🚨 CVE-2026-13131
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### connectInfo command index-out-of-bound
🎖@cveNotify
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### connectInfo command index-out-of-bound
🎖@cveNotify
🚨 CVE-2026-13132
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### setStream command index-out-of-bound
🎖@cveNotify
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### setStream command index-out-of-bound
🎖@cveNotify
🚨 CVE-2026-57264
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### setPIP command index-out-of-bound
🎖@cveNotify
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### setPIP command index-out-of-bound
🎖@cveNotify
🚨 CVE-2026-57265
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### audio command index-out-of-bound
🎖@cveNotify
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### audio command index-out-of-bound
🎖@cveNotify
🚨 CVE-2026-57266
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### 2wayAudio command index-out-of-bound
🎖@cveNotify
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### 2wayAudio command index-out-of-bound
🎖@cveNotify
🚨 CVE-2026-57267
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### snapshot command index-out-of-bound
🎖@cveNotify
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### snapshot command index-out-of-bound
🎖@cveNotify
🚨 CVE-2026-57268
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
### saveVideo command index-out-of-bound
When sending the `saveVideo` command, the `index` field is extracted from the websocket message [1]. Then without checking the range of the index, it is used to trigger a CriticalSection ([2]) and releases it [3]. The release function call ([3]) is executed using a function pointer which will be read out of bounds potentially leading to code execution:
v6 = get_entry(a2, "index");
result = json_is_value_int(v6);
if ( (_BYTE)result )
{
v8 = get_entry(a2, "index");
index = json_value_to_int(&v8->value); // [1]
result = CCriticalSection::EnterCritSection(&this->crit_sections[index]); //[2]
if ( result )
{
if ( this->array_of_IPCams[index] )
{
if ( this->array_of_IPCams[index]->field_20 )
do_PostMessageA((CViewer *)this->array_of_IPCams[index], 0x111u, 0x139Fu, v11);
}
return (*(int (__thiscall **)(CCriticalSection *))(this->crit_sections[index].vtbl + 20))(&this->crit_sections[index]); //[3]
}
}
🎖@cveNotify
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
### saveVideo command index-out-of-bound
When sending the `saveVideo` command, the `index` field is extracted from the websocket message [1]. Then without checking the range of the index, it is used to trigger a CriticalSection ([2]) and releases it [3]. The release function call ([3]) is executed using a function pointer which will be read out of bounds potentially leading to code execution:
v6 = get_entry(a2, "index");
result = json_is_value_int(v6);
if ( (_BYTE)result )
{
v8 = get_entry(a2, "index");
index = json_value_to_int(&v8->value); // [1]
result = CCriticalSection::EnterCritSection(&this->crit_sections[index]); //[2]
if ( result )
{
if ( this->array_of_IPCams[index] )
{
if ( this->array_of_IPCams[index]->field_20 )
do_PostMessageA((CViewer *)this->array_of_IPCams[index], 0x111u, 0x139Fu, v11);
}
return (*(int (__thiscall **)(CCriticalSection *))(this->crit_sections[index].vtbl + 20))(&this->crit_sections[index]); //[3]
}
}
🎖@cveNotify
🚨 CVE-2026-57269
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### disconnect command index-out-of-bound
🎖@cveNotify
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### disconnect command index-out-of-bound
🎖@cveNotify
🚨 CVE-2026-57270
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### play command index-out-of-bound
🎖@cveNotify
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### play command index-out-of-bound
🎖@cveNotify
🚨 CVE-2026-57271
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
#### pause command index-out-of-bound
🎖@cveNotify
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
#### pause command index-out-of-bound
🎖@cveNotify
🚨 CVE-2026-57272
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### byPass command index-out-of-bound
🎖@cveNotify
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### byPass command index-out-of-bound
🎖@cveNotify
🚨 CVE-2026-57273
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits.
#### Buffer Overflow in username field (no key present)
🎖@cveNotify
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits.
#### Buffer Overflow in username field (no key present)
🎖@cveNotify
🚨 CVE-2026-57274
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits.
#### Buffer Overflow in password field (no key present)
🎖@cveNotify
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits.
#### Buffer Overflow in password field (no key present)
🎖@cveNotify
🚨 CVE-2026-57275
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits.
#### Buffer Overflow in username field (key present)
🎖@cveNotify
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits.
#### Buffer Overflow in username field (key present)
🎖@cveNotify
🚨 CVE-2026-57276
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits.
#### Buffer Overflow in password field (key present)
🎖@cveNotify
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits.
#### Buffer Overflow in password field (key present)
🎖@cveNotify
🚨 CVE-2026-57277
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits.
#### Buffer Overflow in key field
🎖@cveNotify
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits.
#### Buffer Overflow in key field
🎖@cveNotify
🚨 CVE-2026-57278
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits.
#### Buffer Overflow in ip field
🎖@cveNotify
GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits.
#### Buffer Overflow in ip field
🎖@cveNotify
🚨 CVE-2026-45659
Deserialization of untrusted data in Microsoft Office SharePoint allows an authorized attacker to execute code over a network.
🎖@cveNotify
Deserialization of untrusted data in Microsoft Office SharePoint allows an authorized attacker to execute code over a network.
🎖@cveNotify
🚨 CVE-2026-57948
Pinpoint through version 3.1.0 contains an insecure session management vulnerability that allows attackers to access the pinpointJwt session cookie due to missing HttpOnly and Secure attributes, enabling JavaScript access via document.cookie and cleartext transmission over HTTP. Attackers can exploit stored or reflected cross-site scripting vulnerabilities to exfiltrate the session token or intercept it through network sniffing to perform session hijacking.
🎖@cveNotify
Pinpoint through version 3.1.0 contains an insecure session management vulnerability that allows attackers to access the pinpointJwt session cookie due to missing HttpOnly and Secure attributes, enabling JavaScript access via document.cookie and cleartext transmission over HTTP. Attackers can exploit stored or reflected cross-site scripting vulnerabilities to exfiltrate the session token or intercept it through network sniffing to perform session hijacking.
🎖@cveNotify
GitHub
JWT session cookie missing HttpOnly and Secure attributes exposes session tokens to script access and plaintext transmission ·…
Summary When basicLogin mode is enabled, Pinpoint issues the JWT session token as a cookie named pinpointJwt. The cookie is created without the HttpOnly or Secure attributes. The absence of HttpOnl...
🚨 CVE-2026-58172
Ocelot through 24.1.0, fixed in commit f156fd4, contains a security control bypass vulnerability that allows denied clients to circumvent IP-based access restrictions by sending WebSocket upgrade requests. The WebSocket upgrade pipeline branch configured via MapWhen in OcelotPipelineExtensions.cs omits SecurityMiddleware, causing requests from blocked IP addresses to be proxied to downstream services without enforcement of the configured allow/block list.
🎖@cveNotify
Ocelot through 24.1.0, fixed in commit f156fd4, contains a security control bypass vulnerability that allows denied clients to circumvent IP-based access restrictions by sending WebSocket upgrade requests. The WebSocket upgrade pipeline branch configured via MapWhen in OcelotPipelineExtensions.cs omits SecurityMiddleware, causing requests from blocked IP addresses to be proxied to downstream services without enforcement of the configured allow/block list.
🎖@cveNotify
GitHub
#2403 Add `SecurityOptions` support to the WebSocket pipeline (#2406) · ThreeMammals/Ocelot@f156fd4
* fix #2403: enforce IP security on WebSocket upgrades
* Code review by @raman-m
* manually set 403 Forbidden on denied WebSocket upgrade
* fix missed CollectHttpResponseDetails in WS tests; assert...
* Code review by @raman-m
* manually set 403 Forbidden on denied WebSocket upgrade
* fix missed CollectHttpResponseDetails in WS tests; assert...
🚨 CVE-2026-58370
Woodpecker before 3.15.0 matches the ApprovalAllowedUsers bypass list against pipeline.Author. For the GitLab forge driver, pipeline.Author is populated from the git commit author name (commit.author.name) carried in the webhook payload, which is attacker-controlled and not verified by GitLab. A user who can open a merge request from a fork can set the commit author name to match an entry in ApprovalAllowedUsers, causing needsApproval to return false so the pipeline runs without the required approval. This defeats the fork-approval security boundary and allows execution of attacker-controlled pipeline steps on a Woodpecker agent and exfiltration of CI secrets exposed to the run. Other built-in forge drivers (Gitea, Forgejo, GitHub, Bitbucket) derive pipeline.Author from the forge-validated sender/actor identity and are not affected.
🎖@cveNotify
Woodpecker before 3.15.0 matches the ApprovalAllowedUsers bypass list against pipeline.Author. For the GitLab forge driver, pipeline.Author is populated from the git commit author name (commit.author.name) carried in the webhook payload, which is attacker-controlled and not verified by GitLab. A user who can open a merge request from a fork can set the commit author name to match an entry in ApprovalAllowedUsers, causing needsApproval to return false so the pipeline runs without the required approval. This defeats the fork-approval security boundary and allows execution of attacker-controlled pipeline steps on a Woodpecker agent and exfiltration of CI secrets exposed to the run. Other built-in forge drivers (Gitea, Forgejo, GitHub, Bitbucket) derive pipeline.Author from the forge-validated sender/actor identity and are not affected.
🎖@cveNotify
GitHub
Use Gitlab username (#6653) · woodpecker-ci/woodpecker@98faae7
Woodpecker is a simple, yet powerful CI/CD engine with great extensibility. - Use Gitlab username (#6653) · woodpecker-ci/woodpecker@98faae7