🚨 CVE-2026-57259
The input file does not need to be strictly in a structurally valid PDF format. Instead, after reviewing the content, the original document disguised as a PDF will be sent to the parser. Malicious documents will construct malicious external entities that, through the protocol, point to local paths, thereby allowing access to any local files within the user's permission range.
🎖@cveNotify
The input file does not need to be strictly in a structurally valid PDF format. Instead, after reviewing the content, the original document disguised as a PDF will be sent to the parser. Malicious documents will construct malicious external entities that, through the protocol, point to local paths, thereby allowing access to any local files within the user's permission range.
🎖@cveNotify
Foxit
Security Bulletins | Foxit
A prompt response to software defects and security vulnerabilities has been, and will continue to be, a top priority for everyone here at Foxit Software.
🚨 CVE-2026-56374
ImageMagick before 7.1.2-19 contains a heap buffer overflow vulnerability in the FTXT encoder due to missing boundary checks when parsing ftxt:format. Remote attackers can trigger an out of bounds read by crafting malicious FTXT image files to cause denial of service or information disclosure.
🎖@cveNotify
ImageMagick before 7.1.2-19 contains a heap buffer overflow vulnerability in the FTXT encoder due to missing boundary checks when parsing ftxt:format. Remote attackers can trigger an out of bounds read by crafting malicious FTXT image files to cause denial of service or information disclosure.
🎖@cveNotify
GitHub
Heap-buffer-overflow in FTXT encoder
The FTXT encoder lacks a boundary check when parsing `ftxt:format`, resulting in an out of bounds read.
```
==3040863==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020000085b2 at...
```
==3040863==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020000085b2 at...
🚨 CVE-2023-2373
A vulnerability was identified in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. This vulnerability affects unknown code of the component Web Management Interface. Such manipulation of the argument ecn-up leads to command injection. The attack may be performed from remote. The exploit is publicly available and might be used. The actual existence of this vulnerability is currently in question. The vendor position is that post-authentication issues are not accepted as vulnerabilities.
🎖@cveNotify
A vulnerability was identified in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. This vulnerability affects unknown code of the component Web Management Interface. Such manipulation of the argument ecn-up leads to command injection. The attack may be performed from remote. The exploit is publicly available and might be used. The actual existence of this vulnerability is currently in question. The vendor position is that post-authentication issues are not accepted as vulnerabilities.
🎖@cveNotify
🚨 CVE-2023-2374
A security flaw has been discovered in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. This issue affects some unknown processing of the component Web Management Interface. Performing a manipulation of the argument ecn-down results in command injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The existence of this vulnerability is still disputed at present. The vendor position is that post-authentication issues are not accepted as vulnerabilities.
🎖@cveNotify
A security flaw has been discovered in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. This issue affects some unknown processing of the component Web Management Interface. Performing a manipulation of the argument ecn-down results in command injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The existence of this vulnerability is still disputed at present. The vendor position is that post-authentication issues are not accepted as vulnerabilities.
🎖@cveNotify
🚨 CVE-2023-2375
A weakness has been identified in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. Impacted is an unknown function of the component Web Management Interface. Executing a manipulation of the argument src can lead to command injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks. The presence of this vulnerability remains uncertain at this time. The vendor position is that post-authentication issues are not accepted as vulnerabilities.
🎖@cveNotify
A weakness has been identified in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. Impacted is an unknown function of the component Web Management Interface. Executing a manipulation of the argument src can lead to command injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks. The presence of this vulnerability remains uncertain at this time. The vendor position is that post-authentication issues are not accepted as vulnerabilities.
🎖@cveNotify
🚨 CVE-2023-2376
A security vulnerability has been detected in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. The affected element is an unknown function of the component Web Management Interface. The manipulation of the argument dpi leads to command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. There are still doubts about whether this vulnerability truly exists. The vendor position is that post-authentication issues are not accepted as vulnerabilities.
🎖@cveNotify
A security vulnerability has been detected in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. The affected element is an unknown function of the component Web Management Interface. The manipulation of the argument dpi leads to command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. There are still doubts about whether this vulnerability truly exists. The vendor position is that post-authentication issues are not accepted as vulnerabilities.
🎖@cveNotify
🚨 CVE-2023-2377
A vulnerability was detected in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. The impacted element is an unknown function of the component Web Management Interface. The manipulation of the argument Name results in command injection. The attack can be launched remotely. The exploit is now public and may be used. There is ongoing doubt regarding the real existence of this vulnerability. The vendor position is that post-authentication issues are not accepted as vulnerabilities.
🎖@cveNotify
A vulnerability was detected in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. The impacted element is an unknown function of the component Web Management Interface. The manipulation of the argument Name results in command injection. The attack can be launched remotely. The exploit is now public and may be used. There is ongoing doubt regarding the real existence of this vulnerability. The vendor position is that post-authentication issues are not accepted as vulnerabilities.
🎖@cveNotify
🚨 CVE-2023-2378
A flaw has been found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. This affects an unknown function of the component Web Management Interface. This manipulation of the argument suffix-rate-up causes command injection. The attack may be initiated remotely. The exploit has been published and may be used. The real existence of this vulnerability is still doubted at the moment. The vendor position is that post-authentication issues are not accepted as vulnerabilities.
🎖@cveNotify
A flaw has been found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. This affects an unknown function of the component Web Management Interface. This manipulation of the argument suffix-rate-up causes command injection. The attack may be initiated remotely. The exploit has been published and may be used. The real existence of this vulnerability is still doubted at the moment. The vendor position is that post-authentication issues are not accepted as vulnerabilities.
🎖@cveNotify
🚨 CVE-2025-44203
In HotelDruid 3.0.0 and 3.0.7, the unauthenticated database-setup endpoint creadb.php can be reached before setup is completed and performs database creation without locking. By sending many concurrent requests, an attacker can trigger a race condition during which verbose SQL error messages disclose the administrator username, password hash, and salt. The same race leaves the setup partially initialized, so the administrator can no longer log in with the credentials set during installation, resulting in a denial of service that requires reinstallation to recover. Remote exploitation additionally requires the installation to allow non-localhost access. The vulnerability was fixed in version 3.0.8.
🎖@cveNotify
In HotelDruid 3.0.0 and 3.0.7, the unauthenticated database-setup endpoint creadb.php can be reached before setup is completed and performs database creation without locking. By sending many concurrent requests, an attacker can trigger a race condition during which verbose SQL error messages disclose the administrator username, password hash, and salt. The same race leaves the setup partially initialized, so the administrator can no longer log in with the credentials set during installation, resulting in a denial of service that requires reinstallation to recover. Remote exploitation additionally requires the installation to allow non-localhost access. The vulnerability was fixed in version 3.0.8.
🎖@cveNotify
GitHub
GitHub - IvanT7D3/CVE-2025-44203: CVE-2025-44203 - HotelDruid 3.0.0/3.0.7 - Sensitive Information Disclosure, DoS
CVE-2025-44203 - HotelDruid 3.0.0/3.0.7 - Sensitive Information Disclosure, DoS - IvanT7D3/CVE-2025-44203
🚨 CVE-2026-38971
ardupilot through Plane-4.6.3 was found to contain an out-of-bounds read issue in libraries/GCS_MAVLink/GCS_serial_control.cpp in GCS_MAVLINK::handle_serial_control().
🎖@cveNotify
ardupilot through Plane-4.6.3 was found to contain an out-of-bounds read issue in libraries/GCS_MAVLink/GCS_serial_control.cpp in GCS_MAVLINK::handle_serial_control().
🎖@cveNotify
Gist
Unchecked MAVLink SERIAL_CONTROL count causes out-of-bounds read in ArduPilot
Unchecked MAVLink SERIAL_CONTROL count causes out-of-bounds read in ArduPilot - Bug Report
🚨 CVE-2026-14788
A security vulnerability has been detected in radareorg radare2 up to 6.1.6. Affected by this vulnerability is the function r_core_bin_load of the file libr/core/cfile.c. Such manipulation leads to use after free. The attack needs to be performed locally. The exploit has been disclosed publicly and may be used. The name of the patch is 635ab1eeb30340c26076722a90cb91fb2272130b. Applying a patch is advised to resolve this issue.
🎖@cveNotify
A security vulnerability has been detected in radareorg radare2 up to 6.1.6. Affected by this vulnerability is the function r_core_bin_load of the file libr/core/cfile.c. Such manipulation leads to use after free. The attack needs to be performed locally. The exploit has been disclosed publicly and may be used. The name of the patch is 635ab1eeb30340c26076722a90cb91fb2272130b. Applying a patch is advised to resolve this issue.
🎖@cveNotify
GitHub
Fix #26049 - cmd.load descriptor UAF in bin load ##crash · oldzhu/radare2@635ab1e
UNIX-like reverse engineering framework and command-line toolset - Fix #26049 - cmd.load descriptor UAF in bin load ##crash · oldzhu/radare2@635ab1e
🚨 CVE-2026-14789
A vulnerability was detected in radareorg radare2 up to 6.1.6. Affected by this issue is some unknown functionality of the file libr/bin/format/mdmp/mdmp.c of the component Memory64ListStream Parser. Performing a manipulation results in stack-based buffer overflow. The attack requires a local approach. The exploit is now public and may be used. The patch is named 175d4addb68981331c85b10681c2161c38fb5762. It is suggested to install a patch to address this issue.
🎖@cveNotify
A vulnerability was detected in radareorg radare2 up to 6.1.6. Affected by this issue is some unknown functionality of the file libr/bin/format/mdmp/mdmp.c of the component Memory64ListStream Parser. Performing a manipulation results in stack-based buffer overflow. The attack requires a local approach. The exploit is now public and may be used. The patch is named 175d4addb68981331c85b10681c2161c38fb5762. It is suggested to install a patch to address this issue.
🎖@cveNotify
GitHub
Fix #26051 - oobread on truncated mdmp files ##crash · mengzhisuoliu/radare2@175d4ad
UNIX-like reverse engineering framework and command-line toolset - Fix #26051 - oobread on truncated mdmp files ##crash · mengzhisuoliu/radare2@175d4ad
🚨 CVE-2026-56811
Allocation of Resources Without Limits or Throttling vulnerability in phoenixframework phoenix (Phoenix.Socket module) allows an unauthenticated attacker to cause a denial of service against any endpoint that mounts a Phoenix socket with a reachable channel transport (WebSocket or LongPoll).
This vulnerability is associated with program files lib/phoenix/socket.ex and program routine 'Elixir.Phoenix.Socket':handle_in/4.
Phoenix transports do not limit the number of channels that a single transport process may join. Every phx_join message a client sends over one connection starts a persistent channel process, and the socket process accepts an unbounded number of them. A single unauthenticated client can therefore open one WebSocket or LongPoll connection and stream a large number of phx_join messages, spawning hundreds of thousands of channel processes over that one connection and eventually reaching the BEAM maximum process limit. Once the process table is exhausted the virtual machine can no longer start new processes, denying service to legitimate traffic across the whole node. Because the amplification happens inside a single connection, network-layer connection caps and rate limiting do not mitigate it.
The fix adds a :max_channels_per_transport option (default 100) that bounds the number of channels a single transport process can join, forcing abusive clients to open many connections instead, where external load balancers and reverse proxies can throttle them.
This issue affects phoenix: from 0.11.0 before 1.5.15, from 1.6.0-rc.0 before 1.6.17, from 1.7.0-rc.0 before 1.7.24, and from 1.8.0-rc.0 before 1.8.9.
🎖@cveNotify
Allocation of Resources Without Limits or Throttling vulnerability in phoenixframework phoenix (Phoenix.Socket module) allows an unauthenticated attacker to cause a denial of service against any endpoint that mounts a Phoenix socket with a reachable channel transport (WebSocket or LongPoll).
This vulnerability is associated with program files lib/phoenix/socket.ex and program routine 'Elixir.Phoenix.Socket':handle_in/4.
Phoenix transports do not limit the number of channels that a single transport process may join. Every phx_join message a client sends over one connection starts a persistent channel process, and the socket process accepts an unbounded number of them. A single unauthenticated client can therefore open one WebSocket or LongPoll connection and stream a large number of phx_join messages, spawning hundreds of thousands of channel processes over that one connection and eventually reaching the BEAM maximum process limit. Once the process table is exhausted the virtual machine can no longer start new processes, denying service to legitimate traffic across the whole node. Because the amplification happens inside a single connection, network-layer connection caps and rate limiting do not mitigate it.
The fix adds a :max_channels_per_transport option (default 100) that bounds the number of channels a single transport process can join, forcing abusive clients to open many connections instead, where external load balancers and reverse proxies can throttle them.
This issue affects phoenix: from 0.11.0 before 1.5.15, from 1.6.0-rc.0 before 1.6.17, from 1.7.0-rc.0 before 1.7.24, and from 1.8.0-rc.0 before 1.8.9.
🎖@cveNotify
Erlang Ecosystem Foundation CNA
Phoenix transports do not limit channel joins per connection, enabling process-exhaustion denial of service
This project handles the CVE Numbering Authority (CNA) for the Erlang Ecosystem Foundation (EEF).
🚨 CVE-2026-49471
Serena is a powerful MCP toolkit for coding that provides semantic retrieval and editing capabilities. Prior to v1.5.2, Serena's built-in web dashboard exposes an unauthenticated Flask API on a fixed, predictable port, with no authentication, no CSRF protection, and no Host header validation. A DNS rebinding attack allows a malicious webpage to reach this API from any browser and write arbitrary content to the agent's persistent memory store, which the agent reads and acts on autonomously. Combined with execute_shell_command using shell=True, this creates a remote code execution chain requiring only that the victim visit a malicious webpage while Serena is running. This issue is fixed in version v1.5.2.
🎖@cveNotify
Serena is a powerful MCP toolkit for coding that provides semantic retrieval and editing capabilities. Prior to v1.5.2, Serena's built-in web dashboard exposes an unauthenticated Flask API on a fixed, predictable port, with no authentication, no CSRF protection, and no Host header validation. A DNS rebinding attack allows a malicious webpage to reach this API from any browser and write arbitrary content to the agent's persistent memory store, which the agent reads and acts on autonomously. Combined with execute_shell_command using shell=True, this creates a remote code execution chain requiring only that the victim visit a malicious webpage while Serena is running. This issue is fixed in version v1.5.2.
🎖@cveNotify
GitHub
Dashboard: validate host and port on each request · oraios/serena@016ccbe
A powerful MCP toolkit for coding, providing semantic retrieval and editing capabilities - the IDE for your agent - Dashboard: validate host and port on each request · oraios/serena@016ccbe
🚨 CVE-2026-49229
Actual is a local-first personal finance app. Prior to 26.6.0, in OpenID multi-user mode, disabling a user only blocks future OpenID login for that identity, while existing Actual session tokens for the disabled user remain valid. The shared session validation path accepts any existing token row that has not expired without checking whether the associated user is still enabled, allowing a disabled user to continue calling authenticated server endpoints. This issue is fixed in version 26.6.0.
🎖@cveNotify
Actual is a local-first personal finance app. Prior to 26.6.0, in OpenID multi-user mode, disabling a user only blocks future OpenID login for that identity, while existing Actual session tokens for the disabled user remain valid. The shared session validation path accepts any existing token row that has not expired without checking whether the associated user is still enabled, allowing a disabled user to continue calling authenticated server endpoints. This issue is fixed in version 26.6.0.
🎖@cveNotify
GitHub
[AI] Reject disabled-user sessions in sync-server (#7940) · actualbudget/actual@c8cb8a2
* [AI] Reject disabled-user sessions in sync-server
Sync-server validateSession previously accepted any unexpired token,
so a disabled user kept post-authentication access until their session
row ...
Sync-server validateSession previously accepted any unexpired token,
so a disabled user kept post-authentication access until their session
row ...
🚨 CVE-2026-44840
Dgraph is an open source distributed GraphQL database. Prior to version 25.3.4, the `checkUserPassword` GraphQL query in Dgraph is vulnerable to DQL (Dgraph Query Language) injection. User-supplied password values are interpolated directly into a DQL `checkpwd()` query via `fmt.Sprintf` without any escaping or parameterization. An attacker can inject a password containing a double-quote character to break out of the DQL string literal and append arbitrary DQL query blocks. Version 25.3.4 patches the issue.
🎖@cveNotify
Dgraph is an open source distributed GraphQL database. Prior to version 25.3.4, the `checkUserPassword` GraphQL query in Dgraph is vulnerable to DQL (Dgraph Query Language) injection. User-supplied password values are interpolated directly into a DQL `checkpwd()` query via `fmt.Sprintf` without any escaping or parameterization. An attacker can inject a password containing a double-quote character to break out of the DQL string literal and append arbitrary DQL query blocks. Version 25.3.4 patches the issue.
🎖@cveNotify
GitHub
Merge commit from fork · dgraph-io/dgraph@cee702c
Co-authored-by: Matthew McNeely <matthew.mcneely@gmail.com>
🚨 CVE-2026-53482
Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an Integer overflow or wraparound vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service.
🎖@cveNotify
Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an Integer overflow or wraparound vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service.
🎖@cveNotify
🚨 CVE-2026-56273
Flowise before 3.1.0 contains a path traversal vulnerability in Faiss and SimpleStore vector store implementations that accept unsanitized basePath parameters from authenticated users. Attackers with valid API tokens can write vector store data to arbitrary filesystem locations, potentially enabling code execution or data exfiltration.
🎖@cveNotify
Flowise before 3.1.0 contains a path traversal vulnerability in Faiss and SimpleStore vector store implementations that accept unsanitized basePath parameters from authenticated users. Attackers with valid API tokens can write vector store data to arbitrary filesystem locations, potentially enabling code execution or data exfiltration.
🎖@cveNotify
GitHub
Path Traversal in Vector Store basePath
## Summary
The Faiss and SimpleStore (LlamaIndex) vector store implementations accept a `basePath` parameter from user-controlled input and pass it directly to filesystem write operations withou...
The Faiss and SimpleStore (LlamaIndex) vector store implementations accept a `basePath` parameter from user-controlled input and pass it directly to filesystem write operations withou...
🚨 CVE-2026-56359
n8n before 2.8.0 contains a cross-site scripting vulnerability in the credential management flow where authenticated users can inject malicious JavaScript URLs into OAuth2 credential Authorization URL fields. Attackers can craft malicious credentials and trick victims into clicking the OAuth authorization button, executing arbitrary scripts in their browser session with the victim's privileges.
🎖@cveNotify
n8n before 2.8.0 contains a cross-site scripting vulnerability in the credential management flow where authenticated users can inject malicious JavaScript URLs into OAuth2 credential Authorization URL fields. Attackers can craft malicious credentials and trick victims into clicking the OAuth authorization button, executing arbitrary scripts in their browser session with the victim's privileges.
🎖@cveNotify
GitHub
XSS in Credential Management Flow
## Impact
An authenticated user with permission to create and share credentials could craft a malicious OAuth2 credential containing a JavaScript URL in the Authorization URL field. If a victim ope...
An authenticated user with permission to create and share credentials could craft a malicious OAuth2 credential containing a JavaScript URL in the Authorization URL field. If a victim ope...
🚨 CVE-2026-56362
ImageMagick before 7.1.2-15 contains a heap-buffer-overflow read vulnerability in GetPixelIndex caused by OpenPixelCache updating image channel metadata before pixel cache memory allocation. Attackers can trigger memory and disk allocation failures to cause a heap-buffer-overflow read affecting any writer calling GetPixelIndex.
🎖@cveNotify
ImageMagick before 7.1.2-15 contains a heap-buffer-overflow read vulnerability in GetPixelIndex caused by OpenPixelCache updating image channel metadata before pixel cache memory allocation. Attackers can trigger memory and disk allocation failures to cause a heap-buffer-overflow read affecting any writer calling GetPixelIndex.
🎖@cveNotify
GitHub
Heap-buffer-overflow read in GetPixelIndex due to metadata-cache desynchronization in OpenPixelCache
`OpenPixelCache` updates image channel metadata **before** attempting pixel cache memory allocation. When both memory and disk allocation fail a heap-buffer-overflow read in occurs in any writer t...
🚨 CVE-2026-59257
n8n before 1.123.61, 2.x before 2.27.4, and 2.28.x before 2.28.1 contains a SQL injection vulnerability in the legacy MySQL v1 node's executeQuery operation. The operation substitutes evaluated {{ ... }} expression values directly into the raw SQL string without parameterization. When a workflow uses this operation with expression-sourced values and is connected to an externally-reachable trigger (such as a Webhook node), attacker-controlled input reaching those expressions results in SQL injection, allowing execution of arbitrary SQL with the configured MySQL credentials' privileges. The MySQL v2 node, which uses parameterized queries, is not affected.
🎖@cveNotify
n8n before 1.123.61, 2.x before 2.27.4, and 2.28.x before 2.28.1 contains a SQL injection vulnerability in the legacy MySQL v1 node's executeQuery operation. The operation substitutes evaluated {{ ... }} expression values directly into the raw SQL string without parameterization. When a workflow uses this operation with expression-sourced values and is connected to an externally-reachable trigger (such as a Webhook node), attacker-controlled input reaching those expressions results in SQL injection, allowing execution of arbitrary SQL with the configured MySQL credentials' privileges. The MySQL v2 node, which uses parameterized queries, is not affected.
🎖@cveNotify
GitHub
MySQL v1 Node executeQuery Operation Allows SQL Injection via Unparameterized Expression Interpolation
## Impact
The legacy MySQL v1 node's `executeQuery` operation substitutes evaluated `{{ ... }}` expression values directly into the raw SQL string without parameterization. If a workflow uses t...
The legacy MySQL v1 node's `executeQuery` operation substitutes evaluated `{{ ... }}` expression values directly into the raw SQL string without parameterization. If a workflow uses t...