🚨 CVE-2026-33186
gRPC-Go is the Go language implementation of gRPC. Versions prior to 1.79.3 have an authorization bypass resulting from improper input validation of the HTTP/2 `:path` pseudo-header. The gRPC-Go server was too lenient in its routing logic, accepting requests where the `:path` omitted the mandatory leading slash (e.g., `Service/Method` instead of `/Service/Method`). While the server successfully routed these requests to the correct handler, authorization interceptors (including the official `grpc/authz` package) evaluated the raw, non-canonical path string. Consequently, "deny" rules defined using canonical paths (starting with `/`) failed to match the incoming request, allowing it to bypass the policy if a fallback "allow" rule was present. This affects gRPC-Go servers that use path-based authorization interceptors, such as the official RBAC implementation in `google.golang.org/grpc/authz` or custom interceptors relying on `info.FullMethod` or `grpc.Method(ctx)`; AND that have a security policy contains specific "deny" rules for canonical paths but allows other requests by default (a fallback "allow" rule). The vulnerability is exploitable by an attacker who can send raw HTTP/2 frames with malformed `:path` headers directly to the gRPC server. The fix in version 1.79.3 ensures that any request with a `:path` that does not start with a leading slash is immediately rejected with a `codes.Unimplemented` error, preventing it from reaching authorization interceptors or handlers with a non-canonical path string. While upgrading is the most secure and recommended path, users can mitigate the vulnerability using one of the following methods: Use a validating interceptor (recommended mitigation); infrastructure-level normalization; and/or policy hardening.
🎖@cveNotify
gRPC-Go is the Go language implementation of gRPC. Versions prior to 1.79.3 have an authorization bypass resulting from improper input validation of the HTTP/2 `:path` pseudo-header. The gRPC-Go server was too lenient in its routing logic, accepting requests where the `:path` omitted the mandatory leading slash (e.g., `Service/Method` instead of `/Service/Method`). While the server successfully routed these requests to the correct handler, authorization interceptors (including the official `grpc/authz` package) evaluated the raw, non-canonical path string. Consequently, "deny" rules defined using canonical paths (starting with `/`) failed to match the incoming request, allowing it to bypass the policy if a fallback "allow" rule was present. This affects gRPC-Go servers that use path-based authorization interceptors, such as the official RBAC implementation in `google.golang.org/grpc/authz` or custom interceptors relying on `info.FullMethod` or `grpc.Method(ctx)`; AND that have a security policy contains specific "deny" rules for canonical paths but allows other requests by default (a fallback "allow" rule). The vulnerability is exploitable by an attacker who can send raw HTTP/2 frames with malformed `:path` headers directly to the gRPC server. The fix in version 1.79.3 ensures that any request with a `:path` that does not start with a leading slash is immediately rejected with a `codes.Unimplemented` error, preventing it from reaching authorization interceptors or handlers with a non-canonical path string. While upgrading is the most secure and recommended path, users can mitigate the vulnerability using one of the following methods: Use a validating interceptor (recommended mitigation); infrastructure-level normalization; and/or policy hardening.
🎖@cveNotify
GitHub
Authorization bypass via missing leading slash in :path
### Impact
_What kind of vulnerability is it? Who is impacted?_
It is an **Authorization Bypass** (CWE-285) resulting from **Improper Input Validation** (CWE-20) of the HTTP/2 `:path` pseudo-he...
_What kind of vulnerability is it? Who is impacted?_
It is an **Authorization Bypass** (CWE-285) resulting from **Improper Input Validation** (CWE-20) of the HTTP/2 `:path` pseudo-he...
🚨 CVE-2026-33211
Tekton Pipelines project provides k8s-style resources for declaring CI/CD-style pipelines. Starting in version 1.0.0 and prior to versions 1.0.1, 1.3.3, 1.6.1, 1.9.2, and 1.10.2, the Tekton Pipelines git resolver is vulnerable to path traversal via the `pathInRepo` parameter. A tenant with permission to create `ResolutionRequests` (e.g. by creating `TaskRuns` or `PipelineRuns` that use the git resolver) can read arbitrary files from the resolver pod's filesystem, including ServiceAccount tokens. The file contents are returned base64-encoded in `resolutionrequest.status.data`. Versions 1.0.1, 1.3.3, 1.6.1, 1.9.2, and 1.10.2 contain a patch.
🎖@cveNotify
Tekton Pipelines project provides k8s-style resources for declaring CI/CD-style pipelines. Starting in version 1.0.0 and prior to versions 1.0.1, 1.3.3, 1.6.1, 1.9.2, and 1.10.2, the Tekton Pipelines git resolver is vulnerable to path traversal via the `pathInRepo` parameter. A tenant with permission to create `ResolutionRequests` (e.g. by creating `TaskRuns` or `PipelineRuns` that use the git resolver) can read arbitrary files from the resolver pod's filesystem, including ServiceAccount tokens. The file contents are returned base64-encoded in `resolutionrequest.status.data`. Versions 1.0.1, 1.3.3, 1.6.1, 1.9.2, and 1.10.2 contain a patch.
🎖@cveNotify
GitHub
fix: prevent path traversal in git resolver pathInRepo parameter · tektoncd/pipeline@10fa538
The git resolver's pathInRepo parameter was not validated for path
traversal, allowing a tenant to read arbitrary files from the resolver
pod's filesystem by supplying paths like &a...
traversal, allowing a tenant to read arbitrary files from the resolver
pod's filesystem by supplying paths like &a...
🚨 CVE-2026-33487
goxmlsig provides XML Digital Signatures implemented in Go. Prior to version 1.6.0, the `validateSignature` function in `validate.go` goes through the references in the `SignedInfo` block to find one that matches the signed element's ID. In Go versions before 1.22, or when `go.mod` uses an older version, there is a loop variable capture issue. The code takes the address of the loop variable `_ref` instead of its value. As a result, if more than one reference matches the ID or if the loop logic is incorrect, the `ref` pointer will always end up pointing to the last element in the `SignedInfo.References` slice after the loop. goxmlsig version 1.6.0 contains a patch.
🎖@cveNotify
goxmlsig provides XML Digital Signatures implemented in Go. Prior to version 1.6.0, the `validateSignature` function in `validate.go` goes through the references in the `SignedInfo` block to find one that matches the signed element's ID. In Go versions before 1.22, or when `go.mod` uses an older version, there is a loop variable capture issue. The code takes the address of the loop variable `_ref` instead of its value. As a result, if more than one reference matches the ID or if the loop logic is incorrect, the `ref` pointer will always end up pointing to the last element in the `SignedInfo.References` slice after the loop. goxmlsig version 1.6.0 contains a patch.
🎖@cveNotify
GitHub
validateSignature Loop Variable Capture Signature Bypass in goxmldsig
### Details
The `validateSignature` function in `validate.go` goes through the references in the `SignedInfo` block to find one that matches the signed element's ID. In Go versions before 1....
The `validateSignature` function in `validate.go` goes through the references in the `SignedInfo` block to find one that matches the signed element's ID. In Go versions before 1....
🚨 CVE-2026-4926
Impact:
A bad regular expression is generated any time you have multiple sequential optional groups (curly brace syntax), such as `{a}{b}{c}:z`. The generated regex grows exponentially with the number of groups, causing denial of service.
Patches:
Fixed in version 8.4.0.
Workarounds:
Limit the number of sequential optional groups in route patterns. Avoid passing user-controlled input as route patterns.
🎖@cveNotify
Impact:
A bad regular expression is generated any time you have multiple sequential optional groups (curly brace syntax), such as `{a}{b}{c}:z`. The generated regex grows exponentially with the number of groups, causing denial of service.
Patches:
Fixed in version 8.4.0.
Workarounds:
Limit the number of sequential optional groups in route patterns. Avoid passing user-controlled input as route patterns.
🎖@cveNotify
OpenJS Foundation CVE Numbering Authority
Security Advisories
The OpenJS Foundation’s CVE Numbering Authority (CNA)
🚨 CVE-2026-32285
The Delete function fails to properly validate offsets when processing malformed JSON input. This can lead to a negative slice index and a runtime panic, allowing a denial of service attack.
🎖@cveNotify
The Delete function fails to properly validate offsets when processing malformed JSON input. This can lead to a negative slice index and a runtime panic, allowing a denial of service attack.
🎖@cveNotify
GitHub
Panic in Delete() via slice bounds out of range [-1:] on malformed input (v1.1.1) · Issue #275 · buger/jsonparser
Summary github.com/buger/jsonparser v1.1.1 panics with a negative slice index in the Delete() function when given malformed JSON input. This is a denial-of-service vulnerability - any service that ...
🚨 CVE-2026-4800
Impact:
The fix for CVE-2021-23337 (https://github.com/advisories/GHSA-35jh-r3h4-6jhm) added validation for the variable option in _.template but did not apply the same validation to options.imports key names. Both paths flow into the same Function() constructor sink.
When an application passes untrusted input as options.imports key names, an attacker can inject default-parameter expressions that execute arbitrary code at template compilation time.
Additionally, _.template uses assignInWith to merge imports, which enumerates inherited properties via for..in. If Object.prototype has been polluted by any other vector, the polluted keys are copied into the imports object and passed to Function().
Patches:
Users should upgrade to version 4.18.0.
Workarounds:
Do not pass untrusted input as key names in options.imports. Only use developer-controlled, static key names.
🎖@cveNotify
Impact:
The fix for CVE-2021-23337 (https://github.com/advisories/GHSA-35jh-r3h4-6jhm) added validation for the variable option in _.template but did not apply the same validation to options.imports key names. Both paths flow into the same Function() constructor sink.
When an application passes untrusted input as options.imports key names, an attacker can inject default-parameter expressions that execute arbitrary code at template compilation time.
Additionally, _.template uses assignInWith to merge imports, which enumerates inherited properties via for..in. If Object.prototype has been polluted by any other vector, the polluted keys are copied into the imports object and passed to Function().
Patches:
Users should upgrade to version 4.18.0.
Workarounds:
Do not pass untrusted input as key names in options.imports. Only use developer-controlled, static key names.
🎖@cveNotify
OpenJS Foundation CVE Numbering Authority
Security Advisories
The OpenJS Foundation’s CVE Numbering Authority (CNA)
🚨 CVE-2026-27140
SWIG file names containing 'cgo' and well-crafted payloads could lead to code smuggling and arbitrary code execution at build time due to trust layer bypass.
🎖@cveNotify
SWIG file names containing 'cgo' and well-crafted payloads could lead to code smuggling and arbitrary code execution at build time due to trust layer bypass.
🎖@cveNotify
🚨 CVE-2026-32280
During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 and users of crypto/tls.
🎖@cveNotify
During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 and users of crypto/tls.
🎖@cveNotify
🚨 CVE-2026-32283
If one side of the TLS connection sends multiple key update messages post-handshake in a single record, the connection can deadlock, causing uncontrolled consumption of resources. This can lead to a denial of service. This only affects TLS 1.3.
🎖@cveNotify
If one side of the TLS connection sends multiple key update messages post-handshake in a single record, the connection can deadlock, causing uncontrolled consumption of resources. This can lead to a denial of service. This only affects TLS 1.3.
🎖@cveNotify
🚨 CVE-2026-33810
When verifying a certificate chain containing excluded DNS constraints, these constraints are not correctly applied to wildcard DNS SANs which use a different case than the constraint. This only affects validation of otherwise trusted certificate chains, issued by a root CA in the VerifyOptions.Roots CertPool, or in the system certificate pool.
🎖@cveNotify
When verifying a certificate chain containing excluded DNS constraints, these constraints are not correctly applied to wildcard DNS SANs which use a different case than the constraint. This only affects validation of otherwise trusted certificate chains, issued by a root CA in the VerifyOptions.Roots CertPool, or in the system certificate pool.
🎖@cveNotify
🚨 CVE-2025-62718
Axios is a promise based HTTP client for the browser and Node.js. Prior to 1.15.0 and 0.31.0, Axios does not correctly handle hostname normalization when checking NO_PROXY rules. Requests to loopback addresses like localhost. (with a trailing dot) or [::1] (IPv6 literal) skip NO_PROXY matching and go through the configured proxy. This goes against what developers expect and lets attackers force requests through a proxy, even if NO_PROXY is set up to protect loopback or internal services. This issue leads to the possibility of proxy bypass and SSRF vulnerabilities allowing attackers to reach sensitive loopback or internal services despite the configured protections. This vulnerability is fixed in 1.15.0 and 0.31.0.
🎖@cveNotify
Axios is a promise based HTTP client for the browser and Node.js. Prior to 1.15.0 and 0.31.0, Axios does not correctly handle hostname normalization when checking NO_PROXY rules. Requests to loopback addresses like localhost. (with a trailing dot) or [::1] (IPv6 literal) skip NO_PROXY matching and go through the configured proxy. This goes against what developers expect and lets attackers force requests through a proxy, even if NO_PROXY is set up to protect loopback or internal services. This issue leads to the possibility of proxy bypass and SSRF vulnerabilities allowing attackers to reach sensitive loopback or internal services despite the configured protections. This vulnerability is fixed in 1.15.0 and 0.31.0.
🎖@cveNotify
IETF Datatracker
RFC 1034: Domain names - concepts and facilities
This RFC is the revised basic definition of The Domain Name System. It obsoletes RFC-882. This memo describes the domain style names and their used for host address look up and electronic mail forwarding. It discusses the clients and servers in the domain…
🚨 CVE-2026-29146
Padding Oracle vulnerability in Apache Tomcat's EncryptInterceptor with default configuration.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.18, from 10.0.0-M1 through 10.1.52, from 9.0.13 through 9..115, from 8.5.38 through 8.5.100, from 7.0.100 through 7.0.109.
Users are recommended to upgrade to version 11.0.19, 10.1.53 and 9.0.116, which fixes the issue.
🎖@cveNotify
Padding Oracle vulnerability in Apache Tomcat's EncryptInterceptor with default configuration.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.18, from 10.0.0-M1 through 10.1.52, from 9.0.13 through 9..115, from 8.5.38 through 8.5.100, from 7.0.100 through 7.0.109.
Users are recommended to upgrade to version 11.0.19, 10.1.53 and 9.0.116, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-34486
Missing Encryption of Sensitive Data vulnerability in Apache Tomcat due to the fix for CVE-2026-29146 allowing the bypass of the EncryptInterceptor.
This issue affects Apache Tomcat: 11.0.20, 10.1.53, 9.0.116.
Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117, which fix the issue.
🎖@cveNotify
Missing Encryption of Sensitive Data vulnerability in Apache Tomcat due to the fix for CVE-2026-29146 allowing the bypass of the EncryptInterceptor.
This issue affects Apache Tomcat: 11.0.20, 10.1.53, 9.0.116.
Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117, which fix the issue.
🎖@cveNotify
🚨 CVE-2026-40175
Axios is a promise based HTTP client for the browser and Node.js. Versions prior to 1.15.0 and 0.3.1 are vulnerable to a specific gadget-style attack chain in which prototype pollution in a third-party dependency may be leveraged to inject unsanitized header values into outbound requests. This vulnerability is fixed in 1.15.0 and 0.3.1.
🎖@cveNotify
Axios is a promise based HTTP client for the browser and Node.js. Versions prior to 1.15.0 and 0.3.1 are vulnerable to a specific gadget-style attack chain in which prototype pollution in a third-party dependency may be leveraged to inject unsanitized header values into outbound requests. This vulnerability is fixed in 1.15.0 and 0.3.1.
🎖@cveNotify
GitHub
fix: backport the fixes from the v1 branch (#10688) · axios/axios@03cdfc9
* fix: backport the fixes from the v1 branch
* chore: fix feedback from cubic
* chore: fix possible incorrect handleing
* chore: fix feedback from cubic
* chore: fix possible incorrect handleing
🚨 CVE-2026-35469
spdystream is a Go library for multiplexing streams over SPDY connections. In versions 0.5.0 and below, the SPDY/3 frame parser does not validate attacker-controlled counts and lengths before allocating memory. Three allocation paths are affected: the SETTINGS frame entry count, the header count in parseHeaderValueBlock, and individual header field sizes — all read as 32-bit integers and used directly as allocation sizes with no bounds checking. Because SPDY header blocks are zlib-compressed, a small on-the-wire payload can decompress into large attacker-controlled values. A remote peer that can send SPDY frames to a service using spdystream can exhaust process memory and cause an out-of-memory crash with a single crafted control frame. This issue has been fixed in version 0.5.1.
🎖@cveNotify
spdystream is a Go library for multiplexing streams over SPDY connections. In versions 0.5.0 and below, the SPDY/3 frame parser does not validate attacker-controlled counts and lengths before allocating memory. Three allocation paths are affected: the SETTINGS frame entry count, the header count in parseHeaderValueBlock, and individual header field sizes — all read as 32-bit integers and used directly as allocation sizes with no bounds checking. Because SPDY header blocks are zlib-compressed, a small on-the-wire payload can decompress into large attacker-controlled values. A remote peer that can send SPDY frames to a service using spdystream can exhaust process memory and cause an out-of-memory crash with a single crafted control frame. This issue has been fixed in version 0.5.1.
🎖@cveNotify
GitHub
Release v0.5.1 · moby/spdystream
What's Changed
Security
Fix memory amplification in SPDY frame parsing leads to denial of service (CVE-2026-35469 / GHSA-pc3f-x583-g7j2)
Changes
spdy: fix duplicate license headers, add LICENS...
Security
Fix memory amplification in SPDY frame parsing leads to denial of service (CVE-2026-35469 / GHSA-pc3f-x583-g7j2)
Changes
spdy: fix duplicate license headers, add LICENS...
🚨 CVE-2026-40293
OpenFGA is an authorization/permission engine built for developers. In versions 0.1.4 through 1.13.1, when OpenFGA is configured to use preshared-key authentication with the built-in playground enabled, the local server includes the preshared API key in the HTML response of the /playground endpoint. The /playground endpoint is enabled by default and does not require authentication. It is intended for local development and debugging and is not designed to be exposed to production environments. Only those who run OpenFGA with `--authn-method` preshared, with the playground enabled, and with the playground endpoint accessible beyond localhost or trusted networks are vulnerable. To remediate the issue, users should upgrade to OpenFGA v1.14.0, or disable the playground by running `./openfga run --playground-enabled=false.`
🎖@cveNotify
OpenFGA is an authorization/permission engine built for developers. In versions 0.1.4 through 1.13.1, when OpenFGA is configured to use preshared-key authentication with the built-in playground enabled, the local server includes the preshared API key in the HTML response of the /playground endpoint. The /playground endpoint is enabled by default and does not require authentication. It is intended for local development and debugging and is not designed to be exposed to production environments. Only those who run OpenFGA with `--authn-method` preshared, with the playground enabled, and with the playground endpoint accessible beyond localhost or trusted networks are vulnerable. To remediate the issue, users should upgrade to OpenFGA v1.14.0, or disable the playground by running `./openfga run --playground-enabled=false.`
🎖@cveNotify
GitHub
Release v1.14.0 · openfga/openfga
Added
Added openfga_iter_query_duration_ms histogram metric to track storage iterator query latency across all storage backends, labeled by success. The metric is recorded in each backend's fe...
Added openfga_iter_query_duration_ms histogram metric to track storage iterator query latency across all storage backends, labeled by success. The metric is recorded in each backend's fe...
🚨 CVE-2026-6587
A security flaw has been discovered in vibrantlabsai RAGAS up to 0.4.3. The affected element is the function _try_process_local_file/_try_process_url of the file src/ragas/metrics/collections/multi_modal_faithfulness/util.py of the component Collections Module. Performing a manipulation of the argument retrieved_contexts results in server-side request forgery. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The security patch for CVE-2025-45691 was applied to a different module only. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
A security flaw has been discovered in vibrantlabsai RAGAS up to 0.4.3. The affected element is the function _try_process_local_file/_try_process_url of the file src/ragas/metrics/collections/multi_modal_faithfulness/util.py of the component Collections Module. Performing a manipulation of the argument retrieved_contexts results in server-side request forgery. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The security patch for CVE-2025-45691 was applied to a different module only. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
Adithyan's Blog
RAGAS v.0.2.14 Arbitrary File Read Vulnerability
Arbitrary File Read vulnerability in RAGAS impacts versions v0.2.3 to v0.2.14, allowing unauthorized file access via improperly handled URLs
🚨 CVE-2026-40895
follow-redirects is an open source, drop-in replacement for Node's `http` and `https` modules that automatically follows redirects. Prior to 1.16.0, when an HTTP request follows a cross-domain redirect (301/302/307/308), follow-redirects only strips authorization, proxy-authorization, and cookie headers (matched by regex at index.js). Any custom authentication header (e.g., X-API-Key, X-Auth-Token, Api-Key, Token) is forwarded verbatim to the redirect target. This vulnerability is fixed in 1.16.0.
🎖@cveNotify
follow-redirects is an open source, drop-in replacement for Node's `http` and `https` modules that automatically follows redirects. Prior to 1.16.0, when an HTTP request follows a cross-domain redirect (301/302/307/308), follow-redirects only strips authorization, proxy-authorization, and cookie headers (matched by regex at index.js). Any custom authentication header (e.g., X-API-Key, X-Auth-Token, Api-Key, Token) is forwarded verbatim to the redirect target. This vulnerability is fixed in 1.16.0.
🎖@cveNotify
GitHub
Custom Authentication Headers Leaked to Cross-Domain Redirect Targets
## Summary
When an HTTP request follows a cross-domain redirect (301/302/307/308), `follow-redirects` only strips `authorization`, `proxy-authorization`, and `cookie` headers (matched by regex a...
When an HTTP request follows a cross-domain redirect (301/302/307/308), `follow-redirects` only strips `authorization`, `proxy-authorization`, and `cookie` headers (matched by regex a...
🚨 CVE-2026-42033
Axios is a promise based HTTP client for the browser and Node.js. Prior to 1.15.1 and 0.31.1, when Object.prototype has been polluted by any co-dependency with keys that axios reads without a hasOwnProperty guard, an attacker can (a) silently intercept and modify every JSON response before the application sees it, or (b) fully hijack the underlying HTTP transport, gaining access to request credentials, headers, and body. The precondition is prototype pollution from a separate source in the same process. This vulnerability is fixed in 1.15.1 and 0.31.1.
🎖@cveNotify
Axios is a promise based HTTP client for the browser and Node.js. Prior to 1.15.1 and 0.31.1, when Object.prototype has been polluted by any co-dependency with keys that axios reads without a hasOwnProperty guard, an attacker can (a) silently intercept and modify every JSON response before the application sees it, or (b) fully hijack the underlying HTTP transport, gaining access to request credentials, headers, and body. The precondition is prototype pollution from a separate source in the same process. This vulnerability is fixed in 1.15.1 and 0.31.1.
🎖@cveNotify
GitHub
Prototype Pollution Gadgets in axios: Response Tampering, Data Exfiltration, and Request Hijacking
## Summary
When `Object.prototype` has been polluted by any co-dependency with keys that axios reads without a `hasOwnProperty` guard, an attacker can (a) silently intercept and modify every JSO...
When `Object.prototype` has been polluted by any co-dependency with keys that axios reads without a `hasOwnProperty` guard, an attacker can (a) silently intercept and modify every JSO...