🚨 CVE-2026-43825
Untrusted Java Deserialization in Apache OpenNLP SvmDoccatModel
Versions Affected:
before 3.0.0-M4 (libsvm document categorization module; introduced in
OPENNLP-1808 and only present on the 3.x line)
Description:
SvmDoccatModel.deserialize(InputStream) reads an attacker-controlled
stream with java.io.ObjectInputStream and calls readObject() without an
ObjectInputFilter installed. ObjectInputStream materialises every class
referenced in the stream before the resulting object is cast to
SvmDoccatModel, so the cast that follows readObject() executes only
after the foreign object graph has already been deserialised in full.
If a Java deserialization gadget chain is available on the consumer's
classpath, a crafted payload supplied to
deserialize() executes arbitrary code in the JVM that loads it. Apache
OpenNLP itself does not ship a known gadget chain, so the realistic
risk is to downstream applications that embed the libsvm module
alongside vulnerable transitive dependencies. The method is public and
static, so any caller can pass an untrusted stream to it directly.
The practical impact is remote code execution against processes that
load SvmDoccatModel instances from untrusted or semi-trusted origins.
Mitigation:
3.x users should upgrade to 3.0.0-M4.
Users who cannot upgrade immediately should treat all serialized
SvmDoccatModel streams as untrusted input unless their provenance is
verified, and should avoid invoking SvmDoccatModel.deserialize() on
streams supplied by end users or fetched from third-party sources
without integrity checks.
🎖@cveNotify
Untrusted Java Deserialization in Apache OpenNLP SvmDoccatModel
Versions Affected:
before 3.0.0-M4 (libsvm document categorization module; introduced in
OPENNLP-1808 and only present on the 3.x line)
Description:
SvmDoccatModel.deserialize(InputStream) reads an attacker-controlled
stream with java.io.ObjectInputStream and calls readObject() without an
ObjectInputFilter installed. ObjectInputStream materialises every class
referenced in the stream before the resulting object is cast to
SvmDoccatModel, so the cast that follows readObject() executes only
after the foreign object graph has already been deserialised in full.
If a Java deserialization gadget chain is available on the consumer's
classpath, a crafted payload supplied to
deserialize() executes arbitrary code in the JVM that loads it. Apache
OpenNLP itself does not ship a known gadget chain, so the realistic
risk is to downstream applications that embed the libsvm module
alongside vulnerable transitive dependencies. The method is public and
static, so any caller can pass an untrusted stream to it directly.
The practical impact is remote code execution against processes that
load SvmDoccatModel instances from untrusted or semi-trusted origins.
Mitigation:
3.x users should upgrade to 3.0.0-M4.
Users who cannot upgrade immediately should treat all serialized
SvmDoccatModel streams as untrusted input unless their provenance is
verified, and should avoid invoking SvmDoccatModel.deserialize() on
streams supplied by end users or fetched from third-party sources
without integrity checks.
🎖@cveNotify
🚨 CVE-2026-48316
ColdFusion versions 2025.9, 2023.20 and earlier are affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue does not require user interaction. Scope is changed.
🎖@cveNotify
ColdFusion versions 2025.9, 2023.20 and earlier are affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue does not require user interaction. Scope is changed.
🎖@cveNotify
Adobe
Adobe Security Bulletin
Security updates available for Adobe ColdFusion | APSB26-68
🚨 CVE-2026-9073
A flaw was found in foreman-mcp-server. This component utilizes two distinct logging mechanisms that can expose sensitive session and authentication data. One mechanism logs session identifiers, which are treated as authentication credentials, at an informational level. The other, when debug logging is enabled, incompletely sanitizes HTTP request headers, leading to the cleartext logging of sensitive information such as authorization tokens and API keys. This vulnerability can result in a confidentiality breach, as sensitive authentication data is persisted in plain text within container logs, increasing the risk if logs are forwarded to a centralized platform.
🎖@cveNotify
A flaw was found in foreman-mcp-server. This component utilizes two distinct logging mechanisms that can expose sensitive session and authentication data. One mechanism logs session identifiers, which are treated as authentication credentials, at an informational level. The other, when debug logging is enabled, incompletely sanitizes HTTP request headers, leading to the cleartext logging of sensitive information such as authorization tokens and API keys. This vulnerability can result in a confidentiality breach, as sensitive authentication data is persisted in plain text within container logs, increasing the risk if logs are forwarded to a centralized platform.
🎖@cveNotify
🚨 CVE-2026-13201
A flaw was found in KubeVirt's safepath package used by virt-handler. The OpenAtNoFollow function uses O_PATH|O_NOFOLLOW to obtain a file descriptor to a path leaf, but downstream operations resolve the path via /proc/self/fd/N using link-following syscalls. When the leaf is a symlink, the kernel dereferences it, defeating the intended no-follow protection. An attacker with access to a virt-launcher pod can exploit this to redirect virt-handler's IPC socket connections, including the notify socket used for VM domain lifecycle events. By hijacking this socket, the attacker can inject arbitrary domain events into virt-handler, causing it to take incorrect lifecycle actions, corrupt VM state in the Kubernetes API, or crash — resulting in sustained denial of VM management services for all virtual machines on the affected node. Additionally, the same symlink following flaw allows virt-handler to apply file ownership or permission changes to unintended host paths.
🎖@cveNotify
A flaw was found in KubeVirt's safepath package used by virt-handler. The OpenAtNoFollow function uses O_PATH|O_NOFOLLOW to obtain a file descriptor to a path leaf, but downstream operations resolve the path via /proc/self/fd/N using link-following syscalls. When the leaf is a symlink, the kernel dereferences it, defeating the intended no-follow protection. An attacker with access to a virt-launcher pod can exploit this to redirect virt-handler's IPC socket connections, including the notify socket used for VM domain lifecycle events. By hijacking this socket, the attacker can inject arbitrary domain events into virt-handler, causing it to take incorrect lifecycle actions, corrupt VM state in the Kubernetes API, or crash — resulting in sustained denial of VM management services for all virtual machines on the affected node. Additionally, the same symlink following flaw allows virt-handler to apply file ownership or permission changes to unintended host paths.
🎖@cveNotify
🚨 CVE-2026-13208
A flaw was found in KubeVirt's virt-handler domain notify server. The gRPC handlers for HandleDomainEvent and HandleK8SEvent derive the VMI identity (namespace/name) solely from the request body without validating it against the connection's origin. Each virt-launcher pod connects through a per-VMI pipe socket, but no identity tag is propagated from the pipe path to the server handlers. This allows a compromised virt-launcher process to send forged domain lifecycle events for any other VMI scheduled on the same node, causing virt-handler to erroneously update that VMI's state and disrupt its lifecycle management.
🎖@cveNotify
A flaw was found in KubeVirt's virt-handler domain notify server. The gRPC handlers for HandleDomainEvent and HandleK8SEvent derive the VMI identity (namespace/name) solely from the request body without validating it against the connection's origin. Each virt-launcher pod connects through a per-VMI pipe socket, but no identity tag is propagated from the pipe path to the server handlers. This allows a compromised virt-launcher process to send forged domain lifecycle events for any other VMI scheduled on the same node, causing virt-handler to erroneously update that VMI's state and disrupt its lifecycle management.
🎖@cveNotify
🚨 CVE-2026-53149
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Bound root directory content to block size
__tb_property_parse_dir() does not check that content_offset +
content_len fits within block_len for the root directory case.
When rootdir->length equals or exceeds block_len - 2, the entry
loop reads past the allocated property block.
Add a bounds check after computing content_offset and content_len
to reject directories whose content extends past the block.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Bound root directory content to block size
__tb_property_parse_dir() does not check that content_offset +
content_len fits within block_len for the root directory case.
When rootdir->length equals or exceeds block_len - 2, the entry
loop reads past the allocated property block.
Add a bounds check after computing content_offset and content_len
to reject directories whose content extends past the block.
🎖@cveNotify
🚨 CVE-2026-53150
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Reject zero-length property entries in validator
tb_property_entry_valid() accepts entries with length == 0 for
DIRECTORY, DATA, and TEXT types. A zero-length TEXT entry passes
validation but causes an underflow in the null-termination logic:
property->value.text[property->length * 4 - 1] = '\0';
When property->length is 0 this writes to offset -1 relative to
the allocation.
Reject zero-length entries early in the validator since they have no
valid representation in the XDomain property protocol.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Reject zero-length property entries in validator
tb_property_entry_valid() accepts entries with length == 0 for
DIRECTORY, DATA, and TEXT types. A zero-length TEXT entry passes
validation but causes an underflow in the null-termination logic:
property->value.text[property->length * 4 - 1] = '\0';
When property->length is 0 this writes to offset -1 relative to
the allocation.
Reject zero-length entries early in the validator since they have no
valid representation in the XDomain property protocol.
🎖@cveNotify
🚨 CVE-2026-53151
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix the ACK parser to extract the SACK table for parsing
Fix modification of the received skbuff in rxrpc_input_soft_acks() and a
potential incorrect access of the buffer in a fragmented UDP packet (the
packet would probably have to be deliberately pre-generated as fragmented)
when AF_RXRPC tries to extract the contents of the SACK table by copying
out the contents of the SACK table into a buffer before attempting to parse
AF_RXRPC assumes that it can just call skb_condense() and then validly
access the SACK table from skb->data and that it will be a flat buffer -
but skb_condense() can silently fail to do anything under some
circumstances.
Note that whilst rxrpc_input_soft_acks() should be able to parse extended
ACKs, the rest of AF_RXRPC doesn't currently support that.
Further, there's then no need to call skb_condense() in rxrpc_input_ack(),
so don't.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix the ACK parser to extract the SACK table for parsing
Fix modification of the received skbuff in rxrpc_input_soft_acks() and a
potential incorrect access of the buffer in a fragmented UDP packet (the
packet would probably have to be deliberately pre-generated as fragmented)
when AF_RXRPC tries to extract the contents of the SACK table by copying
out the contents of the SACK table into a buffer before attempting to parse
AF_RXRPC assumes that it can just call skb_condense() and then validly
access the SACK table from skb->data and that it will be a flat buffer -
but skb_condense() can silently fail to do anything under some
circumstances.
Note that whilst rxrpc_input_soft_acks() should be able to parse extended
ACKs, the rest of AF_RXRPC doesn't currently support that.
Further, there's then no need to call skb_condense() in rxrpc_input_ack(),
so don't.
🎖@cveNotify
🚨 CVE-2026-53152
In the Linux kernel, the following vulnerability has been resolved:
mmc: dw_mmc-rockchip: Add missing private data for very old controllers
The really old controllers (rk2928, rk3066, rk3188) do not support UHS
speeds at all, and thus never handled phase data.
For that reason it never had a parse_dt callback and no driver private
data at all.
Commit ff6f0286c896 ("mmc: dw_mmc-rockchip: Add memory clock auto-gating
support") makes the private data sort of mandatory, because the init
function checks whether phases are configured internally or through the
clock controller.
This results in the old SoCs then experiencing NULL-pointer dereferences
when they try to access that private-data struct.
While we could have if (priv) conditionals in all places, it's way less
cluttery to just give the old types their private-data struct.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
mmc: dw_mmc-rockchip: Add missing private data for very old controllers
The really old controllers (rk2928, rk3066, rk3188) do not support UHS
speeds at all, and thus never handled phase data.
For that reason it never had a parse_dt callback and no driver private
data at all.
Commit ff6f0286c896 ("mmc: dw_mmc-rockchip: Add memory clock auto-gating
support") makes the private data sort of mandatory, because the init
function checks whether phases are configured internally or through the
clock controller.
This results in the old SoCs then experiencing NULL-pointer dereferences
when they try to access that private-data struct.
While we could have if (priv) conditionals in all places, it's way less
cluttery to just give the old types their private-data struct.
🎖@cveNotify
🚨 CVE-2026-13218
A flaw was found in KubeVirt's virt-handler network cache handling. The WriteToCachedFile function writes data to a launcher-rooted path using os.WriteFile and os.Chown without symlink protection. A user with access to the virt-launcher container can plant a symlink at the cache file path, causing virt-handler to follow it and overwrite an arbitrary host file with JSON content and change its ownership.
🎖@cveNotify
A flaw was found in KubeVirt's virt-handler network cache handling. The WriteToCachedFile function writes data to a launcher-rooted path using os.WriteFile and os.Chown without symlink protection. A user with access to the virt-launcher container can plant a symlink at the cache file path, causing virt-handler to follow it and overwrite an arbitrary host file with JSON content and change its ownership.
🎖@cveNotify
🚨 CVE-2026-13318
A server-side request forgery (SSRF) flaw was found in KubeVirt's virt-api port-forward handler. When processing a port-forward request to a VirtualMachineInstance (VMI), virt-api reads the target IP from vmi.Status.Interfaces[0].IP and passes it directly to net.Dial() without validation. For VMIs using non-masquerade network bindings (bridge or secondary-only), this IP is reported by the QEMU guest agent running inside the VM and is fully controllable by the VM owner. An attacker with kubevirt.io:edit permissions can create a VM with a modified guest agent that reports an arbitrary IP address, then request port-forward to establish a bidirectional TCP tunnel from virt-api's cluster-internal network position to any routable destination, bypassing NetworkPolicy isolation.
🎖@cveNotify
A server-side request forgery (SSRF) flaw was found in KubeVirt's virt-api port-forward handler. When processing a port-forward request to a VirtualMachineInstance (VMI), virt-api reads the target IP from vmi.Status.Interfaces[0].IP and passes it directly to net.Dial() without validation. For VMIs using non-masquerade network bindings (bridge or secondary-only), this IP is reported by the QEMU guest agent running inside the VM and is fully controllable by the VM owner. An attacker with kubevirt.io:edit permissions can create a VM with a modified guest agent that reports an arbitrary IP address, then request port-forward to establish a bidirectional TCP tunnel from virt-api's cluster-internal network position to any routable destination, bypassing NetworkPolicy isolation.
🎖@cveNotify
🚨 CVE-2026-13322
A flaw was found in KubeVirt's downward metrics virtio-serial server. The server reads guest requests using textproto.Reader.ReadLine(), which buffers input indefinitely until a newline character is received, with no length limit or read deadline. A user with access to a VM guest that has the downward metrics virtio-serial device configured can write a continuous byte stream to the device, causing unbounded memory allocation in the virt-handler process until it is OOM-killed.
🎖@cveNotify
A flaw was found in KubeVirt's downward metrics virtio-serial server. The server reads guest requests using textproto.Reader.ReadLine(), which buffers input indefinitely until a newline character is received, with no length limit or read deadline. A user with access to a VM guest that has the downward metrics virtio-serial device configured can write a continuous byte stream to the device, causing unbounded memory allocation in the virt-handler process until it is OOM-killed.
🎖@cveNotify
🚨 CVE-2026-13325
A flaw was found in KubeVirt's migration proxy. When spec.configuration.migrations.disableTLS is set to true on the KubeVirt custom resource, the target virt-handler binds a plain TCP listener on all interfaces (0.0.0.0/::) on a random port with no authentication, peer allow-list, or handshake token. This listener proxies directly into the target virt-launcher's virtqemud control socket. An attacker with a running pod on the cluster network can connect to this listener and issue unfiltered libvirt RPC commands against another tenant's virtual machine, including reading VM memory and configuration, modifying VM state via QMP, or destroying the VM. The bind address is unconditionally 0.0.0.0 — configuring a dedicated migration network via migrations.network only changes the advertised migration IP, not the listener bind address, so the port remains reachable on the pod network even when a dedicated migration network is configured. The API documentation describes disableTLS as removing "the additional layer of live migration encryption" without disclosing that it also removes all mutual authentication.
🎖@cveNotify
A flaw was found in KubeVirt's migration proxy. When spec.configuration.migrations.disableTLS is set to true on the KubeVirt custom resource, the target virt-handler binds a plain TCP listener on all interfaces (0.0.0.0/::) on a random port with no authentication, peer allow-list, or handshake token. This listener proxies directly into the target virt-launcher's virtqemud control socket. An attacker with a running pod on the cluster network can connect to this listener and issue unfiltered libvirt RPC commands against another tenant's virtual machine, including reading VM memory and configuration, modifying VM state via QMP, or destroying the VM. The bind address is unconditionally 0.0.0.0 — configuring a dedicated migration network via migrations.network only changes the advertised migration IP, not the listener bind address, so the port remains reachable on the pod network even when a dedicated migration network is configured. The API documentation describes disableTLS as removing "the additional layer of live migration encryption" without disclosing that it also removes all mutual authentication.
🎖@cveNotify
🚨 CVE-2026-13434
A flaw was found in KubeVirt's network annotation generator. When a tenant creates a VirtualMachineInstance with a Multus network configuration, the supplied networkName value is written verbatim into the launcher pod's v1.multus-cni.io/default-network annotation without format validation or sanitization. The only admission check rejects empty strings; no DNS-1123 format validation, JSON detection, or special character rejection is performed. When the ExternalNetResourceInjection Beta feature gate is enabled (off by default, cluster-admin only), the NAD lookup that would otherwise catch malformed names is skipped by design. A tenant with kubevirt.io:edit permissions can inject a JSON-formatted NetworkSelectionElement array specifying an arbitrary namespace, NAD name, static IP address, and MAC address. Multus on the node parses this JSON and attaches the launcher pod to the specified network attachment in any namespace, enabling cross-namespace network access and IP/MAC impersonation on network segments normally segregated from tenant workloads. The ExternalNetResourceInjection feature gate was introduced in KubeVirt v1.8.0 (first shipped in OpenShift Virtualization 4.21).
🎖@cveNotify
A flaw was found in KubeVirt's network annotation generator. When a tenant creates a VirtualMachineInstance with a Multus network configuration, the supplied networkName value is written verbatim into the launcher pod's v1.multus-cni.io/default-network annotation without format validation or sanitization. The only admission check rejects empty strings; no DNS-1123 format validation, JSON detection, or special character rejection is performed. When the ExternalNetResourceInjection Beta feature gate is enabled (off by default, cluster-admin only), the NAD lookup that would otherwise catch malformed names is skipped by design. A tenant with kubevirt.io:edit permissions can inject a JSON-formatted NetworkSelectionElement array specifying an arbitrary namespace, NAD name, static IP address, and MAC address. Multus on the node parses this JSON and attaches the launcher pod to the specified network attachment in any namespace, enabling cross-namespace network access and IP/MAC impersonation on network segments normally segregated from tenant workloads. The ExternalNetResourceInjection feature gate was introduced in KubeVirt v1.8.0 (first shipped in OpenShift Virtualization 4.21).
🎖@cveNotify
🚨 CVE-2023-37524
HCL Traveler for Microsoft Outlook (HTMO) is susceptible to vulnerabilities due to .NET Framework 4.5 being out of service. Since .NET Framework 4.5 has reached end-of-life and no longer receives security updates, it may expose the application to publicly known security weaknesses through vulnerable third-party components.
🎖@cveNotify
HCL Traveler for Microsoft Outlook (HTMO) is susceptible to vulnerabilities due to .NET Framework 4.5 being out of service. Since .NET Framework 4.5 has reached end-of-life and no longer receives security updates, it may expose the application to publicly known security weaknesses through vulnerable third-party components.
🎖@cveNotify
Hcl-Software
Security Bulletin: Multiple vulnerabilities in Microsoft .NET Framework 4.5 affect HCL Traveler for Microsoft Outlook - Customer…
HCL Traveler for Microsoft Outlook (HTMO) is susceptible to vulnerabilities due to .NET Framework 4.5
🚨 CVE-2025-59868
HCL Traveler for Microsoft Outlook (HTMO) is susceptible to a sensitive data exposure vulnerability which could allow an attacker to exploit application information to then attempt additional attacks and cause unknown behavior in the application.
🎖@cveNotify
HCL Traveler for Microsoft Outlook (HTMO) is susceptible to a sensitive data exposure vulnerability which could allow an attacker to exploit application information to then attempt additional attacks and cause unknown behavior in the application.
🎖@cveNotify
Hcl-Software
Security Bulletin: HCL Traveler for Microsoft Outlook (HTMO) is susceptible to sensitive data exposure (CVE-2025-59868) - Customer…
HCL Traveler for Microsoft Outlook (HTMO) is susceptible to sensitive data exposure.
🚨 CVE-2026-13316
A flaw has been found in foreman when HTTP parameters are modified in http_proxies_controller and http_proxy files. Attackers can perform an SSRF attack and steal cloud metadata service on AWS/GCP/Azure environment through foreman component.
🎖@cveNotify
A flaw has been found in foreman when HTTP parameters are modified in http_proxies_controller and http_proxy files. Attackers can perform an SSRF attack and steal cloud metadata service on AWS/GCP/Azure environment through foreman component.
🎖@cveNotify
🚨 CVE-2026-53902
MCO does not properly enforce authorization checks in the /customer/servlet/mco/webapi/profile-sections/group-membership endpoint. An authenticated user can modify their group membership without proper authorization checks, allowing privilege escalation.
An attacker can add themselves to arbitrary groups by supplying a valid group ID, which can be obtained via other application functionalities (e.g. /customer/servlet/mco/webapi/group/picker/groups), provided he has necessary permissions, or potentially inferred through brute-force techniques.
Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 25.3.3.1 but may also affect other versions.
🎖@cveNotify
MCO does not properly enforce authorization checks in the /customer/servlet/mco/webapi/profile-sections/group-membership endpoint. An authenticated user can modify their group membership without proper authorization checks, allowing privilege escalation.
An attacker can add themselves to arbitrary groups by supplying a valid group ID, which can be obtained via other application functionalities (e.g. /customer/servlet/mco/webapi/group/picker/groups), provided he has necessary permissions, or potentially inferred through brute-force techniques.
Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 25.3.3.1 but may also affect other versions.
🎖@cveNotify
cert.pl
Vulnerabilities in MyComplianceOffice MCO software
CERT Polska has received a report about 8 vulnerabilities (from CVE-2026-53902 to CVE-2026-53909) found in MyComplianceOffice MCO software.
🚨 CVE-2026-53903
MCO is vulnerable to an Insecure Direct Object Reference (IDOR) vulnerability in the /customer/servlet/mco/webapi/trading-document/fetchPdfStatement endpoint. The application does not properly validate whether an authenticated user is authorized to access a requested document, allowing direct retrieval based on a user-supplied identifier.
An attacker can access trading documents belonging to other users by providing a valid document ID. Although exploitation requires guessing the identifier, predictable ID patterns enable feasible enumeration, leading to unauthorized disclosure of sensitive information.
Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 25.3.3.1 but may also affect other versions.
🎖@cveNotify
MCO is vulnerable to an Insecure Direct Object Reference (IDOR) vulnerability in the /customer/servlet/mco/webapi/trading-document/fetchPdfStatement endpoint. The application does not properly validate whether an authenticated user is authorized to access a requested document, allowing direct retrieval based on a user-supplied identifier.
An attacker can access trading documents belonging to other users by providing a valid document ID. Although exploitation requires guessing the identifier, predictable ID patterns enable feasible enumeration, leading to unauthorized disclosure of sensitive information.
Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 25.3.3.1 but may also affect other versions.
🎖@cveNotify
cert.pl
Vulnerabilities in MyComplianceOffice MCO software
CERT Polska has received a report about 8 vulnerabilities (from CVE-2026-53902 to CVE-2026-53909) found in MyComplianceOffice MCO software.
🚨 CVE-2026-57516
Ray prior to 2.56.0 contains an unsafe deserialization vulnerability in the WebDataset reader that allows attackers to achieve remote code execution by supplying a malicious tar archive to the read_webdataset() function. The _default_decoder() function in webdataset_datasource.py unconditionally calls pickle.loads() on tar entries with .pkl/.pickle extensions and torch.load() with weights_only=False on .pt/.pth entries, executing arbitrary code inside Ray remote workers on every worker that processes the malicious archive.
🎖@cveNotify
Ray prior to 2.56.0 contains an unsafe deserialization vulnerability in the WebDataset reader that allows attackers to achieve remote code execution by supplying a malicious tar archive to the read_webdataset() function. The _default_decoder() function in webdataset_datasource.py unconditionally calls pickle.loads() on tar entries with .pkl/.pickle extensions and torch.load() with weights_only=False on .pt/.pth entries, executing arbitrary code inside Ray remote workers on every worker that processes the malicious archive.
🎖@cveNotify
GitHub
[Data] Gate unsafe deserialization in WebDataset default decoder by bveeramani · Pull Request #63469 · ray-project/ray
Description
The default decoder in read_webdataset runs pickle.loads on .pkl/.pickle files and torch.load(weights_only=False) on .pt/.pth files from attacker-controlled TAR archives, enabling arbit...
The default decoder in read_webdataset runs pickle.loads on .pkl/.pickle files and torch.load(weights_only=False) on .pt/.pth files from attacker-controlled TAR archives, enabling arbit...
🚨 CVE-2026-33845
A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service.
🎖@cveNotify
A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service.
🎖@cveNotify