🚨 CVE-2026-49097
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel IRC component.
The camel-irc producer chooses the destination of an outgoing IRC message from the irc.sendTo Exchange header (the constant IrcConstants.IRC_SEND_TO, value irc.sendTo); when that header is present it overrides the channel list configured on the endpoint, and the message is sent only to the specified destination. This and the component's other control headers (irc.target, irc.messageType, irc.user.*, irc.num, irc.value) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into an irc: producer, any HTTP client could therefore set the irc.sendTo header and redirect a message that the route intended for a configured channel to an arbitrary IRC channel or user - exfiltrating the message content to an attacker-chosen nickname, leaking it into a public channel, or delivering messages that appear to come from the bot. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set IRC headers via the raw header names must use the CamelIrc* names (for example CamelIrcSendTo) instead of the old irc.* values. For deployments that cannot upgrade immediately, strip the irc.* headers from any untrusted ingress before the irc: producer (for example removeHeaders('irc.*') at the start of the route), and set the IRC destination from a trusted source.
🎖@cveNotify
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel IRC component.
The camel-irc producer chooses the destination of an outgoing IRC message from the irc.sendTo Exchange header (the constant IrcConstants.IRC_SEND_TO, value irc.sendTo); when that header is present it overrides the channel list configured on the endpoint, and the message is sent only to the specified destination. This and the component's other control headers (irc.target, irc.messageType, irc.user.*, irc.num, irc.value) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into an irc: producer, any HTTP client could therefore set the irc.sendTo header and redirect a message that the route intended for a configured channel to an arbitrary IRC channel or user - exfiltrating the message content to an attacker-chosen nickname, leaking it into a public channel, or delivering messages that appear to come from the bot. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set IRC headers via the raw header names must use the CamelIrc* names (for example CamelIrcSendTo) instead of the old irc.* values. For deployments that cannot upgrade immediately, strip the irc.* headers from any untrusted ingress before the irc: producer (for example removeHeaders('irc.*') at the start of the route), and set the IRC destination from a trusted source.
🎖@cveNotify
Apache Camel
Apache Camel Security Advisory - CVE-2026-49097
The camel-irc producer chooses the destination of an outgoing IRC message from the irc.sendTo Exchange header (the constant IrcConstants.IRC_SEND_TO, value irc.sendTo); when that header is present it overrides the channel list configured on the endpoint,…
🚨 CVE-2026-49098
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel Kafka Component.
The camel-kafka producer can override its configured target topic at runtime from the kafka.OVERRIDE_TOPIC Exchange header: KafkaProducer.evaluateTopic() returns the header value in preference to the topic configured on the endpoint. The control-header constants in KafkaConstants (for example OVERRIDE_TOPIC = kafka.OVERRIDE_TOPIC, OVERRIDE_TIMESTAMP = kafka.OVERRIDE_TIMESTAMP, PARTITION_KEY = kafka.PARTITION_KEY) used plain, non-Camel-prefixed values. camel-kafka's own KafkaHeaderFilterStrategy does filter the kafka.* namespace, but only on the Kafka-to-Exchange serialization boundary (reading Kafka record headers into the Exchange, and writing Exchange headers into a Kafka record); it does not apply to headers that arrive from an upstream consumer in a multi-component route. The upstream HTTP consumer uses HttpHeaderFilterStrategy, which blocks only the Camel / camel namespace, so a kafka.* header passes through unfiltered. As a result, in a route that bridges an HTTP consumer (for example platform-http) into a kafka: producer, any HTTP client could set the kafka.OVERRIDE_TOPIC header and cause the message to be published to an arbitrary Kafka topic instead of the configured one - redirecting it to a sensitive internal topic, or injecting attacker-crafted messages into a topic consumed by a critical downstream service. The related kafka.OVERRIDE_TIMESTAMP and kafka.PARTITION_KEY headers could likewise be injected to backdate messages or target specific partitions. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set or read Kafka headers via the raw header names must use the CamelKafka* names (for example CamelKafkaOverrideTopic and CamelKafkaTopic) instead of the old kafka.* values. For deployments that cannot upgrade immediately, strip the kafka.* headers from any untrusted ingress before the kafka: producer (for example removeHeaders('kafka.*') at the start of the route), and set the target topic from a trusted source.
🎖@cveNotify
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel Kafka Component.
The camel-kafka producer can override its configured target topic at runtime from the kafka.OVERRIDE_TOPIC Exchange header: KafkaProducer.evaluateTopic() returns the header value in preference to the topic configured on the endpoint. The control-header constants in KafkaConstants (for example OVERRIDE_TOPIC = kafka.OVERRIDE_TOPIC, OVERRIDE_TIMESTAMP = kafka.OVERRIDE_TIMESTAMP, PARTITION_KEY = kafka.PARTITION_KEY) used plain, non-Camel-prefixed values. camel-kafka's own KafkaHeaderFilterStrategy does filter the kafka.* namespace, but only on the Kafka-to-Exchange serialization boundary (reading Kafka record headers into the Exchange, and writing Exchange headers into a Kafka record); it does not apply to headers that arrive from an upstream consumer in a multi-component route. The upstream HTTP consumer uses HttpHeaderFilterStrategy, which blocks only the Camel / camel namespace, so a kafka.* header passes through unfiltered. As a result, in a route that bridges an HTTP consumer (for example platform-http) into a kafka: producer, any HTTP client could set the kafka.OVERRIDE_TOPIC header and cause the message to be published to an arbitrary Kafka topic instead of the configured one - redirecting it to a sensitive internal topic, or injecting attacker-crafted messages into a topic consumed by a critical downstream service. The related kafka.OVERRIDE_TIMESTAMP and kafka.PARTITION_KEY headers could likewise be injected to backdate messages or target specific partitions. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set or read Kafka headers via the raw header names must use the CamelKafka* names (for example CamelKafkaOverrideTopic and CamelKafkaTopic) instead of the old kafka.* values. For deployments that cannot upgrade immediately, strip the kafka.* headers from any untrusted ingress before the kafka: producer (for example removeHeaders('kafka.*') at the start of the route), and set the target topic from a trusted source.
🎖@cveNotify
Apache Camel
Apache Camel Security Advisory - CVE-2026-49098
The camel-kafka producer can override its configured target topic at runtime from the kafka.OVERRIDE_TOPIC Exchange header: KafkaProducer.evaluateTopic() returns the header value in preference to the topic configured on the endpoint. The control-header constants…
🚨 CVE-2026-49099
Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Salesforce Component.
The camel-salesforce producer resolves its operation parameters - the SOQL query, the SOSL search, the target SObject name and id, the Apex REST URL and method, and the Apex query parameters - from Exchange message headers, reading the header in preference to the value configured on the endpoint (AbstractSalesforceProcessor.getParameter() reads the header first and uses the endpoint configuration only as a fallback). The control-header constants in SalesforceEndpointConfig (for example SOBJECT_QUERY = sObjectQuery, SOBJECT_SEARCH = sObjectSearch, SOBJECT_NAME = sObjectName, SOBJECT_ID = sObjectId, APEX_URL = apexUrl, APEX_METHOD = apexMethod, and the apexQueryParam. prefix) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a salesforce: producer, any HTTP client could therefore set these headers and override what the route intended - supplying its own SOQL query or SOSL search to read data from any SObject the connected Salesforce user can access, overriding the target SObject name and id for CRUD operations, or redirecting an Apex REST call to a different endpoint and HTTP method (including destructive methods) with injected query parameters. All such operations run with the full permissions of the Salesforce connected (integration) user, which is typically broad. No credentials are required from the attacker when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Salesforce operation parameters via the raw header names must use the CamelSalesforce* names (for example CamelSalesforceSObjectQuery and CamelSalesforceApexUrl) instead of the old sObject* / apex* values; the endpoint-option spelling is unchanged. For deployments that cannot upgrade immediately, strip the Salesforce control headers from any untrusted ingress before the salesforce: producer (for example removeHeaders('sObject*') and removeHeaders('apex*') at the start of the route), and set the query, SObject and Apex parameters from a trusted source.
🎖@cveNotify
Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Salesforce Component.
The camel-salesforce producer resolves its operation parameters - the SOQL query, the SOSL search, the target SObject name and id, the Apex REST URL and method, and the Apex query parameters - from Exchange message headers, reading the header in preference to the value configured on the endpoint (AbstractSalesforceProcessor.getParameter() reads the header first and uses the endpoint configuration only as a fallback). The control-header constants in SalesforceEndpointConfig (for example SOBJECT_QUERY = sObjectQuery, SOBJECT_SEARCH = sObjectSearch, SOBJECT_NAME = sObjectName, SOBJECT_ID = sObjectId, APEX_URL = apexUrl, APEX_METHOD = apexMethod, and the apexQueryParam. prefix) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a salesforce: producer, any HTTP client could therefore set these headers and override what the route intended - supplying its own SOQL query or SOSL search to read data from any SObject the connected Salesforce user can access, overriding the target SObject name and id for CRUD operations, or redirecting an Apex REST call to a different endpoint and HTTP method (including destructive methods) with injected query parameters. All such operations run with the full permissions of the Salesforce connected (integration) user, which is typically broad. No credentials are required from the attacker when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Salesforce operation parameters via the raw header names must use the CamelSalesforce* names (for example CamelSalesforceSObjectQuery and CamelSalesforceApexUrl) instead of the old sObject* / apex* values; the endpoint-option spelling is unchanged. For deployments that cannot upgrade immediately, strip the Salesforce control headers from any untrusted ingress before the salesforce: producer (for example removeHeaders('sObject*') and removeHeaders('apex*') at the start of the route), and set the query, SObject and Apex parameters from a trusted source.
🎖@cveNotify
Apache Camel
Apache Camel Security Advisory - CVE-2026-49099
The camel-salesforce producer resolves its operation parameters - the SOQL query, the SOSL search, the target SObject name and id, the Apex REST URL and method, and the Apex query parameters - from Exchange message headers, reading the header in preference…
🚨 CVE-2026-9182
ArcGIS Server contains an unrestricted file upload vulnerability. An unauthenticated attacker could exploit this issue by uploading a crafted file to the affected endpoint. Successful exploitation could allow arbitrary file upload.
🎖@cveNotify
ArcGIS Server contains an unrestricted file upload vulnerability. An unauthenticated attacker could exploit this issue by uploading a crafted file to the affected endpoint. Successful exploitation could allow arbitrary file upload.
🎖@cveNotify
ArcGIS Blog
May 2026 ArcGIS Security Bulletin
🚨 CVE-2026-50133
Hugo is a static site generator. Prior to 0.162.0, Hugo accepts content files in several markup formats. Files mapped to the text/html media type (typically .html files under /content, or pages produced by a content adapter that sets content.mediaType = "text/html") had their body emitted verbatim into the rendered page. A site that ingests HTML content from an untrusted source could therefore be served stored cross-site scripting. This vulnerability is fixed in 0.162.0.
🎖@cveNotify
Hugo is a static site generator. Prior to 0.162.0, Hugo accepts content files in several markup formats. Files mapped to the text/html media type (typically .html files under /content, or pages produced by a content adapter that sets content.mediaType = "text/html") had their body emitted verbatim into the rendered page. A site that ingests HTML content from an untrusted source could therefore be served stored cross-site scripting. This vulnerability is fixed in 0.162.0.
🎖@cveNotify
GitHub
Disallow HTML content by default · gohugoio/hugo@e41a064
For security reasons. Enable in security config, e.g.:
```toml
[security]
allowContent = ['.*']
```
```toml
[security]
allowContent = ['.*']
```
🚨 CVE-2026-50134
Hugo is a static site generator. From 0.91.0 until 0.162.0, resources.GetRemote enforces security.http.urls on the URL it is called with, but it did not re-validate intermediate URLs on HTTP 3xx redirects. An allowed server (or an attacker controlling its DNS or response) could therefore redirect the request to a host that the policy was meant to forbid and Hugo would fetch from the redirected target. The same bypass also lifted any host-shape restriction the operator had put in place. This vulnerability is fixed in 0.162.0.
🎖@cveNotify
Hugo is a static site generator. From 0.91.0 until 0.162.0, resources.GetRemote enforces security.http.urls on the URL it is called with, but it did not re-validate intermediate URLs on HTTP 3xx redirects. An allowed server (or an attacker controlling its DNS or response) could therefore redirect the request to a host that the policy was meant to forbid and Hugo would fetch from the redirected target. The same bypass also lifted any host-shape restriction the operator had put in place. This vulnerability is fixed in 0.162.0.
🎖@cveNotify
GitHub
security: Validate redirects against security.http.urls · gohugoio/hugo@86fbb0f
A server allowed by security.http.urls could redirect resources.GetRemote
to a host that is not. Re-run the check on each hop via CheckRedirect.
Fixes #14871
to a host that is not. Re-run the check on each hop via CheckRedirect.
Fixes #14871
🚨 CVE-2026-58402
Hugo is a static site generator. From 0.60.0 until 0.163.3, Hugo's default code-block renderer wrote the Markdown code-fence language or info-string into the code class="language-…" data-lang="…" wrapper without HTML escaping. A fence info-string containing a quote and a script payload breaks out of the attribute and injects a live script element. This issue is fixed in 0.163.3.
🎖@cveNotify
Hugo is a static site generator. From 0.60.0 until 0.163.3, Hugo's default code-block renderer wrote the Markdown code-fence language or info-string into the code class="language-…" data-lang="…" wrapper without HTML escaping. A fence info-string containing a quote and a script payload breaks out of the attribute and injects a live script element. This issue is fixed in 0.163.3.
🎖@cveNotify
GitHub
markup/highlight: Escape lang in default code block rendering · gohugoio/hugo@ce1a7e0
The world’s fastest framework for building websites. - markup/highlight: Escape lang in default code block rendering · gohugoio/hugo@ce1a7e0
🚨 CVE-2026-58403
Hugo is a static site generator. From v0.123.0 through v0.163.0, Hugo's virtual filesystem is designed so that files under a mount cannot reach outside the mount tree, but a regression caused RootMappingFs.statRoot to call Stat, which follows symlinks, instead of Lstat, so a direct os.ReadFile "somefile" where somefile was a symlink pointing outside the mount would return the target's contents. This effectively let a symlink planted inside a theme or local mount read arbitrary files reachable to the user running hugo. This issue is fixed in v0.163.1.
🎖@cveNotify
Hugo is a static site generator. From v0.123.0 through v0.163.0, Hugo's virtual filesystem is designed so that files under a mount cannot reach outside the mount tree, but a regression caused RootMappingFs.statRoot to call Stat, which follows symlinks, instead of Lstat, so a direct os.ReadFile "somefile" where somefile was a symlink pointing outside the mount would return the target's contents. This effectively let a symlink planted inside a theme or local mount read arbitrary files reachable to the user running hugo. This issue is fixed in v0.163.1.
🎖@cveNotify
GitHub
Drop symlinks in os.ReadDir, os.ReadFile, os.Stat and os.FileExists · gohugoio/hugo@cf9c8f9
Fixes #15019
🚨 CVE-2026-58404
Hugo is a static site generator. From v0.162.0 through v0.163.0, the default security.http.urls policy denies requests to loopback, internal, and cloud-metadata IPv4 literals, but the deny rule only matched dotted-decimal notation, so alternate IPv4 encodings of the same addresses, including integer, hex, or octal, passed the policy. When a template passes an untrusted or data-derived URL to resources.GetRemote and the host platform uses the cgo system resolver, these encodings resolve to the blocked address, allowing build-time server-side requests to loopback and internal services, including the cloud-metadata endpoint in hosted or CI builds; the same check is reused on redirects, so the gap also applies to each redirect hop. This issue is fixed in v0.163.1.
🎖@cveNotify
Hugo is a static site generator. From v0.162.0 through v0.163.0, the default security.http.urls policy denies requests to loopback, internal, and cloud-metadata IPv4 literals, but the deny rule only matched dotted-decimal notation, so alternate IPv4 encodings of the same addresses, including integer, hex, or octal, passed the policy. When a template passes an untrusted or data-derived URL to resources.GetRemote and the host platform uses the cgo system resolver, these encodings resolve to the blocked address, allowing build-time server-side requests to loopback and internal services, including the cloud-metadata endpoint in hosted or CI builds; the same check is reused on redirects, so the gap also applies to each redirect hop. This issue is fixed in v0.163.1.
🎖@cveNotify
GitHub
security: Normalize integer IPv4 host encodings in http.urls check · gohugoio/hugo@a00b5c7
Canonicalize integer/hex/octal IPv4 hosts to dotted-decimal before
applying the security.http.urls policy so all encodings of an address
are treated alike.
Co-Authored-By: Claude Opus 4.8 (1M cont...
applying the security.http.urls policy so all encodings of an address
are treated alike.
Co-Authored-By: Claude Opus 4.8 (1M cont...
🚨 CVE-2026-54763
Traefik is an HTTP reverse proxy and load balancer. Prior to v2.11.51, v3.6.22, and v3.7.6, Traefik's BasicAuth, DigestAuth, and ForwardAuth middlewares strip canonical-cased spoofed identity headers before writing Traefik's own value, but do not account for underscore-variant header names, which many backends normalize identically to dashed forms. An attacker able to reach a protected route can inject an underscore-variant header that survives Traefik's stripping and reaches the backend alongside, or on the unauthenticated ForwardAuth authResponseHeaders path instead of, the value Traefik intended to set, spoofing identity or authorization context. This issue is fixed in versions v2.11.51, v3.6.22, and v3.7.6.
🎖@cveNotify
Traefik is an HTTP reverse proxy and load balancer. Prior to v2.11.51, v3.6.22, and v3.7.6, Traefik's BasicAuth, DigestAuth, and ForwardAuth middlewares strip canonical-cased spoofed identity headers before writing Traefik's own value, but do not account for underscore-variant header names, which many backends normalize identically to dashed forms. An attacker able to reach a protected route can inject an underscore-variant header that survives Traefik's stripping and reaches the backend alongside, or on the unauthenticated ForwardAuth authResponseHeaders path instead of, the value Traefik intended to set, spoofing identity or authorization context. This issue is fixed in versions v2.11.51, v3.6.22, and v3.7.6.
🎖@cveNotify
GitHub
Add an option to remove request headers with underscores · traefik/traefik@108a526
The Cloud Native Application Proxy. Contribute to traefik/traefik development by creating an account on GitHub.
🚨 CVE-2026-54764
Traefik is an HTTP reverse proxy and load balancer. Prior to v2.11.51, v3.6.22, and v3.7.6, Traefik's ForwardAuth middleware, even when configured with trustForwardHeader: false, derives the X-Forwarded-Port header sent to the authentication service from the original incoming request instead of the sanitized forwarded request. As a result, an unauthenticated remote attacker can inject an X-Forwarded-Proto: https header over a plain HTTP connection and cause Traefik to forward X-Forwarded-Port: 443 to the authentication service, bypassing port-based authorization checks. This issue is fixed in versions v2.11.51, v3.6.22, and v3.7.6.
🎖@cveNotify
Traefik is an HTTP reverse proxy and load balancer. Prior to v2.11.51, v3.6.22, and v3.7.6, Traefik's ForwardAuth middleware, even when configured with trustForwardHeader: false, derives the X-Forwarded-Port header sent to the authentication service from the original incoming request instead of the sanitized forwarded request. As a result, an unauthenticated remote attacker can inject an X-Forwarded-Proto: https header over a plain HTTP connection and cause Traefik to forward X-Forwarded-Port: 443 to the authentication service, bypassing port-based authorization checks. This issue is fixed in versions v2.11.51, v3.6.22, and v3.7.6.
🎖@cveNotify
GitHub
fix x-forwarded-port in forward-auth · traefik/traefik@7ae92d8
The Cloud Native Application Proxy. Contribute to traefik/traefik development by creating an account on GitHub.
🚨 CVE-2026-54765
Traefik is an open source HTTP reverse proxy and load balancer. From v3.7.0 prior to v3.7.6, Traefik's Kubernetes Gateway API provider may resolve two accepted HTTPRoutes that target the same backend Service:port but configure different backendRef filters to the same child service and apply only one route's filter set to all requests reaching that backend. In Gateway deployments where backendRef filters set security-sensitive headers, such as tenant identity, authorization context, or values the backend trusts, an attacker who can create an accepted HTTPRoute sharing the same backend Service:port may cause their route's filter context to be applied to another route's requests, potentially crossing namespace boundaries when a ReferenceGrant permits cross-namespace targeting. This issue is fixed in version v3.7.6.
🎖@cveNotify
Traefik is an open source HTTP reverse proxy and load balancer. From v3.7.0 prior to v3.7.6, Traefik's Kubernetes Gateway API provider may resolve two accepted HTTPRoutes that target the same backend Service:port but configure different backendRef filters to the same child service and apply only one route's filter set to all requests reaching that backend. In Gateway deployments where backendRef filters set security-sensitive headers, such as tenant identity, authorization context, or values the backend trusts, an attacker who can create an accepted HTTPRoute sharing the same backend Service:port may cause their route's filter context to be applied to another route's requests, potentially crossing namespace boundaries when a ReferenceGrant permits cross-namespace targeting. This issue is fixed in version v3.7.6.
🎖@cveNotify
GitHub
Avoid collisions for Gateway API services names · traefik/traefik@8aada7a
The Cloud Native Application Proxy. Contribute to traefik/traefik development by creating an account on GitHub.
🚨 CVE-2026-3861
LINE client for iOS versions prior to 26.3.0 contains a vulnerability in the in-app browser where opening a crafted web page can repeatedly trigger OS-level dialogs due to insufficient safeguards when handling arbitrary URL schemes, potentially causing the iOS device to become temporarily inoperable.
🎖@cveNotify
LINE client for iOS versions prior to 26.3.0 contains a vulnerability in the in-app browser where opening a crafted web page can repeatedly trigger OS-level dialogs due to insufficient safeguards when handling arbitrary URL schemes, potentially causing the iOS device to become temporarily inoperable.
🎖@cveNotify
🚨 CVE-2026-41082
In OCaml opam before 2.5.1, a .install field containing a destination filepath can use ../ to reach a parent directory.
🎖@cveNotify
In OCaml opam before 2.5.1, a .install field containing a destination filepath can use ../ to reach a parent directory.
🎖@cveNotify
GitHub
Invalidate .install fields containing destination filepath trying to escape their scope by kit-ty-kate · Pull Request #6897 · ocaml/opam
Absolute filepaths and paths containing '..' were already forbidden by the opam manual.
Per the <pkgname>.install section:
Absolute paths, or paths referencing the pa...
Per the <pkgname>.install section:
Absolute paths, or paths referencing the pa...
🚨 CVE-2026-40002
Red Magic 11 Pro (NX809J) contains a vulnerability that allows non-privileged applications to trigger sensitive operations. The vulnerability stems from the lack of validation for applications accessing the service interface. Exploiting this vulnerability, an attacker can write files to specific partitions and set writable system properties.
🎖@cveNotify
Red Magic 11 Pro (NX809J) contains a vulnerability that allows non-privileged applications to trigger sensitive operations. The vulnerability stems from the lack of validation for applications accessing the service interface. Exploiting this vulnerability, an attacker can write files to specific partitions and set writable system properties.
🎖@cveNotify
🚨 CVE-2026-22051
StorageGRID (formerly StorageGRID Webscale) versions prior to 11.9.0.13 and 12.0.0.6 are susceptible to a Information Disclosure vulnerability. Successful exploit could allow an authenticated attacker with low privileges to run arbitrary metrics queries, revealing metric results that they do not have access to.
🎖@cveNotify
StorageGRID (formerly StorageGRID Webscale) versions prior to 11.9.0.13 and 12.0.0.6 are susceptible to a Information Disclosure vulnerability. Successful exploit could allow an authenticated attacker with low privileges to run arbitrary metrics queries, revealing metric results that they do not have access to.
🎖@cveNotify
🚨 CVE-2026-6058
** UNSUPPORTED WHEN ASSIGNED ** An improper encoding or escaping vulnerability in the CGI program of Zyxel WRE6505 v2 firmware version V1.00(ABDV.3)C0 could allow an adjacent attacker on the WLAN to cause a denial-of-service (DoS) condition in the web management interface by convincing an authenticated administrator to visit the “AP Select” page while a malformed SSID is present.
🎖@cveNotify
** UNSUPPORTED WHEN ASSIGNED ** An improper encoding or escaping vulnerability in the CGI program of Zyxel WRE6505 v2 firmware version V1.00(ABDV.3)C0 could allow an adjacent attacker on the WLAN to cause a denial-of-service (DoS) condition in the web management interface by convincing an authenticated administrator to visit the “AP Select” page while a malformed SSID is present.
🎖@cveNotify
Zyxel
End of life | Zyxel Networks
Zyxel Networks is a leading provider of secure, AI-powered cloud networking solutions for SMBs and the enterprise edge, ensuring seamless connectivity and robust security.
🚨 CVE-2026-21999
Vulnerability in the XML Database component of Oracle Database Server. Supported versions that are affected are 23.4.0-23.26.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTPS to compromise XML Database. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all XML Database accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N).
🎖@cveNotify
Vulnerability in the XML Database component of Oracle Database Server. Supported versions that are affected are 23.4.0-23.26.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTPS to compromise XML Database. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all XML Database accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N).
🎖@cveNotify
🚨 CVE-2026-41988
uuid before 14.0.0 can make unexpected writes when external output buffers are used, and the UUID version is 3, 5, or 6. In particular, UUID version 4, which is very commonly used, is unaffected by this issue.
🎖@cveNotify
uuid before 14.0.0 can make unexpected writes when external output buffers are used, and the UUID version is 3, 5, or 6. In particular, UUID version 4, which is very commonly used, is unaffected by this issue.
🎖@cveNotify
GitHub
Merge commit from fork · uuidjs/uuid@3d2c5b0
Generate RFC-compliant UUIDs in JavaScript. Contribute to uuidjs/uuid development by creating an account on GitHub.
🚨 CVE-2026-42167
mod_sql in ProFTPD before 1.3.9a allows remote attackers to execute arbitrary code via a username, in scenarios where there is logging of USER requests with an expansion such as %U, and the SQL backend allows commands (e.g., COPY TO PROGRAM).
🎖@cveNotify
mod_sql in ProFTPD before 1.3.9a allows remote attackers to execute arbitrary code via a username, in scenarios where there is logging of USER requests with an expansion such as %U, and the SQL backend allows commands (e.g., COPY TO PROGRAM).
🎖@cveNotify
🚨 CVE-2026-37552
Unsafe deserialization vulnerability in MixPHP Framework 2.x thru 2.2.17. The sync-invoke TCP server (Server.php:87) receives data from a TCP socket, passes it directly to Opis\Closure\unserialize(), then executes the result via call_user_func(). No authentication or signature verification exists on the TCP connection. An attacker with access to the localhost TCP port (server binds 127.0.0.1) can send a crafted serialized PHP closure to achieve arbitrary code execution.
🎖@cveNotify
Unsafe deserialization vulnerability in MixPHP Framework 2.x thru 2.2.17. The sync-invoke TCP server (Server.php:87) receives data from a TCP socket, passes it directly to Opis\Closure\unserialize(), then executes the result via call_user_func(). No authentication or signature verification exists on the TCP connection. An attacker with access to the localhost TCP port (server binds 127.0.0.1) can send a crafted serialized PHP closure to achieve arbitrary code execution.
🎖@cveNotify
Gist
MixPHP 2.x Deserialization RCE and SQL Injection (CVE-2026-37552, CVE-2026-42471 through 42475)
MixPHP 2.x Deserialization RCE and SQL Injection (CVE-2026-37552, CVE-2026-42471 through 42475) - advisory_mixphp_v2.md