🚨 CVE-2026-58293
External control of file name or path in Microsoft Edge (Chromium-based) allows an unauthorized attacker to execute code over a network.

🎖@cveNotify

🚨 CVE-2026-58294
Use after free in Microsoft Edge (Chromium-based) allows an unauthorized attacker to execute code over a network.

🎖@cveNotify

🚨 CVE-2026-58295
Access of resource using incompatible type ('type confusion') in Microsoft Edge (Chromium-based) allows an unauthorized attacker to bypass a security feature over a network.

🎖@cveNotify

🚨 CVE-2025-49795
A NULL pointer dereference vulnerability was found in libxml2 when processing XPath XML expressions. This flaw allows an attacker to craft a malicious XML input to libxml2, leading to a denial of service.

🎖@cveNotify

🚨 CVE-2026-11774
An integer overflow flaw was found in the SASL I/O layer of 389 Directory Server (389-ds-base). In sasl_io_start_packet(), adding sizeof(uint32_t) to a crafted SASL packet length prefix of 0xFFFFFFFC causes unsigned wraparound to zero, bypassing the nsslapd-maxsasliosize limit and leading to a heap buffer overflow of up to approximately 2 megabytes of attacker-controlled data. After a successful SASL bind with integrity protection (SSF > 0), a remote attacker can cause a Denial of Service (DoS) or achieve Remote Code Execution (RCE). In FreeIPA and Red Hat Identity Management deployments, any domain user with a valid Kerberos ticket, enrolled host, or service account can trigger this vulnerability over the network. This flaw is independent of CVE-2025-14905, which patched schema.c only and did not modify sasl_io.c.

🎖@cveNotify

🚨 CVE-2026-58593
NodeBB does not bind the claimed author of an inbound ActivityPub object to the authenticated remote actor. The inbound middleware verifies the HTTP-signature actor and checks the origin of object.id, but never validates that attributedTo corresponds to the sender. In the object mock, attributedTo is used directly as a uid, and actors.assert silently ignores numeric identifiers (filtering them out without re-deriving the uid), so a federated remote actor can set attributedTo to a bare numeric value such as 1 and have the resulting post or private message created with that local uid as author, including the administrator account. This lets a remote attacker forge posts and direct messages attributed to arbitrary local users. Requires the ActivityPub/federation feature to be enabled.

🎖@cveNotify

🚨 CVE-2026-57977
Improper neutralization of input during web page generation ('cross-site scripting') in Microsoft Edge (Chromium-based) allows an unauthorized attacker to perform spoofing over a network.

🎖@cveNotify

🚨 CVE-2026-49098
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel Kafka Component.

The camel-kafka producer can override its configured target topic at runtime from the kafka.OVERRIDE_TOPIC Exchange header: KafkaProducer.evaluateTopic() returns the header value in preference to the topic configured on the endpoint. The control-header constants in KafkaConstants (for example OVERRIDE_TOPIC = kafka.OVERRIDE_TOPIC, OVERRIDE_TIMESTAMP = kafka.OVERRIDE_TIMESTAMP, PARTITION_KEY = kafka.PARTITION_KEY) used plain, non-Camel-prefixed values. camel-kafka's own KafkaHeaderFilterStrategy does filter the kafka.* namespace, but only on the Kafka-to-Exchange serialization boundary (reading Kafka record headers into the Exchange, and writing Exchange headers into a Kafka record); it does not apply to headers that arrive from an upstream consumer in a multi-component route. The upstream HTTP consumer uses HttpHeaderFilterStrategy, which blocks only the Camel / camel namespace, so a kafka.* header passes through unfiltered. As a result, in a route that bridges an HTTP consumer (for example platform-http) into a kafka: producer, any HTTP client could set the kafka.OVERRIDE_TOPIC header and cause the message to be published to an arbitrary Kafka topic instead of the configured one - redirecting it to a sensitive internal topic, or injecting attacker-crafted messages into a topic consumed by a critical downstream service. The related kafka.OVERRIDE_TIMESTAMP and kafka.PARTITION_KEY headers could likewise be injected to backdate messages or target specific partitions. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set or read Kafka headers via the raw header names must use the CamelKafka* names (for example CamelKafkaOverrideTopic and CamelKafkaTopic) instead of the old kafka.* values. For deployments that cannot upgrade immediately, strip the kafka.* headers from any untrusted ingress before the kafka: producer (for example removeHeaders('kafka.*') at the start of the route), and set the target topic from a trusted source.

🎖@cveNotify

🚨 CVE-2026-49099
Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Salesforce Component.

The camel-salesforce producer resolves its operation parameters - the SOQL query, the SOSL search, the target SObject name and id, the Apex REST URL and method, and the Apex query parameters - from Exchange message headers, reading the header in preference to the value configured on the endpoint (AbstractSalesforceProcessor.getParameter() reads the header first and uses the endpoint configuration only as a fallback). The control-header constants in SalesforceEndpointConfig (for example SOBJECT_QUERY = sObjectQuery, SOBJECT_SEARCH = sObjectSearch, SOBJECT_NAME = sObjectName, SOBJECT_ID = sObjectId, APEX_URL = apexUrl, APEX_METHOD = apexMethod, and the apexQueryParam. prefix) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a salesforce: producer, any HTTP client could therefore set these headers and override what the route intended - supplying its own SOQL query or SOSL search to read data from any SObject the connected Salesforce user can access, overriding the target SObject name and id for CRUD operations, or redirecting an Apex REST call to a different endpoint and HTTP method (including destructive methods) with injected query parameters. All such operations run with the full permissions of the Salesforce connected (integration) user, which is typically broad. No credentials are required from the attacker when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Salesforce operation parameters via the raw header names must use the CamelSalesforce* names (for example CamelSalesforceSObjectQuery and CamelSalesforceApexUrl) instead of the old sObject* / apex* values; the endpoint-option spelling is unchanged. For deployments that cannot upgrade immediately, strip the Salesforce control headers from any untrusted ingress before the salesforce: producer (for example removeHeaders('sObject*') and removeHeaders('apex*') at the start of the route), and set the query, SObject and Apex parameters from a trusted source.

🎖@cveNotify

🚨 CVE-2026-49365
Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Netty HTTP component.

The camel-netty-http HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false because the backing field was an uninitialised primitive boolean (Java's default of false), whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain (via DefaultNettyHttpBinding) instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application's internal structure, which an attacker can use to plan further attacks.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-netty-http consumer (for example netty-http: http://0.0.0.0:8080/api?muteException=true , or globally via the camel.component.netty-http.configuration.mute-exception=true property), so that processing errors no longer return the stack trace to the client.

🎖@cveNotify

🚨 CVE-2026-53913
Improper Authentication, Missing Authentication for Critical Function, Not Failing Securely ('Failing Open') vulnerability in Apache Camel Keycloak Component.

The KeycloakSecurityPolicy of camel-keycloak guards a route by running KeycloakSecurityProcessor.beforeProcess(), which performs three checks in sequence: it rejects a request that carries no access token, then - only if requiredRoles is non-empty - validates the roles, and - only if requiredPermissions is non-empty - validates the permissions. The actual cryptographic verification of the bearer access token (signature, issuer and expiry for a local JWT, or active-state and issuer for token introspection) is performed exclusively inside those role and permission checks. KeycloakSecurityPolicy defaults requiredRoles and requiredPermissions to empty - which is the documented 'Basic Setup' - so on a route configured that way the role and permission checks are skipped and the access token is therefore never verified. The token-presence check still rejects a missing token, but an invalid token is accepted: any non-null value in the Authorization: Bearer header - including an arbitrary string or a forged, unsigned JWT - passes the policy and the request reaches the protected route, with no signature, issuer or expiry check and no request to Keycloak. The token is read from the inbound request header because allowTokenFromHeader defaults to true. Because the normal reason to place a route behind this policy is that the route performs server-side work, the bypass results in unauthenticated access to that work; where the protected route forwards to a code-execution-capable producer, it can result in unauthenticated remote code execution. This defect is independent of CVE-2026-23552: that issue concerned the issuer claim and was fixed by adding a check inside the verification routine, but here the verification routine is not reached at all in the default configuration, so the defect remains.
This issue affects Apache Camel: from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, configure a non-empty requiredRoles or requiredPermissions on every KeycloakSecurityPolicy so that the token-verification path is exercised, set allowTokenFromHeader to false where the token is not expected from the request header, or perform token verification at the framework layer ahead of the policy.

🎖@cveNotify

🚨 CVE-2026-55993
Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Atmosphere Websocket Component.

The camel-atmosphere-websocket consumer mapped inbound WebSocket query parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (WebsocketConsumer.sendEventNotification() iterates the query-string map collected in WebsocketConsumer.service() and copies each entry into the Exchange). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the consumer apply the HeaderFilterStrategy it already inherits from the HTTP/servlet stack, filtering the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.

🎖@cveNotify

🚨 CVE-2026-14471
Improper Neutralization of Special Elements in the metrics-service retention policy management component in Amazon mcp-gateway-registry before 1.0.13 might allow an authenticated remote user to execute arbitrary SQL queries via a crafted table_name value that is interpolated into SQL statements in identifier position.



To remediate this issue, users should upgrade to version 1.0.13 or later.

🎖@cveNotify

🚨 CVE-2026-33734
FOSSBilling is a free, open-source billing and client management system. Versions 0.6.0 through 0.7.2 have a SQL injection vulnerability in the `Massmailer` module filter functionality. An authenticated administrator can supply crafted filter values when updating a mass email message, causing untrusted input to be interpolated directly into SQL in the recipient selection query. Version 0.8.0 patches the issue. Some workarounds are available. Restrict administrator access to trusted users only, disable the `Massmailer` module if it is not required, audit existing records in the `mod_massmailer` table for suspicious filter values, and/or review administrator activity related to `Massmailer` message updates.

🎖@cveNotify

🚨 CVE-2026-34038
Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to 4.0.0-beta.469, an authenticated remote command injection vulnerability in application deployment handling allows users with application write permissions to achieve remote code execution and exfiltrate sensitive environment variables through deployment logs via fields such as dockerfile_location and deployment commands. This issue is fixed in version 4.0.0-beta.469.

🎖@cveNotify

🚨 CVE-2026-42331
FOSSBilling is a free, open-source billing and client management system. Prior to version 0.8.0, the Guest API invoice/update endpoint is missing an authorization check present in other invoice-related endpoints, allowing an unauthenticated user with knowledge of an invoice hash to modify the payment gateway associated with an unpaid invoice. An attacker who obtains an invoice hash, which may leak through shared URLs, referrer headers, or email links, can change the `gateway_id` on an unpaid invoice to any payment gateway configured in the system. This does not allow redirecting payments to an arbitrary external endpoint, as the gateway must already be installed and configured by an administrator. The practical impact is further limited by the `invoice_accessible_from_hash` system setting. Version 0.8.0 contains a patch. No known workarounds are available.

🎖@cveNotify

🚨 CVE-2026-42341
FOSSBilling is a free, open-source billing and client management system. Versions 0.6.0 through 0.7.2 have an unauthenticated payment bypass vulnerability in FOSSBilling's IPN callback endpoint. When the Custom payment adapter is enabled, an attacker can mark any unpaid invoice as paid and credit the associated client account without making an actual payment, by sending a single crafted HTTP request. Version 0.8.0 patches the issue. Some workarounds are available. Disable the Custom payment gateway if not actively needed and/or restrict access to `/ipn.php` at the web server level (e.g., via IP allowlisting), noting that this may interfere with legitimate payment callback processing.

🎖@cveNotify

🚨 CVE-2026-48267
DNG SDK versions 1.7.1 2536 and earlier are affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

🎖@cveNotify

🚨 CVE-2026-32718
Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to 4.0.0-beta.466, mutating API validation endpoints are guarded by read ability, allowing read-scoped API tokens to perform state-changing operations such as validating cloud tokens and servers. This issue is fixed in version 4.0.0-beta.466.

🎖@cveNotify

🚨 CVE-2026-34049
Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. From 4.0.0-beta.451 through 4.0.0-beta.470, database backup handling for MongoDB collection names did not fully validate shell metacharacters, allowing a highly privileged attacker who can configure backup inputs to inject commands. This issue is fixed in version 4.0.0-beta.471.

🎖@cveNotify

🚨 CVE-2026-34050
Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to 4.0.0-beta.471, the Settings/Updates Livewire component does not check isInstanceAdmin in its mount method, allowing non-admin users to access the Updates settings page and potentially modify auto-update settings or trigger update checks. This issue is fixed in version 4.0.0-beta.471.

🎖@cveNotify