๐จ CVE-2026-32280
During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 and users of crypto/tls.
๐@cveNotify
During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 and users of crypto/tls.
๐@cveNotify
๐จ CVE-2026-32283
If one side of the TLS connection sends multiple key update messages post-handshake in a single record, the connection can deadlock, causing uncontrolled consumption of resources. This can lead to a denial of service. This only affects TLS 1.3.
๐@cveNotify
If one side of the TLS connection sends multiple key update messages post-handshake in a single record, the connection can deadlock, causing uncontrolled consumption of resources. This can lead to a denial of service. This only affects TLS 1.3.
๐@cveNotify
๐จ CVE-2026-33810
When verifying a certificate chain containing excluded DNS constraints, these constraints are not correctly applied to wildcard DNS SANs which use a different case than the constraint. This only affects validation of otherwise trusted certificate chains, issued by a root CA in the VerifyOptions.Roots CertPool, or in the system certificate pool.
๐@cveNotify
When verifying a certificate chain containing excluded DNS constraints, these constraints are not correctly applied to wildcard DNS SANs which use a different case than the constraint. This only affects validation of otherwise trusted certificate chains, issued by a root CA in the VerifyOptions.Roots CertPool, or in the system certificate pool.
๐@cveNotify
๐จ CVE-2026-34486
Missing Encryption of Sensitive Data vulnerability in Apache Tomcat due to the fix for CVE-2026-29146 allowing the bypass of the EncryptInterceptor.
This issue affects Apache Tomcat: 11.0.20, 10.1.53, 9.0.116.
Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117, which fix the issue.
๐@cveNotify
Missing Encryption of Sensitive Data vulnerability in Apache Tomcat due to the fix for CVE-2026-29146 allowing the bypass of the EncryptInterceptor.
This issue affects Apache Tomcat: 11.0.20, 10.1.53, 9.0.116.
Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117, which fix the issue.
๐@cveNotify
๐จ CVE-2026-31419
In the Linux kernel, the following vulnerability has been resolved:
net: bonding: fix use-after-free in bond_xmit_broadcast()
bond_xmit_broadcast() reuses the original skb for the last slave
(determined by bond_is_last_slave()) and clones it for others.
Concurrent slave enslave/release can mutate the slave list during
RCU-protected iteration, changing which slave is "last" mid-loop.
This causes the original skb to be double-consumed (double-freed).
Replace the racy bond_is_last_slave() check with a simple index
comparison (i + 1 == slaves_count) against the pre-snapshot slave
count taken via READ_ONCE() before the loop. This preserves the
zero-copy optimization for the last slave while making the "last"
determination stable against concurrent list mutations.
The UAF can trigger the following crash:
==================================================================
BUG: KASAN: slab-use-after-free in skb_clone
Read of size 8 at addr ffff888100ef8d40 by task exploit/147
CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:597)
skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334)
bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593)
dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887)
__dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838)
ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136)
ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219)
ip6_output (net/ipv6/ip6_output.c:250)
ip6_send_skb (net/ipv6/ip6_output.c:1985)
udp_v6_send_skb (net/ipv6/udp.c:1442)
udpv6_sendmsg (net/ipv6/udp.c:1733)
__sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Allocated by task 147:
Freed by task 147:
The buggy address belongs to the object at ffff888100ef8c80
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 192 bytes inside of
freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60)
Memory state around the buggy address:
ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
๐@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net: bonding: fix use-after-free in bond_xmit_broadcast()
bond_xmit_broadcast() reuses the original skb for the last slave
(determined by bond_is_last_slave()) and clones it for others.
Concurrent slave enslave/release can mutate the slave list during
RCU-protected iteration, changing which slave is "last" mid-loop.
This causes the original skb to be double-consumed (double-freed).
Replace the racy bond_is_last_slave() check with a simple index
comparison (i + 1 == slaves_count) against the pre-snapshot slave
count taken via READ_ONCE() before the loop. This preserves the
zero-copy optimization for the last slave while making the "last"
determination stable against concurrent list mutations.
The UAF can trigger the following crash:
==================================================================
BUG: KASAN: slab-use-after-free in skb_clone
Read of size 8 at addr ffff888100ef8d40 by task exploit/147
CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:597)
skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334)
bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593)
dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887)
__dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838)
ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136)
ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219)
ip6_output (net/ipv6/ip6_output.c:250)
ip6_send_skb (net/ipv6/ip6_output.c:1985)
udp_v6_send_skb (net/ipv6/udp.c:1442)
udpv6_sendmsg (net/ipv6/udp.c:1733)
__sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Allocated by task 147:
Freed by task 147:
The buggy address belongs to the object at ffff888100ef8c80
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 192 bytes inside of
freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60)
Memory state around the buggy address:
ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
๐@cveNotify
๐จ CVE-2026-4786
Mitgation of CVE-2026-4519 was incomplete. If the URL contained "%action" the mitigation could be bypassed for certain browser types the "webbrowser.open()" API could have commands injected into the underlying shell. See CVE-2026-4519 for details.
๐@cveNotify
Mitgation of CVE-2026-4519 was incomplete. If the URL contained "%action" the mitigation could be bypassed for certain browser types the "webbrowser.open()" API could have commands injected into the underlying shell. See CVE-2026-4519 for details.
๐@cveNotify
GitHub
[3.14] gh-148169: Fix webbrowser `%action` substitution bypass of dasโฆ ยท python/cpython@28b4ad3
โฆh-prefix check (GH-148170) (#148516)
Co-authored-by: Stan Ulbrych <stan@python.org>
Co-authored-by: Stan Ulbrych <stan@python.org>
๐จ CVE-2026-41316
ERB is a templating system for Ruby. Ruby 2.7.0 (before ERB 2.2.0 was published on rubygems.org) introduced an `@_init` instance variable guard in `ERB#result` and `ERB#run` to prevent code execution when an ERB object is reconstructed via `Marshal.load` (deserialization). However, three other public methods that also evaluate `@src` via `eval()` were not given the same guard: `ERB#def_method`, `ERB#def_module`, and `ERB#def_class`. An attacker who can trigger `Marshal.load` on untrusted data in a Ruby application that has `erb` loaded can use `ERB#def_module` (zero-arg, default parameters) as a code execution sink, bypassing the `@_init` protection entirely. ERB 4.0.3.1, 4.0.4.1, 6.0.1.1, and 6.0.4 patch the issue.
๐@cveNotify
ERB is a templating system for Ruby. Ruby 2.7.0 (before ERB 2.2.0 was published on rubygems.org) introduced an `@_init` instance variable guard in `ERB#result` and `ERB#run` to prevent code execution when an ERB object is reconstructed via `Marshal.load` (deserialization). However, three other public methods that also evaluate `@src` via `eval()` were not given the same guard: `ERB#def_method`, `ERB#def_module`, and `ERB#def_class`. An attacker who can trigger `Marshal.load` on untrusted data in a Ruby application that has `erb` loaded can use `ERB#def_module` (zero-arg, default parameters) as a code execution sink, bypassing the `@_init` protection entirely. ERB 4.0.3.1, 4.0.4.1, 6.0.1.1, and 6.0.4 patch the issue.
๐@cveNotify
GitHub
ERB @_init deserialization guard bypass via def_module / def_method / def_class
## Summary
Ruby 2.7.0 (before ERB 2.2.0 was published on rubygems.org) introduced an `@_init` instance variable guard in `ERB#result` and `ERB#run` to prevent code execution when an ERB object i...
Ruby 2.7.0 (before ERB 2.2.0 was published on rubygems.org) introduced an `@_init` instance variable guard in `ERB#result` and `ERB#run` to prevent code execution when an ERB object i...
๐จ CVE-2026-43868
Memory Allocation with Excessive Size Value vulnerability in Apache Thrift.
This issue affects Apache Thrift: before 0.23.0.
Users are recommended to upgrade to version 0.23.0, which fixes the issue.
๐@cveNotify
Memory Allocation with Excessive Size Value vulnerability in Apache Thrift.
This issue affects Apache Thrift: before 0.23.0.
Users are recommended to upgrade to version 0.23.0, which fixes the issue.
๐@cveNotify
๐จ CVE-2026-43125
In the Linux kernel, the following vulnerability has been resolved:
dlm: validate length in dlm_search_rsb_tree
The len parameter in dlm_dump_rsb_name() is not validated and comes
from network messages. When it exceeds DLM_RESNAME_MAXLEN, it can
cause out-of-bounds write in dlm_search_rsb_tree().
Add length validation to prevent potential buffer overflow.
๐@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
dlm: validate length in dlm_search_rsb_tree
The len parameter in dlm_dump_rsb_name() is not validated and comes
from network messages. When it exceeds DLM_RESNAME_MAXLEN, it can
cause out-of-bounds write in dlm_search_rsb_tree().
Add length validation to prevent potential buffer overflow.
๐@cveNotify
๐จ CVE-2026-43198
In the Linux kernel, the following vulnerability has been resolved:
tcp: fix potential race in tcp_v6_syn_recv_sock()
Code in tcp_v6_syn_recv_sock() after the call to tcp_v4_syn_recv_sock()
is done too late.
After tcp_v4_syn_recv_sock(), the child socket is already visible
from TCP ehash table and other cpus might use it.
Since newinet->pinet6 is still pointing to the listener ipv6_pinfo
bad things can happen as syzbot found.
Move the problematic code in tcp_v6_mapped_child_init()
and call this new helper from tcp_v4_syn_recv_sock() before
the ehash insertion.
This allows the removal of one tcp_sync_mss(), since
tcp_v4_syn_recv_sock() will call it with the correct
context.
๐@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
tcp: fix potential race in tcp_v6_syn_recv_sock()
Code in tcp_v6_syn_recv_sock() after the call to tcp_v4_syn_recv_sock()
is done too late.
After tcp_v4_syn_recv_sock(), the child socket is already visible
from TCP ehash table and other cpus might use it.
Since newinet->pinet6 is still pointing to the listener ipv6_pinfo
bad things can happen as syzbot found.
Move the problematic code in tcp_v6_mapped_child_init()
and call this new helper from tcp_v4_syn_recv_sock() before
the ehash insertion.
This allows the removal of one tcp_sync_mss(), since
tcp_v4_syn_recv_sock() will call it with the correct
context.
๐@cveNotify
๐จ CVE-2026-41672
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. In @xmldom/xmldom prior to versions 0.9.10 and 0.8.13 and xmldom version 0.6.0 and prior, the package allows attacker-controlled comment content to be serialized into XML without validating or neutralizing comment-breaking sequences. As a result, an attacker can terminate the comment early and inject arbitrary XML nodes into the serialized output. This issue has been patched in versions @xmldom/xmldom versions 0.9.10 and 0.8.13.
๐@cveNotify
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. In @xmldom/xmldom prior to versions 0.9.10 and 0.8.13 and xmldom version 0.6.0 and prior, the package allows attacker-controlled comment content to be serialized into XML without validating or neutralizing comment-breaking sequences. As a result, an attacker can terminate the comment early and inject arbitrary XML nodes into the serialized output. This issue has been patched in versions @xmldom/xmldom versions 0.9.10 and 0.8.13.
๐@cveNotify
GitHub
fix: prevent XML injection via unsafe comment serialization (GHSA-j75โฆ ยท xmldom/xmldom@b397540
โฆ9-j44w-7fr8)
When `requireWellFormed: true` is passed to `XMLSerializer.prototype.serializeToString`
or `node.toString`, the serializer now throws `InvalidStateError` if a Comment node's
...
When `requireWellFormed: true` is passed to `XMLSerializer.prototype.serializeToString`
or `node.toString`, the serializer now throws `InvalidStateError` if a Comment node's
...
๐จ CVE-2026-41673
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. In @xmldom/xmldom prior to versions 0.9.10 and 0.8.13 and xmldom version 0.6.0 and prior, seven recursive traversals in lib/dom.js operate without a depth limit. A sufficiently deeply nested DOM tree causes a RangeError: Maximum call stack size exceeded, crashing the application. This issue has been patched in versions @xmldom/xmldom versions 0.9.10 and 0.8.13.
๐@cveNotify
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. In @xmldom/xmldom prior to versions 0.9.10 and 0.8.13 and xmldom version 0.6.0 and prior, seven recursive traversals in lib/dom.js operate without a depth limit. A sufficiently deeply nested DOM tree causes a RangeError: Maximum call stack size exceeded, crashing the application. This issue has been patched in versions @xmldom/xmldom versions 0.9.10 and 0.8.13.
๐@cveNotify
GitHub
refactor: migrate serializeToString to walkDOM ยท xmldom/xmldom@17678a2
Replace the recursive `serializeToString` with a walkDOM-based
implementation. The `enter` handler emits opening markup and returns a
child context `{ ns, tag }` for elements that need a closing ta...
implementation. The `enter` handler emits opening markup and returns a
child context `{ ns, tag }` for elements that need a closing ta...
๐จ CVE-2026-41675
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. In @xmldom/xmldom prior to versions 0.9.10 and 0.8.13 and xmldom version 0.6.0 and prior, the package allows attacker-controlled processing instruction data to be serialized into XML without validating or neutralizing the PI-closing sequence ?>. As a result, an attacker can terminate the processing instruction early and inject arbitrary XML nodes into the serialized output. This issue has been patched in versions @xmldom/xmldom versions 0.9.10 and 0.8.13.
๐@cveNotify
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. In @xmldom/xmldom prior to versions 0.9.10 and 0.8.13 and xmldom version 0.6.0 and prior, the package allows attacker-controlled processing instruction data to be serialized into XML without validating or neutralizing the PI-closing sequence ?>. As a result, an attacker can terminate the processing instruction early and inject arbitrary XML nodes into the serialized output. This issue has been patched in versions @xmldom/xmldom versions 0.9.10 and 0.8.13.
๐@cveNotify
GitHub
fix: prevent XML injection via unsafe PI serialization (GHSA-x6wf-f3pโฆ ยท xmldom/xmldom@7207a4b
โฆx-wcqx)
When `requireWellFormed: true`, the serializer now throws `InvalidStateError` in the
`PROCESSING_INSTRUCTION_NODE` case for three conditions (W3C DOM Parsing ยง3.2.1.7):
1. The PI target ...
When `requireWellFormed: true`, the serializer now throws `InvalidStateError` in the
`PROCESSING_INSTRUCTION_NODE` case for three conditions (W3C DOM Parsing ยง3.2.1.7):
1. The PI target ...
๐จ CVE-2026-33811
When using LookupCNAME with the cgo DNS resolver, a very long CNAME response can trigger a double-free of C memory and a crash.
๐@cveNotify
When using LookupCNAME with the cgo DNS resolver, a very long CNAME response can trigger a double-free of C memory and a crash.
๐@cveNotify
๐จ CVE-2026-33814
When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0.
๐@cveNotify
When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0.
๐@cveNotify
๐จ CVE-2026-42499
Pathological inputs could cause DoS through consumePhrase when parsing an email address according to RFC 5322.
๐@cveNotify
Pathological inputs could cause DoS through consumePhrase when parsing an email address according to RFC 5322.
๐@cveNotify
๐จ CVE-2026-42264
Axios is a promise based HTTP client for the browser and Node.js. From version 1.0.0 to before version 1.15.2, fFive config properties (auth, baseURL, socketPath, beforeRedirect, and insecureHTTPParser) in the HTTP adapter are read via direct property access without hasOwnProperty guards, making them exploitable as prototype pollution gadgets. When Object.prototype is polluted by another dependency in the same process, axios silently picks up these polluted values on every outbound HTTP request. This issue has been patched in version 1.15.2.
๐@cveNotify
Axios is a promise based HTTP client for the browser and Node.js. From version 1.0.0 to before version 1.15.2, fFive config properties (auth, baseURL, socketPath, beforeRedirect, and insecureHTTPParser) in the HTTP adapter are read via direct property access without hasOwnProperty guards, making them exploitable as prototype pollution gadgets. When Object.prototype is polluted by another dependency in the same process, axios silently picks up these polluted values on every outbound HTTP request. This issue has been patched in version 1.15.2.
๐@cveNotify
GitHub
fix: more header pollutions (#10779) ยท axios/axios@4791514
* fix: more header pollutions
* fix: more header pollution issues
* fix: cubic feedback
* fix: prototype test
* fix: more header pollution issues
* fix: cubic feedback
* fix: prototype test
๐จ CVE-2026-42246
Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Prior to versions 0.3.10, 0.4.24, 0.5.14, and 0.6.4, a man-in-the-middle attacker can cause Net::IMAP#starttls to return "successfully", without starting TLS. This issue has been patched in versions 0.3.10, 0.4.24, 0.5.14, and 0.6.4.
๐@cveNotify
Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Prior to versions 0.3.10, 0.4.24, 0.5.14, and 0.6.4, a man-in-the-middle attacker can cause Net::IMAP#starttls to return "successfully", without starting TLS. This issue has been patched in versions 0.3.10, 0.4.24, 0.5.14, and 0.6.4.
๐@cveNotify
GitHub
๐ Merge pull request #664 from ruby/security/STARTTLS-stripping ยท ruby/net-imap@0ede4c4
๐ Fix STARTTLS stripping vulnerability
๐จ CVE-2026-42258
Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Prior to versions 0.4.24, 0.5.14, and 0.6.4, symbol arguments to commands are vulnerable to a CRLF Injection / IMAP Command injection via Symbol arguments passed to IMAP commands. This issue has been patched in versions 0.4.24, 0.5.14, and 0.6.4.
๐@cveNotify
Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Prior to versions 0.4.24, 0.5.14, and 0.6.4, symbol arguments to commands are vulnerable to a CRLF Injection / IMAP Command injection via Symbol arguments passed to IMAP commands. This issue has been patched in versions 0.4.24, 0.5.14, and 0.6.4.
๐@cveNotify
GitHub
Release v0.4.24 ยท ruby/net-imap
ImportantThe 0.4.x release branch will only receive security fixes, and will be unsupported when ruby 3.3 is EOL.
Please upgrade to a newer version.
What's Changed
๐ Security
This release cont...
Please upgrade to a newer version.
What's Changed
๐ Security
This release cont...
๐จ CVE-2026-42338
ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.1.1, Address6.group() and Address6.link() do not HTML-escape attacker-controlled content before embedding it in the HTML strings they return, and AddressError.parseMessage (emitted by the Address6 constructor for invalid input) can contain unescaped attacker-controlled content in one branch. An application that (1) passes untrusted input to Address6 and (2) renders the output of these methods, or the thrown error's parseMessage, as HTML (e.g. via innerHTML) is vulnerable to cross-site scripting. This vulnerability is fixed in 10.1.1.
๐@cveNotify
ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.1.1, Address6.group() and Address6.link() do not HTML-escape attacker-controlled content before embedding it in the HTML strings they return, and AddressError.parseMessage (emitted by the Address6 constructor for invalid input) can contain unescaped attacker-controlled content in one branch. An application that (1) passes untrusted input to Address6 and (2) renders the output of these methods, or the thrown error's parseMessage, as HTML (e.g. via innerHTML) is vulnerable to cross-site scripting. This vulnerability is fixed in 10.1.1.
๐@cveNotify
GitHub
XSS in Address6 HTML-emitting methods
### Summary
`Address6.group()` and `Address6.link()` do not HTML-escape attacker-controlled content before embedding it in the HTML strings they return, and `AddressError.parseMessage` (emitted ...
`Address6.group()` and `Address6.link()` do not HTML-escape attacker-controlled content before embedding it in the HTML strings they return, and `AddressError.parseMessage` (emitted ...
๐จ CVE-2026-42266
JupyterLab is an extensible environment for interactive and reproducible computing, based on the Jupyter Notebook Architecture. From 4.0.0 to 4.5.6, the allow-list of extensions that can be installed from PyPI Extension Manager (allowed_extensions_uris) is not correctly enforced by JupyterLab. The PyPI Extension Manager was not contained to packages listed on the default PyPI index. This vulnerability is fixed in 4.5.7.
๐@cveNotify
JupyterLab is an extensible environment for interactive and reproducible computing, based on the Jupyter Notebook Architecture. From 4.0.0 to 4.5.6, the allow-list of extensions that can be installed from PyPI Extension Manager (allowed_extensions_uris) is not correctly enforced by JupyterLab. The PyPI Extension Manager was not contained to packages listed on the default PyPI index. This vulnerability is fixed in 4.5.7.
๐@cveNotify
GitHub
Release v4.5.7 ยท jupyterlab/jupyterlab
4.5.7
(Full Changelog)
Security patches
CVE-2026-42557 GHSA-mqcg-5x36-vfcg
CVE-2026-42266 GHSA-37w4-hwhx-4rc4
CVE-2026-40171 GHSA-rch3-82jr-f9w9
Bugs fixed
Video and Audio Content Providers: Fix...
(Full Changelog)
Security patches
CVE-2026-42557 GHSA-mqcg-5x36-vfcg
CVE-2026-42266 GHSA-37w4-hwhx-4rc4
CVE-2026-40171 GHSA-rch3-82jr-f9w9
Bugs fixed
Video and Audio Content Providers: Fix...