🚨 CVE-2026-52938
In the Linux kernel, the following vulnerability has been resolved:

bpf: Fix NULL pointer dereference in bpf_sk_storage_clone and diag paths

bpf_selem_unlink_nofail() sets SDATA(selem)->smap to NULL before
removing the selem from the storage hlist. A concurrent RCU reader in
bpf_sk_storage_clone() can observe the selem still on the list with
smap already NULL, causing a NULL pointer dereference.

general protection fault, probably for non-canonical address 0xdffffc000000000a:
KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057]
RIP: 0010:bpf_sk_storage_clone+0x1cd/0xaa0 net/core/bpf_sk_storage.c:174
Call Trace:
<IRQ>
sk_clone+0xfed/0x1980 net/core/sock.c:2591
inet_csk_clone_lock+0x30/0x760 net/ipv4/inet_connection_sock.c:1222
tcp_create_openreq_child+0x35/0x2680 net/ipv4/tcp_minisocks.c:571
tcp_v4_syn_recv_sock+0x123/0xf90 net/ipv4/tcp_ipv4.c:1729
tcp_check_req+0x8e1/0x2580 include/net/tcp.h:855
tcp_v4_rcv+0x1845/0x3b80 net/ipv4/tcp_ipv4.c:2347

Add a NULL check for smap in bpf_sk_storage_clone().

bpf_sk_storage_diag_put_all() has the same issue. Add a NULL check
and pass the validated smap directly to diag_get(), which is refactored
to take smap as a parameter instead of reading it internally.

bpf_sk_storage_diag_put() uses diag->maps[i] which is always valid
under its refcount, so diag->maps[i] is passed directly to diag_get().

🎖@cveNotify

🚨 CVE-2026-52939
In the Linux kernel, the following vulnerability has been resolved:

net/rds: fix NULL deref in rds_ib_send_cqe_handler() on masked atomic completion

rds_ib_xmit_atomic() always programs a masked atomic opcode
(IB_WR_MASKED_ATOMIC_CMP_AND_SWP or IB_WR_MASKED_ATOMIC_FETCH_AND_ADD)
for every RDS atomic cmsg. But the completion-side switch in
rds_ib_send_unmap_op() only handles the non-masked opcodes, so a masked
atomic completion falls through to default and returns rm == NULL while
send->s_op is left set. rds_ib_send_cqe_handler() then dereferences the
NULL rm via rm->m_final_op, oopsing in softirq context. An unprivileged
AF_RDS sendmsg() of an atomic cmsg over an active RDS/IB connection
triggers it; on hardware that natively accepts masked atomics (mlx4,
mlx5) no extra setup is needed.

RDS/IB: rds_ib_send_unmap_op: unexpected opcode 0xd in WR!
Oops: general protection fault [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000190-0x0000000000000197]
RIP: rds_ib_send_cqe_handler+0x25c/0xb10 (net/rds/ib_send.c:282)
Call Trace:
<IRQ>
rds_ib_send_cqe_handler (net/rds/ib_send.c:282)
poll_scq (net/rds/ib_cm.c:274)
rds_ib_tasklet_fn_send (net/rds/ib_cm.c:294)
tasklet_action_common (kernel/softirq.c:943)
handle_softirqs (kernel/softirq.c:573)
run_ksoftirqd (kernel/softirq.c:479)
</IRQ>
Kernel panic - not syncing: Fatal exception in interrupt

Handle the masked atomic opcodes in the same case as the non-masked
ones: they map to the same struct rds_message.atomic union member, so
the existing container_of()/rds_ib_send_unmap_atomic() body is correct
for them.

🎖@cveNotify

🚨 CVE-2026-52940
In the Linux kernel, the following vulnerability has been resolved:

tun: zero the whole vnet header in tun_put_user()

tun_put_user() declares an on-stack struct virtio_net_hdr_v1_hash_tunnel
without zeroing it. For a non-tunnel skb, virtio_net_hdr_tnl_from_skb()
only initializes the first 10 bytes (sizeof(struct virtio_net_hdr)),
leaving bytes 10..23 (num_buffers and the hash/tunnel fields) as stack
garbage.

An unprivileged user can set the vnet header size to 24 with
TUNSETVNETHDRSZ, so __tun_vnet_hdr_put() copies all 24 bytes of the
partially-initialized struct to userspace, leaking 14 bytes of kernel
stack on every read of a non-tunnel packet.

Fix it the same way tun_get_user() already does by zeroing the whole
header right after declaration.

🎖@cveNotify

🚨 CVE-2026-52941
In the Linux kernel, the following vulnerability has been resolved:

net/smc: avoid NULL deref of conn->lnk in smc_msg_event tracepoint

The smc_msg_event tracepoint class, shared by smc_tx_sendmsg and
smc_rx_recvmsg, unconditionally dereferences smc->conn.lnk:

__string(name, smc->conn.lnk->ibname)

conn->lnk is only set for SMC-R; for SMC-D it is NULL. Other code on
these paths already handles this (e.g. !conn->lnk in
SMC_STAT_RMB_TX_SIZE_SMALL()). With the tracepoint enabled, the first
sendmsg()/recvmsg() on an SMC-D socket crashes:

Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [...]
RIP: 0010:strlen+0x1e/0xa0
Call Trace:
trace_event_raw_event_smc_msg_event (net/smc/smc_tracepoint.h:44)
smc_rx_recvmsg (net/smc/smc_rx.c:515)
smc_recvmsg (net/smc/af_smc.c:2859)
__sys_recvfrom (net/socket.c:2315)
__x64_sys_recvfrom (net/socket.c:2326)
do_syscall_64

The faulting address 0x3e0 is offsetof(struct smc_link, ibname),
confirming the NULL ->lnk deref. Enabling the tracepoint requires
root, but the trigger itself is unprivileged: socket(AF_SMC, ...) has
no capability check, and SMC-D negotiation needs no admin step on
s390 or on x86 with the loopback ISM device loaded.

Log an empty device name for SMC-D instead of dereferencing NULL.

🎖@cveNotify

🚨 CVE-2026-52942
In the Linux kernel, the following vulnerability has been resolved:

netfilter: nf_log: validate MAC header was set before dumping it

The fallback path of dump_mac_header() guards the MAC header access
only with "skb->mac_header != skb->network_header", without checking
skb_mac_header_was_set(). When the MAC header is unset, mac_header is
0xffff, so the test passes and skb_mac_header(skb) returns
skb->head + 0xffff, ~64 KiB past the buffer; the loop then reads
dev->hard_header_len bytes out of bounds into the kernel log.

This is reachable via the netdev logger: nf_log_unknown_packet() calls
dump_mac_header() unconditionally, and an skb sent through AF_PACKET
with PACKET_QDISC_BYPASS reaches the egress hook with mac_header still
unset (__dev_queue_xmit(), which would reset it, is bypassed).

Add the skb_mac_header_was_set() check the ARPHRD_ETHER path already
uses, and replace the open-coded MAC header length test with
skb_mac_header_len(). Only skbs with an unset MAC header are affected;
valid ones are dumped as before.

BUG: KASAN: slab-out-of-bounds in dump_mac_header (net/netfilter/nf_log_syslog.c:831)
Read of size 1 at addr ffff88800ea49d3f by task exploit/148
Call Trace:
kasan_report (mm/kasan/report.c:595)
dump_mac_header (net/netfilter/nf_log_syslog.c:831)
nf_log_netdev_packet (net/netfilter/nf_log_syslog.c:938 net/netfilter/nf_log_syslog.c:963)
nf_log_packet (net/netfilter/nf_log.c:260)
nft_log_eval (net/netfilter/nft_log.c:60)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_netdev (net/netfilter/nft_chain_filter.c:307)
nf_hook_slow (net/netfilter/core.c:619)
nf_hook_direct_egress (net/packet/af_packet.c:257)
packet_xmit (net/packet/af_packet.c:280)
packet_sendmsg (net/packet/af_packet.c:3114)
__sys_sendto (net/socket.c:2265)

🎖@cveNotify

🚨 CVE-2026-52943
In the Linux kernel, the following vulnerability has been resolved:

net: skbuff: fix missing zerocopy reference in pskb_carve helpers

pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy
the old skb_shared_info header into a new buffer via memcpy(), which
includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs.
Neither function calls net_zcopy_get() for the new shinfo, creating an
unaccounted holder: every skb_shared_info with destructor_arg set will
call skb_zcopy_clear() once when freed, but the corresponding
net_zcopy_get() was never called for the new copy. Repeated calls
drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while
TX skbs still hold live destructor_arg pointers.

KASAN reports use-after-free on a freed ubuf_info_msgzc:

BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810
Read of size 8 at addr ffff88801574d3e8 by task poc/220

Call Trace:
skb_release_data+0x77b/0x810
kfree_skb_list_reason+0x13e/0x610
skb_release_data+0x4cd/0x810
sk_skb_reason_drop+0xf3/0x340
skb_queue_purge_reason+0x282/0x440
rds_tcp_inc_free+0x1e/0x30
rds_recvmsg+0x354/0x1780
__sys_recvmsg+0xdf/0x180

Allocated by task 219:
msg_zerocopy_realloc+0x157/0x7b0
tcp_sendmsg_locked+0x2892/0x3ba0

Freed by task 219:
ip_recv_error+0x74a/0xb10
tcp_recvmsg+0x475/0x530

The skb consuming the late access still referenced the same uarg via
shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without
a refcount bump. This has been verified to be reliably exploitable: a
working proof-of-concept achieves full root privilege escalation from
an unprivileged local user on a default kernel configuration.

The fix follows the pattern of pskb_expand_head() which has the same
memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get()
is placed after skb_orphan_frags() succeeds, so the orphan error path
needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is
placed after all failure points and just before skb_release_data(), so
no error path needs cleanup at all -- matching pskb_expand_head() more
closely and avoiding the need for a balancing net_zcopy_put().

🎖@cveNotify

🚨 CVE-2026-53158
In the Linux kernel, the following vulnerability has been resolved:

misc: fastrpc: Fix NULL pointer dereference in rpmsg callback

A NULL pointer dereference was observed on Hawi at boot when the DSP
sends a glink message before fastrpc_rpmsg_probe() has completed
initialization:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000178
pc : _raw_spin_lock_irqsave+0x34/0x8c
lr : fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc]
...
Call trace:
_raw_spin_lock_irqsave+0x34/0x8c (P)
fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc]
qcom_glink_native_rx+0x538/0x6a4
qcom_glink_smem_intr+0x14/0x24 [qcom_glink_smem]

The faulting address 0x178 corresponds to the lock variable inside
struct fastrpc_channel_ctx, confirming that cctx is NULL when
fastrpc_rpmsg_callback() attempts to take the spinlock.

There are two issues here. First, dev_set_drvdata() is called before
spin_lock_init() and idr_init(), leaving a window where the callback
can retrieve a valid cctx pointer but operate on an uninitialized
spinlock. Second, the rpmsg channel becomes live as soon as the driver
is bound, so fastrpc_rpmsg_callback() can fire before dev_set_drvdata()
is called at all, resulting in dev_get_drvdata() returning NULL.

Fix both issues by moving all cctx initialization ahead of
dev_set_drvdata() so the structure is fully initialized before it
becomes visible to the callback, and add a NULL check in
fastrpc_rpmsg_callback() as a guard against any remaining window.

🎖@cveNotify

🚨 CVE-2026-53159
In the Linux kernel, the following vulnerability has been resolved:

misc: fastrpc: fix DMA address corruption due to find_vma misuse

fastrpc_get_args() uses find_vma() to look up the VMA for a user-provided
pointer and compute a DMA address offset. When the address falls in a gap
before the returned VMA, (ptr & PAGE_MASK) - vma->vm_start underflows,
corrupting the DMA address sent to the DSP.

Replace find_vma() with vma_lookup(), which returns NULL when the address
is not contained within any VMA.

🎖@cveNotify

🚨 CVE-2026-58521
Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in The Wikimedia Foundation Mediawiki - Cargo Extension allows SQL Injection.

This issue affects Mediawiki - Cargo Extension: from * before 1.43.9,1.44.6,1.45.4.

🎖@cveNotify

🚨 CVE-2026-14363
Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in The Wikimedia Foundation Mediawiki - Cargo Extension allows SQL Injection.

This issue affects Mediawiki - Cargo Extension: from * before 1.43.9,1.44.6,1.45.4.

🎖@cveNotify

🚨 CVE-2026-40139
A critical pre-authentication vulnerability exists in the authentication subsystem of BeyondTrust Remote Support. Improper processing of authentication requests may allow an unauthenticated remote attacker to bypass access controls and gain unauthorized access to the appliance, including accounts with elevated privileges. Exploitation requires a specific authentication configuration to be enabled.

🎖@cveNotify

🚨 CVE-2026-40140
BeyondTrust Remote Support and Privileged Remote Access contain a high-severity pre-authentication vulnerability in the network communication subsystem. Insufficient validation of client-supplied input may allow an unauthenticated remote attacker to trigger a denial-of-service condition affecting appliance availability.

🎖@cveNotify

🚨 CVE-2026-40141
A high-severity vulnerability exists in a web application component of BeyondTrust Remote Support and Privileged Remote Access related to the processing of certain input parameters. Insufficient validation of user-supplied input may allow an authenticated attacker with limited privileges to access unintended resources or data beyond their authorization scope. Exploitation is restricted to accounts with specific permissions.

🎖@cveNotify

🚨 CVE-2026-41514
OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 4.5.0 and prior to version 4.11.0, the RSA-OAEP decryption implementation in the Hisilicon HPRE crypto driver uses non-constant-time `memcmp()` for label hash verification and has multiple distinguishable error paths. This creates a Manger-style padding oracle that allows an attacker to recover RSA-OAEP plaintext with approximately 1000-2000 adaptive chosen ciphertext queries. Only affects plat-d06 with `CFG_HISILICON_ACC_V3=y`, which seems to be disabled by default. Version 4.11.0 contains a patch. As a workaround, disable Hisilicon HPRE RSA driver with `CFG_HISILICON_ACC_V3=n`.

🎖@cveNotify

🚨 CVE-2021-30004
In wpa_supplicant and hostapd 2.9, forging attacks may occur because AlgorithmIdentifier parameters are mishandled in tls/pkcs1.c and tls/x509v3.c.

🎖@cveNotify

🚨 CVE-2022-30065
A use-after-free in Busybox 1.35-x's awk applet leads to denial of service and possibly code execution when processing a crafted awk pattern in the copyvar function.

🎖@cveNotify

🚨 CVE-2026-5530
A flaw has been found in Ollama up to 0.18.1. This issue affects some unknown processing of the file server/download.go of the component Model Pull API. Executing a manipulation can lead to server-side request forgery. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2026-40500
ProcessWire CMS version 3.0.255 and prior contain a server-side request forgery vulnerability in the admin panel's 'Add Module From URL' feature that allows authenticated administrators to supply arbitrary URLs to the module download parameter, causing the server to issue outbound HTTP requests to attacker-controlled internal or external hosts. Attackers can exploit differentiable error messages returned by the server to perform reliable internal network port scanning, host enumeration across RFC-1918 ranges, and potential access to cloud instance metadata endpoints.

🎖@cveNotify

🚨 CVE-2026-42010
A flaw was found in gnutls. Servers configured with RSA-PSK (Rivest–Shamir–Adleman – Pre-Shared Key) wrongfully matched usernames containing a NUL character with truncated usernames. A remote attacker could exploit this by sending a specially crafted username, leading to an authentication bypass. This vulnerability allows an attacker to gain unauthorized access by circumventing the authentication process.

🎖@cveNotify

🚨 CVE-2026-42009
A flaw was found in gnutls. A remote attacker could exploit an issue in the Datagram Transport Layer Security (DTLS) packet reordering logic. The comparator function, responsible for ordering DTLS packets by sequence numbers, did not correctly handle packets with duplicate sequence numbers. This could lead to unstable packet ordering or undefined behavior, resulting in a denial of service.

🎖@cveNotify

🚨 CVE-2026-11774
An integer overflow flaw was found in the SASL I/O layer of 389 Directory Server (389-ds-base). In sasl_io_start_packet(), adding sizeof(uint32_t) to a crafted SASL packet length prefix of 0xFFFFFFFC causes unsigned wraparound to zero, bypassing the nsslapd-maxsasliosize limit and leading to a heap buffer overflow of up to approximately 2 megabytes of attacker-controlled data. After a successful SASL bind with integrity protection (SSF > 0), a remote attacker can cause a Denial of Service (DoS) or achieve Remote Code Execution (RCE). In FreeIPA and Red Hat Identity Management deployments, any domain user with a valid Kerberos ticket, enrolled host, or service account can trigger this vulnerability over the network. This flaw is independent of CVE-2025-14905, which patched schema.c only and did not modify sasl_io.c.

🎖@cveNotify