🚨 CVE-2026-58403
Hugo is a static site generator. From v0.123.0 through v0.163.0, Hugo's virtual filesystem is designed so that files under a mount cannot reach outside the mount tree, but a regression caused RootMappingFs.statRoot to call Stat, which follows symlinks, instead of Lstat, so a direct os.ReadFile "somefile" where somefile was a symlink pointing outside the mount would return the target's contents. This effectively let a symlink planted inside a theme or local mount read arbitrary files reachable to the user running hugo. This issue is fixed in v0.163.1.

🎖@cveNotify

🚨 CVE-2026-58404
Hugo is a static site generator. From v0.162.0 through v0.163.0, the default security.http.urls policy denies requests to loopback, internal, and cloud-metadata IPv4 literals, but the deny rule only matched dotted-decimal notation, so alternate IPv4 encodings of the same addresses, including integer, hex, or octal, passed the policy. When a template passes an untrusted or data-derived URL to resources.GetRemote and the host platform uses the cgo system resolver, these encodings resolve to the blocked address, allowing build-time server-side requests to loopback and internal services, including the cloud-metadata endpoint in hosted or CI builds; the same check is reused on redirects, so the gap also applies to each redirect hop. This issue is fixed in v0.163.1.

🎖@cveNotify

🚨 CVE-2026-59089
A flaw was found in GIMP. The PlayStation TIM loader, responsible for handling PlayStation image files, incorrectly calculates the size of the Color Look-Up Table (CLUT) due to an integer overflow. This occurs when multiplying num_colors and num_cluts, both 16-bit unsigned short integers, resulting in a value exceeding the maximum integer limit. An attacker could exploit this by providing a specially crafted image file, leading to undefined behavior and causing the GIMP plug-in to abort, effectively resulting in a denial of service.

🎖@cveNotify

🚨 CVE-2026-53301
In the Linux kernel, the following vulnerability has been resolved:

reset: amlogic: t7: Fix null reset ops

Fix missing reset ops causing kernel null pointer dereference.
This SOC's reset is currently not used yet.

🎖@cveNotify

🚨 CVE-2026-53302
In the Linux kernel, the following vulnerability has been resolved:

crypto: eip93 - fix hmac setkey algo selection

eip93_hmac_setkey() allocates a temporary ahash transform for
computing HMAC ipad/opad key material. The allocation uses the
driver-specific cra_driver_name (e.g. "sha256-eip93") but passes
CRYPTO_ALG_ASYNC as the mask, which excludes async algorithms.

Since the EIP93 hash algorithms are the only ones registered
under those driver names and they are inherently async, the
lookup is self-contradictory and always fails with -ENOENT.

When called from the AEAD setkey path, this failure leaves the
SA record partially initialized with zeroed digest fields. A
subsequent crypto operation then dereferences a NULL pointer in
the request context, resulting in a kernel panic:

```
pc : eip93_aead_handle_result+0xc8c/0x1240 [crypto_hw_eip93]
lr : eip93_aead_handle_result+0xbec/0x1240 [crypto_hw_eip93]
sp : ffffffc082feb820
x29: ffffffc082feb820 x28: ffffff8011043980 x27: 0000000000000000
x26: 0000000000000000 x25: ffffffc078da0bc8 x24: 0000000091043980
x23: ffffff8004d59e50 x22: ffffff8004d59410 x21: ffffff8004d593c0
x20: ffffff8004d593c0 x19: ffffff8004d4f300 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000007fda7aa498
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: fffffffff8127a80 x9 : 0000000000000000
x8 : ffffff8004d4f380 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : 0000000000000008 x3 : 0000000000000009
x2 : 0000000000000008 x1 : 0000000028000003 x0 : ffffff8004d388c0
Code: 910142b6 f94012e0 f9002aa0 f90006d3 (f9400740)
```

The reported symbol eip93_aead_handle_result+0xc8c is a
resolution artifact from static functions being merged under
the nearest exported symbol. Decoding the faulting sequence:

```
910142b6 ADD X22, X21, #0x50
f94012e0 LDR X0, [X23, #0x20]
f9002aa0 STR X0, [X21, #0x50]
f90006d3 STR X19, [X22, #0x8]
f9400740 LDR X0, [X26, #0x8]
```

The faulting LDR at [X26, #0x8] is loading ctx->flags
(offset 8 in eip93_hash_ctx), where ctx has been resolved
to NULL from a partially initialized or unreachable
transform context following the failed setkey.

Fix this by dropping the CRYPTO_ALG_ASYNC mask from the
crypto_alloc_ahash() call. The code already handles async
completion correctly via crypto_wait_req(), so there is no
requirement to restrict the lookup to synchronous algorithms.

Note that hashing a single 64-byte block through the hardware
is likely slower than doing it in software due to the DMA
round-trip overhead, but offloading it may still spare CPU
cycles on the slower embedded cores where this IP is found.

[Detailed investigation report of this bug]

🎖@cveNotify

🚨 CVE-2026-53303
In the Linux kernel, the following vulnerability has been resolved:

f2fs: protect extension_list reading with sb_lock in f2fs_sbi_show()

In f2fs_sbi_show(), the extension_list, extension_count and
hot_ext_count are read without holding sbi->sb_lock. If a concurrent
sysfs store modifies the extension list via f2fs_update_extension_list(),
the show path may read inconsistent count and array contents, potentially
leading to out-of-bounds access or displaying stale data.

Fix this by holding sb_lock around the entire extension list read
and format operation.

🎖@cveNotify

🚨 CVE-2026-53304
In the Linux kernel, the following vulnerability has been resolved:

scsi: sg: Resolve soft lockup issue when opening /dev/sgX

The parameter def_reserved_size defines the default buffer size reserved
for each Sg_fd and should be restricted to a range between 0 and 1,048,576
(see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the
function sg_proc_write_dressz enforces this limit, it is possible to bypass
it by directly modifying the module parameter as shown below, which then
causes a soft lockup:

echo -1 > /sys/module/sg/parameters/def_reserved_size
exec 4<> /dev/sg0

watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537]
Modules loaded:
CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134,
PREEMPT disabled
Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version
1.16.1-2.fc37 dated 04/01/2014
...
Call Trace:

sg_build_reserve+0x5c/0xa0
sg_add_sfp+0x168/0x270
sg_open+0x16e/0x340
chrdev_open+0xbe/0x230
do_dentry_open+0x175/0x480
vfs_open+0x34/0xf0
do_open+0x265/0x3d0
path_openat+0x110/0x290
do_filp_open+0xc3/0x170
do_sys_openat2+0x71/0xe0
__x64_sys_openat+0x6d/0xa0
do_syscall_64+0x62/0x310
entry_SYSCALL_64_after_hwframe+0x76/0x7e

The fix is to use module_param_cb to validate and reject invalid values
assigned to def_reserved_size.

🎖@cveNotify

🚨 CVE-2026-53305
In the Linux kernel, the following vulnerability has been resolved:

usb: typec: ps883x: Fix Oops at unbind

When trying to unbind a device in order to bind to it vfio-platform as:

echo bc0000.geniqup > /sys/bus/platform/devices/bc0000.geniqup/driver/unbind

I get the following Oops:

[ 436.478639] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
[ 436.487762] Mem abort info:
[ 436.490716] ESR = 0x0000000096000004
[ 436.494595] EC = 0x25: DABT (current EL), IL = 32 bits
[ 436.500071] SET = 0, FnV = 0
[ 436.503250] EA = 0, S1PTW = 0
[ 436.506505] FSC = 0x04: level 0 translation fault
[ 436.511533] Data abort info:
[ 436.514558] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 436.520215] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 436.525436] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 436.530918] user pgtable: 4k pages, 48-bit VAs, pgdp=00000008861a9000
[ 436.537554] [0000000000000020] pgd=0000000000000000, p4d=0000000000000000
[ 436.544548] Internal error: Oops: 0000000096000004 [#1] SMP
[ 436.550374] Modules linked in:
[ 436.553542] CPU: 2 UID: 0 PID: 671 Comm: bash Tainted: G W 7.0.0-rc3-g56fcdd0911a5-dirty #2 PREEMPT
[ 436.564440] Tainted: [W]=WARN
[ 436.567515] Hardware name: LENOVO 91B6CTO1WW/3796, BIOS O6NKT3BA 05/02/2025
[ 436.574675] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 436.581841] pc : ps883x_retimer_remove+0x14/0x94
[ 436.586605] lr : i2c_device_remove+0x28/0x84
[ 436.591017] sp : ffff8000847137c0

That's because the ps883x_retimer_remove() retrieves the driver data
from i2c_get_clientdata() which was never set at probe. So, add
i2c_set_clientdata() at the end of the probe.

🎖@cveNotify

🚨 CVE-2026-13455
PostgreSQL Anonymizer contains a vulnerability that allows unprivileged masked users to repeatedly call the anon.hash() function and collects (seed, hash_output) pairs to perform an offline brute-force attack and deduce the salt. The problem is resolved in PostgreSQL Anonymizer 3.1.2 and later versions

🎖@cveNotify

🚨 CVE-2026-58519
Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in The Wikimedia Foundation Mediawiki - Cargo Extension allows Stored XSS.

This issue affects Mediawiki - Cargo Extension: from * before 3.9.1.

🎖@cveNotify

🚨 CVE-2026-13323
In Open VSX Registry before 1.0.2, the /vscode/unpkg/ endpoint serves user-supplied HTML files with Content-Type: text/html and without a Content-Security-Policy or Content-Disposition: attachment response header. An unauthenticated attacker can register a publisher account, upload a VSIX containing a crafted HTML payload, and induce an authenticated user to visit the resulting URL. The browser renders the file inline in the open-vsx.org origin context, enabling session token exfiltration, persistent Personal Access Token (PAT) generation, and unauthorized publication of malicious extension versions. Because Open VSX extensions are distributed to VS Code, VSCodium, Cursor, Windsurf, and compatible editors, a compromised extension update constitutes a supply chain attack against all downstream users.

🎖@cveNotify

🚨 CVE-2026-58521
Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in The Wikimedia Foundation Mediawiki - Cargo Extension allows SQL Injection.

This issue affects Mediawiki - Cargo Extension: from * before 1.43.9,1.44.6,1.45.4.

🎖@cveNotify

🚨 CVE-2026-41121
Dell Device Management Agent, versions prior to DDMA 26.05, contain an Improper Link Resolution Before File Access ('Link Following’) vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges.

🎖@cveNotify

🚨 CVE-2026-58288
Use after free in Microsoft Edge (Chromium-based) allows an unauthorized attacker to execute code over a network.

🎖@cveNotify

🚨 CVE-2026-2100
A flaw was found in p11-kit. A remote attacker could exploit this vulnerability by calling the C_DeriveKey function on a remote token with specific IBM kyber or IBM btc derive mechanism parameters set to NULL. This could lead to the RPC-client attempting to return an uninitialized value, potentially resulting in a NULL dereference or undefined behavior. This issue may cause an application level denial of service or other unpredictable system states.

🎖@cveNotify

🚨 CVE-2026-14606
A security flaw has been discovered in RT-Thread up to 5.0.2. Affected by this issue is the function CAN_Receive in the library bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/SWM341.h of the component SWM341 CAN Handler. Performing a manipulation results in stack-based buffer overflow. The attack needs to be approached locally. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2026-22555
Gitea versions before 1.26.0 allow API users to fork a repository into an organization without first passing the CanCreateOrgRepo check, which can expose organization secrets.

🎖@cveNotify

🚨 CVE-2025-71347
picklescan before 0.0.33 fails to detect malicious pickle files using numpy.f2py.crackfortran.param_eval function in reduce methods, allowing attackers to bypass security checks. Remote attackers can embed undetected code in pickle files that executes during deserialization, enabling arbitrary code execution in applications loading untrusted pickle data.

🎖@cveNotify

🚨 CVE-2026-24012
Uncontrolled Resource Consumption vulnerability in Apache IoTDB. 

Some interface fails to impose reasonable
limits on the time span and aggregation interval of the query. An attacker
can construct a request with extreme parameters (e.g., a very large time
range combined with a minimal interval). This forces the DataNode to build
an enormous result set in memory, which exhausts the Java heap and causes
the DataNode process to crash.

This issue affects Apache IoTDB: from 1.3.3 before 2.0.8.

Users are recommended to upgrade to version 2.0.8, which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-24013
Authentication Bypass by Spoofing vulnerability in Apache IoTDB.
Certain Thrift RPC query handlers lack strict validation of the sessionId
parameter. An attacker can construct requests with a forged sessionId and,
without performing openSession authentication, receive valid query results.
This allows authentication bypass and unauthorized reading of time-series
data.


This issue affects Apache IoTDB: from 1.3.3 before 2.0.8.

Users are recommended to upgrade to version 2.0.8, which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-24014
Apache IoTDB DataNode’s internal RPC interface for creating Trigger instances uses the uploaded Trigger JAR name to build a file path without sufficient validation. If the internal DataNode RPC port is exposed to an untrusted network, an attacker may use path traversal sequences in the JAR name to write files outside the intended Trigger installation directory. This could allow arbitrary file write with the permissions of the IoTDB process.

This issue affects Apache IoTDB: from 1.3.3 before 2.0.8.

Users are recommended to upgrade to version 2.0.8, which fixes the issue.

🎖@cveNotify