🚨 CVE-2026-53164
In the Linux kernel, the following vulnerability has been resolved:

iommu/dma: Do not try to iommu_map a 0 length region in swiotlb

iommu_dma_iova_link_swiotlb() processes a mapping that is unaligned in three
parts, the head, middle and trailer. If the middle is empty because there
are no aligned pages it will call down to iommu_map() with a 0 size
which the iommupt implementation will fail as illegal.

It then tries to do an error unwind and starts from the wrong spot
corrupting the mapping so the eventual destruction triggers a WARN_ON.

Check for 0 length and avoid mapping and use offset not 0 as the starting
point to unlink.

This is frequently triggered by using some kinds of thunderbolt NVMe
drives that trigger forced SWIOTLB for unaligned memory. NVMe seems to
pass in oddly aligned buffers for the passthrough commands from smartctl
that hit this condition.

🎖@cveNotify

🚨 CVE-2026-53165
In the Linux kernel, the following vulnerability has been resolved:

iomap: avoid potential null folio->mapping deref during error reporting

When a buffered read fails, iomap_finish_folio_read() reports the error
with fserror_report_io(folio->mapping->host, ...). This is called after
ifs->read_bytes_pending has been decremented by the bytes attempted to
be read.

For a folio split across multiple read completions, the folio is only
guaranteed to stay locked while read_bytes_pending > 0. Once
iomap_finish_folio_read() decrements read_bytes_pending, another
in-flight read can complete and end the read on the folio, which unlocks
it. This allows truncate logic to run and detach the folio (set
folio->mapping to NULL). The error reporting path then can dereference a
NULL folio->mapping. As reported by Sam Sun, this is the race that can
occur:

CPU0: failed completion CPU1: final completion CPU2: truncate
----------------------- ---------------------- --------------
read_bytes_pending -= len
finished = false
/* preempted before
fserror_report_io() */
read_bytes_pending -= len
finished = true
folio_end_read()
truncate clears
folio->mapping
fserror_report_io(
folio->mapping->host, ...)
^ NULL deref

Fix this by reporting the error first before decrementing
ifs->read_bytes_pending.

🎖@cveNotify

🚨 CVE-2026-53166
In the Linux kernel, the following vulnerability has been resolved:

futex/requeue: Prevent NULL pointer dereference in remove_waiter() on self-deadlock

When FUTEX_CMP_REQUEUE_PI requeues a non-top waiter that already owns the
target PI futex, task_blocks_on_rt_mutex() returns -EDEADLK before setting
waiter->task.

The subsequent remove_waiter() in rt_mutex_start_proxy_lock() dereferences
the NULL waiter->task, causing a kernel crash.

Add a self-deadlock check for non-top waiters before calling
rt_mutex_start_proxy_lock(), analogous to the top-waiter check in
futex_lock_pi_atomic().

🎖@cveNotify

🚨 CVE-2026-53232
In the Linux kernel, the following vulnerability has been resolved:

net: phy: clean the sfp upstream if phy probing fails

Sashiko reported that we don't call sfp_bus_del_upstream() in the probe
failure path, so let's add it, otherwise the sfp-bus is left with a
dangling 'upstream' field, that may be used later on during SFP events.

This issue existed before the generic phylib sfp support, back when
drivers were calling phy_sfp_probe themselves.

🎖@cveNotify

🚨 CVE-2026-4360
In the Tarfile.extract() function, the filter parameter is not passed properly when extracting hardlinks. An affected system that extracts content from untrusted tar files could end up writing files with an unexpected uid/gid despite the user passing filter='data' to the extract() function.

🎖@cveNotify

🚨 CVE-2026-58381
A flaw was found in GIMP's PSP file format parser. A double-free condition occurs in the read_layer_block() function when processing a specially crafted PSP file. This could allow an attacker to cause memory corruption, potentially leading to denial of service or arbitrary code execution.

🎖@cveNotify

🚨 CVE-2026-58578
LobeChat before version 2.2.10-canary.15 contains a regular expression denial of service (ReDoS) vulnerability that allows authenticated attackers to block the Node.js event loop by supplying a catastrophic-backtracking pattern in a GitHub repository URL path during skill import. Attackers can craft a malicious basePath value containing unescaped regex metacharacters such as catastrophic-backtracking patterns, which are injected into a dynamically constructed regular expression in the findSkillMd function and executed synchronously against archive entries, denying service to all concurrent users for tens of seconds per request.

🎖@cveNotify

🚨 CVE-2026-59095
LobeChat before 2.2.10-canary.18 contains a server-side request forgery vulnerability that allows authenticated attackers to direct internal HTTP requests to arbitrary URLs by supplying user-controlled input to the skill import service (importFromUrl) and topic cover update (fetchImageFromUrl) endpoints, which use the global fetch without the project's ssrf-safe-fetch wrapper. Attackers can target internal addresses such as cloud instance metadata endpoints through these unprotected code paths to disclose internal service responses and cloud credentials.

🎖@cveNotify

🚨 CVE-2026-59101
AutoBangumi before 3.2.8 contains a server-side request forgery (SSRF) vulnerability that allows unauthenticated remote attackers to probe internal network services by supplying arbitrary host values to an unprotected setup endpoint. Attackers can send requests to the POST /api/v1/setup/test-downloader endpoint during the initial setup window, causing the server to issue HTTP GET requests to internal or reserved addresses and leak information through echoed connection-error messages.

🎖@cveNotify

🚨 CVE-2026-12413
An invalidly formatted IKEv2 fragment causes the Libreswan pluto daemon to crash and restart. Continued exploitation would cause a denial of service. The function reassemble_v2_incoming_fragments() would ignore unknown outer payloads but still store these in a fixed size array msg_digest.digest[PAYLIMIT]. An off-by-one error in the assertion PASSERT(logger, md->digest_roof < elemsof(md->digest)) causes the daemon to abort. No remote code execution is possible. Any configuration that allows IKEv2 connections that do not set fragmentation=no are vulnerable. IKEv1 is not affected.

🎖@cveNotify

🚨 CVE-2026-50721
Libreswan, via the function RSA_authenticate_hash_signature_raw_rsa(), did not correctly verify the length of the authentication hash when the SIG payload of an IKEv1 packet was encoded using PKCS #1 RSA Encryption as per RFC 2313. A remote attacker can use a variation on the Bleichenbacher attack to forge the SIG payload when small public exponents are being used (e.g., e=3), which could lead to impersonation. Additionally, a remote attacker, by encoding a shorter than expected hash in the SIG payload, could trigger an assertion leading to denial-of-service. The daemon aborts and restarts; continued exploitation causes sustained denial of service. Remote code execution is not possible. X.509 certificate verifications of remote IKE peers are not affected.

🎖@cveNotify

🚨 CVE-2026-13371
An authenticated administrator can trigger a denial-of-service condition in the Fireware Management Web UI by sending malformed or crafted data to the put_data endpoint, which performs unsafe deserialization of the attacker-supplied input.

🎖@cveNotify

🚨 CVE-2026-13374
Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in WatchGuard Fireware OS (ConnectWise Technology Integration module) allows Stored XSS. This vulnerability is an additional unmitigated attack path for CVE-2025-13937.


This issue affects Fireware OS 12.4 up to and including 12.12, 12.5 up to and including 12.5.18, and 2025.1 up to and including 2026.2.

🎖@cveNotify

🚨 CVE-2026-13375
Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in WatchGuard Fireware OS (Autotask Technology Integration module) allows Stored XSS. This vulnerability is an additional unmitigated attack path for CVE-2025-13938.


This issue affects Fireware OS 12.4 up to and including 12.12, 12.5 up to and including 12.5.18, and 2025.1 up to and including 2026.2.

🎖@cveNotify

🚨 CVE-2026-12731
The weDocs: AI Powered Knowledge Base, Docs, Documentation, Wiki & AI Chatbot plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'sectionTitleTag' and 'articleTitleTag' Block Attributes in all versions up to, and including, 2.3.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

🎖@cveNotify

🚨 CVE-2026-13040
The NEX-Forms – Ultimate Forms Plugin for WordPress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'real_val__' parameter in all versions up to, and including, 9.2.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The submission endpoint is registered via wp_ajax_nopriv_submit_nex_form with no nonce verification, making it fully accessible to unauthenticated attackers without any CSRF token.

🎖@cveNotify

🚨 CVE-2026-9725
The Printcart Web to Print Product Designer for WooCommerce plugin for WordPress is vulnerable to Arbitrary File Deletion in versions up to, and including, 2.5.2 This is due to insufficient path validation in the store_design_data() function, which constructs a filesystem path from the user-supplied 'nbd_item_key' POST parameter sanitized only with sanitize_text_field() — which does not strip path traversal sequences — and then passes that path directly to Nbdesigner_IO::delete_folder() and PHP's rename(). The nonce protecting the nbd_save_customer_design AJAX action is freely obtainable by unauthenticated users via the nbd_check_use_logged_in endpoint. This makes it possible for unauthenticated attackers to delete arbitrary files on the affected site's server which may make remote code execution possible.

🎖@cveNotify

🚨 CVE-2026-10536
A use-after-free vulnerability exists in libcurl when an application
configures an HTTP/2 stream-dependency tree via `CURLOPT_STREAM_DEPENDS` or
`CURLOPT_STREAM_DEPENDS_E`, subsequently invokes `curl_easy_reset()`, and
finally terminates the handle with `curl_easy_cleanup()`. During this final
cleanup phase, libcurl attempts to access and modify an internal structure
that was already freed during the reset operation.

🎖@cveNotify

🚨 CVE-2026-11352
An issue in curl’s QUIC UDP receive function allows a malicious HTTP/3 server
to trigger a remote denial of service against a curl or libcurl client.
Because the helper function discards zero-length UDP datagrams before counting
them toward the per-call packet budget, a connected QUIC peer can continuously
stream empty datagrams to indefinitely stall the client.

🎖@cveNotify

🚨 CVE-2026-11564
libcurl keeps previously used connections in a connection pool for subsequent
transfers to reuse if one of them matches the setup.

An easy handle that first uses default native CA trust can continue trusting
the native platform store after the application switches that same handle to
custom CA material for a later transfer.

🎖@cveNotify

🚨 CVE-2026-11586
By default, curl automatically responds to WebSocket PING frames. Because curl
lacks an upper bound on memory allocation for unacknowledged frames, a
malicious server can exhaust all available memory by flooding curl with rapid,
sequential PING messages.

🎖@cveNotify