🚨 CVE-2026-48204
Improper Input Validation, Improper Access Control vulnerability in Apache Camel in Camel Mongodb Gridfs component.

The camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint's operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFS_OPERATION, GRIDFS_OBJECT_ID, GRIDFS_METADATA, GRIDFS_CHUNKSIZE, GRIDFS_FILE_ID_PRODUCED) were the plain strings gridfs.operation, gridfs.objectid, gridfs.metadata, gridfs.chunksize and gridfs.fileid. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a mongodb-gridfs: producer with no explicit operation, any HTTP client could therefore set the gridfs.operation header to override the route's intended operation - switching, for example, a file upload to remove (deleting a file identified by the attacker-supplied gridfs.objectid), listAll (enumerating every file in the bucket) or findOne (reading a file) - and supply a gridfs.metadata value that is parsed as a MongoDB document, enabling NoSQL operator injection. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive GridFS operations or metadata via the raw header names must use CamelGridFsOperation / CamelGridFsObjectId / CamelGridFsMetadata / CamelGridFsChunkSize / CamelGridFsFileId instead of the gridfs.* names. For deployments that cannot upgrade immediately, set an explicit operation on the mongodb-gridfs: endpoint so the operation is not taken from a header, and strip the gridfs.* headers from any untrusted ingress before the producer.

🎖@cveNotify

🚨 CVE-2026-48205
Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel DNS component.

The camel-dns producers read DNS operation parameters - the resolver to query, the name or domain to look up, the record type and class, and the search term - from Exchange message headers whose constant values (DnsConstants.DNS_SERVER, DNS_NAME, DNS_DOMAIN, DNS_TYPE, DNS_CLASS, TERM) were the plain strings dns.server, dns.name, dns.domain, dns.type, dns.class and term. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a dns: producer, any HTTP client could therefore set the dns.server header to make the dig producer build a SimpleResolver pointing at an attacker-controlled DNS server - a server-side request forgery via DNS, through which the attacker observes the queried name and can return poisoned responses - and set the dns.name / dns.domain headers to resolve arbitrary internal hostnames, disclosing whether they exist (internal network reconnaissance). No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive DNS operations via the raw header names must use CamelDnsServer / CamelDnsName / CamelDnsDomain / CamelDnsType / CamelDnsClass / CamelDnsTerm instead of the dns.* / term names. For deployments that cannot upgrade immediately, strip the dns.* and term headers from any untrusted ingress before the dns: producer, and set the DNS server and lookup parameters from a trusted source in the route.

🎖@cveNotify

🚨 CVE-2026-49086
Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel DAPR component.

The camel-dapr Dapr Pub/Sub consumer (DaprPubSubConsumer) copied two fields from each inbound CloudEvent - its Pub/Sub component name and its topic - into the CamelDaprPubSubName and CamelDaprTopic Exchange headers. These two headers are producer-direction routing headers: when the route republishes through a Dapr producer, DaprConfigurationOptionsProxy reads them back and prefers them over the destination configured on the endpoint. As a result, in a route that consumes from one Dapr Pub/Sub topic and republishes to another (for example from('dapr-pubsub:p:t').to('dapr-pubsub:p:other')), an actor able to publish a message to the subscribed topic could set the CloudEvent's pub/sub-name and topic to values of their choosing and cause the re-published message to be delivered to an arbitrary Dapr Pub/Sub component and topic instead of the configured destination - redirecting or exfiltrating the message and bypassing the route's intended routing and any topic-level access controls in the underlying broker. Exploitation requires the ability to publish to the topic the route subscribes to; no other authentication or user interaction is needed.
This issue affects Apache Camel: from 4.12.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, remove the CamelDaprPubSubName and CamelDaprTopic headers from the Exchange between the Dapr consumer and any Dapr producer in the route (for example removeHeaders('CamelDaprPubSubName', 'CamelDaprTopic')), and restrict who can publish to the subscribed Dapr Pub/Sub topic so that only trusted producers can send to it.

🎖@cveNotify

🚨 CVE-2026-49097
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel IRC component.

The camel-irc producer chooses the destination of an outgoing IRC message from the irc.sendTo Exchange header (the constant IrcConstants.IRC_SEND_TO, value irc.sendTo); when that header is present it overrides the channel list configured on the endpoint, and the message is sent only to the specified destination. This and the component's other control headers (irc.target, irc.messageType, irc.user.*, irc.num, irc.value) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into an irc: producer, any HTTP client could therefore set the irc.sendTo header and redirect a message that the route intended for a configured channel to an arbitrary IRC channel or user - exfiltrating the message content to an attacker-chosen nickname, leaking it into a public channel, or delivering messages that appear to come from the bot. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set IRC headers via the raw header names must use the CamelIrc* names (for example CamelIrcSendTo) instead of the old irc.* values. For deployments that cannot upgrade immediately, strip the irc.* headers from any untrusted ingress before the irc: producer (for example removeHeaders('irc.*') at the start of the route), and set the IRC destination from a trusted source.

🎖@cveNotify

🚨 CVE-2026-49098
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel Kafka Component.

The camel-kafka producer can override its configured target topic at runtime from the kafka.OVERRIDE_TOPIC Exchange header: KafkaProducer.evaluateTopic() returns the header value in preference to the topic configured on the endpoint. The control-header constants in KafkaConstants (for example OVERRIDE_TOPIC = kafka.OVERRIDE_TOPIC, OVERRIDE_TIMESTAMP = kafka.OVERRIDE_TIMESTAMP, PARTITION_KEY = kafka.PARTITION_KEY) used plain, non-Camel-prefixed values. camel-kafka's own KafkaHeaderFilterStrategy does filter the kafka.* namespace, but only on the Kafka-to-Exchange serialization boundary (reading Kafka record headers into the Exchange, and writing Exchange headers into a Kafka record); it does not apply to headers that arrive from an upstream consumer in a multi-component route. The upstream HTTP consumer uses HttpHeaderFilterStrategy, which blocks only the Camel / camel namespace, so a kafka.* header passes through unfiltered. As a result, in a route that bridges an HTTP consumer (for example platform-http) into a kafka: producer, any HTTP client could set the kafka.OVERRIDE_TOPIC header and cause the message to be published to an arbitrary Kafka topic instead of the configured one - redirecting it to a sensitive internal topic, or injecting attacker-crafted messages into a topic consumed by a critical downstream service. The related kafka.OVERRIDE_TIMESTAMP and kafka.PARTITION_KEY headers could likewise be injected to backdate messages or target specific partitions. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set or read Kafka headers via the raw header names must use the CamelKafka* names (for example CamelKafkaOverrideTopic and CamelKafkaTopic) instead of the old kafka.* values. For deployments that cannot upgrade immediately, strip the kafka.* headers from any untrusted ingress before the kafka: producer (for example removeHeaders('kafka.*') at the start of the route), and set the target topic from a trusted source.

🎖@cveNotify

🚨 CVE-2026-49099
Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Salesforce Component.

The camel-salesforce producer resolves its operation parameters - the SOQL query, the SOSL search, the target SObject name and id, the Apex REST URL and method, and the Apex query parameters - from Exchange message headers, reading the header in preference to the value configured on the endpoint (AbstractSalesforceProcessor.getParameter() reads the header first and uses the endpoint configuration only as a fallback). The control-header constants in SalesforceEndpointConfig (for example SOBJECT_QUERY = sObjectQuery, SOBJECT_SEARCH = sObjectSearch, SOBJECT_NAME = sObjectName, SOBJECT_ID = sObjectId, APEX_URL = apexUrl, APEX_METHOD = apexMethod, and the apexQueryParam. prefix) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a salesforce: producer, any HTTP client could therefore set these headers and override what the route intended - supplying its own SOQL query or SOSL search to read data from any SObject the connected Salesforce user can access, overriding the target SObject name and id for CRUD operations, or redirecting an Apex REST call to a different endpoint and HTTP method (including destructive methods) with injected query parameters. All such operations run with the full permissions of the Salesforce connected (integration) user, which is typically broad. No credentials are required from the attacker when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Salesforce operation parameters via the raw header names must use the CamelSalesforce* names (for example CamelSalesforceSObjectQuery and CamelSalesforceApexUrl) instead of the old sObject* / apex* values; the endpoint-option spelling is unchanged. For deployments that cannot upgrade immediately, strip the Salesforce control headers from any untrusted ingress before the salesforce: producer (for example removeHeaders('sObject*') and removeHeaders('apex*') at the start of the route), and set the query, SObject and Apex parameters from a trusted source.

🎖@cveNotify

🚨 CVE-2026-49365
Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Netty HTTP component.

The camel-netty-http HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false because the backing field was an uninitialised primitive boolean (Java's default of false), whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain (via DefaultNettyHttpBinding) instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application's internal structure, which an attacker can use to plan further attacks.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-netty-http consumer (for example netty-http: http://0.0.0.0:8080/api?muteException=true , or globally via the camel.component.netty-http.configuration.mute-exception=true property), so that processing errors no longer return the stack trace to the client.

🎖@cveNotify

🚨 CVE-2026-53913
Improper Authentication, Missing Authentication for Critical Function, Not Failing Securely ('Failing Open') vulnerability in Apache Camel Keycloak Component.

The KeycloakSecurityPolicy of camel-keycloak guards a route by running KeycloakSecurityProcessor.beforeProcess(), which performs three checks in sequence: it rejects a request that carries no access token, then - only if requiredRoles is non-empty - validates the roles, and - only if requiredPermissions is non-empty - validates the permissions. The actual cryptographic verification of the bearer access token (signature, issuer and expiry for a local JWT, or active-state and issuer for token introspection) is performed exclusively inside those role and permission checks. KeycloakSecurityPolicy defaults requiredRoles and requiredPermissions to empty - which is the documented 'Basic Setup' - so on a route configured that way the role and permission checks are skipped and the access token is therefore never verified. The token-presence check still rejects a missing token, but an invalid token is accepted: any non-null value in the Authorization: Bearer header - including an arbitrary string or a forged, unsigned JWT - passes the policy and the request reaches the protected route, with no signature, issuer or expiry check and no request to Keycloak. The token is read from the inbound request header because allowTokenFromHeader defaults to true. Because the normal reason to place a route behind this policy is that the route performs server-side work, the bypass results in unauthenticated access to that work; where the protected route forwards to a code-execution-capable producer, it can result in unauthenticated remote code execution. This defect is independent of CVE-2026-23552: that issue concerned the issuer claim and was fixed by adding a check inside the verification routine, but here the verification routine is not reached at all in the default configuration, so the defect remains.
This issue affects Apache Camel: from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, configure a non-empty requiredRoles or requiredPermissions on every KeycloakSecurityPolicy so that the token-verification path is exercised, set allowTokenFromHeader to false where the token is not expected from the request header, or perform token verification at the framework layer ahead of the policy.

🎖@cveNotify

🚨 CVE-2026-55993
Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Atmosphere Websocket Component.

The camel-atmosphere-websocket consumer mapped inbound WebSocket query parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (WebsocketConsumer.sendEventNotification() iterates the query-string map collected in WebsocketConsumer.service() and copies each entry into the Exchange). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the consumer apply the HeaderFilterStrategy it already inherits from the HTTP/servlet stack, filtering the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.

🎖@cveNotify

🚨 CVE-2026-55994
Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Iggy component.

The camel-iggy consumer mapped the user-headers of inbound Iggy messages into the Camel Exchange header map without applying any HeaderFilterStrategy (IggyFetchRecords copied the message user-headers straight into the Exchange). Because nothing blocked the Camel header namespace, an actor able to publish to the consumed Iggy stream/topic could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as message user-headers. In a route where the Iggy consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets.
This issue affects Apache Camel: from 4.17.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds a dedicated IggyHeaderFilterStrategy (and a headerFilterStrategy endpoint option) that filters the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), restrict who can publish to the consumed Iggy stream/topic, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.

🎖@cveNotify

🚨 CVE-2026-56139
Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Undertow Component.

The camel-undertow HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false, whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application's internal structure, which an attacker can use to plan further attacks. In addition, for Rest DSL consumers the muteException option was not honoured at all: the RestUndertowHttpBinding was created with a hard-coded false, so the stack trace was returned even when muteException=true had been configured.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-undertow consumer (for example undertow: http://0.0.0.0:8080/api?muteException=true , or globally via the camel.component.undertow.mute-exception=true property), so that processing errors no longer return the stack trace to the client; note that on affected releases this workaround does not cover Rest DSL consumers, whose binding ignores the option until the fix is applied.

🎖@cveNotify

🚨 CVE-2026-56140
Improper Input Validation vulnerability in Apache Camel AWS SNS component.


The camel-aws2-sns component filters Camel headers through a component-specific HeaderFilterStrategy, Sns2HeaderFilterStrategy. Like the sibling Sqs2HeaderFilterStrategy, it originally configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers from being written out) and did not configure an inbound filter rule. For the related camel-aws2-sqs component this inbound gap was exploitable, because the Sqs2Consumer maps inbound SQS message attributes into the Camel Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, allowing a message sender to inject Camel control headers (tracked as CVE-2026-46456). camel-aws2-sns, by contrast, is producer-only: Sns2Endpoint does not support consumers (createConsumer throws UnsupportedOperationException, 'You cannot receive messages from this endpoint'), so no externally-supplied message attributes are ever mapped inbound into a Camel Exchange through SNS, and the missing inbound filter rule on Sns2HeaderFilterStrategy was therefore not reachable by an attacker. As part of the same fix (CAMEL-23506), an inbound filter rule (setInFilterStartsWith for the Camel namespace) was added to Sns2HeaderFilterStrategy so that its configuration matches the corrected Sqs2HeaderFilterStrategy and the other sibling strategies. This is a defense-in-depth alignment with no known exploit path in camel-aws2-sns.


This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

This is a defense-in-depth hardening change with no known exploit path in camel-aws2-sns, which is producer-only, so no urgent action or workaround is required. Users who want the aligned behaviour can upgrade to version 4.21.0, or to 4.14.8 on the 4.14.x LTS releases stream, or to 4.18.3 on the 4.18.x releases stream, which contain the change. As a general best practice, operators should continue to apply least-privilege IAM permissions on their SNS topics.

🎖@cveNotify

🚨 CVE-2026-9165
A flaw was found in Red Hat Advanced Cluster Security for Kubernetes (RHACS). Central does not limit the depth of GraphQL queries served on the authenticated GraphQL API. An authenticated user with a valid API token can send deeply nested queries that cause excessive resource consumption in Central, resulting in a denial of service for the management plane.

🎖@cveNotify

🚨 CVE-2026-14795
A vulnerability has been found in CodeAstro Apartment Visitor Management System 1.0. Affected by this issue is some unknown functionality of the file /apartment-visitor/action-visitor.php. Such manipulation of the argument remark leads to sql injection. The attack may be performed from remote. The exploit has been disclosed to the public and may be used.

🎖@cveNotify

🚨 CVE-2026-14796
A vulnerability was found in CodeAstro Apartment Visitor Management System 1.0. This affects an unknown part of the file /apartment-visitor/report.php. Performing a manipulation of the argument fromdate results in sql injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used.

🎖@cveNotify

🚨 CVE-2026-14797
A vulnerability was determined in CodeAstro Apartment Visitor Management System 1.0. This vulnerability affects unknown code of the file /apartment-visitor/edit-apartment.php. Executing a manipulation of the argument editid can lead to sql injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized.

🎖@cveNotify

🚨 CVE-2026-14798
A vulnerability was identified in CodeAstro Apartment Visitor Management System 1.0. This issue affects some unknown processing of the file /apartment-visitor/visitor-entry.php. The manipulation of the argument visname leads to sql injection. The attack can be initiated remotely. The exploit is publicly available and might be used.

🎖@cveNotify

🚨 CVE-2026-14799
A security flaw has been discovered in CodeAstro Ecommerce Website 1.0. Impacted is an unknown function of the file /customer/my_account.php?my_wishlist. The manipulation of the argument delete_wishlist results in sql injection. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks.

🎖@cveNotify

🚨 CVE-2026-49098
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel Kafka Component.

The camel-kafka producer can override its configured target topic at runtime from the kafka.OVERRIDE_TOPIC Exchange header: KafkaProducer.evaluateTopic() returns the header value in preference to the topic configured on the endpoint. The control-header constants in KafkaConstants (for example OVERRIDE_TOPIC = kafka.OVERRIDE_TOPIC, OVERRIDE_TIMESTAMP = kafka.OVERRIDE_TIMESTAMP, PARTITION_KEY = kafka.PARTITION_KEY) used plain, non-Camel-prefixed values. camel-kafka's own KafkaHeaderFilterStrategy does filter the kafka.* namespace, but only on the Kafka-to-Exchange serialization boundary (reading Kafka record headers into the Exchange, and writing Exchange headers into a Kafka record); it does not apply to headers that arrive from an upstream consumer in a multi-component route. The upstream HTTP consumer uses HttpHeaderFilterStrategy, which blocks only the Camel / camel namespace, so a kafka.* header passes through unfiltered. As a result, in a route that bridges an HTTP consumer (for example platform-http) into a kafka: producer, any HTTP client could set the kafka.OVERRIDE_TOPIC header and cause the message to be published to an arbitrary Kafka topic instead of the configured one - redirecting it to a sensitive internal topic, or injecting attacker-crafted messages into a topic consumed by a critical downstream service. The related kafka.OVERRIDE_TIMESTAMP and kafka.PARTITION_KEY headers could likewise be injected to backdate messages or target specific partitions. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set or read Kafka headers via the raw header names must use the CamelKafka* names (for example CamelKafkaOverrideTopic and CamelKafkaTopic) instead of the old kafka.* values. For deployments that cannot upgrade immediately, strip the kafka.* headers from any untrusted ingress before the kafka: producer (for example removeHeaders('kafka.*') at the start of the route), and set the target topic from a trusted source.

🎖@cveNotify

🚨 CVE-2026-49099
Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Salesforce Component.

The camel-salesforce producer resolves its operation parameters - the SOQL query, the SOSL search, the target SObject name and id, the Apex REST URL and method, and the Apex query parameters - from Exchange message headers, reading the header in preference to the value configured on the endpoint (AbstractSalesforceProcessor.getParameter() reads the header first and uses the endpoint configuration only as a fallback). The control-header constants in SalesforceEndpointConfig (for example SOBJECT_QUERY = sObjectQuery, SOBJECT_SEARCH = sObjectSearch, SOBJECT_NAME = sObjectName, SOBJECT_ID = sObjectId, APEX_URL = apexUrl, APEX_METHOD = apexMethod, and the apexQueryParam. prefix) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a salesforce: producer, any HTTP client could therefore set these headers and override what the route intended - supplying its own SOQL query or SOSL search to read data from any SObject the connected Salesforce user can access, overriding the target SObject name and id for CRUD operations, or redirecting an Apex REST call to a different endpoint and HTTP method (including destructive methods) with injected query parameters. All such operations run with the full permissions of the Salesforce connected (integration) user, which is typically broad. No credentials are required from the attacker when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Salesforce operation parameters via the raw header names must use the CamelSalesforce* names (for example CamelSalesforceSObjectQuery and CamelSalesforceApexUrl) instead of the old sObject* / apex* values; the endpoint-option spelling is unchanged. For deployments that cannot upgrade immediately, strip the Salesforce control headers from any untrusted ingress before the salesforce: producer (for example removeHeaders('sObject*') and removeHeaders('apex*') at the start of the route), and set the query, SObject and Apex parameters from a trusted source.

🎖@cveNotify

🚨 CVE-2026-49365
Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Netty HTTP component.

The camel-netty-http HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false because the backing field was an uninitialised primitive boolean (Java's default of false), whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain (via DefaultNettyHttpBinding) instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application's internal structure, which an attacker can use to plan further attacks.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-netty-http consumer (for example netty-http: http://0.0.0.0:8080/api?muteException=true , or globally via the camel.component.netty-http.configuration.mute-exception=true property), so that processing errors no longer return the stack trace to the client.

🎖@cveNotify