🚨 CVE-2026-55798
Pillow is a Python imaging library. Prior to 12.3.0, WindowsViewer.get_command() constructed a cmd.exe shell command by directly embedding a file path into an f-string without escaping and passed the result to subprocess.Popen(..., shell=True), allowing shell metacharacters in the file path to inject arbitrary cmd.exe commands. This issue is fixed in version 12.3.0.

🎖@cveNotify

🚨 CVE-2026-9181
ArcGIS Server contains a directory traversal vulnerability. An unauthenticated attacker could exploit this issue by sending crafted path parameters. Successful exploitation could allow access to sensitive files on the system. This issue impacts all versions of ArcGIS Server 12.0 and prior.

🎖@cveNotify

🚨 CVE-2026-9182
ArcGIS Server contains an unrestricted file upload vulnerability. An unauthenticated attacker could exploit this issue by uploading a crafted file to the affected endpoint. Successful exploitation could allow arbitrary file upload.

🎖@cveNotify

🚨 CVE-2026-33845
A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service.

🎖@cveNotify

🚨 CVE-2026-33846
A heap buffer overflow vulnerability exists in the DTLS handshake fragment reassembly logic of GnuTLS. The issue arises in merge_handshake_packet() where incoming handshake fragments are matched and merged based solely on handshake type, without validating that the message_length field remains consistent across all fragments of the same logical message. An attacker can exploit this by sending crafted DTLS fragments with conflicting message_length values, causing the implementation to allocate a buffer based on a smaller initial fragment and subsequently write beyond its bounds using larger, inconsistent fragments. Because the merge operation does not enforce proper bounds checking against the allocated buffer size, this results in an out-of-bounds write on the heap. The vulnerability is remotely exploitable without authentication via the DTLS handshake path and can lead to application crashes or potential memory corruption.

🎖@cveNotify

🚨 CVE-2026-42010
A flaw was found in gnutls. Servers configured with RSA-PSK (Rivest–Shamir–Adleman – Pre-Shared Key) wrongfully matched usernames containing a NUL character with truncated usernames. A remote attacker could exploit this by sending a specially crafted username, leading to an authentication bypass. This vulnerability allows an attacker to gain unauthorized access by circumventing the authentication process.

🎖@cveNotify

🚨 CVE-2026-42009
A flaw was found in gnutls. A remote attacker could exploit an issue in the Datagram Transport Layer Security (DTLS) packet reordering logic. The comparator function, responsible for ordering DTLS packets by sequence numbers, did not correctly handle packets with duplicate sequence numbers. This could lead to unstable packet ordering or undefined behavior, resulting in a denial of service.

🎖@cveNotify

🚨 CVE-2026-53167
In the Linux kernel, the following vulnerability has been resolved:

fuse: limit FUSE_NOTIFY_RETRIEVE to uptodate folios

FUSE_NOTIFY_RETRIEVE must be limited to uptodate folios; !uptodate folios
can contain uninitialized data.
Since FUSE_NOTIFY_RETRIEVE is intended to only return data that is already
in the page cache and not wait for data from the FUSE daemon, treat
!uptodate folios as if they weren't present.

This only has security impact on systems that don't enable automatic
zero-initialization of all page allocations via
CONFIG_INIT_ON_ALLOC_DEFAULT_ON or init_on_alloc=1.

🎖@cveNotify

🚨 CVE-2026-53168
In the Linux kernel, the following vulnerability has been resolved:

fuse: reject fuse_notify() pagecache ops on directories

The operations FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE allow the
FUSE daemon to actively write/read pagecache contents.

For directories with FOPEN_CACHE_DIR, the pagecache is used as
kernel-internal cache storage, and userspace is not supposed to have
direct access to this cache - in particular, fuse_parse_cache() will hit
WARN_ON() if the cache contains bogus data.

Reject FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE on anything other than
regular files with -EINVAL.

🎖@cveNotify

🚨 CVE-2026-13351
Zephyr's IPv6 network stack can be prevented from receiving or processing future incoming packets by sending a small number of maliciously fragmented IPv6 packets. When such a packet is handled by the fragment-header processing path, the associated RX network packet buffer (allocated from a memory slab) is not released back to the pool. Repeating the malicious packet exhausts all RX buffer slots, after which the device can no longer obtain RX buffers and stops receiving traffic, resulting in a denial of service.

🎖@cveNotify

🚨 CVE-2026-53306
In the Linux kernel, the following vulnerability has been resolved:

tty: hvc_iucv: fix off-by-one in number of supported devices

MAX_HVC_IUCV_LINES == HVC_ALLOC_TTY_ADAPTERS == 8.
This is the number of entries in:
static struct hvc_iucv_private *hvc_iucv_table[MAX_HVC_IUCV_LINES];

Sometimes hvc_iucv_table[] is limited by:
(a) if (num > hvc_iucv_devices) // for error detection
or
(b) for (i = 0; i < hvc_iucv_devices; i++) // in 2 places
(so these 2 don't agree; second one appears to be correct to me.)

hvc_iucv_devices can be 0..8. This is a counter.
(c) if (hvc_iucv_devices > MAX_HVC_IUCV_LINES)

If hvc_iucv_devices == 8, (a) allows the code to access hvc_iucv_table[8].
Oops.

🎖@cveNotify

🚨 CVE-2026-53307
In the Linux kernel, the following vulnerability has been resolved:

pinctrl: pinconf-generic: Fully validate 'pinmux' property

The pinconf_generic_parse_dt_pinmux() assumes that the 'pinmux' property
is not empty when present. This might be not true. With that, the allocator
will give a special value in return and not NULL which lead to the crash
when trying to access that (invalid) memory. Fix that by fully validating
'pinmux' value, including its length.

🎖@cveNotify

🚨 CVE-2026-53308
In the Linux kernel, the following vulnerability has been resolved:

power: supply: max77705: Free allocated workqueue and fix removal order

Use devm interface for allocating workqueue to fix two bugs at the same
time:

1. Driver leaks the memory on remove(), because the workqueue is not
destroyed.

2. Driver allocates workqueue and then registers interrupt handlers
with devm interface. This means that probe error paths will not use a
reversed order, but first destroy the workqueue and then, via devm
release handlers, free the interrupt.

The interrupt handler schedules work on this exact workqueue, thus if
interrupt is hit in this short time window - after destroying
workqueue, but before devm() frees the interrupt - the schedulled
work will lead to use of freed memory.

Change is not equivalent in the workqueue itself: use non-legacy API
which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is
used to update power supply (power_supply_changed()) status, thus there
is no point to run it for memory reclaim. Note that dev_name() is not
directly used in second argument to prevent possible unlikely parsing
any "%" character in device name as format.

🎖@cveNotify

🚨 CVE-2026-53309
In the Linux kernel, the following vulnerability has been resolved:

ocfs2/dlm: fix off-by-one in dlm_match_regions() region comparison

The local-vs-remote region comparison loop uses '<=' instead of '<',
causing it to read one entry past the valid range of qr_regions. The
other loops in the same function correctly use '<'.

Fix the loop condition to use '<' for consistency and correctness.

🎖@cveNotify

🚨 CVE-2026-53310
In the Linux kernel, the following vulnerability has been resolved:

soc/tegra: cbb: Fix cross-fabric target timeout lookup

When a fabric receives an error interrupt, the error may have
occurred on a different fabric. The target timeout lookup was using
the wrong base address (cbb->regs) with offsets from a different
fabric's target map, causing a kernel page fault.

Unable to handle kernel paging request at virtual address ffff80000954cc00
pc : tegra234_cbb_get_tmo_slv+0xc/0x28
Call trace:
tegra234_cbb_get_tmo_slv+0xc/0x28
print_err_notifier+0x6c0/0x7d0
tegra234_cbb_isr+0xe4/0x1b4

Add tegra234_cbb_get_fabric() to look up the correct fabric device
using fab_id, and use its base address for accessing target timeout
registers.

🎖@cveNotify

🚨 CVE-2026-53311
In the Linux kernel, the following vulnerability has been resolved:

fuse: fix uninit-value in fuse_dentry_revalidate()

fuse_dentry_revalidate() may be called with a dentry that didn't had
->d_time initialised. The issue was found with KMSAN, where lookup_open()
calls __d_alloc(), followed by d_revalidate(), as shown below:

=====================================================
BUG: KMSAN: uninit-value in fuse_dentry_revalidate+0x150/0x13d0 fs/fuse/dir.c:394
fuse_dentry_revalidate+0x150/0x13d0 fs/fuse/dir.c:394
d_revalidate fs/namei.c:1030 [inline]
lookup_open fs/namei.c:4405 [inline]
open_last_lookups fs/namei.c:4583 [inline]
path_openat+0x1614/0x64c0 fs/namei.c:4827
do_file_open+0x2aa/0x680 fs/namei.c:4859
[...]

Uninit was created at:
slab_post_alloc_hook mm/slub.c:4466 [inline]
slab_alloc_node mm/slub.c:4788 [inline]
kmem_cache_alloc_lru_noprof+0x382/0x1280 mm/slub.c:4807
__d_alloc+0x55/0xa00 fs/dcache.c:1740
d_alloc_parallel+0x99/0x2740 fs/dcache.c:2604
lookup_open fs/namei.c:4398 [inline]
open_last_lookups fs/namei.c:4583 [inline]
path_openat+0x135f/0x64c0 fs/namei.c:4827
do_file_open+0x2aa/0x680 fs/namei.c:4859
[...]
=====================================================

🎖@cveNotify

🚨 CVE-2026-53312
In the Linux kernel, the following vulnerability has been resolved:

iommu/riscv: Remove overflows on the invalidation path

Since RISC-V supports a sign extended page table it should support
a gather->end of ULONG_MAX, but if this happens it will infinite loop
because of the overflow.

Also avoid overflow computing the length by moving the +1 to the other
side of the <

🎖@cveNotify

🚨 CVE-2026-53313
In the Linux kernel, the following vulnerability has been resolved:

drm/amd/display: Avoid NULL dereference in dc_dmub_srv error paths

In dc_dmub_srv_log_diagnostic_data() and
dc_dmub_srv_enable_dpia_trace().

Both functions check:

if (!dc_dmub_srv || !dc_dmub_srv->dmub)

and then call DC_LOG_ERROR() inside that block.

DC_LOG_ERROR() uses dc_dmub_srv->ctx internally. So if
dc_dmub_srv is NULL, the logging itself can dereference a
NULL pointer and cause a crash.

Fix this by splitting the checks.

First check if dc_dmub_srv is NULL and return immediately.
Then check dc_dmub_srv->dmub and log the error only when
dc_dmub_srv is valid.

Fixes the below:
../display/dc/dc_dmub_srv.c:962 dc_dmub_srv_log_diagnostic_data() error: we previously assumed 'dc_dmub_srv' could be null (see line 961)
../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_enable_dpia_trace() error: we previously assumed 'dc_dmub_srv' could be null (see line 1166)

🎖@cveNotify

🚨 CVE-2026-53314
In the Linux kernel, the following vulnerability has been resolved:

padata: Put CPU offline callback in ONLINE section to allow failure

syzbot reported the following warning:

DEAD callback error for CPU1
WARNING: kernel/cpu.c:1463 at _cpu_down+0x759/0x1020 kernel/cpu.c:1463, CPU#0: syz.0.1960/14614

at commit 4ae12d8bd9a8 ("Merge tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux")
which tglx traced to padata_cpu_dead() given it's the only
sub-CPUHP_TEARDOWN_CPU callback that returns an error.

Failure isn't allowed in hotplug states before CPUHP_TEARDOWN_CPU
so move the CPU offline callback to the ONLINE section where failure is
possible.

🎖@cveNotify

🚨 CVE-2026-53315
In the Linux kernel, the following vulnerability has been resolved:

drm/amd/ras: Fix NULL deref in ras_core_get_utc_second_timestamp()

ras_core_get_utc_second_timestamp() retrieves the current UTC timestamp
(in seconds since the Unix epoch) through a platform-specific RAS system
callback and is used for timestamping RAS error events.

The function checks ras_core in the conditional statement before calling
the sys_fn callback. However, when the condition fails, the function
prints an error message using ras_core->dev.

If ras_core is NULL, this can lead to a potential NULL pointer
dereference when accessing ras_core->dev.

Add an early NULL check for ras_core at the beginning of the function
and return 0 when the pointer is not valid. This prevents the
dereference and makes the control flow clearer.

🎖@cveNotify

🚨 CVE-2026-53316
In the Linux kernel, the following vulnerability has been resolved:

drm/amd/ras: Fix NULL deref in ras_core_ras_interrupt_detected()

Fixes a NULL pointer dereference when ras_core is NULL and ras_core->dev
is accessed in the error path.

Reported by: Dan Carpenter <dan.carpenter@linaro.org>

🎖@cveNotify