🚨 CVE-2026-50812
A NULL pointer dereference in the SQLite Session Extension in SQLite 3.53.1 and SQLite trunk builds before check-in e807d4e3798efd53 allows an attacker who can supply a malformed changeset blob to cause a denial of service. The issue occurs when sqlite3changeset_apply_v3() applies a corrupt changeset and reaches sqlite3_value_type() with a NULL sqlite3_value pointer.

🎖@cveNotify

🚨 CVE-2026-50813
An issue in SQLite before Fossil check-in 869a51ae84df allows a local attacker to obtain sensitive information via the Session Extension changeset concat/changegroup merge path

🎖@cveNotify

🚨 CVE-2026-59937
pypdf is a free and open-source pure-python PDF library. Prior to 6.14.0, an attacker can craft a PDF with repeated malformed cross-reference streams that cause pypdf to spend long runtimes recovering broken cross-reference table entries. This issue is fixed in version 6.14.0.

🎖@cveNotify

🚨 CVE-2026-59938
pypdf is a free and open-source pure-python PDF library. Prior to 6.14.0, an attacker can craft a PDF with declared image size values that are much too large compared to the actual data, causing large memory usage in pypdf image parsing. This issue is fixed in version 6.14.0.

🎖@cveNotify

🚨 CVE-2026-38968
ntopng through 6.6 is vulnerable to Predictable Session Identifier which can lead to Session Hijacking. HTTP session identifiers in src/HTTPserver.cpp use weak time-seeded pseudo-randomness during session creation. As a result, fresh authenticated logins can receive deterministic or colliding session cookies under attacker-controlled timing.

🎖@cveNotify

🚨 CVE-2026-38971
ardupilot through Plane-4.6.3 was found to contain an out-of-bounds read issue in libraries/GCS_MAVLink/GCS_serial_control.cpp in GCS_MAVLINK::handle_serial_control().

🎖@cveNotify

🚨 CVE-2026-38972
Notepad3 through 6.25.822.1 contains a DLL search-order hijacking vulnerability in the About-dialog code path in src/Notepad3.c. The application calls LoadLibrary(L"MSFTEDIT.DLL") with a bare DLL name, which allows a local attacker to place a malicious MSFTEDIT.DLL in the application directory or another preferred DLL search location and achieve arbitrary code execution in the context of the user when the About dialog is opened.

🎖@cveNotify

🚨 CVE-2026-12413
An invalidly formatted IKEv2 fragment causes the Libreswan pluto daemon to crash and restart. Continued exploitation would cause a denial of service. The function reassemble_v2_incoming_fragments() would ignore unknown outer payloads but still store these in a fixed size array msg_digest.digest[PAYLIMIT]. An off-by-one error in the assertion PASSERT(logger, md->digest_roof < elemsof(md->digest)) causes the daemon to abort. No remote code execution is possible. Any configuration that allows IKEv2 connections that do not set fragmentation=no are vulnerable. IKEv1 is not affected.

🎖@cveNotify

🚨 CVE-2026-57100
Server-side request forgery (ssrf) in Microsoft Entra Provisioning Service (SyncFabric) allows an authorized attacker to elevate privileges over a network.

🎖@cveNotify

🚨 CVE-2026-47897
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Lucene.Net (Lucene.Net.Replicator library).

This issue affects Apache Lucene.Net.Replicator: from 4.8.0-beta00005 before 4.8.0-beta00018.

Users are recommended to upgrade to version 4.8.0-beta00018, which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-47898
Improper Restriction of XML External Entity Reference vulnerability in Apache Lucene.Net (Lucene.Net.Analysis.Common library).

This issue affects Apache Lucene.Net.Analysis.Common: from 4.8.0-beta00005 before 4.8.0-beta00018.

Users are recommended to upgrade to version 4.8.0-beta00018, which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-20074
A vulnerability in the Intermediate System-to-Intermediate System (IS-IS) multi-instance routing feature of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause the IS-IS process to restart unexpectedly.

This vulnerability is due to insufficient input validation of ingress IS-IS packets. An attacker could exploit this vulnerability by sending crafted IS-IS packets to an affected device after forming an adjacency. A successful exploit could allow the attacker to cause the IS-IS process to restart unexpectedly, resulting in a temporary loss of connectivity to advertised networks and a denial of service (DoS) condition.
Note: The IS-IS protocol is a routing protocol. To exploit this vulnerability, an attacker must be Layer 2-adjacent to the affected device and must have formed an adjacency.  

🎖@cveNotify

🚨 CVE-2026-20117
A vulnerability in the web-based management interface of Cisco Unified Contact Center Express (Unified CCX) could allow an unauthenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface.

This vulnerability exists because the web-based management interface of an affected system does not sufficiently validate user-supplied input. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.

🎖@cveNotify

🚨 CVE-2026-46286
In the Linux kernel, the following vulnerability has been resolved:

leds: qcom-lpg: Check for array overflow when selecting the high resolution

When selecting the high resolution values from the array, FIELD_GET() is
used to pull from a 3 bit register, yet the array being indexed has only
5 values in it. Odds are the hardware is sane, but just to be safe,
properly check before just overflowing and reading random data and then
setting up chip values based on that.

🎖@cveNotify

🚨 CVE-2026-46287
In the Linux kernel, the following vulnerability has been resolved:

net: txgbe: fix RTNL assertion warning when remove module

For the copper NIC with external PHY, the driver called
phylink_connect_phy() during probe and phylink_disconnect_phy() during
remove. It caused an RTNL assertion warning in phylink_disconnect_phy()
upon module remove.

To fix this, add rtnl_lock() and rtnl_unlock() around the
phylink_disconnect_phy() in remove function.

------------[ cut here ]------------
RTNL: assertion failed at drivers/net/phy/phylink.c (2351)
WARNING: drivers/net/phy/phylink.c:2351 at
phylink_disconnect_phy+0xd8/0xf0 [phylink], CPU#0: rmmod/4464
Modules linked in: ...
CPU: 0 UID: 0 PID: 4464 Comm: rmmod Kdump: loaded Not tainted 7.0.0-rc4+
Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING
PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024
RIP: 0010:phylink_disconnect_phy+0xe4/0xf0 [phylink]
Code: 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 f6 31 ff e9 3a 38 8f e7
48 8d 3d 48 87 e2 ff ba 2f 09 00 00 48 c7 c6 c1 22 24 c0 <67> 48 0f b9 3a
e9 34 ff ff ff 66 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffce7288363ac0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff89654b2a1a00 RCX: 0000000000000000
RDX: 000000000000092f RSI: ffffffffc02422c1 RDI: ffffffffc0239020
RBP: ffffce7288363ae8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8964c4022000
R13: ffff89654fce3028 R14: ffff89654ebb4000 R15: ffffffffc0226348
FS: 0000795e80d93780(0000) GS:ffff896c52857000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005b528b592000 CR3: 0000000170d0f000 CR4: 0000000000f50ef0
PKRU: 55555554
Call Trace:
<TASK>
txgbe_remove_phy+0xbb/0xd0 [txgbe]
txgbe_remove+0x4c/0xb0 [txgbe]
pci_device_remove+0x41/0xb0
device_remove+0x43/0x80
device_release_driver_internal+0x206/0x270
driver_detach+0x4a/0xa0
bus_remove_driver+0x83/0x120
driver_unregister+0x2f/0x60
pci_unregister_driver+0x40/0x90
txgbe_driver_exit+0x10/0x850 [txgbe]
__do_sys_delete_module.isra.0+0x1c3/0x2f0
__x64_sys_delete_module+0x12/0x20
x64_sys_call+0x20c3/0x2390
do_syscall_64+0x11c/0x1500
? srso_alias_return_thunk+0x5/0xfbef5
? do_syscall_64+0x15a/0x1500
? srso_alias_return_thunk+0x5/0xfbef5
? do_fault+0x312/0x580
? srso_alias_return_thunk+0x5/0xfbef5
? __handle_mm_fault+0x9d5/0x1040
? srso_alias_return_thunk+0x5/0xfbef5
? count_memcg_events+0x101/0x1d0
? srso_alias_return_thunk+0x5/0xfbef5
? handle_mm_fault+0x1e8/0x2f0
? srso_alias_return_thunk+0x5/0xfbef5
? do_user_addr_fault+0x2f8/0x820
? srso_alias_return_thunk+0x5/0xfbef5
? irqentry_exit+0xb2/0x600
? srso_alias_return_thunk+0x5/0xfbef5
? exc_page_fault+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e

🎖@cveNotify

🚨 CVE-2026-46288
In the Linux kernel, the following vulnerability has been resolved:

of: unittest: fix use-after-free in of_unittest_changeset()

The variable 'parent' is assigned the value of 'nchangeset' earlier in the
function, meaning both point to the same struct device_node. The call to
of_node_put(nchangeset) can decrement the reference count to zero and
free the node if there are no other holders. After that, the code still
uses 'parent' to check for the presence of a property and to read a
string property, leading to a use-after-free.

Fix this by moving the of_node_put() call after the last access to
'parent', avoiding the UAF.

🎖@cveNotify

🚨 CVE-2026-46289
In the Linux kernel, the following vulnerability has been resolved:

lib/scatterlist: fix length calculations in extract_kvec_to_sg

Patch series "Fix bugs in extract_iter_to_sg()", v3.

Fix bugs in the kvec and user variants of extract_iter_to_sg. This series
is growing due to useful remarks made by sashiko.dev.

The main bugs are:
- The length for an sglist entry when extracting from
a kvec can exceed the number of bytes in the page. This
is obviously not intended.
- When extracting a user buffer the sglist is temporarily
used as a scratch buffer for extracted page pointers.
If the sglist already contains some elements this scratch
buffer could overlap with existing entries in the sglist.

The series adds test cases to the kunit_iov_iter test that demonstrate all
of these bugs. Additionally, there is a memory leak fix for the test
itself.

The bugs were orignally introduced into kernel v6.3 where the function
lived in fs/netfs/iterator.c. It was later moved to lib/scatterlist.c in
v6.5. Thus the actual fix is only marked for backports to v6.5+.


This patch (of 5):

When extracting from a kvec to a scatterlist, do not cross page
boundaries. The required length was already calculated but not used as
intended.

Adjust the copied length if the loop runs out of sglist entries without
extracting everything.

While there, return immediately from extract_iter_to_sg if there are no
sglist entries at all.

A subsequent commit will add kunit test cases that demonstrate that the
patch is necessary.

🎖@cveNotify

🚨 CVE-2026-46290
In the Linux kernel, the following vulnerability has been resolved:

x86/efi: Fix graceful fault handling after FPU softirq changes

Since commit d02198550423 ("x86/fpu: Improve crypto performance by
making kernel-mode FPU reliably usable in softirqs"), kernel_fpu_begin()
calls fpregs_lock() which uses local_bh_disable() instead of the
previous preempt_disable(). This sets SOFTIRQ_OFFSET in preempt_count
during the entire EFI runtime service call, causing in_interrupt() to
return true in normal task context.

The graceful page fault handler efi_crash_gracefully_on_page_fault()
uses in_interrupt() to bail out for faults in real interrupt context.
With SOFTIRQ_OFFSET now set, the handler always bails out, leaving EFI
firmware page faults unhandled. This escalates to die() which also sees
in_interrupt() as true and calls panic("Fatal exception in interrupt"),
resulting in a hard system freeze. On systems with buggy firmware that
triggers page faults during EFI runtime calls (e.g., accessing unmapped
memory in GetTime()), this causes an unrecoverable hang instead of the
expected graceful EFI_ABORTED recovery.

Fix by replacing in_interrupt() with !in_task(). This preserves the
original intent of bailing for interrupts or NMI faults, while no longer
falsely triggering from the FPU code path's local_bh_disable().

[ardb: Sashiko spotted that using 'in_hardirq() || in_nmi()' leaves a
window where a softirq may be taken before fpregs_lock() is
called, but after efi_rts_work.efi_rts_id has been assigned,
and any page faults occurring in that window will then be
misidentified as having been caused by the firmware. Instead,
use !in_task(), which incorporates in_serving_softirq(). ]

🎖@cveNotify

🚨 CVE-2026-46293
In the Linux kernel, the following vulnerability has been resolved:

clk: microchip: mpfs-ccc: fix out of bounds access during output registration

UBSAN reported an out of bounds access during registration of the last
two outputs. This out of bounds access occurs because space is only
allocated in the hws array for two PLLs and the four output dividers
that each has, but the defined IDs contain two DLLS and their two
outputs each, which are not supported by the driver. The ID order is
PLLs -> DLLs -> PLL outputs -> DLL outputs. Decrement the PLL output IDs
by two while adding them to the array to avoid the problem.

🎖@cveNotify

🚨 CVE-2026-46294
In the Linux kernel, the following vulnerability has been resolved:

dm: fix a buffer overflow in ioctl processing

Tony Asleson (using Claude) found a buffer overflow in dm-ioctl in the
function retrieve_status:

1. The code in retrieve_status checks that the output string fits into
the output buffer and writes the output string there
2. Then, the code aligns the "outptr" variable to the next 8-byte
boundary:
outptr = align_ptr(outptr);
3. The alignment doesn't check overflow, so outptr could point past the
buffer end
4. The "for" loop is iterated again, it executes:
remaining = len - (outptr - outbuf);
5. If "outptr" points past "outbuf + len", the arithmetics wraps around
and the variable "remaining" contains unusually high number
6. With "remaining" being high, the code writes more data past the end of
the buffer

Luckily, this bug has no security implications because:
1. Only root can issue device mapper ioctls
2. The commonly used libraries that communicate with device mapper
(libdevmapper and devicemapper-rs) use buffer size that is aligned to
8 bytes - thus, "outptr = align_ptr(outptr)" can't overshoot the input
buffer and the bug can't happen accidentally

🎖@cveNotify

🚨 CVE-2026-46295
In the Linux kernel, the following vulnerability has been resolved:

KVM: x86: Do IRR scan in __kvm_apic_update_irr even if PIR is empty

Fall back to apic_find_highest_vector() when PID.ON is set but PIR
turns out to be empty, to correctly report the highest pending interrupt
from the existing IRR.

In a nested VM stress test, the following WARNING fires in
vmx_check_nested_events() when kvm_cpu_has_interrupt() reports a pending
interrupt but the subsequent kvm_apic_has_interrupt() (which invokes
vmx_sync_pir_to_irr() again) returns -1:

WARNING: CPU: 99 PID: 57767 at arch/x86/kvm/vmx/nested.c:4449 vmx_check_nested_events+0x6bf/0x6e0 [kvm_intel]
Call Trace:
kvm_check_and_inject_events
vcpu_enter_guest.constprop.0
vcpu_run
kvm_arch_vcpu_ioctl_run
kvm_vcpu_ioctl
__x64_sys_ioctl
do_syscall_64
entry_SYSCALL_64_after_hwframe

The root cause is a race between vmx_sync_pir_to_irr() on the target vCPU
and __vmx_deliver_posted_interrupt() on a sender vCPU. The sender
performs two individually-atomic operations that are not a single
transaction:

1. pi_test_and_set_pir(vector) -- sets the PIR bit
2. pi_test_and_set_on() -- sets PID.ON

The following interleaving triggers the bug:

Sender vCPU (IPI): Target vCPU (1st sync_pir_to_irr):
B1: set PIR[vector]
A1: pi_clear_on()
A2: pi_harvest_pir() -> sees B1 bit
A3: xchg() -> consumes bit, PIR=0
(1st sync returns correct max_irr)
B2: set PID.ON = 1

Target vCPU (2nd sync_pir_to_irr):
C1: pi_test_on() -> TRUE (from B2)
C2: pi_clear_on() -> ON=0
C3: pi_harvest_pir() -> PIR empty
C4: *max_irr = -1, early return
IRR NOT SCANNED

The interrupt is not lost (it resides in the IRR from the first sync and
is recovered on the next vcpu_enter_guest() iteration), but the incorrect
max_irr causes a spurious WARNING and a wasted L2 VM-Enter/VM-Exit cycle.

🎖@cveNotify