🚨 CVE-2026-56209
An arbitrary address write vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows an attacker to inject an arbitrary pointer into the cyclic refresh map field via crafted image pixel values. The encoder then writes approximately 1,200 bytes at the attacker-controlled address. This is fully deterministic and does not require a separate information leak. An attacker who can supply frames to a network-facing libaom encoder with SVC enabled could exploit this for denial of service or potential code execution.

🎖@cveNotify

🚨 CVE-2026-56210
A heap-buffer-overflow read vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows setting a spatial_layer_id exceeding the configured number of layers. This causes an out-of-bounds heap read of approximately 40,728 bytes when computing a layer context array index. An attacker who can influence SVC encoder parameters in a network-facing service could exploit this for information disclosure (heap content leak) or denial of service (segmentation fault from hitting unmapped memory).

🎖@cveNotify

🚨 CVE-2026-56211
A remote code execution vulnerability was found in libaom, the reference AV1 codec implementation. Insufficient bounds validation in the AV1 encoder's SVC (Scalable Video Coding) layer ID control allows an attacker to supply crafted video frame pixels that overlap with internal encoder layer context structures. In fork-based video processing services, an attacker can use this to hijack the cyclic refresh map pointer, brute-force the process base address via a crash oracle, and redirect control flow to achieve arbitrary command execution. Exploitation requires the target service to use libaom with SVC encoding enabled and accept attacker-supplied video frames.

🎖@cveNotify

🚨 CVE-2026-52955
In the Linux kernel, the following vulnerability has been resolved:

libceph: Fix potential out-of-bounds access in crush_decode()

A message of type CEPH_MSG_OSD_MAP containing a crush map with at least
one bucket has two fields holding the bucket algorithm. If the values
in these two fields differ, an out-of-bounds access can occur. This is
the case because the first algorithm field (alg) is used to allocate
the correct amount of memory for a bucket of this type, while the second
algorithm field inside the bucket (b->alg) is used in the subsequent
processing.

This patch fixes the issue by adding a check that compares alg and
b->alg and aborts the processing in case they differ. Furthermore,
b->alg is set to 0 in this case, because the destruction of the crush
map also uses this field to determine the bucket type, which can again
result in an out-of-bounds access when trying to free the memory pointed
to by the fields of the bucket. To correctly free the memory allocated
for the bucket in such a case, the corresponding call to kfree is moved
from the algorithm-specific crush_destroy_bucket functions to the
generic crush_destroy_bucket().

🎖@cveNotify

🚨 CVE-2026-53006
In the Linux kernel, the following vulnerability has been resolved:

ipv6: fix possible UAF in icmpv6_rcv()

Caching saddr and daddr before pskb_pull() is problematic
since skb->head can change.

Remove these temporary variables:

- We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr
when net_dbg_ratelimited() is called in the slow path.

- Avoid potential future misuse after pskb_pull() call.

🎖@cveNotify

🚨 CVE-2026-53033
In the Linux kernel, the following vulnerability has been resolved:

bpf, sockmap: Take state lock for af_unix iter

When a BPF iterator program updates a sockmap, there is a race condition in
unix_stream_bpf_update_proto() where the `peer` pointer can become stale[1]
during a state transition TCP_ESTABLISHED -> TCP_CLOSE.

CPU0 bpf CPU1 close
-------- ----------
// unix_stream_bpf_update_proto()
sk_pair = unix_peer(sk)
if (unlikely(!sk_pair))
return -EINVAL;
// unix_release_sock()
skpair = unix_peer(sk);
unix_peer(sk) = NULL;
sock_put(skpair)
sock_hold(sk_pair) // UaF

More practically, this fix guarantees that the iterator program is
consistently provided with a unix socket that remains stable during
iterator execution.

[1]:
BUG: KASAN: slab-use-after-free in unix_stream_bpf_update_proto+0x155/0x490
Write of size 4 at addr ffff8881178c9a00 by task test_progs/2231
Call Trace:
dump_stack_lvl+0x5d/0x80
print_report+0x170/0x4f3
kasan_report+0xe4/0x1c0
kasan_check_range+0x125/0x200
unix_stream_bpf_update_proto+0x155/0x490
sock_map_link+0x71c/0xec0
sock_map_update_common+0xbc/0x600
sock_map_update_elem+0x19a/0x1f0
bpf_prog_bbbf56096cdd4f01_selective_dump_unix+0x20c/0x217
bpf_iter_run_prog+0x21e/0xae0
bpf_iter_unix_seq_show+0x1e0/0x2a0
bpf_seq_read+0x42c/0x10d0
vfs_read+0x171/0xb20
ksys_read+0xff/0x200
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e

Allocated by task 2236:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_slab_alloc+0x63/0x80
kmem_cache_alloc_noprof+0x1d5/0x680
sk_prot_alloc+0x59/0x210
sk_alloc+0x34/0x470
unix_create1+0x86/0x8a0
unix_stream_connect+0x318/0x15b0
__sys_connect+0xfd/0x130
__x64_sys_connect+0x72/0xd0
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e

Freed by task 2236:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x70
__kasan_slab_free+0x47/0x70
kmem_cache_free+0x11c/0x590
__sk_destruct+0x432/0x6e0
unix_release_sock+0x9b3/0xf60
unix_release+0x8a/0xf0
__sock_release+0xb0/0x270
sock_close+0x18/0x20
__fput+0x36e/0xac0
fput_close_sync+0xe5/0x1a0
__x64_sys_close+0x7d/0xd0
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e

🎖@cveNotify

🚨 CVE-2026-53081
In the Linux kernel, the following vulnerability has been resolved:

bpf: Enforce regsafe base id consistency for BPF_ADD_CONST scalars

When regsafe() compares two scalar registers that both carry
BPF_ADD_CONST, check_scalar_ids() maps their full compound id
(aka base | BPF_ADD_CONST flag) as one idmap entry. However,
it never verifies that the underlying base ids, that is, with
the flag stripped are consistent with existing idmap mappings.

This allows construction of two verifier states where the old
state has R3 = R2 + 10 (both sharing base id A) while the current
state has R3 = R4 + 10 (base id C, unrelated to R2). The idmap
creates two independent entries: A->B (for R2) and A|flag->C|flag
(for R3), without catching that A->C conflicts with A->B. State
pruning then incorrectly succeeds.

Fix this by additionally verifying base ID mapping consistency
whenever BPF_ADD_CONST is set: after mapping the compound ids,
also invoke check_ids() on the base IDs (flag bits stripped).
This ensures that if A was already mapped to B from comparing
the source register, any ADD_CONST derivative must also derive
from B, not an unrelated C.

🎖@cveNotify

🚨 CVE-2026-53085
In the Linux kernel, the following vulnerability has been resolved:

bpf: fix mm lifecycle in open-coded task_vma iterator

The open-coded task_vma iterator reads task->mm locklessly and acquires
mmap_read_trylock() but never calls mmget(). If the task exits
concurrently, the mm_struct can be freed as it is not
SLAB_TYPESAFE_BY_RCU, resulting in a use-after-free.

Safely read task->mm with a trylock on alloc_lock and acquire an mm
reference. Drop the reference via bpf_iter_mmput_async() in _destroy()
and error paths. bpf_iter_mmput_async() is a local wrapper around
mmput_async() with a fallback to mmput() on !CONFIG_MMU.

Reject irqs-disabled contexts (including NMI) up front. Operations used
by _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async)
take spinlocks with IRQs disabled (pool->lock, pi_lock). Running from
NMI or from a tracepoint that fires with those locks held could
deadlock.

A trylock on alloc_lock is used instead of the blocking task_lock()
(get_task_mm) to avoid a deadlock when a softirq BPF program iterates
a task that already holds its alloc_lock on the same CPU.

🎖@cveNotify

🚨 CVE-2026-53090
In the Linux kernel, the following vulnerability has been resolved:

bpf: Fix ld_{abs,ind} failure path analysis in subprogs

Usage of ld_{abs,ind} instructions got extended into subprogs some time
ago via commit 09b28d76eac4 ("bpf: Add abnormal return checks."). These
are only allowed in subprograms when the latter are BTF annotated and
have scalar return types.

The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 +
exit) from legacy cBPF times. While the enforcement is on scalar return
types, the verifier must also simulate the path of abnormal exit if the
packet data load via ld_{abs,ind} failed.

This is currently not the case. Fix it by having the verifier simulate
both success and failure paths, and extend it in similar ways as we do
for tail calls. The success path (r0=unknown, continue to next insn) is
pushed onto stack for later validation and the r0=0 and return to the
caller is done on the fall-through side.

🎖@cveNotify

🚨 CVE-2026-53092
In the Linux kernel, the following vulnerability has been resolved:

bpf: Fix linked reg delta tracking when src_reg == dst_reg

Consider the case of rX += rX where src_reg and dst_reg are pointers to
the same bpf_reg_state in adjust_reg_min_max_vals(). The latter first
modifies the dst_reg in-place, and later in the delta tracking, the
subsequent is_reg_const(src_reg)/reg_const_value(src_reg) reads the
post-{add,sub} value instead of the original source.

This is problematic since it sets an incorrect delta, which sync_linked_regs()
then propagates to linked registers, thus creating a verifier-vs-runtime
mismatch. Fix it by just skipping this corner case.

🎖@cveNotify

🚨 CVE-2026-48933
A flaw in Node.js WebCrypto implementation can crash the process if the input of `subtle.encrypt()` is a multiple of 2GiB.

This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**.

🎖@cveNotify

🚨 CVE-2026-58049
FFmpeg's RASC video decoder (decode_dlta in libavcodec/rasc.c) performs 32-bit reads and writes at the row cursor before the NEXT_LINE row-boundary check and validates the DLTA region in pixel rather than byte units, so a DLTA run on a PAL8 frame can access several bytes past the row allocation. A crafted media stream using the RASC FourCC, decoded by libavcodec, triggers a bitstream-controlled out-of-bounds heap write and adjacent out-of-bounds read, leading to memory corruption.

🎖@cveNotify

🚨 CVE-2025-36328
IBM watsonx.data intelligence 5.2.0, 5.2.1, 5.2.2, 5.3.0 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser.  This information could be used in further attacks against the system.

🎖@cveNotify

🚨 CVE-2025-36333
IBM watsonx.data intelligence 5.2.0, 5.2.1, 5.2.2, 5.3.0 could allow an authenticated user to perform unauthorized actions due to the improper enforcement of behavioral workflow.

🎖@cveNotify

🚨 CVE-2025-36336
IBM watsonx.data intelligence 5.2.0, 5.2.1, 5.2.2, 5.3.0 transmits data in clear text that could allow an attacker to obtain sensitive information using man in the middle techniques.

🎖@cveNotify

🚨 CVE-2026-54399
Uncontrolled Resource Consumption vulnerability in the HTTP/1.1 message parser in Apache HttpComponents Core (5.4.2 and earlier, 5.5-beta1 and earlier) allows an remote attacker to cause a denial of service through memory exhaustion by sending messages with excessive number of headers / excessive header length

🎖@cveNotify

🚨 CVE-2026-58455
Dockwatch through 0.6.567 contains an unauthenticated OS command injection vulnerability that allows remote attackers to execute arbitrary shell commands by exploiting a missing exit() after an authentication redirect in loader.php combined with unsanitized input passed to shell_exec() in ajax/compose.php. Attackers can seed the required session flag through the incomplete auth check, then inject arbitrary commands via the composePath POST parameter in the composePull action to achieve full host compromise, facilitated by the standard deployment mounting of the Docker socket.

🎖@cveNotify

🚨 CVE-2026-58466
AutoBangumi before 3.2.8 contains a hard-coded default credentials vulnerability that allows unauthenticated attackers to authenticate as the administrator by using the publicly known default credentials seeded at startup via add_default_user() in the database user module when the users table is empty. Attackers can submit the default credentials to the authentication login endpoint to gain full control of the application, including RSS feed configuration, downloader configuration, and all authenticated API endpoints.

🎖@cveNotify

🚨 CVE-2026-59093
Weaviate before 1.38.0 does not verify that a principal performing an RBAC role assignment holds the permissions granted by the assigned role. The assignRoleToUser and assignRoleToGroup handlers (POST /authz/users/{id}/assign and /authz/groups/{id}/assign) authorize only that the caller may assign roles to the target user or group, not the permissions contained in the assigned roles, unlike role creation which enforces that a user can only create roles with permissions less than or equal to its own. A user holding only the delegated assign_and_revoke_users or assign_and_revoke_groups permission can assign the built-in admin role, or any high-privilege custom role, to itself or others, escalating to full administrative control of the database.

🎖@cveNotify

🚨 CVE-2026-59099
Apereo CAS 7.3.0 before 8.0.0-RC6 contains a cryptographic vulnerability that allows remote unauthenticated attackers to recover plaintext conversation state by exploiting AES-GCM initialization vector reuse across the server lifetime. Attackers can collect multiple client-side webflow execution tokens from the unauthenticated login page and perform known-plaintext analysis to decrypt the webflow conversation state due to keystream reuse caused by a fixed all-zero IV paired with the same encryption key.

🎖@cveNotify

🚨 CVE-2026-26145
Improper access control in Azure Synapse allows an authorized attacker to elevate privileges over a network.

🎖@cveNotify