🚨 CVE-2026-53159
In the Linux kernel, the following vulnerability has been resolved:

misc: fastrpc: fix DMA address corruption due to find_vma misuse

fastrpc_get_args() uses find_vma() to look up the VMA for a user-provided
pointer and compute a DMA address offset. When the address falls in a gap
before the returned VMA, (ptr & PAGE_MASK) - vma->vm_start underflows,
corrupting the DMA address sent to the DSP.

Replace find_vma() with vma_lookup(), which returns NULL when the address
is not contained within any VMA.

🎖@cveNotify

🚨 CVE-2026-53163
In the Linux kernel, the following vulnerability has been resolved:

locking/rtmutex: Skip remove_waiter() when waiter is not enqueued

syzbot triggered the following splat in remove_waiter() via
FUTEX_CMP_REQUEUE_PI:

KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f]
class_raw_spinlock_constructor
remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561
rt_mutex_start_proxy_lock+0x103/0x120
futex_requeue+0x10e4/0x20d0
__x64_sys_futex+0x34f/0x4d0

task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection,
leaving waiter->task nil, where 3bfdc63936dd ("rtmutex: Use waiter::task instead
of current in remove_waiter()") made this fatal.

Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter()
upon a successfully grabbing the rtmutex. 1a1fb985f2e2 ("futex: Handle early deadlock
return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock()
(where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check to
account for try_to_take_rt_mutex().

🎖@cveNotify

🚨 CVE-2026-53167
In the Linux kernel, the following vulnerability has been resolved:

fuse: limit FUSE_NOTIFY_RETRIEVE to uptodate folios

FUSE_NOTIFY_RETRIEVE must be limited to uptodate folios; !uptodate folios
can contain uninitialized data.
Since FUSE_NOTIFY_RETRIEVE is intended to only return data that is already
in the page cache and not wait for data from the FUSE daemon, treat
!uptodate folios as if they weren't present.

This only has security impact on systems that don't enable automatic
zero-initialization of all page allocations via
CONFIG_INIT_ON_ALLOC_DEFAULT_ON or init_on_alloc=1.

🎖@cveNotify

🚨 CVE-2026-53177
In the Linux kernel, the following vulnerability has been resolved:

bnxt_en: Fix NULL pointer dereference

PCIe errors detected by a Root Port or Downstream Port cause error
recovery services to run on all subordinate devices regardless of
administrative state.

The .error_detected() callback, bnxt_io_error_detected(), disables
and synchronizes IRQs via bnxt_disable_int_sync(), which calls
bnxt_cp_num_to_irq_num() to map completion rings to IRQs using
bp->bnapi.

Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe
error recovery on a closed NIC can dereference a NULL pointer.

Check if bp->bnapi is NULL before disabling and synchronizing IRQs.

🎖@cveNotify

🚨 CVE-2026-53179
In the Linux kernel, the following vulnerability has been resolved:

staging: rtl8723bs: fix buffer over-read in rtw_update_protection

rtw_update_protection() is called with a pointer offset into the
ies buffer but the full ie_length is passed, causing a potential
buffer over-read.

🎖@cveNotify

🚨 CVE-2026-53325
In the Linux kernel, the following vulnerability has been resolved:

agp/amd64: Fix broken error propagation in agp_amd64_probe()

A NULL pointer dereference was observed in the AMD64 AGP driver when
running in a virtualized environment (e.g. qemu/kvm) without a physical
AMD northbridge. The crash occurs in amd64_fetch_size() when attempting
to dereference the pointer returned by node_to_amd_nb(0).

The root cause of this crash is broken error propagation in
agp_amd64_probe(): When no AMD northbridges are found, cache_nbs()
correctly returns -ENODEV. However, the probe function erroneously
checks the return value against exactly -1, rather than < 0.

As a result, the hardware absence error is masked, allowing the driver
to improperly proceed with initialization. It eventually calls
agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware
does not exist, node_to_amd_nb(0) returns NULL, leading to a General
Protection Fault (GPF) when accessing its ->misc member.

Fix the issue by correcting the error check in agp_amd64_probe() to
abort properly when cache_nbs() returns any negative error code. This
prevents the driver from erroneously proceeding without hardware, thereby
avoiding the subsequent NULL pointer dereference at its source.

🎖@cveNotify

🚨 CVE-2026-53326
In the Linux kernel, the following vulnerability has been resolved:

debugobjects: Don't call fill_pool() in early boot hardirq context

When booting a debug PREEMPT_RT kernel on an ARM64 system, a "inconsistent
{HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage" lockdep warning message was
reported to the console.

During early boot, interrupts are enabled before the scheduler is
enabled. In this window (before SYSTEM_SCHEDULING is set) interrupts can
fire and in the hard interrupt context handler attempt to fill the pool

This can lead to a deadlock when the interrupt occurred when the interrupt
hits a region which holds a lock that is required to be taken in the
allocation path.

Add a new can_fill_pool() helper and reorder the exception rule and forbid
this scenario by excluding allocations from hard interrupt context.

🎖@cveNotify

🚨 CVE-2026-53329
In the Linux kernel, the following vulnerability has been resolved:

drm/amd/display: Use krealloc_array() in dal_vector_reserve()

[Why & How]
dal_vector_reserve() computes the allocation size as
"capacity * vector->struct_size" using uint32_t arithmetic, which can
silently wrap to a small value on overflow. This would cause krealloc to
return a smaller buffer than expected, leading to heap overflows on
subsequent vector appends.

Replace krealloc() with krealloc_array() which performs an internal
overflow check and returns NULL on wrap, preventing the issue.

(cherry picked from commit 37668568641ccc4cc1dbca4923d0a16609dd5707)

🎖@cveNotify

🚨 CVE-2026-53332
In the Linux kernel, the following vulnerability has been resolved:

slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd

When the remoteproc starts in parallel with the NGD driver being probed,
or the remoteproc is already up when the PDR lookup is being registered,
or in the theoretical event that we get an interrupt from the hardware,
these callbacks will operate on uninitialized data. This result in
issues to boot the affected boards.

One such example can be seen in the following fault, where
qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work.

[ 21.858578] ------------[ cut here ]------------
[ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116
...
[ 21.859251] Call trace:
[ 21.859255] __queue_work+0x5e0/0x790 (P)
[ 21.859265] queue_work_on+0x6c/0xf0
[ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl]
[ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl]
[ 21.859318] notifier_call_chain+0xa4/0x230
[ 21.859329] srcu_notifier_call_chain+0x64/0xb8
[ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common]
[ 21.859355] rproc_start+0x130/0x230
[ 21.859367] rproc_boot+0x3d4/0x518
...

Move the enablement of interrupts, and the registration of SSR and PDR
until after the NGD device has been registered.

This could be further refined by moving initialization to the control
driver probe and by removing the platform driver model from the picture.

🎖@cveNotify

🚨 CVE-2026-53341
In the Linux kernel, the following vulnerability has been resolved:

fhandle: fix UAF due to unlocked ->mnt_ns read in may_decode_fh()

may_decode_fh() accesses mount::mnt_ns without holding any locks; that
means the mount can concurrently be unmounted, and the mnt_namespace can
concurrently be freed after an RCU grace period.

This race can happens as follows, assuming that the mount point was
created by open_tree(..., OPEN_TREE_CLONE):

thread 1 thread 2 RCU
__do_sys_open_by_handle_at
do_handle_open
handle_to_path
may_decode_fh
is_mounted
[mount::mnt_ns access]
[mount::mnt_ns access]
__do_sys_close
fput_close_sync
__fput
dissolve_on_fput
umount_tree
class_namespace_excl_destructor
namespace_unlock
free_mnt_ns
mnt_ns_tree_remove
call_rcu(mnt_ns_release_rcu)
mnt_ns_release_rcu
mnt_ns_release
kfree
[mnt_namespace::user_ns access] **UAF**

Fix it by taking rcu_read_lock() around the mount::mnt_ns access, like
in __prepend_path().
Additionally, document the semantics of mount::mnt_ns, and use WRITE_ONCE()
for writers that can race with lockless readers.

This bug is unreachable unless one of the following is set:

- CONFIG_PREEMPTION
- CONFIG_RCU_STRICT_GRACE_PERIOD

because it requires an RCU grace period to happen during a syscall without
an explicit preemption.

This doesn't seem to have interesting security impact; worst-case, it could
leak the result of an integer comparison to userspace (from the level
check in cap_capable()), cause an endless loop, or crash the kernel by
dereferencing an invalid address.

🎖@cveNotify

🚨 CVE-2026-12195
myVesta is affected by an authenticated remote code execution vulnerability. Low privileged users can insert arbitrary commands as a part of the v_ftp_user parameter when deleting FTP usernames. This could result in the execution of commands as the admin user or takevoer of the admin user in myVesta.

🎖@cveNotify

🚨 CVE-2026-12196
HestiaCP panel cronjob feature is affected by a broken access control vulnerability. Low privilege users can modify the panel cronjob to execute scripts HestiaCP management scripts with passwordless sudo. This could result in the takeover of administrator users in the application and the underlying webserver.

🎖@cveNotify

🚨 CVE-2026-14625
A security flaw has been discovered in NousResearch hermes-agent up to 0.15.2. The affected element is the function shell.exec of the file tui_gateway/server.py. The manipulation results in protection mechanism failure. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2026-14626
A weakness has been identified in NousResearch hermes-agent up to 2026.4.30. The impacted element is the function AIAgent.run_conversation of the file run_agent.py of the component HTTP API. This manipulation of the argument todos causes denial of service. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2026-53359
In the Linux kernel, the following vulnerability has been resolved:

KVM: x86: Fix shadow paging use-after-free due to unexpected role

Commit 0cb2af2ea66ad ("KVM: x86: Fix shadow paging use-after-free due
to unexpected GFN") fixed a shadow paging mismatch between stored and
computed GFNs; the bug could be triggered by changing a PDE mapping from
outside the guest, and then deleting a memslot. The rmap_remove()
call would miss entries created after the PDE change because the GFN
of the leaf SPTE does not match the GFN of the struct kvm_mmu_page.

A similar hole however remains if the modified PDE points to a non-leaf
page. In this case the gfn can be made to match, but the role does not
match: the original large 2MB page creates a kvm_mmu_page with direct=1,
while the new 4KB needs a kvm_mmu_page with direct=0. However,
kvm_mmu_get_child_sp() does not compare the role, and therefore reuses
the page.

The next step is installing a leaf (4KB) SPTE on the new path which
records an rmap entry under the gfn resolved by the walk. But when
that child is zapped its parent kvm_mmu_page has direct=1 and
kvm_mmu_page_get_gfn() computes the gfn for the 4KB page as
sp->gfn + index instead of using sp->shadowed_translation[] (or sp->gfns[]
in older kernels). It therefore fails to remove the recorded entry.

When the memslot is dropped the shadow page is freed but the rmap
entry survives, as in the scenario that was already fixed. Code that
later walks that gfn (dirty logging, MMU notifier invalidation, and
so on) dereferences an sptep that lies in the freed page, causing the
use-after-free.

🎖@cveNotify

🚨 CVE-2026-53360
In the Linux kernel, the following vulnerability has been resolved:

KVM: SEV: Require in-GHCB scratch area if GHCB v2+ is in use

As per the GHCB spec, when using GHCB v2+ require the software scratch area
to reside in the GHCB's shared buffer. Note, things like Page State Change
(PSC) requests _rely_ on this behavior, as the guest can't provide a length
when making the request, i.e. the size of the guest payload is bounded by
the size of the shared buffer.

Failure to force usage of the GHCB, and a slew of other flaws, lets a
malicious SNP guest corrupt host kernel heap memory, and leak host heap
layout information.

setup_vmgexit_scratch() allocates a buffer via kvzalloc(exit_info_2),
where exit_info_2 is guest-controlled. With exit_info_2=24, this yields
a 24-byte allocation in kmalloc-cg-32 (32-byte slab objects). The buffer
holds an 8-byte psc_hdr followed by 8-byte psc_entry structs, so only
entries[0] and entries[1] are in-bounds.

snp_begin_psc() validates end_entry against VMGEXIT_PSC_MAX_COUNT (253)
but NOT against the actual buffer size:

idx_end = hdr->end_entry;

if (idx_end >= VMGEXIT_PSC_MAX_COUNT) { // checks 253, not buffer
snp_complete_psc(svm, ...);
return 1;
}

for (idx = idx_start; idx <= idx_end; idx++) {
entry_start = entries[idx]; // OOB when idx >= 2

The guest sets end_entry=10+, causing the host to iterate entries[2+]
which are OOB into adjacent slab objects. For each OOB entry:

- The host reads 8 bytes (OOB READ / info leak oracle)
- If the data passes PSC validation, __snp_complete_one_psc() writes
cur_page = 1 or 512 into the entry (OOB WRITE, sev.c:3806)
- If validation fails, the error response reveals whether adjacent
memory is zero vs non-zero (information disclosure to guest)

The guest controls allocation size (exit_info_2), entry range
(cur_entry/end_entry), and can fire unlimited VMGEXITs to repeatedly
hit different slab positions.

By exploiting the variety of bugs, a malicious SEV-SNP guest can:
- OOB read adjacent kmalloc-cg-32 objects (heap layout disclosure)
- OOB write cur_page bits into adjacent objects (heap corruption)
- Trigger use-after-free conditions across VMGEXITs

E.g. with KASAN enabled, a single insmod of the PoC guest module
produces 73 KASAN reports:

BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x126/0x890
Read of size 8 at addr ffff888219ffb5e0 by task qemu-system-x86/2199

BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x468/0x890
Write of size 8 at addr ffff888351566648 by task qemu-system-x86/2199

The buggy address belongs to the object at ffff888XXXXXXXXX
which belongs to the cache kmalloc-cg-32 of size 32
The buggy address is located N bytes to the right of
allocated 32-byte region [ffff888XXXXXXXXX, ffff888XXXXXXXXX)

Breakdown:
62 slab-out-of-bounds (reads + writes past allocation)
7 slab-use-after-free
4 use-after-free

All credit to Stan for the wonderful description and reproducer!

[sean: write changelog]

🎖@cveNotify

🚨 CVE-2026-53361
In the Linux kernel, the following vulnerability has been resolved:

af_unix: Set gc_in_progress to true in unix_gc().

Igor Ushakov reported that unix_gc() could run with gc_in_progress
being false if the work is scheduled while running:

Thread 1 Thread 2 Thread 3
-------- -------- --------
unix_schedule_gc() unix_schedule_gc()
`- if (!gc_in_progress) `- if (!gc_in_progress)
|- gc_in_progress = true |
`- queue_work() |
unix_gc() <----------------/ |
| |- gc_in_progress = true
... `- queue_work()
| |
`- gc_in_progress = false |
|
unix_gc() <---------------------------------------------'
|
... /* gc_in_progress == false */
|
`- gc_in_progress = false

unix_peek_fpl() relies on gc_in_progress not to confuse GC
by MSG_PEEK.

Let's set gc_in_progress to true in unix_gc().

🎖@cveNotify

🚨 CVE-2026-53362
In the Linux kernel, the following vulnerability has been resolved:

ipv6: account for fraggap on the paged allocation path

In __ip6_append_data(), when the paged-allocation branch is taken
(MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are
computed as

alloclen = fragheaderlen + transhdrlen;
pagedlen = datalen - transhdrlen;

datalen already includes fraggap (datalen = length + fraggap). When
fraggap is non-zero, this is not the first skb and transhdrlen is zero.
The fraggap bytes carried over from the previous skb are copied just past
the fragment headers in the new skb's linear area. The linear area is
therefore undersized by fraggap bytes while pagedlen is overstated by the
same amount, and the copy writes past skb->end into the trailing
skb_shared_info.

An unprivileged user can trigger this via a UDPv6 socket using
MSG_MORE together with MSG_SPLICE_PAGES.

The bad accounting was introduced by commit 773ba4fe9104 ("ipv6:
avoid partial copy for zc"). Before commit ce650a166335 ("udp6: Fix
__ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative
copy value caused -EINVAL to be returned. That later commit allowed
MSG_SPLICE_PAGES to proceed in this case, making the corruption
triggerable.

The non-paged branch sets alloclen to fraglen, which already accounts
for fraggap because datalen does. Bring the paged branch in line by
adding fraggap to alloclen and subtracting it from pagedlen.

After this adjustment, copy no longer collapses to -fraggap on the
paged path, so remove the stale comment describing that old arithmetic.
Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES
case, remove the MSG_SPLICE_PAGES exception from the negative copy check.

🎖@cveNotify

🚨 CVE-2025-13475
In multi-tenanted deployments, the application consent management mechanism fails to correctly isolate consent scopes between tenants. Consent granted by a user for a specific SaaS application within one tenant can be incorrectly applied to SaaS applications with the same name in other tenants, leading to unintended cross-tenant consent sharing.

This vulnerability may result in the exposure of user data across tenants, enabling SaaS applications in different tenants to access and modify information without explicit user authorization. This can lead to unauthorized data access and privacy violations. This vulnerability has no impact if the deployment does not support multi-tenancy.

🎖@cveNotify

🚨 CVE-2026-14627
A security vulnerability has been detected in NousResearch hermes-agent up to 0.15.2. This affects the function DiscordAdapter._is_allowed_user of the file gateway/platforms/discord.py of the component Discord Platform Integration. Such manipulation leads to improper authentication. The attack can be launched remotely. This attack is characterized by high complexity. The exploitability is reported as difficult. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2026-14628
A vulnerability was detected in NousResearch hermes-agent up to 2026.5.16. This impacts the function extract_media of the file gateway/platforms/base.py of the component Live Webhook Endpoint. Performing a manipulation results in path traversal. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify