🚨 CVE-2025-5222
A stack buffer overflow was found in Internationl components for unicode (ICU ). While running the genrb binary, the 'subtag' struct overflowed at the SRBRoot::addTag function. This issue may lead to memory corruption and local arbitrary code execution.
🎖@cveNotify
A stack buffer overflow was found in Internationl components for unicode (ICU ). While running the genrb binary, the 'subtag' struct overflowed at the SRBRoot::addTag function. This issue may lead to memory corruption and local arbitrary code execution.
🎖@cveNotify
🚨 CVE-2025-47711
There's a flaw in the nbdkit server when handling responses from its plugins regarding the status of data blocks. If a client makes a specific request for a very large data range, and a plugin responds with an even larger single block, the nbdkit server can encounter a critical internal error, leading to a denial-of-service.
🎖@cveNotify
There's a flaw in the nbdkit server when handling responses from its plugins regarding the status of data blocks. If a client makes a specific request for a very large data range, and a plugin responds with an even larger single block, the nbdkit server can encounter a critical internal error, leading to a denial-of-service.
🎖@cveNotify
🚨 CVE-2025-47712
A flaw exists in the nbdkit "blocksize" filter that can be triggered by a specific type of client request. When a client requests block status information for a very large data range, exceeding a certain limit, it causes an internal error in the nbdkit, leading to a denial of service.
🎖@cveNotify
A flaw exists in the nbdkit "blocksize" filter that can be triggered by a specific type of client request. When a client requests block status information for a very large data range, exceeding a certain limit, it causes an internal error in the nbdkit, leading to a denial of service.
🎖@cveNotify
🚨 CVE-2025-59089
If an attacker causes kdcproxy to connect to an attacker-controlled KDC server (e.g. through server-side request forgery), they can exploit the fact that kdcproxy does not enforce bounds on TCP response length to conduct a denial-of-service attack. While receiving the KDC's response, kdcproxy copies the entire buffered stream into a new
buffer on each recv() call, even when the transfer is incomplete, causing excessive memory allocation and CPU usage. Additionally, kdcproxy accepts incoming response chunks as long as the received data length is not exactly equal to the length indicated in the response
header, even when individual chunks or the total buffer exceed the maximum length of a Kerberos message. This allows an attacker to send unbounded data until the connection timeout is reached (approximately 12 seconds), exhausting server memory or CPU resources. Multiple concurrent requests can cause accept queue overflow, denying service to legitimate clients.
🎖@cveNotify
If an attacker causes kdcproxy to connect to an attacker-controlled KDC server (e.g. through server-side request forgery), they can exploit the fact that kdcproxy does not enforce bounds on TCP response length to conduct a denial-of-service attack. While receiving the KDC's response, kdcproxy copies the entire buffered stream into a new
buffer on each recv() call, even when the transfer is incomplete, causing excessive memory allocation and CPU usage. Additionally, kdcproxy accepts incoming response chunks as long as the received data length is not exactly equal to the length indicated in the response
header, even when individual chunks or the total buffer exceed the maximum length of a Kerberos message. This allows an attacker to send unbounded data until the connection timeout is reached (approximately 12 seconds), exhausting server memory or CPU resources. Multiple concurrent requests can cause accept queue overflow, denying service to legitimate clients.
🎖@cveNotify
🚨 CVE-2025-54770
A vulnerability has been identified in the GRUB2 bootloader's network module that poses an immediate Denial of Service (DoS) risk. This flaw is a Use-after-Free issue, caused because the net_set_vlan command is not properly unregistered when the network module is unloaded from memory. An attacker who can execute this command can force the system to access memory locations that are no longer valid. Successful exploitation leads directly to system instability, which can result in a complete crash and halt system availability
🎖@cveNotify
A vulnerability has been identified in the GRUB2 bootloader's network module that poses an immediate Denial of Service (DoS) risk. This flaw is a Use-after-Free issue, caused because the net_set_vlan command is not properly unregistered when the network module is unloaded from memory. An attacker who can execute this command can force the system to access memory locations that are no longer valid. Successful exploitation leads directly to system instability, which can result in a complete crash and halt system availability
🎖@cveNotify
🚨 CVE-2025-54771
A use-after-free vulnerability has been identified in the GNU GRUB (Grand Unified Bootloader). The flaw occurs because the file-closing process incorrectly retains a memory pointer, leaving an invalid reference to a file system structure. An attacker could exploit this vulnerability to cause grub to crash, leading to a Denial of Service. Possible data integrity or confidentiality compromise is not discarded.
🎖@cveNotify
A use-after-free vulnerability has been identified in the GNU GRUB (Grand Unified Bootloader). The flaw occurs because the file-closing process incorrectly retains a memory pointer, leaving an invalid reference to a file system structure. An attacker could exploit this vulnerability to cause grub to crash, leading to a Denial of Service. Possible data integrity or confidentiality compromise is not discarded.
🎖@cveNotify
🚨 CVE-2025-61661
A vulnerability has been identified in the GRUB (Grand Unified Bootloader) component. This flaw occurs because the bootloader mishandles string conversion when reading information from a USB device, allowing an attacker to exploit inconsistent length values. A local attacker can connect a maliciously configured USB device during the boot sequence to trigger this issue. A successful exploitation may lead GRUB to crash, leading to a Denial of Service. Data corruption may be also possible, although given the complexity of the exploit the impact is most likely limited.
🎖@cveNotify
A vulnerability has been identified in the GRUB (Grand Unified Bootloader) component. This flaw occurs because the bootloader mishandles string conversion when reading information from a USB device, allowing an attacker to exploit inconsistent length values. A local attacker can connect a maliciously configured USB device during the boot sequence to trigger this issue. A successful exploitation may lead GRUB to crash, leading to a Denial of Service. Data corruption may be also possible, although given the complexity of the exploit the impact is most likely limited.
🎖@cveNotify
🚨 CVE-2025-61662
A Use-After-Free vulnerability has been discovered in GRUB's gettext module. This flaw stems from a programming error where the gettext command remains registered in memory after its module is unloaded. An attacker can exploit this condition by invoking the orphaned command, causing the application to access a memory location that is no longer valid. An attacker could exploit this vulnerability to cause grub to crash, leading to a Denial of Service. Possible data integrity or confidentiality compromise is not discarded.
🎖@cveNotify
A Use-After-Free vulnerability has been discovered in GRUB's gettext module. This flaw stems from a programming error where the gettext command remains registered in memory after its module is unloaded. An attacker can exploit this condition by invoking the orphaned command, causing the application to access a memory location that is no longer valid. An attacker could exploit this vulnerability to cause grub to crash, leading to a Denial of Service. Possible data integrity or confidentiality compromise is not discarded.
🎖@cveNotify
🚨 CVE-2025-61663
A vulnerability has been identified in the GRUB2 bootloader's normal command that poses an immediate Denial of Service (DoS) risk. This flaw is a Use-after-Free issue, caused because the normal command is not properly unregistered when the module is unloaded. An attacker who can execute this command can force the system to access memory locations that are no longer valid. Successful exploitation leads directly to system instability, which can result in a complete crash and halt system availability. Impact on the data integrity and confidentiality is also not discarded.
🎖@cveNotify
A vulnerability has been identified in the GRUB2 bootloader's normal command that poses an immediate Denial of Service (DoS) risk. This flaw is a Use-after-Free issue, caused because the normal command is not properly unregistered when the module is unloaded. An attacker who can execute this command can force the system to access memory locations that are no longer valid. Successful exploitation leads directly to system instability, which can result in a complete crash and halt system availability. Impact on the data integrity and confidentiality is also not discarded.
🎖@cveNotify
🚨 CVE-2025-61664
A vulnerability in the GRUB2 bootloader has been identified in the normal module. This flaw, a memory Use After Free issue, occurs because the normal_exit command is not properly unregistered when its related module is unloaded. An attacker can exploit this condition by invoking the command after the module has been removed, causing the system to improperly access a previously freed memory location. This leads to a system crash or possible impacts in data confidentiality and integrity.
🎖@cveNotify
A vulnerability in the GRUB2 bootloader has been identified in the normal module. This flaw, a memory Use After Free issue, occurs because the normal_exit command is not properly unregistered when its related module is unloaded. An attacker can exploit this condition by invoking the command after the module has been removed, causing the system to improperly access a previously freed memory location. This leads to a system crash or possible impacts in data confidentiality and integrity.
🎖@cveNotify
🚨 CVE-2025-12543
A flaw was found in the Undertow HTTP server core, which is used in WildFly, JBoss EAP, and other Java applications. The Undertow library fails to properly validate the Host header in incoming HTTP requests.As a result, requests containing malformed or malicious Host headers are processed without rejection, enabling attackers to poison caches, perform internal network scans, or hijack user sessions.
🎖@cveNotify
A flaw was found in the Undertow HTTP server core, which is used in WildFly, JBoss EAP, and other Java applications. The Undertow library fails to properly validate the Host header in incoming HTTP requests.As a result, requests containing malformed or malicious Host headers are processed without rejection, enabling attackers to poison caches, perform internal network scans, or hijack user sessions.
🎖@cveNotify
🚨 CVE-2025-13465
Lodash versions 4.0.0 through 4.17.22 are vulnerable to prototype pollution in the _.unset and _.omit functions. An attacker can pass crafted paths which cause Lodash to delete methods from global prototypes.
The issue permits deletion of properties but does not allow overwriting their original behavior.
This issue is patched on 4.17.23
🎖@cveNotify
Lodash versions 4.0.0 through 4.17.22 are vulnerable to prototype pollution in the _.unset and _.omit functions. An attacker can pass crafted paths which cause Lodash to delete methods from global prototypes.
The issue permits deletion of properties but does not allow overwriting their original behavior.
This issue is patched on 4.17.23
🎖@cveNotify
GitHub
Prototype Pollution Vulnerability in Lodash `_.unset` and `_.omit` functions
### Impact
Lodash versions 4.0.0 through 4.17.22 are vulnerable to prototype pollution in the `_.unset` and `_.omit` functions. An attacker can pass crafted paths which cause Lodash to delete me...
Lodash versions 4.0.0 through 4.17.22 are vulnerable to prototype pollution in the `_.unset` and `_.omit` functions. An attacker can pass crafted paths which cause Lodash to delete me...
🚨 CVE-2026-24842
node-tar,a Tar for Node.js, contains a vulnerability in versions prior to 7.5.7 where the security check for hardlink entries uses different path resolution semantics than the actual hardlink creation logic. This mismatch allows an attacker to craft a malicious TAR archive that bypasses path traversal protections and creates hardlinks to arbitrary files outside the extraction directory. Version 7.5.7 contains a fix for the issue.
🎖@cveNotify
node-tar,a Tar for Node.js, contains a vulnerability in versions prior to 7.5.7 where the security check for hardlink entries uses different path resolution semantics than the actual hardlink creation logic. This mismatch allows an attacker to craft a malicious TAR archive that bypasses path traversal protections and creates hardlinks to arbitrary files outside the extraction directory. Version 7.5.7 contains a fix for the issue.
🎖@cveNotify
GitHub
fix: properly sanitize hard links containing .. · isaacs/node-tar@f4a7aa9
Fix: https://github.com/isaacs/node-tar/security/advisories/GHSA-34x7-hfp2-rc4v
The issue here is that *hard* links are resolved relative to the unpack
cwd, so if they have `..`, they cannot possi...
The issue here is that *hard* links are resolved relative to the unpack
cwd, so if they have `..`, they cannot possi...
🚨 CVE-2026-1961
A flaw was found in Foreman. A remote attacker could exploit a command injection vulnerability in Foreman's WebSocket proxy implementation. This vulnerability arises from the system's use of unsanitized hostname values from compute resource providers when constructing shell commands. By operating a malicious compute resource server, an attacker could achieve remote code execution on the Foreman server when a user accesses VM VNC console functionality. This could lead to the compromise of sensitive credentials and the entire managed infrastructure.
🎖@cveNotify
A flaw was found in Foreman. A remote attacker could exploit a command injection vulnerability in Foreman's WebSocket proxy implementation. This vulnerability arises from the system's use of unsanitized hostname values from compute resource providers when constructing shell commands. By operating a malicious compute resource server, an attacker could achieve remote code execution on the Foreman server when a user accesses VM VNC console functionality. This could lead to the compromise of sensitive credentials and the entire managed infrastructure.
🎖@cveNotify
🚨 CVE-2026-33810
When verifying a certificate chain containing excluded DNS constraints, these constraints are not correctly applied to wildcard DNS SANs which use a different case than the constraint. This only affects validation of otherwise trusted certificate chains, issued by a root CA in the VerifyOptions.Roots CertPool, or in the system certificate pool.
🎖@cveNotify
When verifying a certificate chain containing excluded DNS constraints, these constraints are not correctly applied to wildcard DNS SANs which use a different case than the constraint. This only affects validation of otherwise trusted certificate chains, issued by a root CA in the VerifyOptions.Roots CertPool, or in the system certificate pool.
🎖@cveNotify
🚨 CVE-2026-46243
In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject userspace cifs.spnego descriptions
cifs.spnego key descriptions contain authority-bearing fields such as
pid, uid, creduid, and upcall_target that cifs.upcall treats as
kernel-originating inputs. However, userspace can also create keys of
this type through request_key(2) or add_key(2), allowing those fields to
be supplied without CIFS origin.
Only accept cifs.spnego descriptions while CIFS is using its private
spnego_cred to request the key.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject userspace cifs.spnego descriptions
cifs.spnego key descriptions contain authority-bearing fields such as
pid, uid, creduid, and upcall_target that cifs.upcall treats as
kernel-originating inputs. However, userspace can also create keys of
this type through request_key(2) or add_key(2), allowing those fields to
be supplied without CIFS origin.
Only accept cifs.spnego descriptions while CIFS is using its private
spnego_cred to request the key.
🎖@cveNotify
🚨 CVE-2026-48558
SimpleHelp versions 5.5.15 and prior and 6.0 pre-release versions contain an authentication bypass vulnerability in the OIDC authentication flow. When OIDC authentication is configured, identity tokens submitted during login are accepted without verifying their cryptographic signature. In a vulnerable configuration, a remote, unauthenticated attacker can submit a forged token containing arbitrary identity claims to obtain a fully authenticated technician session. In some configurations, this may also allow bypass of multi-factor authentication. No user interaction is required.
🎖@cveNotify
SimpleHelp versions 5.5.15 and prior and 6.0 pre-release versions contain an authentication bypass vulnerability in the OIDC authentication flow. When OIDC authentication is configured, identity tokens submitted during login are accepted without verifying their cryptographic signature. In a vulnerable configuration, a remote, unauthenticated attacker can submit a forged token containing arbitrary identity claims to obtain a fully authenticated technician session. In some configurations, this may also allow bypass of multi-factor authentication. No user interaction is required.
🎖@cveNotify
Horizon3.ai
CVE-2026-48558: SimpleHelp Auth Bypass IOCs
Learn how to identify indicators of compromise associated with CVE-2026-48558, a SimpleHelp OIDC authentication bypass vulnerability discovered by Horizon3.ai.
🚨 CVE-2026-46331
In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix pedit partial COW leading to page cache corruption
tcf_pedit_act() computes the COW range for skb_ensure_writable()
once before the key loop using tcfp_off_max_hint, but the hint does
not account for the runtime header offset added by typed keys. This
can leave part of the write region un-COW'd.
Fix by moving skb_ensure_writable() inside the per-key loop where
the actual write offset is known, and add overflow checking on the
offset arithmetic. For negative offsets (e.g. Ethernet header edits
at ingress), use skb_cow() to COW the headroom instead. Guard
offset_valid() against INT_MIN, where negation is undefined.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix pedit partial COW leading to page cache corruption
tcf_pedit_act() computes the COW range for skb_ensure_writable()
once before the key loop using tcfp_off_max_hint, but the hint does
not account for the runtime header offset added by typed keys. This
can leave part of the write region un-COW'd.
Fix by moving skb_ensure_writable() inside the per-key loop where
the actual write offset is known, and add overflow checking on the
offset arithmetic. For negative offsets (e.g. Ethernet header edits
at ingress), use skb_cow() to COW the headroom instead. Guard
offset_valid() against INT_MIN, where negation is undefined.
🎖@cveNotify
🚨 CVE-2026-8896
The MIR blocks and shortcodes plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'title' attribute (and other attributes such as 'ready_animation_text') of the 'msc_stats' shortcode in versions up to, and including, 1.0.0. This is due to insufficient input sanitization and output escaping on user supplied shortcode attributes inside the msc_stats() rendering function. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
🎖@cveNotify
The MIR blocks and shortcodes plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'title' attribute (and other attributes such as 'ready_animation_text') of the 'msc_stats' shortcode in versions up to, and including, 1.0.0. This is due to insufficient input sanitization and output escaping on user supplied shortcode attributes inside the msc_stats() rendering function. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
🎖@cveNotify
🚨 CVE-2026-47110
Tiptap for PHP before version 2.1.1 contains an input validation vulnerability that allows authenticated attackers to cause a denial of service by submitting Tiptap JSON with the attrs.href field set to an array instead of a string, causing an unhandled TypeError in the Link::isAllowedUri() function when passed to preg_match(). Attackers can persist malformed JSON records that permanently crash the server-side HTML rendering pipeline for all subsequent viewers of that record until the database entry is manually repaired.
🎖@cveNotify
Tiptap for PHP before version 2.1.1 contains an input validation vulnerability that allows authenticated attackers to cause a denial of service by submitting Tiptap JSON with the attrs.href field set to an array instead of a string, causing an unhandled TypeError in the Link::isAllowedUri() function when passed to preg_match(). Attackers can persist malformed JSON records that permanently crash the server-side HTML rendering pipeline for all subsequent viewers of that record until the database entry is manually repaired.
🎖@cveNotify
GitHub
Merge pull request #94 from ueberdosis/fix/prevent-typeerror-on-link · ueberdosis/tiptap-php@74bfb7b
Fix: Prevent TypeError when link href is not a string
🚨 CVE-2026-56768
Seahub before 13.0.23 does not enforce SHARE_LINK_LOGIN_REQUIRED on GET /api/v2.1/share-link-zip-task/, allowing unauthenticated users to bypass authentication. Attackers with a folder share-link token can call the GET endpoint to obtain a fileserver zip token and download entire shared directory trees.
🎖@cveNotify
Seahub before 13.0.23 does not enforce SHARE_LINK_LOGIN_REQUIRED on GET /api/v2.1/share-link-zip-task/, allowing unauthenticated users to bypass authentication. Attackers with a folder share-link token can call the GET endpoint to obtain a fileserver zip token and download entire shared directory trees.
🎖@cveNotify
GitHub
Update share_link_zip_task.py · haiwen/seahub@162cdda
The web end of seafile server. Contribute to haiwen/seahub development by creating an account on GitHub.