with local access. The exploit has been released to the public and may be used for attacks.
๐@cveNotify
GitHub
GitHub - open5gs/open5gs: Open5GS is a C-language Open Source implementation for 5G Core and EPC, i.e. the core network of LTE/NRโฆ
Open5GS is a C-language Open Source implementation for 5G Core and EPC, i.e. the core network of LTE/NR network (Release-19) - open5gs/open5gs
๐จ CVE-2026-15308
The incremental HTML parser (html.parser.HTMLParser) allows for CPU
denial-of-service through repeated unterminated markup declarations when
processing uncontrolled data.
๐@cveNotify
The incremental HTML parser (html.parser.HTMLParser) allows for CPU
denial-of-service through repeated unterminated markup declarations when
processing uncontrolled data.
๐@cveNotify
GitHub
Another worst case quadratic complexity in HTMLParser ยท Issue #153030 ยท python/cpython
Linked PRs gh-153031 gh-153038 gh-153039 gh-153040 gh-153041 gh-153042 gh-153043
๐จ CVE-2026-51597
MERCURY MIPC252W IP camera v1.0.5 Build 230306 Rel.79931n does not implement nonce expiration in RTSP Digest authentication. An adjacent network attacker can capture a legitimate authentication exchange and replay the nonce and response values in a new connection to bypass authentication without knowledge of the device credentials, gaining unauthorized access to the live video stream.
๐@cveNotify
MERCURY MIPC252W IP camera v1.0.5 Build 230306 Rel.79931n does not implement nonce expiration in RTSP Digest authentication. An adjacent network attacker can capture a legitimate authentication exchange and replay the nonce and response values in a new connection to bypass authentication without knowledge of the device credentials, gaining unauthorized access to the live video stream.
๐@cveNotify
GitHub
cve_ID_report/MERCURY_MIPC252W/MERCURY_MIPC252W_5th/README.md at main ยท kkkk2222874/cve_ID_report
ไธๆฅcveๆผๆดไปๅบ. Contribute to kkkk2222874/cve_ID_report development by creating an account on GitHub.
๐จ CVE-2026-51598
An input validation vulnerability in the RTSP service of MERCURY MIPC252W IP Camera v1.0.5 Build 230306 Rel.79931n) allows an unauthenticated, network-adjacent attacker to cause a denial of service via a crafted DESCRIBE request with a malformed URL in the request line.
๐@cveNotify
An input validation vulnerability in the RTSP service of MERCURY MIPC252W IP Camera v1.0.5 Build 230306 Rel.79931n) allows an unauthenticated, network-adjacent attacker to cause a denial of service via a crafted DESCRIBE request with a malformed URL in the request line.
๐@cveNotify
GitHub
cve_ID_report/MERCURY_MIPC252W/MERCURY_MIPC252W_6th/README.md at main ยท kkkk2222874/cve_ID_report
ไธๆฅcveๆผๆดไปๅบ. Contribute to kkkk2222874/cve_ID_report development by creating an account on GitHub.
๐จ CVE-2026-51599
An insufficient input validation vulnerability in the RTSP service of MERCURY MIPC252W v1.0.5 Build 230306 Rel.79931n allows an unauthenticated remote attacker to render an individual TCP connection temporarily unusable via sending an RTSP request with a Content-Length header but no corresponding message body. The affected RTSP parser enters a body-waiting state instead of rejecting the malformed request, causing all subsequent data on the connection to be silently consumed as body content until a server-side timeout closes the connection.
๐@cveNotify
An insufficient input validation vulnerability in the RTSP service of MERCURY MIPC252W v1.0.5 Build 230306 Rel.79931n allows an unauthenticated remote attacker to render an individual TCP connection temporarily unusable via sending an RTSP request with a Content-Length header but no corresponding message body. The affected RTSP parser enters a body-waiting state instead of rejecting the malformed request, causing all subsequent data on the connection to be silently consumed as body content until a server-side timeout closes the connection.
๐@cveNotify
GitHub
cve_ID_report/MERCURY_MIPC252W/MERCURY_MIPC252W_7th/README.md at main ยท kkkk2222874/cve_ID_report
ไธๆฅcveๆผๆดไปๅบ. Contribute to kkkk2222874/cve_ID_report development by creating an account on GitHub.
๐จ CVE-2026-51600
Tenda CP3 V3.0 firmware V31.1.9.91 does not validate the Content-Length header field in RTSP requests (including DESCRIBE, SETUP, and PLAY methods). When a request carrying a Content-Length header is received without a corresponding message body, the RTSP parser enters a persistent body-awaiting state, causing the affected TCP connection to become permanently non-functional. The device does not actively close the connection, resulting in a TCP resource leak. This issue can be exploited by an unauthenticated remote attacker to cause a denial-of-service condition.
๐@cveNotify
Tenda CP3 V3.0 firmware V31.1.9.91 does not validate the Content-Length header field in RTSP requests (including DESCRIBE, SETUP, and PLAY methods). When a request carrying a Content-Length header is received without a corresponding message body, the RTSP parser enters a persistent body-awaiting state, causing the affected TCP connection to become permanently non-functional. The device does not actively close the connection, resulting in a TCP resource leak. This issue can be exploited by an unauthenticated remote attacker to cause a denial-of-service condition.
๐@cveNotify
GitHub
cve_ID_report/Tenda_CP3_V3.0/Tenda_CP3_V3.0/Tenda_CP3_V3.0_1th/README.md at main ยท kkkk2222874/cve_ID_report
ไธๆฅcveๆผๆดไปๅบ. Contribute to kkkk2222874/cve_ID_report development by creating an account on GitHub.