🚨 CVE-2023-42790
A stack-based buffer overflow vulnerability in Fortinet FortiOS 7.4.0 through 7.4.1, FortiOS 7.2.0 through 7.2.5, FortiOS 7.0.0 through 7.0.12, FortiOS 6.4.0 through 6.4.14, FortiOS 6.2.0 through 6.2.15, FortiProxy 7.4.0, FortiProxy 7.2.0 through 7.2.6, FortiProxy 7.0.0 through 7.0.12, FortiProxy 2.0.0 through 2.0.13, FortiSASE 23.2.b allows attacker to execute unauthorized code or commands via specially crafted HTTP requests.

🎖@cveNotify

🚨 CVE-2025-31366
An Improper Neutralization of Input During Web Page Generation vulnerability [CWE-79] vulnerability in Fortinet FortiOS 7.6.0 through 7.6.3, FortiOS 7.4.0 through 7.4.8, FortiOS 7.2 all versions, FortiOS 7.0 all versions, FortiOS 6.4 all versions, FortiProxy 7.6.0 through 7.6.3, FortiProxy 7.4 all versions, FortiProxy 7.2 all versions, FortiProxy 7.0 all versions, FortiSASE 25.2.a may allow an unauthenticated attacker to perform a reflected cross site scripting (XSS) via crafted HTTP requests.

🎖@cveNotify

🚨 CVE-2025-47890
An URL Redirection to Untrusted Site vulnerabilities [CWE-601] vulnerability in Fortinet FortiOS 7.6.0 through 7.6.3, FortiOS 7.4.0 through 7.4.8, FortiOS 7.2 all versions, FortiOS 7.0 all versions, FortiOS 6.4 all versions, FortiProxy 7.6.0 through 7.6.3, FortiProxy 7.4 all versions, FortiProxy 7.2 all versions, FortiProxy 7.0 all versions, FortiSASE 25.2.a may allow an unauthenticated attacker to perform an open redirect attack via crafted HTTP requests.

🎖@cveNotify

🚨 CVE-2025-61731
Building a malicious file with cmd/go can cause can cause a write to an attacker-controlled file with partial control of the file content. The "#cgo pkg-config:" directive in a Go source file provides command-line arguments to provide to the Go pkg-config command. An attacker can provide a "--log-file" argument to this directive, causing pkg-config to write to an attacker-controlled location.

🎖@cveNotify

🚨 CVE-2025-61732
A discrepancy between how Go and C/C++ comments were parsed allowed for code smuggling into the resulting cgo binary.

🎖@cveNotify

🚨 CVE-2025-69872
DiskCache (python-diskcache) through 5.6.3 uses Python pickle for serialization by default. An attacker with write access to the cache directory can achieve arbitrary code execution when a victim application reads from the cache.

🎖@cveNotify

🚨 CVE-2026-25679
url.Parse insufficiently validated the host/authority component and accepted some invalid URLs.

🎖@cveNotify

🚨 CVE-2026-27137
When verifying a certificate chain which contains a certificate containing multiple email address constraints which share common local portions but different domain portions, these constraints will not be properly applied, and only the last constraint will be considered.

🎖@cveNotify

🚨 CVE-2025-69196
FastMCP is the standard framework for building MCP applications. Prior to version 2.14.2, the server does not properly respect the resource parameter submitted by the client in the authorization and token request. Instead of issuing the token explicitly for the MCP server, the token is issued for the base_url passed to the OAuthProxy during initialization. This issue has been patched 2.14.2.

🎖@cveNotify

🚨 CVE-2026-33186
gRPC-Go is the Go language implementation of gRPC. Versions prior to 1.79.3 have an authorization bypass resulting from improper input validation of the HTTP/2 `:path` pseudo-header. The gRPC-Go server was too lenient in its routing logic, accepting requests where the `:path` omitted the mandatory leading slash (e.g., `Service/Method` instead of `/Service/Method`). While the server successfully routed these requests to the correct handler, authorization interceptors (including the official `grpc/authz` package) evaluated the raw, non-canonical path string. Consequently, "deny" rules defined using canonical paths (starting with `/`) failed to match the incoming request, allowing it to bypass the policy if a fallback "allow" rule was present. This affects gRPC-Go servers that use path-based authorization interceptors, such as the official RBAC implementation in `google.golang.org/grpc/authz` or custom interceptors relying on `info.FullMethod` or `grpc.Method(ctx)`; AND that have a security policy contains specific "deny" rules for canonical paths but allows other requests by default (a fallback "allow" rule). The vulnerability is exploitable by an attacker who can send raw HTTP/2 frames with malformed `:path` headers directly to the gRPC server. The fix in version 1.79.3 ensures that any request with a `:path` that does not start with a leading slash is immediately rejected with a `codes.Unimplemented` error, preventing it from reaching authorization interceptors or handlers with a non-canonical path string. While upgrading is the most secure and recommended path, users can mitigate the vulnerability using one of the following methods: Use a validating interceptor (recommended mitigation); infrastructure-level normalization; and/or policy hardening.

🎖@cveNotify

🚨 CVE-2026-27893
vLLM is an inference and serving engine for large language models (LLMs). Starting in version 0.10.1 and prior to version 0.18.0, two model implementation files hardcode `trust_remote_code=True` when loading sub-components, bypassing the user's explicit `--trust-remote-code=False` security opt-out. This enables remote code execution via malicious model repositories even when the user has explicitly disabled remote code trust. Version 0.18.0 patches the issue.

🎖@cveNotify

🚨 CVE-2026-23401
In the Linux kernel, the following vulnerability has been resolved:

KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE

When installing an emulated MMIO SPTE, do so *after* dropping/zapping the
existing SPTE (if it's shadow-present). While commit a54aa15c6bda3 was
right about it being impossible to convert a shadow-present SPTE to an
MMIO SPTE due to a _guest_ write, it failed to account for writes to guest
memory that are outside the scope of KVM.

E.g. if host userspace modifies a shadowed gPTE to switch from a memslot
to emulted MMIO and then the guest hits a relevant page fault, KVM will
install the MMIO SPTE without first zapping the shadow-present SPTE.

------------[ cut here ]------------
is_shadow_present_pte(*sptep)
WARNING: arch/x86/kvm/mmu/mmu.c:484 at mark_mmio_spte+0xb2/0xc0 [kvm], CPU#0: vmx_ept_stale_r/4292
Modules linked in: kvm_intel kvm irqbypass
CPU: 0 UID: 1000 PID: 4292 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:mark_mmio_spte+0xb2/0xc0 [kvm]
Call Trace:
<TASK>
mmu_set_spte+0x237/0x440 [kvm]
ept_page_fault+0x535/0x7f0 [kvm]
kvm_mmu_do_page_fault+0xee/0x1f0 [kvm]
kvm_mmu_page_fault+0x8d/0x620 [kvm]
vmx_handle_exit+0x18c/0x5a0 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0x730
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x47fa3f
</TASK>
---[ end trace 0000000000000000 ]---

🎖@cveNotify

🚨 CVE-2026-32871
FastMCP is a Pythonic way to build MCP servers and clients. Prior to version 3.2.0, the OpenAPIProvider in FastMCP exposes internal APIs to MCP clients by parsing OpenAPI specifications. The RequestDirector class is responsible for constructing HTTP requests to the backend service. A vulnerability exists in the _build_url() method. When an OpenAPI operation defines path parameters (e.g., /api/v1/users/{user_id}), the system directly substitutes parameter values into the URL template string without URL-encoding. Subsequently, urllib.parse.urljoin() resolves the final URL. Since urljoin() interprets ../ sequences as directory traversal, an attacker controlling a path parameter can perform path traversal attacks to escape the intended API prefix and access arbitrary backend endpoints. This results in authenticated SSRF, as requests are sent with the authorization headers configured in the MCP provider. This issue has been patched in version 3.2.0.

🎖@cveNotify

🚨 CVE-2026-31402
In the Linux kernel, the following vulnerability has been resolved:

nfsd: fix heap overflow in NFSv4.0 LOCK replay cache

The NFSv4.0 replay cache uses a fixed 112-byte inline buffer
(rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses.
This size was calculated based on OPEN responses and does not account
for LOCK denied responses, which include the conflicting lock owner as
a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT).

When a LOCK operation is denied due to a conflict with an existing lock
that has a large owner, nfsd4_encode_operation() copies the full encoded
response into the undersized replay buffer via read_bytes_from_xdr_buf()
with no bounds check. This results in a slab-out-of-bounds write of up
to 944 bytes past the end of the buffer, corrupting adjacent heap memory.

This can be triggered remotely by an unauthenticated attacker with two
cooperating NFSv4.0 clients: one sets a lock with a large owner string,
then the other requests a conflicting lock to provoke the denial.

We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full
opaque, but that would increase the size of every stateowner, when most
lockowners are not that large.

Instead, fix this by checking the encoded response length against
NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the
response is too large, set rp_buflen to 0 to skip caching the replay
payload. The status is still cached, and the client already received the
correct response on the original request.

🎖@cveNotify

🚨 CVE-2026-34986
Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. Prior to 4.1.4 and 3.0.5, decrypting a JSON Web Encryption (JWE) object will panic if the alg field indicates a key wrapping algorithm (one ending in KW, with the exception of A128GCMKW, A192GCMKW, and A256GCMKW) and the encrypted_key field is empty. The panic happens when cipher.KeyUnwrap() in key_wrap.go attempts to allocate a slice with a zero or negative length based on the length of the encrypted_key. This code path is reachable from ParseEncrypted() / ParseEncryptedJSON() / ParseEncryptedCompact() followed by Decrypt() on the resulting object. Note that the parse functions take a list of accepted key algorithms. If the accepted key algorithms do not include any key wrapping algorithms, parsing will fail and the application will be unaffected. This panic is also reachable by calling cipher.KeyUnwrap() directly with any ciphertext parameter less than 16 bytes long, but calling this function directly is less common. Panics can lead to denial of service. This vulnerability is fixed in 4.1.4 and 3.0.5.

🎖@cveNotify

🚨 CVE-2026-32280
During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 and users of crypto/tls.

🎖@cveNotify

🚨 CVE-2026-31419
In the Linux kernel, the following vulnerability has been resolved:

net: bonding: fix use-after-free in bond_xmit_broadcast()

bond_xmit_broadcast() reuses the original skb for the last slave
(determined by bond_is_last_slave()) and clones it for others.
Concurrent slave enslave/release can mutate the slave list during
RCU-protected iteration, changing which slave is "last" mid-loop.
This causes the original skb to be double-consumed (double-freed).

Replace the racy bond_is_last_slave() check with a simple index
comparison (i + 1 == slaves_count) against the pre-snapshot slave
count taken via READ_ONCE() before the loop. This preserves the
zero-copy optimization for the last slave while making the "last"
determination stable against concurrent list mutations.

The UAF can trigger the following crash:

==================================================================
BUG: KASAN: slab-use-after-free in skb_clone
Read of size 8 at addr ffff888100ef8d40 by task exploit/147

CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:597)
skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334)
bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593)
dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887)
__dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838)
ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136)
ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219)
ip6_output (net/ipv6/ip6_output.c:250)
ip6_send_skb (net/ipv6/ip6_output.c:1985)
udp_v6_send_skb (net/ipv6/udp.c:1442)
udpv6_sendmsg (net/ipv6/udp.c:1733)
__sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>

Allocated by task 147:

Freed by task 147:

The buggy address belongs to the object at ffff888100ef8c80
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 192 bytes inside of
freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60)

Memory state around the buggy address:
ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

🎖@cveNotify

🚨 CVE-2026-21742
A cleartext transmission of sensitive information vulnerability in Fortinet FortiSOAR PaaS 7.6.0 through 7.6.3, FortiSOAR PaaS 7.5.0 through 7.5.2, FortiSOAR PaaS 7.4 all versions, FortiSOAR PaaS 7.3 all versions, FortiSOAR on-premise 7.6.0 through 7.6.2, FortiSOAR on-premise 7.5.0 through 7.5.1, FortiSOAR on-premise 7.4 all versions, FortiSOAR on-premise 7.3 all versions may allow an authenticated attacker to view cleartext password in response for Secure Message Exchange and Radius queries, if configured

🎖@cveNotify

🚨 CVE-2026-22155
A cleartext transmission of sensitive information vulnerability in Fortinet FortiSOAR PaaS 7.6.0 through 7.6.3, FortiSOAR PaaS 7.5.0 through 7.5.2, FortiSOAR PaaS 7.4 all versions, FortiSOAR PaaS 7.3 all versions, FortiSOAR on-premise 7.6.0 through 7.6.2, FortiSOAR on-premise 7.5.0 through 7.5.1, FortiSOAR on-premise 7.4 all versions, FortiSOAR on-premise 7.3 all versions may allow attacker to information disclosure via <insert attack vector here>

🎖@cveNotify

🚨 CVE-2026-40938
Tekton Pipelines project provides k8s-style resources for declaring CI/CD-style pipelines. Starting in version 1.0.0 and prior to versions 1.0.2, 1.3.4, 1.6.2, 1.9.3, and 1.11.1, the git resolver's revision parameter is passed directly as a positional argument to git fetch without any validation that it does not begin with a - character. Because git parses flags from mixed positional arguments, an attacker can inject arbitrary git fetch flags such as --upload-pack=<binary>. Combined with the validateRepoURL function explicitly permitting URLs that begin with / (local filesystem paths), a tenant who can submit ResolutionRequest objects can chain these two behaviors to execute an arbitrary binary on the resolver pod. The tekton-pipelines-resolvers ServiceAccount holds cluster-wide get/list/watch on all Secrets, so code execution on the resolver pod enables full cluster-wide secret exfiltration. Versions 1.0.2, 1.3.4, 1.6.2, 1.9.3, and 1.11.1 fix the issue.

🎖@cveNotify

🚨 CVE-2026-6322
fast-uri normalize() decoded percent-encoded authority delimiters inside the host component and then re-emitted them as raw delimiters during serialization. A host that combined an allowed domain, an encoded at-sign, and a different domain was re-emitted with the at-sign as a raw userinfo separator, changing the URI's authority to the second domain. Applications that normalize untrusted URLs before host allowlist checks, redirect validation, or outbound request routing can be steered to a different authority than the input appeared to specify. Versions <= 3.1.1 are affected. Update to 3.1.2 or later.

🎖@cveNotify