🚨 CVE-2026-55950
Time-of-check Time-of-use (TOCTOU) race condition vulnerability in Erlang/OTP ssl (dtls_packet_demux module) allows an unauthenticated remote attacker to crash all active DTLS sessions on a listener.
A DTLS server listener uses a single shared dtls_packet_demux gen_server process to route incoming UDP datagrams to the correct connection handler. When a DTLS client reconnects rapidly from the same source address and port (sending multiple ClientHello messages in quick succession), a race condition in the demux's internal gb_trees key-value store causes a {key_exists, {old, Client}} crash, terminating the demux process. Because the demux is shared across all DTLS associations on that listener, its crash immediately kills every active DTLS session, not just the attacker's.
The attack is pre-authentication: the attacker only needs to send UDP datagrams containing valid ClientHello messages from the same source IP and port before the intermediate DOWN monitor message is processed by the gen_server. No credentials, no completed handshake, and no special configuration are required, and the crash can be repeated indefinitely to create a persistent denial of service for all clients of that listener.
This vulnerability is associated with program file lib/ssl/src/dtls_packet_demux.erl.
This issue affects OTP from OTP 25.3 before 29.0.3, 28.5.0.3, and 27.3.4.14 corresponding to ssl from 10.9 before 11.7.3, 11.6.0.3, and 11.2.12.10.
🎖@cveNotify
Time-of-check Time-of-use (TOCTOU) race condition vulnerability in Erlang/OTP ssl (dtls_packet_demux module) allows an unauthenticated remote attacker to crash all active DTLS sessions on a listener.
A DTLS server listener uses a single shared dtls_packet_demux gen_server process to route incoming UDP datagrams to the correct connection handler. When a DTLS client reconnects rapidly from the same source address and port (sending multiple ClientHello messages in quick succession), a race condition in the demux's internal gb_trees key-value store causes a {key_exists, {old, Client}} crash, terminating the demux process. Because the demux is shared across all DTLS associations on that listener, its crash immediately kills every active DTLS session, not just the attacker's.
The attack is pre-authentication: the attacker only needs to send UDP datagrams containing valid ClientHello messages from the same source IP and port before the intermediate DOWN monitor message is processed by the gen_server. No credentials, no completed handshake, and no special configuration are required, and the crash can be repeated indefinitely to create a persistent denial of service for all clients of that listener.
This vulnerability is associated with program file lib/ssl/src/dtls_packet_demux.erl.
This issue affects OTP from OTP 25.3 before 29.0.3, 28.5.0.3, and 27.3.4.14 corresponding to ssl from 10.9 before 11.7.3, 11.6.0.3, and 11.2.12.10.
🎖@cveNotify
Erlang Ecosystem Foundation CNA
DTLS listener crash via race condition in dtls_packet_demux causes denial of service for all sessions
This project handles the CVE Numbering Authority (CNA) for the Erlang Ecosystem Foundation (EEF).
🚨 CVE-2026-55952
The Erlang/OTP ssl application does not validate that the PSK identity list and binder list carried in a TLS 1.3 ClientHello pre-shared key extension have equal length before passing them to the session ticket handler. In tls_handshake_1_3:handle_pre_shared_key/3, an OfferedPreSharedKeys record with a mismatched number of identities and binders is forwarded directly to tls_server_session_ticket:use/4, which crashes the session ticket handler process.
An unauthenticated remote attacker can send a single crafted ClientHello to a TLS 1.3 server with session tickets enabled (stateful or stateless mode) and permanently disrupt session ticket handling on that listener. New TLS 1.3 handshakes complete but subsequently crash when the server attempts to issue a session ticket, effectively making TLS 1.3 unusable on the affected listener until the ssl application is restarted. TLS 1.2 connections are not affected.
This issue affects OTP from 22.2 before 29.0.3, 28.5.0.3 and 27.3.4.14 corresponding to ssl from 9.5 before 11.7.3, 11.6.0.3 and 11.2.12.10.
🎖@cveNotify
The Erlang/OTP ssl application does not validate that the PSK identity list and binder list carried in a TLS 1.3 ClientHello pre-shared key extension have equal length before passing them to the session ticket handler. In tls_handshake_1_3:handle_pre_shared_key/3, an OfferedPreSharedKeys record with a mismatched number of identities and binders is forwarded directly to tls_server_session_ticket:use/4, which crashes the session ticket handler process.
An unauthenticated remote attacker can send a single crafted ClientHello to a TLS 1.3 server with session tickets enabled (stateful or stateless mode) and permanently disrupt session ticket handling on that listener. New TLS 1.3 handshakes complete but subsequently crash when the server attempts to issue a session ticket, effectively making TLS 1.3 unusable on the affected listener until the ssl application is restarted. TLS 1.2 connections are not affected.
This issue affects OTP from 22.2 before 29.0.3, 28.5.0.3 and 27.3.4.14 corresponding to ssl from 9.5 before 11.7.3, 11.6.0.3 and 11.2.12.10.
🎖@cveNotify
Erlang Ecosystem Foundation CNA
TLS 1.3 server denial of service via malformed ClientHello pre-shared key extension
This project handles the CVE Numbering Authority (CNA) for the Erlang Ecosystem Foundation (EEF).
🚨 CVE-2026-8699
A stored Cross-Site Scripting (XSS) vulnerability has been identified in the web-based management interface of Archer C5 v6.8 routers, due to insufficient server-side validation and lack of proper output encoding of user-controlled input in a certain field. An attacker with administrative privileges can inject crafted HTML or JS payloads into the affected field. The payload is stored and later executed when the affected page is rendered in an administrator's browser.Successful exploitation allows execution of arbitrary JavaScript in an admin's browser, potentially leading to session hijacking and unauthorized access to router configuration, possibly resulting in exposure of sensitive data and modification of device settings.
The vulnerability affects ISP-managed firmware variants of the product. Remediation is coordinated through service providers.
🎖@cveNotify
A stored Cross-Site Scripting (XSS) vulnerability has been identified in the web-based management interface of Archer C5 v6.8 routers, due to insufficient server-side validation and lack of proper output encoding of user-controlled input in a certain field. An attacker with administrative privileges can inject crafted HTML or JS payloads into the affected field. The payload is stored and later executed when the affected page is rendered in an administrator's browser.Successful exploitation allows execution of arbitrary JavaScript in an admin's browser, potentially leading to session hijacking and unauthorized access to router configuration, possibly resulting in exposure of sensitive data and modification of device settings.
The vulnerability affects ISP-managed firmware variants of the product. Remediation is coordinated through service providers.
🎖@cveNotify
🚨 CVE-2026-20155
A vulnerability in the web-based management interface of Cisco Evolved Programmable Network Manager (EPNM) could allow an authenticated, remote attacker with low privileges to access sensitive information that they are not authorized to access.
This vulnerability is due to improper authorization checks on a REST API endpoint of an affected device. An attacker could exploit this vulnerability by querying the affected endpoint. A successful exploit could allow the attacker to view session information of active Cisco EPNM users, including users with administrative privileges, which could result in the affected device being compromised.
🎖@cveNotify
A vulnerability in the web-based management interface of Cisco Evolved Programmable Network Manager (EPNM) could allow an authenticated, remote attacker with low privileges to access sensitive information that they are not authorized to access.
This vulnerability is due to improper authorization checks on a REST API endpoint of an affected device. An attacker could exploit this vulnerability by querying the affected endpoint. A successful exploit could allow the attacker to view session information of active Cisco EPNM users, including users with administrative privileges, which could result in the affected device being compromised.
🎖@cveNotify
Cisco
Cisco Security Advisory: Cisco Evolved Programmable Network Manager Improper Authorization Vulnerability
A vulnerability in the web-based management interface of Cisco Evolved Programmable Network Manager (EPNM) could allow an authenticated, remote attacker with low privileges to access sensitive information that they are not authorized to access.
This vulnerability…
This vulnerability…
🚨 CVE-2026-20132
Multiple vulnerabilities in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker with administrative write privileges to conduct a stored cross-site scripting (XSS) attack or a reflected XSS attack against a user of the web-based management interface of an affected device.
These vulnerabilities are due to insufficient sanitization of user-supplied data that is stored in the web page. An attacker could exploit these vulnerabilities by convincing a user of the interface to click a specific link or view an affected web page. The injected script code may be executed in the context of the web-based management interface or allow the attacker to access sensitive browser-based information.
🎖@cveNotify
Multiple vulnerabilities in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker with administrative write privileges to conduct a stored cross-site scripting (XSS) attack or a reflected XSS attack against a user of the web-based management interface of an affected device.
These vulnerabilities are due to insufficient sanitization of user-supplied data that is stored in the web page. An attacker could exploit these vulnerabilities by convincing a user of the interface to click a specific link or view an affected web page. The injected script code may be executed in the context of the web-based management interface or allow the attacker to access sensitive browser-based information.
🎖@cveNotify
Cisco
Cisco Security Advisory: Cisco Identity Services Engine Multiple Cross-Site Scripting Vulnerabilities
Multiple vulnerabilities in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker with administrative write privileges to conduct a stored cross-site scripting (XSS) attack or a reflected…
🚨 CVE-2026-20136
A vulnerability in the CLI of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, local attacker with administrative privileges to perform a command injection attack on the underlying operating system and elevate privileges to root.
This vulnerability is due to insufficient validation of user supplied input. An attacker could exploit this vulnerability by providing crafted input to a specific CLI command. A successful exploit could allow the attacker to elevate their privileges to root on the underlying operating system.
🎖@cveNotify
A vulnerability in the CLI of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, local attacker with administrative privileges to perform a command injection attack on the underlying operating system and elevate privileges to root.
This vulnerability is due to insufficient validation of user supplied input. An attacker could exploit this vulnerability by providing crafted input to a specific CLI command. A successful exploit could allow the attacker to elevate their privileges to root on the underlying operating system.
🎖@cveNotify
Cisco
Cisco Security Advisory: Cisco Identity Services Engine Authenticated Privilege Escalation Vulnerability
A vulnerability in the CLI of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, local attacker with administrative privileges to perform a command injection attack on the underlying operating…
🚨 CVE-2026-49432
Improper Input Validation vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Stomp.
A remote unauthenticated peer that can reach an exposed STOMP connector can trigger denial-of-service behavior by sending a negative content-length. For the NIO STOMP transport, an attacker can keep streaming body bytes and grow the per-connection command buffer beyond configured limits to cause OOM. For the blocking STOMP protocol, an error will instead force abnormal transport exception handling for the affected connection and closure.
This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Stomp: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.
🎖@cveNotify
Improper Input Validation vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Stomp.
A remote unauthenticated peer that can reach an exposed STOMP connector can trigger denial-of-service behavior by sending a negative content-length. For the NIO STOMP transport, an attacker can keep streaming body bytes and grow the per-connection command buffer beyond configured limits to cause OOM. For the blocking STOMP protocol, an error will instead force abnormal transport exception handling for the affected connection and closure.
This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Stomp: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-49434
Improper Input Validation vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ, Apache ActiveMQ All.
An attacker that has access to publish or modify entries in LDAP that match the configured searchBase and searchFilter can instantiate denied transports inside the broker JVM. This can be used to fetch an attacker URL and spawn a second BrokerService inside the same JVM.
This issue affects Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.
🎖@cveNotify
Improper Input Validation vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ, Apache ActiveMQ All.
An attacker that has access to publish or modify entries in LDAP that match the configured searchBase and searchFilter can instantiate denied transports inside the broker JVM. This can be used to fetch an attacker URL and spawn a second BrokerService inside the same JVM.
This issue affects Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-49877
Improper Authorization vulnerability in Apache ActiveMQ.
An authenticated low-privilege Web Console user by default can access /admin/* paths in the Web Console. The default Jetty settings incorrectly did not limit those paths to only admins.
This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.
🎖@cveNotify
Improper Authorization vulnerability in Apache ActiveMQ.
An authenticated low-privilege Web Console user by default can access /admin/* paths in the Web Console. The default Jetty settings incorrectly did not limit those paths to only admins.
This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-50734
Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ Client, Apache ActiveMQ, Apache ActiveMQ All.
An unauthenticated network attacker can cause a broker DoS by sending a crafted WireFormatInfo frame with a malicious large size value. The value is not validate and causes the broker to attempt allocation during pre-auth negotiation which can trigger OOM and crash the broker.
This issue affects Apache ActiveMQ Client: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.
🎖@cveNotify
Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ Client, Apache ActiveMQ, Apache ActiveMQ All.
An unauthenticated network attacker can cause a broker DoS by sending a crafted WireFormatInfo frame with a malicious large size value. The value is not validate and causes the broker to attempt allocation during pre-auth negotiation which can trigger OOM and crash the broker.
This issue affects Apache ActiveMQ Client: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-50750
Denial of Service via Out of Memory vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ, Apache ActiveMQ All.
Following the fix for CVE-2026-49270 an unauthenticated attacker can now cause broker OOM by sending an repeated BrokerInfo commands without sending a ConnectionInfo, until the broker will crash with OOM.
This issue affects Apache ActiveMQ Broker: from 5.19.7 before 5.19.8, from 6.2.6 before 6.2.7; Apache ActiveMQ: from 5.19.7 before 5.19.8, from 6.2.6 before 6.2.7; Apache ActiveMQ All: from 5.19.7 before 5.19.8, from 6.2.6 before 6.2.7.
Users are recommended to upgrade to version 6.2.7, which fixes the issue.
🎖@cveNotify
Denial of Service via Out of Memory vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ, Apache ActiveMQ All.
Following the fix for CVE-2026-49270 an unauthenticated attacker can now cause broker OOM by sending an repeated BrokerInfo commands without sending a ConnectionInfo, until the broker will crash with OOM.
This issue affects Apache ActiveMQ Broker: from 5.19.7 before 5.19.8, from 6.2.6 before 6.2.7; Apache ActiveMQ: from 5.19.7 before 5.19.8, from 6.2.6 before 6.2.7; Apache ActiveMQ All: from 5.19.7 before 5.19.8, from 6.2.6 before 6.2.7.
Users are recommended to upgrade to version 6.2.7, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-52760
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Apache ActiveMQ, Apache ActiveMQ Web Console.
The browse page in the web console renders a message Id directly without sanitization. This allows an authenticated producer to send a message with a JMS message ID that has been crafted to contain HTML/JavaScript such that when an administrator browses the queue in the Web Console, the payload executes in their browser.
This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Web Console: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.
🎖@cveNotify
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Apache ActiveMQ, Apache ActiveMQ Web Console.
The browse page in the web console renders a message Id directly without sanitization. This allows an authenticated producer to send a message with a JMS message ID that has been crafted to contain HTML/JavaScript such that when an administrator browses the queue in the Web Console, the payload executes in their browser.
This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Web Console: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-53916
Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Stomp.
An unauthenticated client that opens a STOMP NIO connection can send header bytes that never terminate which makes the broker buffer them without limit, exhausting the JVM heap.
This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Stomp: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.
🎖@cveNotify
Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Stomp.
An unauthenticated client that opens a STOMP NIO connection can send header bytes that never terminate which makes the broker buffer them without limit, exhausting the JVM heap.
This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Stomp: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-53917
Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Client, Apache ActiveMQ Broker.
An authenticated user can cause a broker DoS by sending a crafted OpenWire Message with a large encoded size value for the map. OpenWire message property maps are unmarshaled without size validation which can trigger OOM and crash the broker.
This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Client: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.
🎖@cveNotify
Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Client, Apache ActiveMQ Broker.
An authenticated user can cause a broker DoS by sending a crafted OpenWire Message with a large encoded size value for the map. OpenWire message property maps are unmarshaled without size validation which can trigger OOM and crash the broker.
This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Client: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-54475
Missing Authorization vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ All, Apache ActiveMQ.
Apache ActiveMQ Classic temporary destinations are expected to be isolated to the connection that created them. The isolation can be broken as this is only checked in the client, allowing a different connection to consume from another connection's temporary
destination.
This issue affects Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7, which fixes the issue.
🎖@cveNotify
Missing Authorization vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ All, Apache ActiveMQ.
Apache ActiveMQ Classic temporary destinations are expected to be isolated to the connection that created them. The isolation can be broken as this is only checked in the client, allowing a different connection to consume from another connection's temporary
destination.
This issue affects Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-58166
OpenBMB ChatDev through 2.2.0, fixed in commit 4fd4da6, contains a path traversal vulnerability that allows unauthenticated remote attackers to write or delete arbitrary files by supplying a malicious multipart filename in the file upload endpoint. Attackers can send a crafted filename containing path traversal sequences or an absolute path to the POST uploads session endpoint, which constructs the destination path without sanitization in save_upload_file, causing file write and cleanup operations to target attacker-chosen paths on the server filesystem.
🎖@cveNotify
OpenBMB ChatDev through 2.2.0, fixed in commit 4fd4da6, contains a path traversal vulnerability that allows unauthenticated remote attackers to write or delete arbitrary files by supplying a malicious multipart filename in the file upload endpoint. Attackers can send a crafted filename containing path traversal sequences or an absolute path to the POST uploads session endpoint, which constructs the destination path without sanitization in save_upload_file, causing file write and cleanup operations to target attacker-chosen paths on the server filesystem.
🎖@cveNotify
GitHub
Merge pull request #641 from swaylq/fix/638-upload-filename-path-trav… · OpenBMB/ChatDev@4fd4da6
…ersal
fix: sanitize upload filename to prevent path traversal (#638)
fix: sanitize upload filename to prevent path traversal (#638)
🚨 CVE-2026-58176
RuoYi-Vue-Plus through 5.6.2, fixed in commit 88d03d9, exposes workflow task management endpoints under /workflow/task (FlwTaskController) without any permission check: the controller declares no class-level or method-level authorization annotation, so the endpoints are gated only by global authentication. Any authenticated user, regardless of assigned role, can therefore reassign workflow approval tasks to arbitrary users via updateAssignee (defeating segregation of duties in the approval process), urge arbitrary tasks, and enumerate all pending and finished tasks via the pageByAllTaskWait and pageByAllTaskFinish listing endpoints. The issue was resolved by adding permission identifiers (SaCheckPermission) to these endpoints.
🎖@cveNotify
RuoYi-Vue-Plus through 5.6.2, fixed in commit 88d03d9, exposes workflow task management endpoints under /workflow/task (FlwTaskController) without any permission check: the controller declares no class-level or method-level authorization annotation, so the endpoints are gated only by global authentication. Any authenticated user, regardless of assigned role, can therefore reassign workflow approval tasks to arbitrary users via updateAssignee (defeating segregation of duties in the approval process), urge arbitrary tasks, and enumerate all pending and finished tasks via the pageByAllTaskWait and pageByAllTaskFinish listing endpoints. The issue was resolved by adding permission identifiers (SaCheckPermission) to these endpoints.
🎖@cveNotify
GitHub
update 优化 工作流管理页接口增加权限标识符 避免越权 · dromara/RuoYi-Vue-Plus@88d03d9
多租户后台管理系统 重写RuoYi-Vue所有功能 集成 Sa-Token、Mybatis-Plus、WarmFlow、SpringDoc、Hutool、OSS 定期同步 - update 优化 工作流管理页接口增加权限标识符 避免越权 · dromara/RuoYi-Vue-Plus@88d03d9
🚨 CVE-2026-58375
JimuReport through 2.5.0 exposes the POST /jmreport/auto/export endpoint without authentication: the handler is annotated @JimuNoLoginRequired, so JimuReportTokenInterceptor skips all authentication and authorization, and the export service streams the rendered report for any supplied report id without verifying the auto-export configuration flag. An unauthenticated remote attacker can enumerate Snowflake report identifiers and export the full contents of any report, including the data returned by the report configured SQL queries and any credentials embedded in its data sources.
🎖@cveNotify
JimuReport through 2.5.0 exposes the POST /jmreport/auto/export endpoint without authentication: the handler is annotated @JimuNoLoginRequired, so JimuReportTokenInterceptor skips all authentication and authorization, and the export service streams the rendered report for any supplied report id without verifying the auto-export configuration flag. An unauthenticated remote attacker can enumerate Snowflake report identifiers and export the full contents of any report, including the data returned by the report configured SQL queries and any credentials embedded in its data sources.
🎖@cveNotify
GitHub
Unauthenticated report export via /jmreport/auto/export -- JimuReport 2.3.4 · Issue #4694 · jeecgboot/jimureport
(reported via email on 3 June) I am reporting an unauthenticated access vulnerability in JimuReport (jeecgboot/JimuReport, commit fdd1ad4, version 2.3.4) that allows any network-accessible caller t...
🚨 CVE-2026-11906
IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 for Linux, UNIX and Windows (includes Db2 Connect Server) could allow an authenticated user to cause a denial of service due to improper neutralization of special elements in the data query logic of XMLTable-derived columns.
🎖@cveNotify
IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 for Linux, UNIX and Windows (includes Db2 Connect Server) could allow an authenticated user to cause a denial of service due to improper neutralization of special elements in the data query logic of XMLTable-derived columns.
🎖@cveNotify
Ibm
Security Bulletin: IBM® Db2® federated server is vulnerable to a denial of service due to improper neutralization of special elements…
IBM® Db2® federated server is vulnerable to cause a denial of service due to improper neutralization of special elements in the data query logic of XMLTable-derived columns by a authenticated user.
🚨 CVE-2026-12084
IBM UCD - IBM DevOps Deploy 8.1 through 8.1.2.6, and 8.2 through 8.2.1.0 uses Cross-Origin Resource Sharing (CORS) which could allow an attacker to carry out privileged actions and retrieve sensitive information as the domain name is not being limited to only trusted domains.
🎖@cveNotify
IBM UCD - IBM DevOps Deploy 8.1 through 8.1.2.6, and 8.2 through 8.2.1.0 uses Cross-Origin Resource Sharing (CORS) which could allow an attacker to carry out privileged actions and retrieve sensitive information as the domain name is not being limited to only trusted domains.
🎖@cveNotify
Ibm
Security Bulletin: IBM DevOps Deploy / IBM UrbanCode Deploy (UCD) is susceptible to a Permissive Cross-domain Security Policy with…
IBM DevOps Deploy / IBM UrbanCode Deploy (UCD) uses Cross-Origin Resource Sharing (CORS) which could allow an attacker to carry out privileged actions and retrieve sensitive information as the domain name is not being limited to only trusted domains. CVE…
🚨 CVE-2026-12085
IBM UCD - IBM UrbanCode Deploy 7.3 through 7.3.2.18 and IBM UCD - IBM DevOps Deploy 8.0 through 8.0.1.13, 8.1 through 8.1.2.6, and 8.2 through 8.2.1.0 IBM DevOps Deploy could disclose sensitive configurations and secrets to authenticated users in API responses that could be used in further attacks against the system.
🎖@cveNotify
IBM UCD - IBM UrbanCode Deploy 7.3 through 7.3.2.18 and IBM UCD - IBM DevOps Deploy 8.0 through 8.0.1.13, 8.1 through 8.1.2.6, and 8.2 through 8.2.1.0 IBM DevOps Deploy could disclose sensitive configurations and secrets to authenticated users in API responses that could be used in further attacks against the system.
🎖@cveNotify
Ibm
Security Bulletin: IBM DevOps Deploy / IBM UrbanCode Deploy (UCD) is susceptable to an Insertion of Sensitive Information Into…
IBM DevOps Deploy / IBM UrbanCode Deploy (UCD) could disclose sensitive configurations and secrets to authenticated users in API responses that could be used in further attacks against the system. CVE-2026-12085.