🚨 CVE-2026-46455
Insufficient Session Expiration vulnerability in Apache Camel Keycloak Component.

The camel-keycloak security helper KeycloakSecurityHelper.parseAndVerifyAccessToken builds a Keycloak TokenVerifier using withChecks(...) with only the subject-exists check and the realm-URL (issuer) check. Keycloak's TokenVerifier.withChecks(...) appends to an initially empty check list - the upstream default checks are installed only when withDefaultChecks() is called - so the built-in IS_ACTIVE predicate, which validates the token's exp (expiration) and nbf (not-before) claims, is never applied. As a result the helper verifies the token signature, subject and issuer but does not enforce the token's validity window: an access token that is expired, or not yet valid, is accepted as valid. Routes that rely on this helper to authenticate inbound requests therefore accept access tokens that are outside their intended lifetime.
This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes KeycloakSecurityHelper.parseAndVerifyAccessToken include the TokenVerifier.IS_ACTIVE check so that expired or not-yet-valid access tokens are rejected, aligning the helper with Keycloak's default check set. For deployments that cannot upgrade immediately, enforce token expiration outside the helper - for example validate the access token's exp/nbf claims in the route before trusting it, keep Keycloak access-token lifetimes short, and ensure any upstream gateway or resource server also validates the token validity window.

🎖@cveNotify

🚨 CVE-2026-46456
Improper Input Validation vulnerability in Apache Camel AWS2-SQS Component.


The camel-aws2-sqs component map inbound message attributes into the Camel Exchange through a component-specific HeaderFilterStrategy. Sqs2HeaderFilterStrategy configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers being written to the broker) but did not configure an inbound filter. As a result, when Sqs2Consumer copies each SQS MessageAttribute into the Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, DefaultHeaderFilterStrategy applied no inbound rule and treated every header name as not filtered - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - copying them unmodified onto the Camel message. Any principal able to send messages to the consumed SQS queue (for example a cross-account sender or a lower-privileged in-account component holding sqs:SendMessage) could therefore set arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.


This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds an inbound HeaderFilterStrategy rule to Sqs2HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so sender-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and restrict who may send to the consumed SQS queue by applying least-privilege sqs:SendMessage permissions on the queue resource policy.

🎖@cveNotify

🚨 CVE-2026-46457
Improper Input Validation vulnerability in Apache Camel NATS component.

The camel-nats component maps inbound NATS message headers into the Camel Exchange but defaulted its headerFilterStrategy to a bare new DefaultHeaderFilterStrategy() with no inbound rules configured (NatsConfiguration). With no inFilter, inFilterPattern or inFilterStartsWith set, DefaultHeaderFilterStrategy.applyFilterToExternalHeaders returns not filtered for every header name, so NatsConsumer copies every NATS message header - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - unmodified onto the Camel message. A client able to publish to the consumed NATS subject can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. NATS message headers require NATS 2.2 or later, and the issue is reachable without credentials when the NATS server is configured without authentication (the NATS server default).
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes camel-nats default to a dedicated NatsHeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound NATS messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and enable authentication on the NATS server so that only trusted clients can publish to the consumed subject.

🎖@cveNotify

🚨 CVE-2026-46585
Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Lucene Component.

The camel-lucene producer reads the search phrase from an Exchange header (LuceneConstants.HEADER_QUERY) whose value was the plain string QUERY (and RETURN_LUCENE_DOCS for HEADER_RETURN_LUCENE_DOCS). Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that exposes a Lucene query operation behind an HTTP consumer (for example platform-http), any HTTP client could therefore set the QUERY header and have its value executed against the full-text index, overriding the query the route intended to run. Depending on what is indexed, this allows reading documents the request should not have access to (for example a match-all query returns the entire index, or the route's intended per-user filter can be replaced), and expensive regular-expression queries can consume significant CPU. No credentials are required when the HTTP consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set the query via the raw header name must use CamelLuceneQuery (and CamelLuceneReturnLuceneDocs) instead of QUERY / RETURN_LUCENE_DOCS. For deployments that cannot upgrade immediately, strip the attacker-controllable headers before the Lucene producer and set the query from a trusted source (for example removeHeader('QUERY') and removeHeader('RETURN_LUCENE_DOCS'), then setHeader('QUERY', constant(...)) at the start of the route).

🎖@cveNotify

🚨 CVE-2026-46590
Deserialization of Untrusted Data vulnerability in Apache Camel PQC component.

The camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. HashicorpVaultKeyLifecycleManager and AwsSecretsManagerKeyLifecycleManager read that metadata back from the configured secret backend by deserializing a Base64-wrapped value with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. The same unfiltered legacy-migration read also remained in FileBasedKeyLifecycleManager (for the stored KeyPair and KeyMetadata). A principal who can write to the operator-controlled backend that holds these values - the HashiCorp Vault KV path, or the AWS Secrets Manager secret (requiring a Vault token or secretsmanager:PutSecretValue) - could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is an incomplete-remediation follow-on to CVE-2026-40048 (CAMEL-23200), which changed FileBasedKeyLifecycleManager to store metadata as JSON / PKCS#8 / X.509 but did not add an ObjectInputFilter, did not cover the Vault and AWS sibling managers, and left FileBasedKeyLifecycleManager's own legacy-migration deserialization unfiltered.
This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the key backend so that only the application's own identity can write the camel-pqc secrets (least-privilege HashiCorp Vault policies and secretsmanager:PutSecretValue IAM), and keep the PQC key material in a backend separate from any data that less-trusted principals can write.

🎖@cveNotify

🚨 CVE-2026-46591
Improper Neutralization of Special Elements in Data Query Logic vulnerability in Apache Camel Neo4J component.

The camel-neo4j producer builds the Cypher WHERE clause for its match/retrieve and delete operations from the CamelNeo4jMatchProperties map. CVE-2025-66169 addressed Cypher injection through the property values by binding them as query parameters ($paramN), but the property names (the JSON keys of that map) were still concatenated into the query string verbatim in Neo4jProducer.retrieveNodes() and deleteNode(). A property name containing Cypher syntax therefore alters the structure of the executed query. Where a route maps untrusted input into the CamelNeo4jMatchProperties map - for example by passing a request body as the match map, or from a consumer that does not filter inbound Camel* headers - an attacker who controls the JSON key names can inject arbitrary Cypher and read, modify or delete any node or relationship in the Neo4j database. The CamelNeo4jMatchProperties header is itself Camel-prefixed and is filtered by the HTTP header-filter strategy, so a plain HTTP client cannot set it directly; the issue is reachable through routes that deliberately or inadvertently carry untrusted data into that header.
This issue affects Apache Camel: from 4.10.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, do not populate the CamelNeo4jMatchProperties map from untrusted input: validate or allow-list the property names (for example against ^[A-Za-z_][A-Za-z0-9_]*$) before the Neo4j producer, and ensure that any consumer feeding such a route filters inbound Camel* / camel* headers so the match header cannot be supplied by an external sender.

🎖@cveNotify

🚨 CVE-2026-46592
Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel CXF SOAP component.

The camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATION_NAME / OPERATION_NAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route.

🎖@cveNotify

🚨 CVE-2026-46726
Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Vertx Websocket component.

The camel-vertx-websocket consumer mapped inbound WebSocket query and path parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (VertxWebsocketConsumer.populateExchangeHeaders()). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the affected consumers apply a HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.

🎖@cveNotify

🚨 CVE-2026-48203
Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel Solr component.

The camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix constants (SolrConstants.HEADER_PARAM_PREFIX / HEADER_FIELD_PREFIX) were the plain strings SolrParam. / SolrField.. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a solr: producer, any HTTP client could therefore set SolrParam.* headers to inject arbitrary Solr request parameters - including shards or stream.url, which cause the Solr server to issue server-side requests to an attacker-chosen URL (server-side request forgery, for example to an internal service or a cloud metadata endpoint), or qt to reach administrative request handlers - and set SolrField.* headers to inject arbitrary fields into indexed documents. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Solr parameters or fields via the raw header prefixes must use CamelSolrParam. / CamelSolrField. instead of SolrParam. / SolrField.. For deployments that cannot upgrade immediately, strip the SolrParam.* and SolrField.* headers from any untrusted ingress before the solr: producer, and set the required Solr parameters and fields from a trusted source in the route.

🎖@cveNotify

🚨 CVE-2026-48204
Improper Input Validation, Improper Access Control vulnerability in Apache Camel in Camel Mongodb Gridfs component.

The camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint's operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFS_OPERATION, GRIDFS_OBJECT_ID, GRIDFS_METADATA, GRIDFS_CHUNKSIZE, GRIDFS_FILE_ID_PRODUCED) were the plain strings gridfs.operation, gridfs.objectid, gridfs.metadata, gridfs.chunksize and gridfs.fileid. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a mongodb-gridfs: producer with no explicit operation, any HTTP client could therefore set the gridfs.operation header to override the route's intended operation - switching, for example, a file upload to remove (deleting a file identified by the attacker-supplied gridfs.objectid), listAll (enumerating every file in the bucket) or findOne (reading a file) - and supply a gridfs.metadata value that is parsed as a MongoDB document, enabling NoSQL operator injection. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive GridFS operations or metadata via the raw header names must use CamelGridFsOperation / CamelGridFsObjectId / CamelGridFsMetadata / CamelGridFsChunkSize / CamelGridFsFileId instead of the gridfs.* names. For deployments that cannot upgrade immediately, set an explicit operation on the mongodb-gridfs: endpoint so the operation is not taken from a header, and strip the gridfs.* headers from any untrusted ingress before the producer.

🎖@cveNotify

🚨 CVE-2026-48205
Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel DNS component.

The camel-dns producers read DNS operation parameters - the resolver to query, the name or domain to look up, the record type and class, and the search term - from Exchange message headers whose constant values (DnsConstants.DNS_SERVER, DNS_NAME, DNS_DOMAIN, DNS_TYPE, DNS_CLASS, TERM) were the plain strings dns.server, dns.name, dns.domain, dns.type, dns.class and term. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a dns: producer, any HTTP client could therefore set the dns.server header to make the dig producer build a SimpleResolver pointing at an attacker-controlled DNS server - a server-side request forgery via DNS, through which the attacker observes the queried name and can return poisoned responses - and set the dns.name / dns.domain headers to resolve arbitrary internal hostnames, disclosing whether they exist (internal network reconnaissance). No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive DNS operations via the raw header names must use CamelDnsServer / CamelDnsName / CamelDnsDomain / CamelDnsType / CamelDnsClass / CamelDnsTerm instead of the dns.* / term names. For deployments that cannot upgrade immediately, strip the dns.* and term headers from any untrusted ingress before the dns: producer, and set the DNS server and lookup parameters from a trusted source in the route.

🎖@cveNotify

🚨 CVE-2026-48206
Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel JIRA component.

The camel-jira producers read their operation parameters - the issue key, project key, transition id, summary, type, assignee, components, watchers, link type, work-log minutes and others - from Exchange message headers. The header constants defined in JiraConstants (for example ISSUE_KEY = IssueKey, ISSUE_PROJECT_KEY = ProjectKey, ISSUE_TRANSITION_ID = IssueTransitionId, LINK_TYPE = linkType) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a jira: producer, any HTTP client could therefore supply these headers and override the values the route intended, driving JIRA operations against the configured JIRA instance with the endpoint's configured service-account credentials - for example deleting or transitioning an arbitrary issue (via IssueKey / IssueTransitionId), creating an issue in a different project (via ProjectKey), modifying issue fields, adding or removing watchers, or logging work. The operations are bounded by what the configured service account is permitted to do. No credentials are required from the attacker when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive JIRA operations via the raw header names must use the CamelJira* names (for example CamelJiraIssueKey) instead of the old values. For deployments that cannot upgrade immediately, strip the camel-jira control headers from any untrusted ingress before the jira: producer (for example removing the IssueKey, ProjectKey, IssueTransitionId and related headers at the start of the route), and set the required JIRA operation parameters from a trusted source.

🎖@cveNotify

🚨 CVE-2026-49086
Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel DAPR component.

The camel-dapr Dapr Pub/Sub consumer (DaprPubSubConsumer) copied two fields from each inbound CloudEvent - its Pub/Sub component name and its topic - into the CamelDaprPubSubName and CamelDaprTopic Exchange headers. These two headers are producer-direction routing headers: when the route republishes through a Dapr producer, DaprConfigurationOptionsProxy reads them back and prefers them over the destination configured on the endpoint. As a result, in a route that consumes from one Dapr Pub/Sub topic and republishes to another (for example from('dapr-pubsub:p:t').to('dapr-pubsub:p:other')), an actor able to publish a message to the subscribed topic could set the CloudEvent's pub/sub-name and topic to values of their choosing and cause the re-published message to be delivered to an arbitrary Dapr Pub/Sub component and topic instead of the configured destination - redirecting or exfiltrating the message and bypassing the route's intended routing and any topic-level access controls in the underlying broker. Exploitation requires the ability to publish to the topic the route subscribes to; no other authentication or user interaction is needed.
This issue affects Apache Camel: from 4.12.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, remove the CamelDaprPubSubName and CamelDaprTopic headers from the Exchange between the Dapr consumer and any Dapr producer in the route (for example removeHeaders('CamelDaprPubSubName', 'CamelDaprTopic')), and restrict who can publish to the subscribed Dapr Pub/Sub topic so that only trusted producers can send to it.

🎖@cveNotify

🚨 CVE-2026-56140
Improper Input Validation vulnerability in Apache Camel AWS SNS component.


The camel-aws2-sns component filters Camel headers through a component-specific HeaderFilterStrategy, Sns2HeaderFilterStrategy. Like the sibling Sqs2HeaderFilterStrategy, it originally configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers from being written out) and did not configure an inbound filter rule. For the related camel-aws2-sqs component this inbound gap was exploitable, because the Sqs2Consumer maps inbound SQS message attributes into the Camel Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, allowing a message sender to inject Camel control headers (tracked as CVE-2026-46456). camel-aws2-sns, by contrast, is producer-only: Sns2Endpoint does not support consumers (createConsumer throws UnsupportedOperationException, 'You cannot receive messages from this endpoint'), so no externally-supplied message attributes are ever mapped inbound into a Camel Exchange through SNS, and the missing inbound filter rule on Sns2HeaderFilterStrategy was therefore not reachable by an attacker. As part of the same fix (CAMEL-23506), an inbound filter rule (setInFilterStartsWith for the Camel namespace) was added to Sns2HeaderFilterStrategy so that its configuration matches the corrected Sqs2HeaderFilterStrategy and the other sibling strategies. This is a defense-in-depth alignment with no known exploit path in camel-aws2-sns.


This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

This is a defense-in-depth hardening change with no known exploit path in camel-aws2-sns, which is producer-only, so no urgent action or workaround is required. Users who want the aligned behaviour can upgrade to version 4.21.0, or to 4.14.8 on the 4.14.x LTS releases stream, or to 4.18.3 on the 4.18.x releases stream, which contain the change. As a general best practice, operators should continue to apply least-privilege IAM permissions on their SNS topics.

🎖@cveNotify

🚨 CVE-2026-49297
Apache Airflow's Google provider operators `GCSToSFTPOperator` and `GCSTimeSpanFileTransformOperator` joined GCS object names returned by the bucket listing API directly to a destination filesystem path without normalisation or containment check. A user with write access to the source GCS bucket (typically a different trust principal than the DAG author — partner uploads, ingest-only service accounts, public-data buckets) could create an object whose name contains `..` segments and cause the DAG run to write the downloaded blob outside the configured destination (the SFTP `destination_path` for `GCSToSFTPOperator`; the worker-local temp directory for `GCSTimeSpanFileTransformOperator`), enabling overwrite of arbitrary files on the SFTP server or the worker host. Affects deployments that ingest from buckets writable by less-trusted principals. Users are advised to upgrade to `apache-airflow-providers-google` 22.2.1 or later.

🎖@cveNotify

🚨 CVE-2026-13705
Imager versions before 1.032 for Perl have a heap out-of-bounds read in the bundled Imager::File::SGI reader via a 16-bit RLE literal run in read_rgb_16_rle.

read_rgb_16_rle guards each literal run with if (count > data_left), but count is a pixel count while every 16-bit sample consumes two bytes. The copy loop reads inp[0] * 256 + inp[1] and advances two bytes per pixel, so a run with data_left / 2 < count <= data_left passes the guard yet consumes 2 * count bytes and reads past the end of the buffer. The 8-bit path is unaffected because there one pixel is one byte.

Reading a crafted SGI image through Imager->read triggers the over-read before the parser rejects the malformed image, which can crash the process.

🎖@cveNotify

🚨 CVE-2026-43825
Untrusted Java Deserialization in Apache OpenNLP SvmDoccatModel

Versions Affected:
  before 3.0.0-M4 (libsvm document categorization module; introduced in
  OPENNLP-1808 and only present on the 3.x line)

Description:
SvmDoccatModel.deserialize(InputStream) reads an attacker-controlled
stream with java.io.ObjectInputStream and calls readObject() without an
ObjectInputFilter installed. ObjectInputStream materialises every class
referenced in the stream before the resulting object is cast to
SvmDoccatModel, so the cast that follows readObject() executes only
after the foreign object graph has already been deserialised in full.

If a Java deserialization gadget chain is available on the consumer's
classpath, a crafted payload supplied to
deserialize() executes arbitrary code in the JVM that loads it. Apache
OpenNLP itself does not ship a known gadget chain, so the realistic
risk is to downstream applications that embed the libsvm module
alongside vulnerable transitive dependencies. The method is public and
static, so any caller can pass an untrusted stream to it directly.

The practical impact is remote code execution against processes that
load SvmDoccatModel instances from untrusted or semi-trusted origins.

Mitigation:

3.x users should upgrade to 3.0.0-M4.

Users who cannot upgrade immediately should treat all serialized
SvmDoccatModel streams as untrusted input unless their provenance is
verified, and should avoid invoking SvmDoccatModel.deserialize() on
streams supplied by end users or fetched from third-party sources
without integrity checks.

🎖@cveNotify

🚨 CVE-2026-13753
A missing authorization vulnerability exists in the embedded webserver of HP Deskjet 2800 Series Printers running firmware version <=TBP1CN2612AR. An unauthenticated attacker with network access can send GET requests to multiple exposed administrative API endpoints and retrieve sensitive configuration data such as plaintext Wi‑Fi Direct credentials, unique device identity information, and other administrative security state details. When accessed through the web interface, these setting pages explicitly require administrator credentials before sensitive information is displayed.

🎖@cveNotify

🚨 CVE-2026-55379
Pillow is a Python imaging library. Prior to 12.3.0, PIL/BdfFontFile.py bdf_char() read the BBX width and height field from a BDF font file and passed attacker-controlled dimensions to Image.new() without calling Image._decompression_bomb_check(), bypassing Pillow's documented decompression bomb protection and allowing excessive memory allocation. This issue is fixed in version 12.3.0.

🎖@cveNotify

🚨 CVE-2026-55380
Pillow is a Python imaging library. Prior to 12.3.0, PIL/GdImageFile.py GdImageFile._open() read image dimensions from the GD 2.x header and stored them in self._size without calling Image._decompression_bomb_check(), allowing a crafted .gd file to trigger excessive C-heap allocation when loaded. This issue is fixed in version 12.3.0.

🎖@cveNotify

🚨 CVE-2026-9181
ArcGIS Server contains a directory traversal vulnerability. An unauthenticated attacker could exploit this issue by sending crafted path parameters. Successful exploitation could allow access to sensitive files on the system. This issue impacts all versions of ArcGIS Server 12.0 and prior.

🎖@cveNotify