🚨 CVE-2026-33784
A Use of Default Password vulnerability in the Juniper Networks
Support Insights (JSI)
Virtual Lightweight Collector (vLWC) allows an unauthenticated, network-based attacker to take full control of the device.
vLWC software images ship with an initial password for a high privileged account. A change of this password is not enforced during the provisioning of the software, which can make full access to the system by unauthorized actors possible.This issue affects all versions of vLWC before 3.0.94.
🎖@cveNotify
A Use of Default Password vulnerability in the Juniper Networks
Support Insights (JSI)
Virtual Lightweight Collector (vLWC) allows an unauthenticated, network-based attacker to take full control of the device.
vLWC software images ship with an initial password for a high privileged account. A change of this password is not enforced during the provisioning of the software, which can make full access to the system by unauthorized actors possible.This issue affects all versions of vLWC before 3.0.94.
🎖@cveNotify
🚨 CVE-2026-33788
A Missing Authentication for Critical Function vulnerability in the Flexible PIC Concentrators (FPCs) of Juniper Networks Junos OS Evolved on PTX Series allows a local, authenticated attacker with low privileges to gain direct access to FPCs installed in the device.
A local user with low privileges can gain direct access to the installed FPCs as a high privileged user, which can potentially lead to a full compromise of the affected component.
This issue affects Junos OS Evolved on PTX10004, PTX10008, PTX100016, with JNP10K-LC1201 or JNP10K-LC1202:
* All versions before 21.2R3-S8-EVO,
* 21.4-EVO versions before 21.4R3-S7-EVO,
* 22.2-EVO versions before 22.2R3-S4-EVO,
* 22.3-EVO versions before 22.3R3-S3-EVO,
* 22.4-EVO versions before 22.4R3-S2-EVO,
* 23.2-EVO versions before 23.2R2-EVO.
🎖@cveNotify
A Missing Authentication for Critical Function vulnerability in the Flexible PIC Concentrators (FPCs) of Juniper Networks Junos OS Evolved on PTX Series allows a local, authenticated attacker with low privileges to gain direct access to FPCs installed in the device.
A local user with low privileges can gain direct access to the installed FPCs as a high privileged user, which can potentially lead to a full compromise of the affected component.
This issue affects Junos OS Evolved on PTX10004, PTX10008, PTX100016, with JNP10K-LC1201 or JNP10K-LC1202:
* All versions before 21.2R3-S8-EVO,
* 21.4-EVO versions before 21.4R3-S7-EVO,
* 22.2-EVO versions before 22.2R3-S4-EVO,
* 22.3-EVO versions before 22.3R3-S3-EVO,
* 22.4-EVO versions before 22.4R3-S2-EVO,
* 23.2-EVO versions before 23.2R2-EVO.
🎖@cveNotify
🚨 CVE-2026-46454
Improper Input Validation vulnerability in Apache Camel Cometd Component.
The camel-cometd component maps inbound Bayeux (CometD) message headers into the Camel Exchange without applying a HeaderFilterStrategy. CometdBinding.populateExchangeFromMessage copies the entire ext.CamelHeaders map supplied by the CometD client directly onto the Camel message (message.setHeaders), so any header name - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelJmsDestinationName - is accepted unmodified. Because a CometdComponent installs no Bayeux SecurityPolicy by default, any client that can complete the Bayeux handshake against the CometD endpoint can publish such a message without authentication. An attacker can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a JMS destination); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix implements a HeaderFilterStrategy in the camel-cometd binding (a long-standing TODO in the code) that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound CometD messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and install an explicit Bayeux SecurityPolicy on the CometdComponent so that only authenticated clients can publish.
🎖@cveNotify
Improper Input Validation vulnerability in Apache Camel Cometd Component.
The camel-cometd component maps inbound Bayeux (CometD) message headers into the Camel Exchange without applying a HeaderFilterStrategy. CometdBinding.populateExchangeFromMessage copies the entire ext.CamelHeaders map supplied by the CometD client directly onto the Camel message (message.setHeaders), so any header name - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelJmsDestinationName - is accepted unmodified. Because a CometdComponent installs no Bayeux SecurityPolicy by default, any client that can complete the Bayeux handshake against the CometD endpoint can publish such a message without authentication. An attacker can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a JMS destination); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix implements a HeaderFilterStrategy in the camel-cometd binding (a long-standing TODO in the code) that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound CometD messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and install an explicit Bayeux SecurityPolicy on the CometdComponent so that only authenticated clients can publish.
🎖@cveNotify
Apache Camel
Apache Camel Security Advisory - CVE-2026-46454
The camel-cometd component maps inbound Bayeux (CometD) message headers into the Camel Exchange without applying a HeaderFilterStrategy. CometdBinding.populateExchangeFromMessage copies the entire ext.CamelHeaders map supplied by the CometD client directly…
🚨 CVE-2026-46455
Insufficient Session Expiration vulnerability in Apache Camel Keycloak Component.
The camel-keycloak security helper KeycloakSecurityHelper.parseAndVerifyAccessToken builds a Keycloak TokenVerifier using withChecks(...) with only the subject-exists check and the realm-URL (issuer) check. Keycloak's TokenVerifier.withChecks(...) appends to an initially empty check list - the upstream default checks are installed only when withDefaultChecks() is called - so the built-in IS_ACTIVE predicate, which validates the token's exp (expiration) and nbf (not-before) claims, is never applied. As a result the helper verifies the token signature, subject and issuer but does not enforce the token's validity window: an access token that is expired, or not yet valid, is accepted as valid. Routes that rely on this helper to authenticate inbound requests therefore accept access tokens that are outside their intended lifetime.
This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes KeycloakSecurityHelper.parseAndVerifyAccessToken include the TokenVerifier.IS_ACTIVE check so that expired or not-yet-valid access tokens are rejected, aligning the helper with Keycloak's default check set. For deployments that cannot upgrade immediately, enforce token expiration outside the helper - for example validate the access token's exp/nbf claims in the route before trusting it, keep Keycloak access-token lifetimes short, and ensure any upstream gateway or resource server also validates the token validity window.
🎖@cveNotify
Insufficient Session Expiration vulnerability in Apache Camel Keycloak Component.
The camel-keycloak security helper KeycloakSecurityHelper.parseAndVerifyAccessToken builds a Keycloak TokenVerifier using withChecks(...) with only the subject-exists check and the realm-URL (issuer) check. Keycloak's TokenVerifier.withChecks(...) appends to an initially empty check list - the upstream default checks are installed only when withDefaultChecks() is called - so the built-in IS_ACTIVE predicate, which validates the token's exp (expiration) and nbf (not-before) claims, is never applied. As a result the helper verifies the token signature, subject and issuer but does not enforce the token's validity window: an access token that is expired, or not yet valid, is accepted as valid. Routes that rely on this helper to authenticate inbound requests therefore accept access tokens that are outside their intended lifetime.
This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes KeycloakSecurityHelper.parseAndVerifyAccessToken include the TokenVerifier.IS_ACTIVE check so that expired or not-yet-valid access tokens are rejected, aligning the helper with Keycloak's default check set. For deployments that cannot upgrade immediately, enforce token expiration outside the helper - for example validate the access token's exp/nbf claims in the route before trusting it, keep Keycloak access-token lifetimes short, and ensure any upstream gateway or resource server also validates the token validity window.
🎖@cveNotify
Apache Camel
Apache Camel Security Advisory - CVE-2026-46455
The camel-keycloak security helper KeycloakSecurityHelper.parseAndVerifyAccessToken builds a Keycloak TokenVerifier using withChecks(...) with only the subject-exists check and the realm-URL (issuer) check. Keycloak's TokenVerifier.withChecks(...) appends…
🚨 CVE-2026-46456
Improper Input Validation vulnerability in Apache Camel AWS2-SQS Component.
The camel-aws2-sqs component map inbound message attributes into the Camel Exchange through a component-specific HeaderFilterStrategy. Sqs2HeaderFilterStrategy configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers being written to the broker) but did not configure an inbound filter. As a result, when Sqs2Consumer copies each SQS MessageAttribute into the Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, DefaultHeaderFilterStrategy applied no inbound rule and treated every header name as not filtered - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - copying them unmodified onto the Camel message. Any principal able to send messages to the consumed SQS queue (for example a cross-account sender or a lower-privileged in-account component holding sqs:SendMessage) could therefore set arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds an inbound HeaderFilterStrategy rule to Sqs2HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so sender-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and restrict who may send to the consumed SQS queue by applying least-privilege sqs:SendMessage permissions on the queue resource policy.
🎖@cveNotify
Improper Input Validation vulnerability in Apache Camel AWS2-SQS Component.
The camel-aws2-sqs component map inbound message attributes into the Camel Exchange through a component-specific HeaderFilterStrategy. Sqs2HeaderFilterStrategy configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers being written to the broker) but did not configure an inbound filter. As a result, when Sqs2Consumer copies each SQS MessageAttribute into the Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, DefaultHeaderFilterStrategy applied no inbound rule and treated every header name as not filtered - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - copying them unmodified onto the Camel message. Any principal able to send messages to the consumed SQS queue (for example a cross-account sender or a lower-privileged in-account component holding sqs:SendMessage) could therefore set arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds an inbound HeaderFilterStrategy rule to Sqs2HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so sender-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and restrict who may send to the consumed SQS queue by applying least-privilege sqs:SendMessage permissions on the queue resource policy.
🎖@cveNotify
Apache Camel
Apache Camel Security Advisory - CVE-2026-46456
The camel-aws2-sqs component maps inbound message attributes into the Camel Exchange through a component-specific HeaderFilterStrategy. Sqs2HeaderFilterStrategy configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and…
🚨 CVE-2026-46457
Improper Input Validation vulnerability in Apache Camel NATS component.
The camel-nats component maps inbound NATS message headers into the Camel Exchange but defaulted its headerFilterStrategy to a bare new DefaultHeaderFilterStrategy() with no inbound rules configured (NatsConfiguration). With no inFilter, inFilterPattern or inFilterStartsWith set, DefaultHeaderFilterStrategy.applyFilterToExternalHeaders returns not filtered for every header name, so NatsConsumer copies every NATS message header - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - unmodified onto the Camel message. A client able to publish to the consumed NATS subject can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. NATS message headers require NATS 2.2 or later, and the issue is reachable without credentials when the NATS server is configured without authentication (the NATS server default).
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes camel-nats default to a dedicated NatsHeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound NATS messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and enable authentication on the NATS server so that only trusted clients can publish to the consumed subject.
🎖@cveNotify
Improper Input Validation vulnerability in Apache Camel NATS component.
The camel-nats component maps inbound NATS message headers into the Camel Exchange but defaulted its headerFilterStrategy to a bare new DefaultHeaderFilterStrategy() with no inbound rules configured (NatsConfiguration). With no inFilter, inFilterPattern or inFilterStartsWith set, DefaultHeaderFilterStrategy.applyFilterToExternalHeaders returns not filtered for every header name, so NatsConsumer copies every NATS message header - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - unmodified onto the Camel message. A client able to publish to the consumed NATS subject can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. NATS message headers require NATS 2.2 or later, and the issue is reachable without credentials when the NATS server is configured without authentication (the NATS server default).
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes camel-nats default to a dedicated NatsHeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound NATS messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and enable authentication on the NATS server so that only trusted clients can publish to the consumed subject.
🎖@cveNotify
Apache Camel
Apache Camel Security Advisory - CVE-2026-46457
The camel-nats component maps inbound NATS message headers into the Camel Exchange but defaulted its headerFilterStrategy to a bare new DefaultHeaderFilterStrategy() with no inbound rules configured (NatsConfiguration). With no inFilter, inFilterPattern or…
🚨 CVE-2026-48203
Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel Solr component.
The camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix constants (SolrConstants.HEADER_PARAM_PREFIX / HEADER_FIELD_PREFIX) were the plain strings SolrParam. / SolrField.. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a solr: producer, any HTTP client could therefore set SolrParam.* headers to inject arbitrary Solr request parameters - including shards or stream.url, which cause the Solr server to issue server-side requests to an attacker-chosen URL (server-side request forgery, for example to an internal service or a cloud metadata endpoint), or qt to reach administrative request handlers - and set SolrField.* headers to inject arbitrary fields into indexed documents. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Solr parameters or fields via the raw header prefixes must use CamelSolrParam. / CamelSolrField. instead of SolrParam. / SolrField.. For deployments that cannot upgrade immediately, strip the SolrParam.* and SolrField.* headers from any untrusted ingress before the solr: producer, and set the required Solr parameters and fields from a trusted source in the route.
🎖@cveNotify
Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel Solr component.
The camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix constants (SolrConstants.HEADER_PARAM_PREFIX / HEADER_FIELD_PREFIX) were the plain strings SolrParam. / SolrField.. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a solr: producer, any HTTP client could therefore set SolrParam.* headers to inject arbitrary Solr request parameters - including shards or stream.url, which cause the Solr server to issue server-side requests to an attacker-chosen URL (server-side request forgery, for example to an internal service or a cloud metadata endpoint), or qt to reach administrative request handlers - and set SolrField.* headers to inject arbitrary fields into indexed documents. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Solr parameters or fields via the raw header prefixes must use CamelSolrParam. / CamelSolrField. instead of SolrParam. / SolrField.. For deployments that cannot upgrade immediately, strip the SolrParam.* and SolrField.* headers from any untrusted ingress before the solr: producer, and set the required Solr parameters and fields from a trusted source in the route.
🎖@cveNotify
Apache Camel
Apache Camel Security Advisory - CVE-2026-48203
The camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix…
🚨 CVE-2026-48204
Improper Input Validation, Improper Access Control vulnerability in Apache Camel in Camel Mongodb Gridfs component.
The camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint's operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFS_OPERATION, GRIDFS_OBJECT_ID, GRIDFS_METADATA, GRIDFS_CHUNKSIZE, GRIDFS_FILE_ID_PRODUCED) were the plain strings gridfs.operation, gridfs.objectid, gridfs.metadata, gridfs.chunksize and gridfs.fileid. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a mongodb-gridfs: producer with no explicit operation, any HTTP client could therefore set the gridfs.operation header to override the route's intended operation - switching, for example, a file upload to remove (deleting a file identified by the attacker-supplied gridfs.objectid), listAll (enumerating every file in the bucket) or findOne (reading a file) - and supply a gridfs.metadata value that is parsed as a MongoDB document, enabling NoSQL operator injection. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive GridFS operations or metadata via the raw header names must use CamelGridFsOperation / CamelGridFsObjectId / CamelGridFsMetadata / CamelGridFsChunkSize / CamelGridFsFileId instead of the gridfs.* names. For deployments that cannot upgrade immediately, set an explicit operation on the mongodb-gridfs: endpoint so the operation is not taken from a header, and strip the gridfs.* headers from any untrusted ingress before the producer.
🎖@cveNotify
Improper Input Validation, Improper Access Control vulnerability in Apache Camel in Camel Mongodb Gridfs component.
The camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint's operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFS_OPERATION, GRIDFS_OBJECT_ID, GRIDFS_METADATA, GRIDFS_CHUNKSIZE, GRIDFS_FILE_ID_PRODUCED) were the plain strings gridfs.operation, gridfs.objectid, gridfs.metadata, gridfs.chunksize and gridfs.fileid. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a mongodb-gridfs: producer with no explicit operation, any HTTP client could therefore set the gridfs.operation header to override the route's intended operation - switching, for example, a file upload to remove (deleting a file identified by the attacker-supplied gridfs.objectid), listAll (enumerating every file in the bucket) or findOne (reading a file) - and supply a gridfs.metadata value that is parsed as a MongoDB document, enabling NoSQL operator injection. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive GridFS operations or metadata via the raw header names must use CamelGridFsOperation / CamelGridFsObjectId / CamelGridFsMetadata / CamelGridFsChunkSize / CamelGridFsFileId instead of the gridfs.* names. For deployments that cannot upgrade immediately, set an explicit operation on the mongodb-gridfs: endpoint so the operation is not taken from a header, and strip the gridfs.* headers from any untrusted ingress before the producer.
🎖@cveNotify
Apache Camel
Apache Camel Security Advisory - CVE-2026-48204
The camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint's operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFS_OPERATION,…
🚨 CVE-2026-48205
Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel DNS component.
The camel-dns producers read DNS operation parameters - the resolver to query, the name or domain to look up, the record type and class, and the search term - from Exchange message headers whose constant values (DnsConstants.DNS_SERVER, DNS_NAME, DNS_DOMAIN, DNS_TYPE, DNS_CLASS, TERM) were the plain strings dns.server, dns.name, dns.domain, dns.type, dns.class and term. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a dns: producer, any HTTP client could therefore set the dns.server header to make the dig producer build a SimpleResolver pointing at an attacker-controlled DNS server - a server-side request forgery via DNS, through which the attacker observes the queried name and can return poisoned responses - and set the dns.name / dns.domain headers to resolve arbitrary internal hostnames, disclosing whether they exist (internal network reconnaissance). No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive DNS operations via the raw header names must use CamelDnsServer / CamelDnsName / CamelDnsDomain / CamelDnsType / CamelDnsClass / CamelDnsTerm instead of the dns.* / term names. For deployments that cannot upgrade immediately, strip the dns.* and term headers from any untrusted ingress before the dns: producer, and set the DNS server and lookup parameters from a trusted source in the route.
🎖@cveNotify
Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel DNS component.
The camel-dns producers read DNS operation parameters - the resolver to query, the name or domain to look up, the record type and class, and the search term - from Exchange message headers whose constant values (DnsConstants.DNS_SERVER, DNS_NAME, DNS_DOMAIN, DNS_TYPE, DNS_CLASS, TERM) were the plain strings dns.server, dns.name, dns.domain, dns.type, dns.class and term. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a dns: producer, any HTTP client could therefore set the dns.server header to make the dig producer build a SimpleResolver pointing at an attacker-controlled DNS server - a server-side request forgery via DNS, through which the attacker observes the queried name and can return poisoned responses - and set the dns.name / dns.domain headers to resolve arbitrary internal hostnames, disclosing whether they exist (internal network reconnaissance). No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive DNS operations via the raw header names must use CamelDnsServer / CamelDnsName / CamelDnsDomain / CamelDnsType / CamelDnsClass / CamelDnsTerm instead of the dns.* / term names. For deployments that cannot upgrade immediately, strip the dns.* and term headers from any untrusted ingress before the dns: producer, and set the DNS server and lookup parameters from a trusted source in the route.
🎖@cveNotify
Apache Camel
Apache Camel Security Advisory - CVE-2026-48205
The camel-dns producers read DNS operation parameters - the resolver to query, the name or domain to look up, the record type and class, and the search term - from Exchange message headers whose constant values (DnsConstants.DNS_SERVER, DNS_NAME, DNS_DOMAIN…
🚨 CVE-2026-48206
Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel JIRA component.
The camel-jira producers read their operation parameters - the issue key, project key, transition id, summary, type, assignee, components, watchers, link type, work-log minutes and others - from Exchange message headers. The header constants defined in JiraConstants (for example ISSUE_KEY = IssueKey, ISSUE_PROJECT_KEY = ProjectKey, ISSUE_TRANSITION_ID = IssueTransitionId, LINK_TYPE = linkType) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a jira: producer, any HTTP client could therefore supply these headers and override the values the route intended, driving JIRA operations against the configured JIRA instance with the endpoint's configured service-account credentials - for example deleting or transitioning an arbitrary issue (via IssueKey / IssueTransitionId), creating an issue in a different project (via ProjectKey), modifying issue fields, adding or removing watchers, or logging work. The operations are bounded by what the configured service account is permitted to do. No credentials are required from the attacker when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive JIRA operations via the raw header names must use the CamelJira* names (for example CamelJiraIssueKey) instead of the old values. For deployments that cannot upgrade immediately, strip the camel-jira control headers from any untrusted ingress before the jira: producer (for example removing the IssueKey, ProjectKey, IssueTransitionId and related headers at the start of the route), and set the required JIRA operation parameters from a trusted source.
🎖@cveNotify
Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel JIRA component.
The camel-jira producers read their operation parameters - the issue key, project key, transition id, summary, type, assignee, components, watchers, link type, work-log minutes and others - from Exchange message headers. The header constants defined in JiraConstants (for example ISSUE_KEY = IssueKey, ISSUE_PROJECT_KEY = ProjectKey, ISSUE_TRANSITION_ID = IssueTransitionId, LINK_TYPE = linkType) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a jira: producer, any HTTP client could therefore supply these headers and override the values the route intended, driving JIRA operations against the configured JIRA instance with the endpoint's configured service-account credentials - for example deleting or transitioning an arbitrary issue (via IssueKey / IssueTransitionId), creating an issue in a different project (via ProjectKey), modifying issue fields, adding or removing watchers, or logging work. The operations are bounded by what the configured service account is permitted to do. No credentials are required from the attacker when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive JIRA operations via the raw header names must use the CamelJira* names (for example CamelJiraIssueKey) instead of the old values. For deployments that cannot upgrade immediately, strip the camel-jira control headers from any untrusted ingress before the jira: producer (for example removing the IssueKey, ProjectKey, IssueTransitionId and related headers at the start of the route), and set the required JIRA operation parameters from a trusted source.
🎖@cveNotify
Apache Camel
Apache Camel Security Advisory - CVE-2026-48206
The camel-jira producers read their operation parameters - the issue key, project key, transition id, summary, type, assignee, components, watchers, link type, work-log minutes and others - from Exchange message headers. The header constants defined in JiraConstants…
🚨 CVE-2026-49097
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel IRC component.
The camel-irc producer chooses the destination of an outgoing IRC message from the irc.sendTo Exchange header (the constant IrcConstants.IRC_SEND_TO, value irc.sendTo); when that header is present it overrides the channel list configured on the endpoint, and the message is sent only to the specified destination. This and the component's other control headers (irc.target, irc.messageType, irc.user.*, irc.num, irc.value) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into an irc: producer, any HTTP client could therefore set the irc.sendTo header and redirect a message that the route intended for a configured channel to an arbitrary IRC channel or user - exfiltrating the message content to an attacker-chosen nickname, leaking it into a public channel, or delivering messages that appear to come from the bot. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set IRC headers via the raw header names must use the CamelIrc* names (for example CamelIrcSendTo) instead of the old irc.* values. For deployments that cannot upgrade immediately, strip the irc.* headers from any untrusted ingress before the irc: producer (for example removeHeaders('irc.*') at the start of the route), and set the IRC destination from a trusted source.
🎖@cveNotify
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel IRC component.
The camel-irc producer chooses the destination of an outgoing IRC message from the irc.sendTo Exchange header (the constant IrcConstants.IRC_SEND_TO, value irc.sendTo); when that header is present it overrides the channel list configured on the endpoint, and the message is sent only to the specified destination. This and the component's other control headers (irc.target, irc.messageType, irc.user.*, irc.num, irc.value) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into an irc: producer, any HTTP client could therefore set the irc.sendTo header and redirect a message that the route intended for a configured channel to an arbitrary IRC channel or user - exfiltrating the message content to an attacker-chosen nickname, leaking it into a public channel, or delivering messages that appear to come from the bot. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set IRC headers via the raw header names must use the CamelIrc* names (for example CamelIrcSendTo) instead of the old irc.* values. For deployments that cannot upgrade immediately, strip the irc.* headers from any untrusted ingress before the irc: producer (for example removeHeaders('irc.*') at the start of the route), and set the IRC destination from a trusted source.
🎖@cveNotify
Apache Camel
Apache Camel Security Advisory - CVE-2026-49097
The camel-irc producer chooses the destination of an outgoing IRC message from the irc.sendTo Exchange header (the constant IrcConstants.IRC_SEND_TO, value irc.sendTo); when that header is present it overrides the channel list configured on the endpoint,…
🚨 CVE-2026-49098
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel Kafka Component.
The camel-kafka producer can override its configured target topic at runtime from the kafka.OVERRIDE_TOPIC Exchange header: KafkaProducer.evaluateTopic() returns the header value in preference to the topic configured on the endpoint. The control-header constants in KafkaConstants (for example OVERRIDE_TOPIC = kafka.OVERRIDE_TOPIC, OVERRIDE_TIMESTAMP = kafka.OVERRIDE_TIMESTAMP, PARTITION_KEY = kafka.PARTITION_KEY) used plain, non-Camel-prefixed values. camel-kafka's own KafkaHeaderFilterStrategy does filter the kafka.* namespace, but only on the Kafka-to-Exchange serialization boundary (reading Kafka record headers into the Exchange, and writing Exchange headers into a Kafka record); it does not apply to headers that arrive from an upstream consumer in a multi-component route. The upstream HTTP consumer uses HttpHeaderFilterStrategy, which blocks only the Camel / camel namespace, so a kafka.* header passes through unfiltered. As a result, in a route that bridges an HTTP consumer (for example platform-http) into a kafka: producer, any HTTP client could set the kafka.OVERRIDE_TOPIC header and cause the message to be published to an arbitrary Kafka topic instead of the configured one - redirecting it to a sensitive internal topic, or injecting attacker-crafted messages into a topic consumed by a critical downstream service. The related kafka.OVERRIDE_TIMESTAMP and kafka.PARTITION_KEY headers could likewise be injected to backdate messages or target specific partitions. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set or read Kafka headers via the raw header names must use the CamelKafka* names (for example CamelKafkaOverrideTopic and CamelKafkaTopic) instead of the old kafka.* values. For deployments that cannot upgrade immediately, strip the kafka.* headers from any untrusted ingress before the kafka: producer (for example removeHeaders('kafka.*') at the start of the route), and set the target topic from a trusted source.
🎖@cveNotify
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel Kafka Component.
The camel-kafka producer can override its configured target topic at runtime from the kafka.OVERRIDE_TOPIC Exchange header: KafkaProducer.evaluateTopic() returns the header value in preference to the topic configured on the endpoint. The control-header constants in KafkaConstants (for example OVERRIDE_TOPIC = kafka.OVERRIDE_TOPIC, OVERRIDE_TIMESTAMP = kafka.OVERRIDE_TIMESTAMP, PARTITION_KEY = kafka.PARTITION_KEY) used plain, non-Camel-prefixed values. camel-kafka's own KafkaHeaderFilterStrategy does filter the kafka.* namespace, but only on the Kafka-to-Exchange serialization boundary (reading Kafka record headers into the Exchange, and writing Exchange headers into a Kafka record); it does not apply to headers that arrive from an upstream consumer in a multi-component route. The upstream HTTP consumer uses HttpHeaderFilterStrategy, which blocks only the Camel / camel namespace, so a kafka.* header passes through unfiltered. As a result, in a route that bridges an HTTP consumer (for example platform-http) into a kafka: producer, any HTTP client could set the kafka.OVERRIDE_TOPIC header and cause the message to be published to an arbitrary Kafka topic instead of the configured one - redirecting it to a sensitive internal topic, or injecting attacker-crafted messages into a topic consumed by a critical downstream service. The related kafka.OVERRIDE_TIMESTAMP and kafka.PARTITION_KEY headers could likewise be injected to backdate messages or target specific partitions. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set or read Kafka headers via the raw header names must use the CamelKafka* names (for example CamelKafkaOverrideTopic and CamelKafkaTopic) instead of the old kafka.* values. For deployments that cannot upgrade immediately, strip the kafka.* headers from any untrusted ingress before the kafka: producer (for example removeHeaders('kafka.*') at the start of the route), and set the target topic from a trusted source.
🎖@cveNotify
Apache Camel
Apache Camel Security Advisory - CVE-2026-49098
The camel-kafka producer can override its configured target topic at runtime from the kafka.OVERRIDE_TOPIC Exchange header: KafkaProducer.evaluateTopic() returns the header value in preference to the topic configured on the endpoint. The control-header constants…
🚨 CVE-2026-49099
Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Salesforce Component.
The camel-salesforce producer resolves its operation parameters - the SOQL query, the SOSL search, the target SObject name and id, the Apex REST URL and method, and the Apex query parameters - from Exchange message headers, reading the header in preference to the value configured on the endpoint (AbstractSalesforceProcessor.getParameter() reads the header first and uses the endpoint configuration only as a fallback). The control-header constants in SalesforceEndpointConfig (for example SOBJECT_QUERY = sObjectQuery, SOBJECT_SEARCH = sObjectSearch, SOBJECT_NAME = sObjectName, SOBJECT_ID = sObjectId, APEX_URL = apexUrl, APEX_METHOD = apexMethod, and the apexQueryParam. prefix) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a salesforce: producer, any HTTP client could therefore set these headers and override what the route intended - supplying its own SOQL query or SOSL search to read data from any SObject the connected Salesforce user can access, overriding the target SObject name and id for CRUD operations, or redirecting an Apex REST call to a different endpoint and HTTP method (including destructive methods) with injected query parameters. All such operations run with the full permissions of the Salesforce connected (integration) user, which is typically broad. No credentials are required from the attacker when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Salesforce operation parameters via the raw header names must use the CamelSalesforce* names (for example CamelSalesforceSObjectQuery and CamelSalesforceApexUrl) instead of the old sObject* / apex* values; the endpoint-option spelling is unchanged. For deployments that cannot upgrade immediately, strip the Salesforce control headers from any untrusted ingress before the salesforce: producer (for example removeHeaders('sObject*') and removeHeaders('apex*') at the start of the route), and set the query, SObject and Apex parameters from a trusted source.
🎖@cveNotify
Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Salesforce Component.
The camel-salesforce producer resolves its operation parameters - the SOQL query, the SOSL search, the target SObject name and id, the Apex REST URL and method, and the Apex query parameters - from Exchange message headers, reading the header in preference to the value configured on the endpoint (AbstractSalesforceProcessor.getParameter() reads the header first and uses the endpoint configuration only as a fallback). The control-header constants in SalesforceEndpointConfig (for example SOBJECT_QUERY = sObjectQuery, SOBJECT_SEARCH = sObjectSearch, SOBJECT_NAME = sObjectName, SOBJECT_ID = sObjectId, APEX_URL = apexUrl, APEX_METHOD = apexMethod, and the apexQueryParam. prefix) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a salesforce: producer, any HTTP client could therefore set these headers and override what the route intended - supplying its own SOQL query or SOSL search to read data from any SObject the connected Salesforce user can access, overriding the target SObject name and id for CRUD operations, or redirecting an Apex REST call to a different endpoint and HTTP method (including destructive methods) with injected query parameters. All such operations run with the full permissions of the Salesforce connected (integration) user, which is typically broad. No credentials are required from the attacker when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Salesforce operation parameters via the raw header names must use the CamelSalesforce* names (for example CamelSalesforceSObjectQuery and CamelSalesforceApexUrl) instead of the old sObject* / apex* values; the endpoint-option spelling is unchanged. For deployments that cannot upgrade immediately, strip the Salesforce control headers from any untrusted ingress before the salesforce: producer (for example removeHeaders('sObject*') and removeHeaders('apex*') at the start of the route), and set the query, SObject and Apex parameters from a trusted source.
🎖@cveNotify
Apache Camel
Apache Camel Security Advisory - CVE-2026-49099
The camel-salesforce producer resolves its operation parameters - the SOQL query, the SOSL search, the target SObject name and id, the Apex REST URL and method, and the Apex query parameters - from Exchange message headers, reading the header in preference…
🚨 CVE-2026-9182
ArcGIS Server contains an unrestricted file upload vulnerability. An unauthenticated attacker could exploit this issue by uploading a crafted file to the affected endpoint. Successful exploitation could allow arbitrary file upload.
🎖@cveNotify
ArcGIS Server contains an unrestricted file upload vulnerability. An unauthenticated attacker could exploit this issue by uploading a crafted file to the affected endpoint. Successful exploitation could allow arbitrary file upload.
🎖@cveNotify
ArcGIS Blog
May 2026 ArcGIS Security Bulletin
🚨 CVE-2026-50133
Hugo is a static site generator. Prior to 0.162.0, Hugo accepts content files in several markup formats. Files mapped to the text/html media type (typically .html files under /content, or pages produced by a content adapter that sets content.mediaType = "text/html") had their body emitted verbatim into the rendered page. A site that ingests HTML content from an untrusted source could therefore be served stored cross-site scripting. This vulnerability is fixed in 0.162.0.
🎖@cveNotify
Hugo is a static site generator. Prior to 0.162.0, Hugo accepts content files in several markup formats. Files mapped to the text/html media type (typically .html files under /content, or pages produced by a content adapter that sets content.mediaType = "text/html") had their body emitted verbatim into the rendered page. A site that ingests HTML content from an untrusted source could therefore be served stored cross-site scripting. This vulnerability is fixed in 0.162.0.
🎖@cveNotify
GitHub
Disallow HTML content by default · gohugoio/hugo@e41a064
For security reasons. Enable in security config, e.g.:
```toml
[security]
allowContent = ['.*']
```
```toml
[security]
allowContent = ['.*']
```
🚨 CVE-2026-50134
Hugo is a static site generator. From 0.91.0 until 0.162.0, resources.GetRemote enforces security.http.urls on the URL it is called with, but it did not re-validate intermediate URLs on HTTP 3xx redirects. An allowed server (or an attacker controlling its DNS or response) could therefore redirect the request to a host that the policy was meant to forbid and Hugo would fetch from the redirected target. The same bypass also lifted any host-shape restriction the operator had put in place. This vulnerability is fixed in 0.162.0.
🎖@cveNotify
Hugo is a static site generator. From 0.91.0 until 0.162.0, resources.GetRemote enforces security.http.urls on the URL it is called with, but it did not re-validate intermediate URLs on HTTP 3xx redirects. An allowed server (or an attacker controlling its DNS or response) could therefore redirect the request to a host that the policy was meant to forbid and Hugo would fetch from the redirected target. The same bypass also lifted any host-shape restriction the operator had put in place. This vulnerability is fixed in 0.162.0.
🎖@cveNotify
GitHub
security: Validate redirects against security.http.urls · gohugoio/hugo@86fbb0f
A server allowed by security.http.urls could redirect resources.GetRemote
to a host that is not. Re-run the check on each hop via CheckRedirect.
Fixes #14871
to a host that is not. Re-run the check on each hop via CheckRedirect.
Fixes #14871
🚨 CVE-2026-58402
Hugo is a static site generator. From 0.60.0 until 0.163.3, Hugo's default code-block renderer wrote the Markdown code-fence language or info-string into the code class="language-…" data-lang="…" wrapper without HTML escaping. A fence info-string containing a quote and a script payload breaks out of the attribute and injects a live script element. This issue is fixed in 0.163.3.
🎖@cveNotify
Hugo is a static site generator. From 0.60.0 until 0.163.3, Hugo's default code-block renderer wrote the Markdown code-fence language or info-string into the code class="language-…" data-lang="…" wrapper without HTML escaping. A fence info-string containing a quote and a script payload breaks out of the attribute and injects a live script element. This issue is fixed in 0.163.3.
🎖@cveNotify
GitHub
markup/highlight: Escape lang in default code block rendering · gohugoio/hugo@ce1a7e0
The world’s fastest framework for building websites. - markup/highlight: Escape lang in default code block rendering · gohugoio/hugo@ce1a7e0
🚨 CVE-2026-58403
Hugo is a static site generator. From v0.123.0 through v0.163.0, Hugo's virtual filesystem is designed so that files under a mount cannot reach outside the mount tree, but a regression caused RootMappingFs.statRoot to call Stat, which follows symlinks, instead of Lstat, so a direct os.ReadFile "somefile" where somefile was a symlink pointing outside the mount would return the target's contents. This effectively let a symlink planted inside a theme or local mount read arbitrary files reachable to the user running hugo. This issue is fixed in v0.163.1.
🎖@cveNotify
Hugo is a static site generator. From v0.123.0 through v0.163.0, Hugo's virtual filesystem is designed so that files under a mount cannot reach outside the mount tree, but a regression caused RootMappingFs.statRoot to call Stat, which follows symlinks, instead of Lstat, so a direct os.ReadFile "somefile" where somefile was a symlink pointing outside the mount would return the target's contents. This effectively let a symlink planted inside a theme or local mount read arbitrary files reachable to the user running hugo. This issue is fixed in v0.163.1.
🎖@cveNotify
GitHub
Drop symlinks in os.ReadDir, os.ReadFile, os.Stat and os.FileExists · gohugoio/hugo@cf9c8f9
Fixes #15019
🚨 CVE-2026-58404
Hugo is a static site generator. From v0.162.0 through v0.163.0, the default security.http.urls policy denies requests to loopback, internal, and cloud-metadata IPv4 literals, but the deny rule only matched dotted-decimal notation, so alternate IPv4 encodings of the same addresses, including integer, hex, or octal, passed the policy. When a template passes an untrusted or data-derived URL to resources.GetRemote and the host platform uses the cgo system resolver, these encodings resolve to the blocked address, allowing build-time server-side requests to loopback and internal services, including the cloud-metadata endpoint in hosted or CI builds; the same check is reused on redirects, so the gap also applies to each redirect hop. This issue is fixed in v0.163.1.
🎖@cveNotify
Hugo is a static site generator. From v0.162.0 through v0.163.0, the default security.http.urls policy denies requests to loopback, internal, and cloud-metadata IPv4 literals, but the deny rule only matched dotted-decimal notation, so alternate IPv4 encodings of the same addresses, including integer, hex, or octal, passed the policy. When a template passes an untrusted or data-derived URL to resources.GetRemote and the host platform uses the cgo system resolver, these encodings resolve to the blocked address, allowing build-time server-side requests to loopback and internal services, including the cloud-metadata endpoint in hosted or CI builds; the same check is reused on redirects, so the gap also applies to each redirect hop. This issue is fixed in v0.163.1.
🎖@cveNotify
GitHub
security: Normalize integer IPv4 host encodings in http.urls check · gohugoio/hugo@a00b5c7
Canonicalize integer/hex/octal IPv4 hosts to dotted-decimal before
applying the security.http.urls policy so all encodings of an address
are treated alike.
Co-Authored-By: Claude Opus 4.8 (1M cont...
applying the security.http.urls policy so all encodings of an address
are treated alike.
Co-Authored-By: Claude Opus 4.8 (1M cont...
🚨 CVE-2026-54763
Traefik is an HTTP reverse proxy and load balancer. Prior to v2.11.51, v3.6.22, and v3.7.6, Traefik's BasicAuth, DigestAuth, and ForwardAuth middlewares strip canonical-cased spoofed identity headers before writing Traefik's own value, but do not account for underscore-variant header names, which many backends normalize identically to dashed forms. An attacker able to reach a protected route can inject an underscore-variant header that survives Traefik's stripping and reaches the backend alongside, or on the unauthenticated ForwardAuth authResponseHeaders path instead of, the value Traefik intended to set, spoofing identity or authorization context. This issue is fixed in versions v2.11.51, v3.6.22, and v3.7.6.
🎖@cveNotify
Traefik is an HTTP reverse proxy and load balancer. Prior to v2.11.51, v3.6.22, and v3.7.6, Traefik's BasicAuth, DigestAuth, and ForwardAuth middlewares strip canonical-cased spoofed identity headers before writing Traefik's own value, but do not account for underscore-variant header names, which many backends normalize identically to dashed forms. An attacker able to reach a protected route can inject an underscore-variant header that survives Traefik's stripping and reaches the backend alongside, or on the unauthenticated ForwardAuth authResponseHeaders path instead of, the value Traefik intended to set, spoofing identity or authorization context. This issue is fixed in versions v2.11.51, v3.6.22, and v3.7.6.
🎖@cveNotify
GitHub
Add an option to remove request headers with underscores · traefik/traefik@108a526
The Cloud Native Application Proxy. Contribute to traefik/traefik development by creating an account on GitHub.
🚨 CVE-2026-54764
Traefik is an HTTP reverse proxy and load balancer. Prior to v2.11.51, v3.6.22, and v3.7.6, Traefik's ForwardAuth middleware, even when configured with trustForwardHeader: false, derives the X-Forwarded-Port header sent to the authentication service from the original incoming request instead of the sanitized forwarded request. As a result, an unauthenticated remote attacker can inject an X-Forwarded-Proto: https header over a plain HTTP connection and cause Traefik to forward X-Forwarded-Port: 443 to the authentication service, bypassing port-based authorization checks. This issue is fixed in versions v2.11.51, v3.6.22, and v3.7.6.
🎖@cveNotify
Traefik is an HTTP reverse proxy and load balancer. Prior to v2.11.51, v3.6.22, and v3.7.6, Traefik's ForwardAuth middleware, even when configured with trustForwardHeader: false, derives the X-Forwarded-Port header sent to the authentication service from the original incoming request instead of the sanitized forwarded request. As a result, an unauthenticated remote attacker can inject an X-Forwarded-Proto: https header over a plain HTTP connection and cause Traefik to forward X-Forwarded-Port: 443 to the authentication service, bypassing port-based authorization checks. This issue is fixed in versions v2.11.51, v3.6.22, and v3.7.6.
🎖@cveNotify
GitHub
fix x-forwarded-port in forward-auth · traefik/traefik@7ae92d8
The Cloud Native Application Proxy. Contribute to traefik/traefik development by creating an account on GitHub.