🚨 CVE-2026-14489
The WHMCS Bridge plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the connect() function in all versions up to, and including, 6.9. This makes it possible for authenticated attackers, with Custom-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible.

🎖@cveNotify

🚨 CVE-2026-14495
The DoLogin Security plugin for WordPress is vulnerable to Authentication Bypass via Insufficient Randomness in all versions up to, and including, 4.3. The vulnerability exists because `dologin\s::rrand()` seeds the Mersenne Twister with `mt_srand((double) microtime() * 1000000)` — discarding the integer-seconds component of `microtime()` and constraining the seed to a range of approximately 10^6 values (~20 bits of entropy) — after which every character of the 32-character magic-link token is drawn sequentially with `mt_rand()`, making the entire token a deterministic function of that seed. Because `Pswdless::try_login()` is registered on the unauthenticated `init` hook, resolves the target account by the auto-increment numeric ID embedded in the `?dologin=<id>.<hash>` parameter, performs the hash comparison using a non-constant-time `!=` operator, and then calls `wp_set_auth_cookie()` directly — never passing through `wp_authenticate()` and therefore never triggering the plugin's own `Auth::_has_login_err()` lockout — an unauthenticated attacker can brute-force the ~10^6-candidate seed space to reconstruct an active passwordless login token and authenticate as any targeted user, including administrators, without a password. Exploitation requires that a valid, unexpired passwordless login link (active for up to 7 days) exists for the target account at the time of the attack, and that the numeric link ID is known or guessable from the auto-increment primary key.

🎖@cveNotify

🚨 CVE-2026-14500
The Bulk Order Update for WooCommerce plugin for WordPress is vulnerable to Arbitrary File Read in versions up to, and including, 1.6. This is due to the bouw_fetch_csv_data() AJAX handler being registered on the wp_ajax_nopriv_ hook with no capability or nonce check, and passing the attacker-supplied csv_url POST parameter — filtered only by esc_url_raw() (which leaves absolute filesystem paths intact) and validate_file() (which only rejects '..' traversal patterns) — directly into fopen()/fgetcsv() and reflecting the first parsed line in the JSON response. This makes it possible for unauthenticated attackers to read the first line of arbitrary files on the server (such as /etc/passwd) and to use the handler as a file-existence oracle.

🎖@cveNotify

🚨 CVE-2026-56437
Uncontrolled search path element issue exists in Pupsman versions prior to 3.9.0. If a crafted DLL file is placed in the same folder as the affected installer and the installer is executed, arbitrary code may be executed with SYSTEM privilege.

🎖@cveNotify

🚨 CVE-2026-57895
Incorrect default permissions issue exists in Pupsman versions prior to 3.9.0. An attacker can place a malicious executable in the installation folder, which results in arbitrary code execution with SYSTEM privilege

🎖@cveNotify

🚨 CVE-2026-9700
The Eventer plugin for WordPress is vulnerable to time-based SQL Injection via the ‘code’ parameter in all versions up to, and including, 4.4.2 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

🎖@cveNotify

🚨 CVE-2026-9731
The Wp Js Detect plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.0.9. This is due to missing or incorrect nonce validation on the plugin_settings function. This makes it possible for unauthenticated attackers to update the plugin's notification text and CSS settings (wp_non_js_notification_text and wp_non_js_notification_css), injecting arbitrary content that is echoed unescaped on the frontend via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.

🎖@cveNotify

🚨 CVE-2026-11837
A local privilege escalation vulnerability was found in the ansible.posix authorized_key module. The module's keyfile() function uses os.chown() instead of os.lchown() and opens files without O_NOFOLLOW when managing SSH authorized keys. An unprivileged local user can pre-stage symbolic links in their ~/.ssh directory to redirect file ownership changes to arbitrary system paths when an operator runs the authorized_key task as root, leading to local privilege escalation.

🎖@cveNotify

🚨 CVE-2026-41049
Incorrect caching of authentication between different users of the  qSnapper dbus service before version 1.3.3 allowed any local attacker to use dbus functions after a privileged users has authenticated for them.

🎖@cveNotify

🚨 CVE-2026-12378
The Appointment Booking Calendar Plugin and Scheduling Plugin WordPress plugin through 1.1.28 does not validate data before passing it to a PHP deserialization function, allowing unauthenticated attackers to inject arbitrary PHP objects; where a suitable gadget chain is present on the site this can be leveraged to achieve remote code execution.

🎖@cveNotify

🚨 CVE-2026-9695
An Improper Authentication vulnerability affecting DELMIA Apriso from Release 2020 through Release 2026 could allow an attacker to gain privileged access to the server.

🎖@cveNotify

🚨 CVE-2026-11774
An integer overflow flaw was found in the SASL I/O layer of 389 Directory Server (389-ds-base). In sasl_io_start_packet(), adding sizeof(uint32_t) to a crafted SASL packet length prefix of 0xFFFFFFFC causes unsigned wraparound to zero, bypassing the nsslapd-maxsasliosize limit and leading to a heap buffer overflow of up to approximately 2 megabytes of attacker-controlled data. After a successful SASL bind with integrity protection (SSF > 0), a remote attacker can cause a Denial of Service (DoS) or achieve Remote Code Execution (RCE). In FreeIPA and Red Hat Identity Management deployments, any domain user with a valid Kerberos ticket, enrolled host, or service account can trigger this vulnerability over the network. This flaw is independent of CVE-2025-14905, which patched schema.c only and did not modify sasl_io.c.

🎖@cveNotify

🚨 CVE-2026-11610
A heap buffer overflow flaw was found in the SASL I/O layer of 389 Directory Server
(389-ds-base). After a successful SASL bind with integrity protection (SSF > 0),
an authenticated attacker can send a specially crafted oversized LDAP UNBIND packet
that is copied into a 512-byte heap receive buffer without a bounds check in
sasl_io_recv() in sasl_io.c. This allows up to approximately 2 megabytes of
attacker-controlled data to overflow the buffer, causing a denial of service (server
crash). In FreeIPA and Red Hat Identity Management deployments, any domain user with
a valid Kerberos ticket, any enrolled host, or any service account can trigger this
vulnerability over the network after authenticating via GSSAPI.
The vulnerable code path has existed since approximately 2013 (389-ds-base 1.3.2) and
was not addressed by the CVE-2025-14905 fix, which patched a separate heap overflow
in schema.c only.

🎖@cveNotify

🚨 CVE-2025-6297
It was discovered that dpkg-deb does not properly sanitize directory permissions when extracting a control member into a temporary directory, which is
documented as being a safe operation even on untrusted data. This may result in leaving temporary files behind on cleanup. Given automated and repeated execution of dpkg-deb commands on
adversarial .deb packages or with well compressible files, placed
inside a directory with permissions not allowing removal by a non-root
user, this can end up in a DoS scenario due to causing disk quota
exhaustion or disk full conditions.

🎖@cveNotify

🚨 CVE-2026-11837
A local privilege escalation vulnerability was found in the ansible.posix authorized_key module. The module's keyfile() function uses os.chown() instead of os.lchown() and opens files without O_NOFOLLOW when managing SSH authorized keys. An unprivileged local user can pre-stage symbolic links in their ~/.ssh directory to redirect file ownership changes to arbitrary system paths when an operator runs the authorized_key task as root, leading to local privilege escalation.

🎖@cveNotify

🚨 CVE-2026-56208
A heap buffer overflow vulnerability was found in libaom, the reference AV1 codec implementation. A flaw in the AV1 encoder's Look-Ahead Processing (LAP) mode causes the first-pass stats ring buffer wrap-around guard to be bypassed when g_lag_in_frames is set to 1 or higher. This results in a 232-byte out-of-bounds write on every encoded frame after the second, corrupting adjacent heap objects. An attacker who can influence encoder configuration in a transcoding service or WebRTC session could exploit this to cause a denial of service (process crash) or potentially achieve code execution.

🎖@cveNotify

🚨 CVE-2026-56209
An arbitrary address write vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows an attacker to inject an arbitrary pointer into the cyclic refresh map field via crafted image pixel values. The encoder then writes approximately 1,200 bytes at the attacker-controlled address. This is fully deterministic and does not require a separate information leak. An attacker who can supply frames to a network-facing libaom encoder with SVC enabled could exploit this for denial of service or potential code execution.

🎖@cveNotify

🚨 CVE-2026-56210
A heap-buffer-overflow read vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows setting a spatial_layer_id exceeding the configured number of layers. This causes an out-of-bounds heap read of approximately 40,728 bytes when computing a layer context array index. An attacker who can influence SVC encoder parameters in a network-facing service could exploit this for information disclosure (heap content leak) or denial of service (segmentation fault from hitting unmapped memory).

🎖@cveNotify

🚨 CVE-2026-56211
A remote code execution vulnerability was found in libaom, the reference AV1 codec implementation. Insufficient bounds validation in the AV1 encoder's SVC (Scalable Video Coding) layer ID control allows an attacker to supply crafted video frame pixels that overlap with internal encoder layer context structures. In fork-based video processing services, an attacker can use this to hijack the cyclic refresh map pointer, brute-force the process base address via a crash oracle, and redirect control flow to achieve arbitrary command execution. Exploitation requires the target service to use libaom with SVC encoding enabled and accept attacker-supplied video frames.

🎖@cveNotify

🚨 CVE-2026-9165
A flaw was found in Red Hat Advanced Cluster Security for Kubernetes (RHACS). Central does not limit the depth of GraphQL queries served on the authenticated GraphQL API. An authenticated user with a valid API token can send deeply nested queries that cause excessive resource consumption in Central, resulting in a denial of service for the management plane.

🎖@cveNotify

🚨 CVE-2026-13126
The embedded JavaScript in the PDF deleted the pages, making the object invalid. The application attempted to perform a write operation on the invalid pop-up annotations, resulting in the program crashing.

🎖@cveNotify